XDAmanipulator is RUU dependent? - MDA, XDA, 1010 Software Upgrading

I've seen XDAmanipulator couldn't show any option about IMEI, call duration reset in my lastest RUU 6.24 or A.33.02. I've downgraded it back to Developer version SER v12 but I couldn't see it again. I've seen that option at the very first time I used XDAmanipulator at the original RUU version.
Currently XDAmanipulator can only show the SIM lock option. I love those extra options to reset call timer and changing IMEI, and it seems to be impossible with the new RUU. I have the original boot loader 5.15 so it's not the problem.
Some guru please enlighten me.
Thanks
MDD
PS: downgrading RUU is also not an option as well.

Related

No Radio help please T.T

Hi.
Well this is the problem. I have a sx66 and no mather wath radio version i flash., no mather how many times i run the xdadev_all_unlock-v1.6 and xdadev_all_unlock-v1.5 it stills locked.
When i run the xdadev_all_unlock-v1.6 is shows that the cellphone is unlocked but when i place my sim card it stills say “invalid sim card”, i tried with ten sim in while running the program and with the sim out as well and its the same.
I repeat the unlocking process with all radio versions from R_1.06.02 to Radio_1.15 type I and II, and again “invalid sim card”.
Oh yea and i read all the wiki and all the threads, maybe i lost something.
Can someone help me please???
Thts the end of the line my friend..i too had a similar problem with my Hima..unfortunately i had to replace it
Have you tried flashing back to WM2003?
Upgrade the Radio to 1.15
then upgrade to WM5/6
Regards
David
I had a similar (not the same though) problem in the past: what I suggest is that you go back to WM2003 (you'll hopefully find out that your fone is unlocked), then upgrade your radio to 1.15 and you can upgrade to WM5/6/6.1 (as you wish)...
Hope this helps

Help pls! Can't USPL or upgrade radio or rom anymore

I posted this in the general forum but after some consideration felt it may get more views/help here so I apologise for the double posting ~ ~
Hi,I have an xda orbit (O2 uk) and I ran the USPL super CID on it which went thru fine. I then did an OS upgrade from the official O2 website to WM6. However my phone wouldnt make calls or accept calls. The signal bars were initially low which made me suspect the radio not being optimum. Tried to upgrade the radio from 3.06.90 to 3.08 or 3.19 but it kept on giving an error 270 - file corruption,tried flashing to another rom and still the same error.I then tried to re -USPL it and even that wont take... Can someone please help me out with this as I am at my wits end to a solution...
ok...update so far...repeated the flash over and over again, Hard reset and moved the enable and cert rapi to the xda and ran them there first after taking out the sd card. finally it took after a few more atempts. I then ran artemis 20273 rom which flashed easily....HOWEVER even though the signal bars are still up I cant call out or receive calls. Dialling out ,the call disconnects immediately even before it rings (like 0.5secs after i hit the send key). If I call the phone I get a message that calls are not currently being connected to that number! (i know the sim cards working as its my main number) Anyways run uspl again and flash radio to 3.18...goes thru easily but still no calls in and out. Is there anyone with an idea as to the problem or solution.

Help: Cant Make Calls

I have Qtek 2020 with Rom CE Version 1.72WWE, but every time i try to upgrade to new roms:
(Previously Sundream's WM 6.5 WWE) and (Currently Syed Ather's WM 6.0)
Its giving me issues related to my network.
Signals are fluctuating, i cant make calls, neither recieve them, get messages in delay time more often, It avoids making me save contacts in sim card but after several attempts it succeeds.
Please Help me out. I am not getting this issue when i downgrade back to my Official Qtek 2020 1.72 Rom.
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Thanks for Reply
Jadel said:
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Click to expand...
Click to collapse
Yeah let me tell you all the necessary Information
Official Qtek 2020 Rom Version: 1.72.00
Official Qtek 2020 Radio Version: 1.14.00
Upgraded to:
Syed Ather's WM 6.0 Profession (Currently)
Radio Version: 1.17.00
-------------------------------------
It is : PH10B
Bootloader Version : V1.04
My Network Details
Network Name: Ufone
Network Country: Pakistan (ASIA)
Details of How I Flashed My Roms
I went to Boot Loader First: (DPad+Power+Reset) (V1.04)
Attached it to my Laptop through its Cradle (Windows XP Used)
Serial changed to USB
Loaded HimaupgradeUT_NoID.exe file (dont remember exact Name)
and Upgrade the roms + Radio Later
Got Congratulation Screens
Hard Reset By (Camera+Record Button+Reset)
Using the NO,YES,YES things and Pressing DPAD
Important Thing to tell you
1-I didnt take out my Storage Card not even SIM Card of My Network Provider when Flashing both times the different roms.
Please Any one here to help me out

