Has anyone come across this problem.
I have upgraded the rom on my xda ii, reinstalled tom tom nav2 & as soon as i try to run it, my xda ii freezes up and it becomes unusable. Is there anyway i can go back to the previous rom otherwise Tom Tom is going to be useless to me.
Thanks
Jase.
Try uninstalling the gps portion of tomtom, then reinstall it. Use the 2.09 gps upgrade file to reinstall. Its worth a try, this freezing/locking can happen if the wrong port is chosen for gps. <ake sure that settings/connections/incoming beams is unchecked also.
Try turning off the beam (infrared), the port it used conflicted with the port my wired HOLUX GPS used.
Nick
jrd31 said:
Has anyone come across this problem.
I have upgraded the rom on my xda ii, reinstalled tom tom nav2 & as soon as i try to run it, my xda ii freezes up and it becomes unusable.
Thanks
Jase.
Click to expand...
Click to collapse
Exactly same problem, turning off beams and changing gps port fixed, was very annoying....
Beams sux, it was running slooooooooooooooooow enough when it was on that i nearly chucked it out the window
Related
I'am allways used the tom tom navigation software in combination with a garmin etrex. Happilly joined using com1. However, after upgrading to rom 3.15.15 I lost com1. when trying to use com2 my xda almost isn't able to response anymore. So obviously something serious is conflicting.
Does this problem sounds familiar to you. Or does someone know how to enable the com1 again??
Thanks in advance
Make sure you have the IR autoconnect turned off.
It works, thanks. Sometimes life is simple if you know it
My blue tooth fortuna clip on will not respond to the XDAII with the updated rom, which suports serial ports. has anyone else had this problem, do I need to down load the BT tools patch again & if so can some one remind me of the web address
Ta
HI i have the GPSmart BT verision
and i have alos updated the ROm on my XDA II
all i can say is it works very very well i did have a delay when using
TOMTOM and that has now gone
Hope this help you out
I am also using the BT GPS Clip-on with the XDA II. Works perfectly after the O2 update. I'm using Tomtom 2 with the 2.09 GPS update from their website. Im not using it with the com port option, I'm using it as a Tomtom BT device.
Foruna clip on problems
I still can't get the tom tom gps driver to recognise / show information from the Clip on BT gps. I downloaded the latest driver from the tom tom site but still no luck. tom tom's gps drivers do not show the fortuna clip on. I have tried rebonding it with and without the serial port option. When I'm in the tom tom GPS page what GPS driver do I need and what com port do I select and do I need to set it up as com port 5 when I bond the gps????????
Well if you have the rom upgrade installed and you are using V 2.09 of the TOMTOM GPS drivers you can select
the device a TOMTOM Wireless GPS
and set the com port bit to Bluetooth GPS
I use this setup and have never had a problem
Hope this helps
I tried that but no luck, it would not show any satelite info on the gps pages. I notice in the blue tooth settings you can select com ports 4 & 5 for recieving and transmitting , what should these be set to? also when you bonded the fortuna, did you select the serial port option ?
Ta :x
Hi
It souds like you dont have the latest ver of the gps drivers fromtomtom installed
on V2.08 there was no mention of Bluetooth so i think you have that ver installed
And yes when i bonded with the GPSMART it asks me if i want to use the serial profile
Do you have ver 2.09 ? if not i can post it on here for you
pjcltd said:
Do you have ver 2.09 ? if not i can post it on here for you
Click to expand...
Click to collapse
Please do :lol:
OK here is the GPS Drives as from the TOMTOM website
pjcltd said:
And yes when i bonded with the GPSMART it asks me if i want to use the serial profile
Do you have ver 2.09 ? if not i can post it on here for you
Click to expand...
Click to collapse
sundownerspars said:
Posted: Sun Apr 04, 2004 20:38
I tried that but no luck, it would not show any satelite info on the gps pages.
what should these be set to? also when you bonded the fortuna, did you select the serial port option ?
Click to expand...
Click to collapse
I too have same problem - have 2.09 gps but now not getting info, it bonds ok, but won't display any tracked sats, do i need to say yes to serial when bonding?
Yes you must say to to it or it will not work
(that is if you have the updated Rom installed)
pjcltd said:
Yes you must say to to it or it will not work
(that is if you have the updated Rom installed)
Click to expand...
