Hi all,
I have a XDA 2 which works almost perfectly, the gprs settings connect me to the internet and ms messener. I have a small piece of vpn softwate that allows me to connect to my work network and use the intranet there using netfront/pie. I have an IM application that resorts to using the default network option (i think) when the application is started it disconnect gprs and my work vpn and then attempts to connect using the MMS O2 gprs setting and no amount of fiddling with the xda 2 can fix this, my IM app does not have a select adapter option.
Does anyone know where this is stored so that it can be deleted completely? I have found the settings in mms composer but I am unable to delete it?
It does nto show up in the standard network settings either.
Any help would be much appreciated
Thanks andi
Related
I'm using an XDA2 with the latest public ROM version from O2.
I have three GPRS connections that I use - the Internet, a work VPN, and WAP.
For day to day work I tend to use just the Internet and work VPN. Sometimes, however, I also use WAP.
Is there an easy way of connecting to WAP WITHOUT having to go into the connection manager and change my Internet settings from the Internet connection to the WAP connection?
Or, is there a better Connection Manager out there that can handle more than 2 connections?
Or, finally, is there a way to detect that a WAP connection is needed, and connect as required?
An alternative would be a program that allows you to, with the click of a button, select the two connections that you want to use (i.e. profile 1 is VPN and WAP and profile 2 is VPN and Internet).
Thanks!
I have exactly the same problem.
Too many operations to change the connection!!!
Someone any ideas?
Same here .. Having the same issue ..
It is inefficient to change the connection through Conn Manager ..
Perhaps can we do it through registry change? i.e. create several registry files, and just click the one we need when we want to connect to certain profile ..
Tried to look through the registry setting for Conn Manager, but it is confusing, they are using so many {436EF144- ....}, {18AD9FBD- ..} thingy
Maybe some expert can help here?
Thanks
Back From The Grave!!!
I was wondering the same thing!
I hate to say it, but the iPhone does wifi much simpler than Windows Mobile -- just flick a software switch and you're on, no changing settings, and no changing back when you go offline.
It's over 10 taps in Windows Mobile to do the same thing! I know there just HAS to be a simpler way to do this!
you can make you life a easier if you create a shortcut of the remnet.exe (inside the windows directory) to the start menu folder
rename "shortcut to remnet" to "connections"
Hello,
i've been searching around the web for a definitive explanation of the communication settings (Wep, Wap, GPRS, Internet, ISP, Wlan, etc.) in WM2006.
I can usually fiddle my way through setting something up, that seems to work...but i never know exactly why or what i did!
Now that i've got the HTC tytnII with built in Wlan this has become even more complicated.
For example, sometimes when i have an active Wlan connection and am surfing the internet, the phone connection pops up and asks me to connect via GPRS (Wap or Wep).
This is something that i've been confused about for some time anyway: how doese the unit know which way it should connect to the internet when i start an application?
IN any case, i've now been searching for a definitive explanation of the various settings contained in WM6.
Is there somewhere a good explanation of how it all works, so that i can understand the various settings?
Thanks in advance for any help....
tjohnso1 said:
Hello,
i've been searching around the web for a definitive explanation of the communication settings (Wep, Wap, GPRS, Internet, ISP, Wlan, etc.) in WM2006.
Click to expand...
Click to collapse
Same here, I'd also like to know the difference.
For example, right now I seem to be able to configure a specific network connection to use for my Gmail synchronization. However, this ranges from 'The Internet' to 'My Internet', and just don't forget 'Work'.
Having a more profound understanding of these 'networks' and how to properly configure them is vital in this day where devices can also connect to the net using USB/ActiveSync and Wifi.
Any of you that had the XDA IIs - I liked the feature of being able to initiate a gprs connection by tapping on the antenna and then choosing the connection from the presented list.
This doesn't seem to the be case on the Exec - anyone know how to set this up or any 3rd party software that allows you to choose?
I'm interested in using the O2 Active wap settings for the wap pages and mobile internet for other uses.
Anyone got any ideas?
Ta
Darren
Anybody know some application that can configure proxy (use ou not) in each connection?
I use proxy for GSM data connection to work remotly (work network), but when connect by WiFi or GPRS I don't use proxy and have to enter configuration connections to disable...
Can I assign proxy settings to each connection?
Thanks
i had the same problem as well, do a search for proxy and you'll find it, also go to start>help and search proxy and it will tell you there.
fone_fanatic said:
i had the same problem as well, do a search for proxy and you'll find it, also go to start>help and search proxy and it will tell you there.
Click to expand...
Click to collapse
But, do you know any software that can do it???
I know configure proxy any time but i want an app that can do it for me (in each connection)!
Thanks
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Beeble said:
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Click to expand...
Click to collapse
Hello,
But at WiFi connection I can't, because there is not any modem config.!
Anyone?
Thanks
arp said:
Beeble said:
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Click to expand...
Click to collapse
Hello,
But at WiFi connection I can't, because there is not any modem config.!
Anyone?
Thanks
Click to expand...
Click to collapse
Settings, connections, connections, advanced, select network, NEW "make profile for WIFI use eg wifi"
Settings, connections, network cards, select AP, "connects to" wifi
steeings, connections, connections, tasks - edit porxy for "wifi"
Hope it helps
Ok, this thread is a little old, but it is close to what I am looking at.
