Related
I have it!!!!! Send me a email and i will send you the file with all the instructions to repair your dead gsm "part" of the xda. it worked with my qtek 1010 and i think that it works with any other. Ricardo Gomes
[email protected]
Could you please post the solution here ?
i´m doing a zip file with all the instrutions and i will put it to download soon. please be patient
the file is ready
you can download the solution for the radio dead problem in http://qtek.no.sapo.pt/repair.zip
Ricardo Gomes
[email protected]
Thanks.
Anyone tried that?
Since my phone is working perfect now, it is nonsense to try that
It didn't work for me.
GREAT!!!!
it worked for me in my qtek 1010.
Mirror on xda-developers
I downloaded Ricardo's repair.zip file and took the liberty of mirroring it on xda-developers, since my download went at a whopping 200 bytes per second.
We've seen this recipe before, and it does appear to fix at least some of the problems caused by RSU upgrades not finishing.
http://xda-developers.com/repair.zip
faild
hi guys
still stop at 1% and showed massage
((flash failed! Press OK restart your device))
any help
hi guys!
I have this problem also.
Still stop at 1% and showed massage
((flash failed! Press OK restart your device))
Just try to do following: start 3.23 ROM update to extract RSUpgrade.sa.CAB and place it to SD card instead of file found in repair.zip.
The situation you describe looks like your device died while flashing new 3.23 version. So you may try to continue process with 3.23 version instead of old one. This is because 3.23 don't allow to "downgrade".
Hi AE !
Where can I find 3.23 ROM file ?
Thx for your helps.
If your device died while trying to upgrade to 3.23 radio, the CAB-file should be found in "C:\Program Files\Radio Stack Upgrade Utility".
My device died while trying to upgrade to radio 3.19 but I trying to copy to SD all Radio upgrade, but don't work. Still stop on 1% and error message is "Flash failed. Press OK to restart device".
Other tips ?
Radi ROM
i have the same pb the alnasser and sebi; i have tried everything; what we need is a new rom version for the radio and not an upgrade; also while using boot loader and if i try to copy the GSM rom from a working phone i got a message saying: connect to RS232 and run PC monitor; i have USB and i do not know what is PC monitor...any ideas???
It worked for me also, but with slight changes
Hi,
The soloution above worked for me after a little trial and error.
I was trying to upgrade to new UK Radio Stack but flash failed in the middle of upgrade (probable because the keyboard popped up onto the screen for no apparant reason, then locked up).
However, after much wailing and gnashing of teeth, I found your website!!
I installed the Files onto an SD card as described above, and although the XDA was going painfully slowly (about 3 mins to warm reset). managed to get to the today screen. I ended up pusing the "record button" repeatedly to try and get some response out of the machine, finally it auto ran the program on the SD card, only to be told that flash failed
Undeterred I repeated the exerscise with the other RSUpgrade.sa.cab
file, this gave the same result!!
However I soon realised that this cab file is kept within the .exe file of the original upgrade I tried to do, so... Using winzip I extracted the relevent RSUpgrade file for my XDA and put that file on the SD card instead.
It Worked!!!
Consequently I conclude that if the file fails or stops at 1% then it must be because it is NOT the correct file for your XDA, you need to use the correct upgrade cab file for you particular XDA.
Hope it helps someone else.
Essentially the watchword is "perseverence".
it starts but stop on 85%??!!
hi i have a dead xda and i'm trying to fix it but it stops on 85% sometimes on 83%,i'm using the copy of cab file to sd card and runnig it from xda anyone can tel me how to get over this?
now it stops on 1%
i have removed it from charger and put the file on the sd card,the progress bar went to 99% then flash failed,now it gives me that message on 1%,how to fix it??!!
Re: it starts but stop on 85%??!!
Anonymous said:
hi i have a dead xda and i'm trying to fix it but it stops on 85% sometimes on 83%,i'm using the copy of cab file to sd card and runnig it from xda anyone can tel me how to get over this?
Click to expand...
