ROM upgrade to PPC2003 - MDA, XDA, 1010 Software Upgrading

I am wanting to upgrade my xda1 to ppc2003. I do not want to change the RSU.
Has anyone done this with their xda1, on O2 in the UK?
If so, which ROM version is best to use. I have been to
http://lumpistefan.dyndns.org/ but as an amature at this and seen so many saying they have fried their machines I am dubious on a hit and miss approach. I did apply the upgrade on the O2 site for both the ROM and RSU, but I did have instructions to follow.
Which is also the best way of installing. If an SD card, can this have other things on it or does it have to be blank?
A step by step guide would be much appreciated.
Thanks

Related

Novie in ROM Upgrade

Hello everyone. I have a two month old xda 1 and I am thinking of upgrading the ROM (OS) to WM 2003. I have created the ROM (4.00.05) at http://kitchen.romanweb.com and downloaded the exe. I have also read the pitfalls of how upgrading the ROM can completely render my xda useless. Are there any steps that I can take so that if the upgrade fails then I restore my pda's old OS and functionality (being a DBA it would be bit like a database restore)? Those users that have upgraded successfully, are there any pitfalls to look out for or any literature on the upgrade process? One more question, when I do upgrade the OS, will the phone work as normal or do I have to do something to "link" it to the OS?
Thank you for your advise.
Read more posts...way more and don't use the .exe to upgrade your device. Download the OS Toolset, backup your current ROM, and then upgrade the ROM with an .nb file which you can create in the kitchen. FYI 4.00.11 is more stable than .05.
Where can get my hands on the OS toolkit. Also, will the 4.00.11 work on a UK o2 XDA?
http://xda-developers.com/phpBB/viewtopic.php?t=2189. As far as a US ROM working in the UK...I don't know. It should for the OS is independant of the radio stack. Just back up first to be safe and don't use an .exe to upgrade or you won't be able to go back without difficulty!

what upgrades should i do to an o2 that i have just received

i have just put my sim card in but the OS is
ROM version 3.14.17 ENG
ROM date 10/11/02
Radio verison 4.16
Protocol Version 32554
are there any upgrades or programs i should add or is it fine as it is?
any suggestions would be greatly appreciated :wink:
I would suggest leaving the radio stack alone if it works ok. You can backup your current rom to sd card then go cook a rom with lots of extra features and software in the unused rom space at one of the kitchens.
Hi ... congratulations first
Your ROM is PPC2002, so you may consider upgrading to WM2003 (it's not essential tho :wink: ).
In all cases, if your Radio is working fine (the phone part), just do NOT touch it!!
Take enough time to read in this forum before any steps or questions ... Good luck
O2 XDA and WM2003
I just saw posts on this thread, is it possible (safe?) to put WM2003 on an O2 XDA. What ROM upgrade should be used? I ask because I got impression that 2003 upgrade was vendor sensitive and you had to use (if they did one) your vendors upgrade. (i.e. Siemens, etc). Thanks for help, maybe I get to update after all !!
Alan

Want to uninstall WM2003 and go back to O2 original ROM

Hi!
Installed T-Mobile WM2003 from the ROM kitchen.......... Network very weak and the phone has become very slow. Now I want to move back to O2 original ROM (WM2002).
When I try to install the ROM I get an error message :
"ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype"
and the 02 ROM installer cannot communicate with my XDA.
Can someone please help me get back the original 02 ROM, with sim unlocked???
Really need some help here. :?:
I loved my phone as it was and I was stupid to experiment with it !!
regards ,
Diki
If you used the kitchen to cook your ROM then it shouldn't have any impact on the RSU part. Plz give more details on your RSU version, your network MHz and what types of problems you have ?
BTW, did you upgrade to 4.01.00 or 4.01.16 ?
To get back to PPC2002, you can use the SD method
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
I upgraded it to 4.01.16
Radio version installed is 4.21.00
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Going back to 2002
I received from a friend a pre-release version of t-mobile ppc2003 a few months ago. He put it on my phone via a sd flash. T-mobile has just released (for free) on their website a final release of ppc 2003 and the one I am using is somewhat unstable at times. Does anyone happen to have t-mobile ppc2002 so that I can upgrade. Thanks.
Diki said:
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Click to expand...
Click to collapse
a. there is a bug in WM2003 and there is a tiny program that should be placed in the \windows\startup directory to solve it. The program is called Clear_Notify.exe ... simple search and you will find it.
If not, then it's a Radio problem that impacts the ROM part. Few hard resets may solve it.
b. if you mean the indicator on the window tray, forget about it ... the point is the ability of making/receiving calls. If you face real problems, I think it's the 4.21 RSU, but be extreamly careful ... upgrading the RSU is very risky especially with this RSU 4.21 on your device!!!!!!.
Good luck
tellan said:
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
Click to expand...
Click to collapse
1. Can you please send me the steps for installing the O2 OS on a SD card?
2. and once it is installed and working, can I just go ahead and delete all the folder (windows program files etc) from the phone memory?
What are the risks involved in writing ROM to SD Card?
I have no idea of this. Can you please help me?
Hi Diki,
Did you get a soution to your problem yet? I elaborate on the same problem.
Thanks for your answer
Norbert
I have the same problem and I still don't know what to do. Please elaborate if you can.
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX!
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX!