Click to collapse
All working now :lol:
now the back light drops out
I have tried reloading the ROM upgrade and reloading the Tom tom 2 software and latest drivers from the Tom Tom site (ver2.09GPS driver)
I still am having problems with the fortuna GPS. In tom Tom GPS it does not show any satelites and the little sat dish to PDA legends on the right hand side show no communication
Now the Back light drops out without warning and when I check the back light settings it has reverted to no back light on the battery power! (yes the battery is fully charged) and I keep getting a communication error popping up saying (cannot start communications with desk top computer" and the XDA 2 is not even in it's cradle
HELP!!!
I'm tempted to send it back to O2 for them to sort it out. :evil:
I have used fortuna gpsmart with xda2 with standard rom and had no problems, is it possible for you to download the launchrom from the O2 site and see if that will get you back where you started. You could also try unbonding everything then after loading the latest bthtools rebond and try that.
It worked fine with the original ROM & BT tools patch. I cant find the original rom on O2's site. May be I downloaded a corupt version even though it said updated ok? It took so long to down load on a dial up connection ( Damn XP at work on a broad band connection wont let any one apart from the administrator download programs!!!)
Do O2 send out discs with the rom update on them?
Also just noticed, when I try to turn it off on the power button all that happens is that the backlight turns off and the isplay is still there allbeit very faint. Still at least my BT200 works now!
I had the same problem for a few days after I got the Fortuna, but all went OK, not sure how I did it really, just kept, trying
I wonder if anyone can help me with a problem, sometimes I want to start TomTom2 with no GPS, just to do a quick route for someone, but when I start it, it locks up (presumably cause it cant find Bluetooth), I cant go into the GPS app to turn GPS off with the tick. The only way I can do it is turn on the Fortuna, THEN untick in the GPS app - very messy. Is there anyway to start TomTom without GPS/Bluetooth active?
I have installed Tom Tom 3 software on my XDA 2 and it "freezes" during navigation for no apparent reason. It also crashes the nav software when the phone has an incoming call. Have spoken to both 02 and Tom Tom who both blame each other (no change there then) have updated software from both and completley cleared software with a hard reboot and re-installed Tom Tom to no avail.
Any ideas???
Which type of gps are you using, what are your gps settings, are you using bluetooth tools, are you using the latest gps driver from www.tomtom.com, does it crash only on incoming call. :?:
Are you using the Traffic plug-in? that's really buggy and works poorly - used to crash mine regularly (xda II w/ bluetooth)
I am now using for 4 days the 1.72 ROM (incl the essential Extended Rom stuff). I bonded my BT GPS, it configured automatically COM5.
Since then I occasionally have freezes in the TomTom navigator (TTN & TTGPS 3.03): Navigation screen seems to 'hang'. I am able to tap the screen though and exit TomTom the official way. When I restart TTN it works again until the next unpredictable freeze.
No direct link to the Phone application.
Beforehand I used the 1.72 ROM with some 1.60.36 T-Mobile customizations (incl. some bluetooth stuf in OEM_WWE_03120301.sa.CAB ). At first this gave some trouble, but after fiddling around (install Pocket Bluetools & de-installed it) I managed to connect my BT GPS using 'Bluetooth GPS' in TomTom3 and it all worked like a charm. Only setback was that I could not approach my Bt GPS via a COM port. (And I want that to occasionally enable/disable WAAS/EGNOS)
Any clues???
Hi I have an O2 XDA2i. while navigating with tomtom, if a call comes in and I answer it I cannot hear anyone, not sure if they can hear me either. I am using a Bluetooth GPS. Does anybody have a fix for this? or am I alone in this problem ? Also, even if I close tomtom down I cannot get hear anything while making a call...only option is to reset the phone.
...grrrrr.......
on a side note..... Does anyone have an XDA2i that has a blutooth car kit that works without echos?
Cheers,
Gary.
Installing the Tom Tom GPS 3.07 update reslved a lot of the problems I have using Tom Tom BT and a BT headset.
Install it after everything else and remove SD card before install.
still locks up every now and again but its about as good as I can get it to work.
Tom Tom don;t seem to give a damn about this problem.
There's nothing like a satisfied customer and I'm nothing like a satisfied customer
@princegary
please check this link:
http://www.tomtom.com/support/right...n/uk.cfg/php/enduser/std_adp.php?p_faqid=1719
as tomtom declares:
...Therefore this update can also be used if you have:
an HP63xx Pocket PC (+ Bluetooth GPS)
MDA2/XDA2/QTEK2020
so it is not really for xda2i, but you'll see... (I don't see a reason for not working with it)
@ Fritz
Fritz said:
Installing the Tom Tom GPS 3.07 update reslved a lot of the problems I have using Tom Tom BT and a BT headset.