Click to collapse
Hi,
seems to be the same case as I had: I found version, which did not freeze in 1%, but in 85% all stopped.
I unfortunatelly don't exactly remember complete list of my steps, but THIS MAY BE IMPORTANT:
After I made cold restart, I saw radio upgrade progress bar ( If you can't see this, try to follow instruction about repair.zip solution, mentioned hereinbefore ). Radio upgrade progress window only flashed for a second or two, then disappeared and WIN CE ( trying to boot up ) painted its splash screen. After that WinCE froze with this screen.
BUT:
If you have a luck, radio upgrade may continue on background. After 10-15 mins upgrade was done, and after restart ... I saw normal radio version in bootloader, and it worked well !!!
Note 1:
I killed phone with latest radio upgrade ( maybe lack of space, maybe radio switched on ), so there was no way to use lower versions ( it leads to "1% problem" with downgrade )
Note 2:
When my steps was still unsuccessfull, I continued [up|down]grade WIN CE and Bootloader. Maybe it was solution, maybe not, I dont know. I did it because I thought it would solve some problems with space for radio installation. My second reason was, that it should stop neverending ( 1% freezing) radio upgrade window after each boot.
Note 3:
During these installation steps it seems to me that battery si getting weaker, and does not recharge. So I tried to revive WIN CE first to be able to recharge.
Some steps may be unimportant, based on my feeling how it may work.
Anyway,
MY MDA RESURRECTION SUCCEDED,
so I hope it helps.
Regards, Lu
Hello all.
i have been searching the forum for the solution of this problem, some guys suggested solutions that involve a file that is no longer available, upgrade.zip which is aparently a radio upgrade(or downgrade) made for the SD card (a startup.exe in a startup directory).
Well, having said that, i had to solve this problem last night, and here it goes.
after trying original ROM upgrades, all versions, 3.14,3.17,3.18~4.
nothing worked.
finally, i grabbed a copy of xda-developers's 1.1 ROM
and guess what!!!
the phone started up, gave me the screen allignment and the whole menu!
sure enough, ran file commander(that version did not have file manager) copied the RSU files over to the windows directory, and the exe file to the windows\startup and rebooted the phone.
it stopped at 1% again... NOW REMEMBER, i had an EMPTY BATTERY...
the 1% ERROR is a battery issue, that turnes into this issue when the modem upgrade FAILS.
so here is what i did. and you be the judge.
i ran active sync from the phone, and it did connect(while the upgrade program is still running) and left the room/
in 10 minutes i came back and the upgrade was completed, so here is what i think
i think that the RSU will still run if it was in the background!!! even with an empty battery(connected to the charger ofcourse.
i did not have much time to do anymore testing, but i am sure that someone with the same problem will make the time. the key from my experience is that the proccess will complete if it is in the background.
there u have it.
good luck.
i forgot to add that the upgrade i used was taken from yorch's page and it was the latest Tmobile, i had to downgrade later to an older version that i have to solve the network issue, but it was done(the downgrade) like a charm, i had a full battery then.
here is the Tmobile RSU link v6.24
http://www.yorch.net/downloads/ROMS/TMOradiostackupgradeR624 .zip
a 1.26 MB file.
Hi!
Now I'm taking a try (unfortantely I've found only the special edition rom 1.2).
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
One more thing: maybe the version of active sync counts? Mine was 3.8.
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
LumpiStefan said:
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
Click to expand...
Click to collapse
Thanks, Stefan! Maybe this one will help...