How to downgrade RSU or swith from 900/1900 to 900/1800

Hi all,
Thanks to this thread http://forum.xda-developers.com/viewtopic.php?p=39630#39630 and especially remarks from hb88xx, I successfully managed to recover from my own mistakes (that many people have done as well apparently).
Here is the story:
* I bought my O2 xda from Telstra in Australia where the band is 900/1800. It is a PW10A1 device.
* I then cooked a rom with Yorch's kitchen and as many others, didn't read enough posts before doing so and opted for the infamous EXE method as I had successfully upgraded once before from O2 using this method.
* As my bootloader is 5.17 and my cooked rom was based upon T-Mobile, I was stuck: impossible to downgrade the bootloader because of TMO checks (the wallaby patch doen't work) and impossible to up/downgrade using the SD card method because of the bootloader version.
* Still, I could use my device but my WM2003 was very buggy.
* Out of hope, I decided to upgrade to another TMO rom, but this time an official one (4.01.16) as I read it was quite stable.
* That was the BIG mistake as I also did the RSU upgrade and I ended up with a 900/1900 device, having the 4.21 RSU.
* I tried many of the tips I read from this forum, but none of them worked and I had to buy a cheap cellphone to use my SIM card on it and keep my xda as a pda.
Basically, what you need to do is the following:
* Using the attached file or the official TMO upgrade, extract and copy the files into the \Windows directory of the xda.
* Detach it from the craddle and run the EXE on it.
* It says things in german (performing upgrade) and then a final status (whatever "erfolreich", ie successful). Click OK and finally, reboot the device.
* You now have a 3.23.11 RSU.
Once again, thanks a lot to all participants to this forum and especially hb88xx.
And thanks also for the remark below
Regards,
Bob.
Hey mate ...
It's great that you have learned this lesson, but now you may cause troubles to some unexperienced users by posting this file with this name
Simply, what you have posted is the typical RSU upgrade 4 files you should find in ANY RSU exe file, but because you posted this file with the name RSU_Fix, I 'm afraid some one will just use it with a B device thinking it will solve his problem and endup with a dead RSU.
So, plz remove this file or rename it RSU_3_23.zip or so
BobMorane said:
Hi all,
Thanks to this thread http://forum.xda-developers.com/viewtopic.php?p=39630#39630 and especially remarks from hb88xx, I successfully managed to recover from my own mistakes (that many people have done as well apparently).
.....
Bob.
Click to expand...
Click to collapse
Hi BobMorane.
I am having the same problem as yours, upgraded to WM2003 and can't go back to ppc2002.
Sounds like You have reverted your xda rom to ppc2002, didn't you?
Don't quite understand those that listed in your post. Could you explain a little more?
Thanks.
Raymond
XDA1 bootloader v5.17
Hi bob,
I'm a little confused - I understand RSU 4.21 is for 900/1800. It is the RSU that o2asia currently distributes.
My XDA is a PW10A1 and currently has RSU4.21 (from o2asia), Wallaby 5.17 (no idea where it came from... am guessing o2asia as well) and T-mobile WM2003 4.01.16 ENG (.EXE cooked from Lumpistefans)
As a result, I'm stuck as well. However, I can still use my phone on GSM900/1800; as long as I avoid settings-phone-band; all is well; but if I do wander into that, a reset to the bootloader-calander-gsm900/1800 solves the problem (albit temporary...)
Anyway, I'm meeting up with a friend to borrow a SD card+reader over this weekend or the next, so that I can change the ROM (get out of theT-mobile WM2003 rut). Am a little concerned about what you wrote however:
BobMorane said:
* As my bootloader is 5.17 and my cooked rom was based upon T-Mobile, I was stuck: impossible to downgrade the bootloader because of TMO checks (the wallaby patch doen't work) and impossible to up/downgrade using the SD card method because of the bootloader version.
Click to expand...
Click to collapse
Could you please eleborate more on how the wallaby patch didn't work? How did downgrading the RSU to 3.23.11 help? Are you able to replace your T-mobile ROM or Wallaby 5.17 following that? Or are you still stuck, but at least the phone works on GSM900/1800?
More information please?
Hi,
Some anwers below.
RaymondB :
Actually, I didn't revert to PPC202 and I still enjoy the 2003 features, but I managed to get rid of a 900/1900 issue.
xdagirl :
My problem was slightly different as I did not have the RSU4.21 for asian devices. My aim with the post was more to explain how to get out of the original T-Mobile rom lock-in (I did not use a cooked one because of my 5.17 wallaby). I assume you can do it as well with the asian RSU4.21. If you have it, I can try it and let you know.
As for the 5.17 wallaby issue, I was stuck in the midst of 2 issues : the 5.17 doesn't let you access the SD card method and you need first to downgrade it to 5.15. The patch to do this can't be used if you have installed a T-Mobile rom as it blocks the connection. I couldn't get around this and that's the reason I upgraded to the offical TMO rom.
BobMorane said:
Hi,
Some anwers below.
RaymondB :
Actually, I didn't revert to PPC202 and I still enjoy the 2003 features, but I managed to get rid of a 900/1900 issue.
......
Click to expand...
Click to collapse
Thanks for your reply, Bob.
So you are still with WM2003. Is this the new official one or the buggy one that you've had earlier. If its the new one, how did you do the flashing?
Did you downgrade the bootloader to v5.15?
I really wish to go back to ppc2002, as the current one seems to be quite unstable. At times, it reset itself, especially when some changes was made to some particular today plugin. It also turn on itself, which eat away the precious battery power. Also, the phone setting function and the band switching utilities will hard reset the xda.
Sorry for so much bugging. Hope your could help.
Thanks and cheers.
Raymond
XDA1 bootloader v5.17