Get no service when I flashed a rom

Hi there, I flashed \duttys and Miris roms but no I get no service.
I had a stock rom and installed the new radio and I aslo flashed the new radio, can anyone help?
momagic said:
Hi there, I flashed \duttys and Miris roms but no I get no service.
I had a stock rom and installed the new radio and I aslo flashed the new radio, can anyone help?
Click to expand...
Click to collapse
No service as in no signal or no service as in phone/dialler cannot ring anyone similar to flight mode? When phone starts up do you get a greenish distortion which is fixed by simply pressing power on/off button?
Moved out of dev
i also had this prob after flasing to duttys, no service and the strange scrambled colours that can be fixed by pressing the on and off switch, havnt tryed re flashing again yet though
take a look at your phone settings. open your dialer, go to menu/options now select the band tab. make sure it is set to you providers band or set it to auto.
Me too after flashing Dutty's latest.
Hard reset doesn't help.
"Connection settings" app doesn't appear to run after flashing...
Not a signal issue.
Can't start phone...
Any ideas please?
pickie said:
i also had this prob after flasing to duttys, no service and the strange scrambled colours that can be fixed by pressing the on and off switch, havnt tryed re flashing again yet though
Click to expand...
Click to collapse
If you are experiencing the scrambled colours it means you have not followed correct procedure to flash Duttys rom. Duttys rom is based on 1.56 or 1.57 depending on which version i.e. V3.4 etc so you'll need to put USPL or HSPL onto your device first and then flash a HTC 1.56 based rom
All this and proper procedure can be found in cRaCKwHoRe's guide to flashing 1.56+ based roms. Can be found in my signature
I sent my device on repair, also after constant flashing of ROMS (doesnt mean duttys fault) but the device constantly droped calls on 3G or GMS.. I called them today, they reflashed original ROM and tested the phone few days, no phone drops anymore..
They will test it few more days, hopefully my prob. will be fixed.
double post plesase delete.

Phone will not connect to network

Hello All,
I upgraded my EXEC to WM6 with the ROM of lucathebig. I did not upgrade the radio rom.
I don't know how it happened but, every time I switch it on, even without the sim card in, I can't access the phone settings! Or even the dialpad for that matter.
When I click on the signal icon, the balloon comes on but says "The phone is off"
When I tap settings nothing happens.
Please note that it was working a couple of days ago. I reset it to factory defaults but nothing happened.
Has anyone else got any suggestions? I will try to avoid flashing the ROM again and I'll keep it as the last option.
Update:
I noticed that there's no Radio version or IMEI on the system information on my phone so I figured that the radio got corrupted or something like that.
I tried to flash the Radio but i get the 114 error from the upgrade tool.
I tried all sorts of different upgrade tools with different radio version but none of it worked...
I am now downloading the official O2 update Xda_Exec_Upgrade_v113188.exe and try to install this instead to see if it fixes the Radio.
Has anyone found a solution for the 114 error? I have read tens of posts but can't seem to fins anything that helps. The people who solve it, use different versions of the update tools or they remove the USB hubs or try the upgrade 3 times.
Help ..?
I tried O2 update but the upgrade executable gave me a country ID error.
So I took the WM ROM and the Radio Rom from the zip file and tried to upgrade both but on the the WM ROM was updated. The Radio rom still gives me an error when I try to Flash...
Ohhhh this is so dissapointing.....

Categories

Resources