Hello to all, and mr stefan,
I upgrade my qtek 1010 with SFX56 windws 2003, it also upgraded my RSU, which is not working in Middle East. Kindly advise me how to downgrade or upgrade with other RSU. Thanks
your problem is in the network selection, search the forum for the proggy that changes it from 1900 to 900 and you should be OK.
i hate telling anyone to search i know how hard it is, but i do not have a clue where the proggy is, meanwhile, if i run across it, i will point it out,
if not, go to the bootloader, select GSM and change it from there, you will loose all data so backup first,
Good Luck.
search for "bandwith switch tool"..... good luck.
here it is on wiki
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
tell us if this fixes your problem.
if not, you will find links to radio upgrade on
[/url]http://lumpistefan.dyndns.org/tools/ thanks to LumpiStefan
for a great resource.
good luck.
never knew you can post as guest
well, again, let us know what happens.
hi all
I just picked up a XDA from a guy who screwed up the radio stack upgrade (it cosy me @$80 USD ) and im now on a mission to fix it...
using your advice I used the XDA developers rom 1.1, this got the phone to start up with the working today screen and menus etc....
I install/copy over the new RSU upgrade files over and reboot
but here is where i get a bit stuck...
I cant get into active sync fast enough before I get the 1% RSU upgrade error, so the upgrade wont run in the background, it just sits there....
how do you get into active sync before the error comes up?
cheers
MADMAX
I have up graded my rom from
ROM version 1.6.2.4 WWE
ROM date 11/15/05
Radio version 01.12.10
Protocol Version 4.0.13.23
Ext rom version 1.6.2.105
which came with my wizard in December to the new t mobile rom
ROM version 1.3.2.2 ENU
ROM date 9/29/05
Radio version 01.04.10
Protocol version 4.0.13.17
Ext rom version 1.3.2.102
now my TT5 has stopped working it just hangs on start up
It ran ok on the earlier rom anyone any ideas please help
Hi,
I have done that a number of times in setting my own devices and my friend's ones.
Use the step-by-step here:
http://forum.xda-developers.com/viewtopic.php?t=28386&highlight=complete+tomtom
I can't remember the exact cause, but I go back to this thread and work it from there on.
HiH,
Joe
I used the 5.21 upgrade on the old rom and that was ok worked a treat frist time but now it just hangs on start up :evil:
Anyone ????
Did you do the reg edit and the GPS control panel part?
And are all the same files on the miniSD card? My initial thought is that it's something to do with this. Like the whole damn lot, even though you can see half of them are not really needed, like the palm ones and licences, text files etc.?
Joe
I'm kicking myself as I only had this two weeks ago on a universal....
Yep everthing on the SD card is the same.
I had the old rom and TT5 worked a treat without the GPS reg hack
I hard resetted my phone updated the rom
Paired the GPS reciever the same as i did before ran the TT 5.21 same as before and nothing Ahhhhhh !!!! :evil:
E mailed tomtom support and got the reply
" If you are using the 5.21 upgrade for WM5 then tomtom should install and work this may be a hardware issue"
No sh!t sherlock !!!!
Ok, a bit naughty, but there's a version linked to here:
http://forum.xda-developers.com/viewtopic.php?t=34504&highlight=tomtom+crash
Try that one and see if it works.
Man this is buggin the **** out of me
Joe
EDIT: More here http://forum.xda-developers.com/viewtopic.php?t=34513&highlight=tomtom+crash
Now the plot thickens
Here's what's been done so far
1 hard reset
2 mini sd card cleared TT 5 map re installed this has been tried in a wizard with the old rom and it works so it's not a card or map issue.
3 no apps installed in the phone
4 TT 5 installed on the phone
5 GPS reciever paired with phone
Start TT5 which starts up
Select which country (English UK) ok
Select left or right handed ok
Select miles or kilometers ok
Select clock format. Slight hang but ok
Select which voice that's it the program just hangs and goes no further
Joe it really bugging the **** of me as well :twisted:
Ok, I had this bit on the Wizard Friday evening!!
What it was I think, was I had copied over the map files (the big cline etc.) and checked the currentmap.dat file's path in
\My Documents\tomtom
The bugger still didn't run. So, I went back to my original SD card, copied it all over (all the dross in the map folder I thought I didn't need) and this time it ran. It was something in the map folder on the card.
Joe
PS Sent u a PM
yo Fozzer
i have EXACTLY the same problem, did u fix it yet? its realy anoying me! crashing on the voice select screen after the re-install. please say u fixed it i cant be bothered reverting back to the old ROM.
i just figured out i dont have a my documents/tomtom directory can u post your "currentmap.dat"
thank you in advance
Here ya go, and edit with notepad if your path is different.