Click to expand...
Click to collapse
I do not know, that you only mistyped or really used TomTom GPS 3.07 INSTEAD OF TomTom Navigator 3.07, but if so - give it another try...
Maybe it helps to be satisfied! 8)
I tried the full 3.07 update and same problem still existsed.
I've now installed the 5.0 upgrade and this does seem to have resolved the problem.
All is not perfect as Tom Tom has stopped running twice for no apparent reason but all I need do is restart the application. I think it might be more to do with it loosing the GPS BT signal rather than a problem with the software compatibility. Only two days in so I'll let you all know how I get on through the week.
the only problem I had with tt3.07 on my xdaII, that sometimes it loaded so slowly, I started it more than once - after a soft reset, the problem's gone
but never stopped during/because of a call (neither destinator 3.075 did so far)
so, maybe just your device...
I upgraded to wm2005g and tt5 and having no problem at all (so far :wink: )
As I mentioned TTN5 seems much better, much more stable.
Would love to upgrade to WM2005 but as I understand it it doesn't work on the XDA2i only the XDA2 and the XDA2s.
HI there,
Does TOMTOM 5 work fine on XDA IIi? I have just read another forum here, that TOMTOM 5 is not compatible with the XDA IIi
I am about to upgrade and get the XDA IIi, i would appreciate if you could let me know.
thanks
nya
I upgraded across the weekend and so far Tom Tom Nav 5 has worked pretty well on the XDA2i.
As mentioned it has given up on me twice but I don't think this is due to incompatibility
thanks for the quick reply, just one more question please what GPS receiver are you using?
thanks in advance
Regards
nya
It's unbadged, bought it off of e-bay, please see link below
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5771460756&rd=1&sspagename=STRK:MEWN:IT&rd=1
I installed TomTom 5 and the problem is solved! Call came in and I thought Damn... but I picked up the call and it was fine TomTom even resumed after the call which I was amazed at.
My only problem now is that I got a new 1gb card and tomtom hates it, or atleast my XDA2i does. Would it be better for me to just buy a 512mb for my sat nav apps? or is there a recommended brand of 1/2gb card that works happily on the XDA2i and TOMTOM 5?
Hi all,
Anyone using BT GPS?
If so, which one, how do you find it, and what software are you running.
Thanks Guys..
Ratzz,
I use a holux unit, coupled with Garmin Que and GPS Proxy. It only works well wih the tytn rom. I tried it with the DOPOD rom but it keeps freezing the screen.
Another note, Using the tytn rom has eliminated my alignment issues with regards to the screen.
regards
TomTom 6 & a Fortuna GPSlim.
Takes a little while to sort itself out when TomTom starts, but seems fine after a couple of minutes.
I cant use Tom Tom cause of the malaysian Map not being available
I'm using Holux GPSlim 236 with Destinator 6 when on the road and OziExplorer when roaming in nature.
yes I do
Using a Xloc and tomtom 6
Work great
Holux GPSlim 236 with Tomtom 5 (I am about to upgrade) and PTGmap for topo maps in Garmin format.
Using Destinator 6 (yep, I work in Destinator) with a large variety of BT GPS: GNS, Royaltek, Globalsat, Emtec and some others.
Do not forget that after you pair a GPS using MS BT manager, you also need to enable an outgoing portfor this connection.
I'm using Tom Tom 6 with Hamlet gps BT and it's ok!!!
ratzz said:
Hi all,
Anyone using BT GPS?
If so, which one, how do you find it, and what software are you running.
Thanks Guys..
Click to expand...
Click to collapse
I am using Iguidance with the Globsat 338 Its ok, the only problem is that if a call comes through, you have to restart the program.
Which one is the fastest and smallest SirfIII-based BT GPS unit you would suggest for TomTom?
Fortuna Clip-on for me, used with iGo on my m3100, although I have also used it with tomtom on previous pda's. Will upgrade tomtom and put that on a memory card shortly.
I'm using a Navilock BT338 GPS Mouse (SIRF3), which works perfectly together with my MDA3,MDApro and MDA Vario2 as well! I'm using it with TT5.21 for more than a year, and will upgrade to TT6 (just tested, works fine too!) soon.
The navilock keeps contact to satellites which are not seen/found by several others, can even be kept in your pocket and works without problems behind thermo-windows in cars! It is very small and is working over a whole day without loading, standby more than a week, and ist very easy to set up (connect to COM4).