Need help upgrading my Qtec 2020i

Hey!
iv been looking over this forum for about 4 hours, and i am totaly confused :S
what do i need to upgrade?
it doesnt have to be a norwegian rom, as long as it works
im new to "the game" and i know nothing about my phone, other then that it is a Qtec, and its called 2020i
the rom version is 1.11.00 WWE
Radio version: 1.02.00.
wich by the look in this forum, seems somewhat old
i know this place isnt a helpdesk, but iv been googling and surfing forums for 2 days. and this place looked like it could maybe help me.
thanks for any respons
-Bateau
welcome
ur right its the place where u will learning everything about ur phone
before 6 month i was like u know nothing
but now i'm not expert but i know very very more
i have 2020i we called it alpine i upgrade my rom with pug rom (O2 1.11.162 uk radio 1.04) and its great
Best Alpine ROM
Here is the direct link to the PUG modified ROM, which is the best you get
Standard 162 ROM, Radio 1.04, improved camera and extra Bluetooth profiles:
ftp://xda:[email protected]_Fixed.rar
Check this link for plenty of info.
http://forum.xda-developers.com/showthread.php?t=258480
DAz
could you desribe the instalation process or a link where it placed
ps
i also donot now any sing about my qtek 2020i
Help a Noob
Hi,
I recently aquired a Qtek 2020i, and this is my first time in the PDA world, but it hangs all the time. So I'm hopping you guys can help me to update the ROM to something more stable.
I've been around the forum and found out how to backup my ROM to a SD card, so that is what i'm going to do first... to be safe.
Now I've downloaded this ROM version. And, by the read me file included in the rar file, it will be very simple to run the update... Actually I thought it would be very much harder
The question is:
Must I thake any special security steps other than the original ROM backup? Or can I just go for the update?
Thanks for any help you can get me
Done
Update successfull
I'm gone evaluate this ROM... Hope it's better than original

Categories

Resources