Joe
Yep Ill try to post it later on
I dont want to revert back to the old rom too as i havent got it saved any where and i dont know how to pull the rom from another Wizard
Now this is really getting on my wick :evil: :evil:
Jo
what rom are you using ?
Have you got Tom Tom running ???
Yes it works, and I am on t-mob vario:
Rom 1.6.2.4 wwe, 11/15/05
Radio 1.12.10
Protocol 4.0.13.23
Extrom 1.6.2.105
yes!! it works! ooo yeah!
thanks joe
all i had to do was put that file in my documents/tomtom and bingo!
goes past the voice select screen on onwards to tomtom!
phew what a load off my mind!
thanks again joe!
Yer welcome m8, just got to get Fozzer sorted now.
Joe
im sure it'll be the same problem, i figured out that for some reason since i have file syncronization on my Activesync, my computer likes to delete the currentmap.dat, just turn the file sync off and voila currentmap remains and tomtom works
Jimmy
any chance of step by step instructions how you did it PM me if you want
(Poulters You watching this post ???? PM me if you are)
its easy fozz just download the lovely file joe provided in this topic, make a folder called tomtom in my documents ..... mydocuments/tomtom and wack the file in there.
i have a wierd problem i had qtek 2020 with wm2003 and german rom, so i upgraded it to wwe wm6... it worked fine for a day, but msn refused to sign in so i installed windows live... since then it shows "no service" and phone and contacts apps fail to start but sms and gprs work fine...
i tried flashing it to wm6.1 and it works the same... i noticed one thing: after first upgrade, all data was gone but after this one all my sms and stuff (notes, etc.) were there... at this point i notice that there's one sms that can't be deleted or marked as read
also after every flashing, when i restart phonr, i get bunch of errors for apps that were in startup of previous wm...
when i checked device information, there wasn't anything standing for extrom version so i guess that's the problem but can't find any extrom upgrade files :|
thanks in advance
Which version of WM6.1 did you install and did you follow all instructions when installing?
Hello,
i am using P3400i windows Mobile 6 Professional CE OS 5.2.1622 (Build 18128.0.4.4) and i am getting a weird problem after using a while the device hangs and operates very slowly..... when i open my messages it hangs for a while and when i minimize it and go to the memory options there i can see that the program memory is increasing and decreasing again and again it continues until i softreset the device...... i tried hard resetting the device where everything is gone no messages nothing and noe it works fine, but when i restore my messages and try to use my message application to mesage... oll over happens again..... i dont no whether it is memory leak situation or not ..... i've around 30,000 messages including inbox sentbox.... i thought this is the problem but how it can be?? i thought may be its a virus thingy then i used dotfred's tast manager to view the processes running in background but i couldn't find out the suspicious process i can say that because i am a computer student and i've some knowledge about the process..... then i installed antivirus hoping may be it is hidden process but no it detects nothing... i also tried to upgrade the ROM but stopped myself as i am novice in these flashing the ROM area and confuse in which ROM to use as i dont want to brick my device.. is there anybody who can help me with this ?? i love my GENE device very much....
and do anyone have official ROM which can go with my GENE? as i no P3400i has no upgrades officially but custom ROMs...
GENE specifications:
ONBL 1.17.0000
SPL 1.17.0000
GSM 02.79.90
OS 1.17.0.0
ROM version : 1.17.720.1 WWE
ROM date : 03/07/08
Radio version : 02.79.90
Protocol version : 4.1.13.34
ExtRom version : 1.17.720.101
help??
Is there no one to help me out??
you can try new rom
see gene forum for more details
actually i've been through the gene forum but still very much confused to use any other ROM. Can you pleaze help me out wat ROM to choose.... and i dont want to brick my phone... :|
first you have to change your spl(i think you haven't done yet) for change your rom.You can try any rom,if you don't like rom try another