I just got my bill from O2 and I have been charged £1.50 for "GPRS data" although I think it is actually MMS messages being sent or received by GPRS. I am guessing this is because it is set up incorrectly by me.
I did have it set to collect MMS over the "mobile.o2.co.uk" settings (as opposed to the "wap.o2.co.uk" settings) and wifi could be enabled, but if I tried to use the browser without enabling wifi it automatically dialled the GPRS connection.
Could someone give me an idea on how to set it so that
A) MMS messages only count as MMS messages and are sent and received by GPRS.
B) WiFi is the preferred connection for everything else.
C) GPRS is available if WiFi is not available (and preferably after getting confirmation from the user), ie I dont have to find the settings and re-enter them.
I realise this is probably not possible, but any help and/or pointers are appreciated.
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
egg said:
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
Click to expand...
Click to collapse
maybe i'm to simple, but i only use Internet settings and don't use @work @all.
And it works fine everywhere, @home, @work, via GPRS and via WiFi. Have you tried this?
and why would you put your gprs setting under Work?
Extremely sorry no one has replied to your post with a solution yet, I maybe too late but I only joined this forum yesterday.
You want multiple Network settings with independent Proxy settings and IP, DNS etc right??
Go to Start>Settings>Connections>Tap connections >go to the "Advanced" Tab. Tap "Select Networks" Here you are given 2 Choices of Network settings you can use. Work Network and Internet (or ISP). You have your work settings saved on Work network so do not edit that. choose the other one and edit it to enter all your GPRS settings. and save as your gprs connection. Now if you want to add a third independent setting, from the select Networks tab, click on new and you can create a third Set of connection settings (for your home maybe). Your PPC can handle 2 simultaneous connection settings perfectly, ex. 1 for Pass through and 2 for GPRS. But each time you want to connect to a third or different setting, you just go to the "Advanced Tab"> select Networks> tap the pull down options menu and select the other connection set that you would like to use et voila it is that simple.
I just installed BlackBerry Connect v4.0.0.104 on my Raphael and it works great. I am recieving my mails and can browse the net through the Internet Explorer but all other applications which require internet access such as Opera, Weather, IMs, etc. have stopped working.
I went to Settings -> Connection -> Connections and it was empty even though my phone showed it was connect to EDGE (small E on top of the signal bars). I then created a new connection with my carrier's APN settings and connected it. I was then able to use all the other applications but the blackberry service got suspended.
From what I understand the BlackBerry Connect application connects directly to the blackberry server without creating a dialer in Settings -> Connection -> Connections so even though its already connected the non-blackberry applications think there is no connection.
Secondly if I create a new connection it disconnects the blackberry connection.
I want to know if anyone has figured out a solution for this. Is there a way to create a proxy to link to the blackberry service or something?
Thanks in advance.
surfturtle said:
I just installed BlackBerry Connect v4.0.0.104 on my Raphael and it works great. I am recieving my mails and can browse the net through the Internet Explorer but all other applications which require internet access such as Opera, Weather, IMs, etc. have stopped working.
I went to Settings -> Connection -> Connections and it was empty even though my phone showed it was connect to EDGE (small E on top of the signal bars). I then created a new connection with my carrier's APN settings and connected it. I was then able to use all the other applications but the blackberry service got suspended.
From what I understand the BlackBerry Connect application connects directly to the blackberry server without creating a dialer in Settings -> Connection -> Connections so even though its already connected the non-blackberry applications think there is no connection.
Secondly if I create a new connection it disconnects the blackberry connection.
I want to know if anyone has figured out a solution for this. Is there a way to create a proxy to link to the blackberry service or something?
Thanks in advance.
Click to expand...
Click to collapse
You should be able to enable multiple simultaneous APN connections. I have done this on my Kaiser and use BlackBerry Connect. I must admit though I have never been able to use IE over the BBC APN connection when using the 'BlackBerry Browser'. I assumed this just set some Proxy settings?
http://forum.xda-developers.com/showthread.php?t=318571
Search for OperatorContexts.
Andy
Thanks but 3G is not available in my country, i'm stuck with GPRS and EDGE.
surfturtle said:
Thanks but 3G is not available in my country, i'm stuck with GPRS and EDGE.
Click to expand...
Click to collapse
I apologize for being so hasty. I tried your suggestion and it works even without 3G. Thanks.
I thought that simultaneous connections were not possible with just EDGE but I was wrong.
absahnen said:
Go to:
HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContex
There you will find several numbers. E.g. 26202 for Vodafone in Germany.
The number is a combination of MCC / MNC so 262 02. You might find you operator in this list:
http://surfio.de/info/mcc_mnc/mcc_mnc_liste_6.html
What happens is if your operator is not in this list there will be a key created with no contend. I inserted in there by copying from one of the others:
GPRSContextNumber = 3
UMTSContextNumber = 3
This is the source for the value of NetworkContexts in:
HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\
Just set the Contexts value to 3 and delete the NetworkContexts entry. It will be created from the source above with the value 3.
I am so happy that I finally found that out. That was such a pain for a long time. Hope that helps some others as well.
Thanks to luiggi who gave me the final hint in his thread:
http://forum.xda-developers.com/showthread.php?t=318571
Search patterns: Multiple APN connect Multi APN More than one Internet connection
Click to expand...
Click to collapse