Related
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?
anybody. ..
i think his bootloader is dead .. and i was reading about that but i don know how to make JTAG??
did you look at this thread..?
keyx said:
did you look at this thread..?
Click to expand...
Click to collapse
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)
yoske said:
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)
Click to expand...
Click to collapse
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.
blabol said:
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.
Click to expand...
Click to collapse
and there is a problem .. i can't get to sdloader because my bootloader (bootloader is all combination of keys etc sdloader, download qualcomm...) is screw up. . and that mean i cant start sd loader, cant start download qualcomm and cant start anything.. only when i put ipaq on charger he show orange LED. . and thats is all.. i was reading about the same problem on HTC Atom, he solved on the way that he is done a JTAG..
if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty
EREZYAD said:
if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty
Click to expand...
Click to collapse
yes i'm sure that doesn't show a blue hp screen, and i take off micro sd from device and same problem, i use original battery but i must say that i was upgrading a bios from another phone (my biggest mistake, i am a stupid guy who dont read before use ) and everything is start ok but on half progress my screen goes to black. . and from that i can only charge my phone and he shows a orange LED but i cant start him. . .cant start anything..
you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before
keyx said:
you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before
Click to expand...
Click to collapse
i know but there is JTAG ( http://www.gert-menke.de/jtag-howto/ ) the problem is that i don't know where are testpoints (TDI, TMS..) i need service manual. . does somebody have them?
yoske said:
i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?
Click to expand...
Click to collapse
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk
dirlan2001 said:
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk
Click to expand...
Click to collapse
yes they are the same phones, but they havn't same ''product ID'' in my case FB136AA#ABB and i use this http://h20000.www2.hp.com/bizsuppor...swLang=13&mode=2&taskId=135&swItem=hh-59337-1
HP service in this case excange the all mainboard and put a new one who cost 200€, and that was a really expansive. but real problem is flash memory on the mainboard, in process that i done flash memory is flashed with a wrong BIOS, and it has a 2 options how to do it back:
1. excange a flash memory (but in this case replace all mainboard)
2. jtag: (they re-programing flash and make a new bootloader, and after that i can again flash a roms.)
see this http://wiki.xda-developers.com/index.php?pagename=DeadBoot
p.s. can anybody know where i make a new thread. . where is the technical part on this forum ???
Anyone interesting??
Now I have a JTAG cable, but still can't find service manuals, so i think the mainboard are similar with another HTC devices ..
If you need a photo of it,I'll take a photo..
after few months i came again . one question . .is there solution for 614c who haven't bootloader, in last post i wrote that i made jtag cable. . after that i cant go on because dont have service manual . does anybody have service book?
I'm trying to find a solution
while connected to your phone and set up a jtag
prepared eboot.bin
need to learn from eboot.bin
address at which he wrote in RAM
and run
but so far I do not know the address
I have the same problem about bootloader and what can i do? please help
did anyone managed to find out the address for JTAG?
@ Licov_a can you post a picture from Russian forum in which the motherboard, because there are explained where the pins, and repair procedures.
http://pda2u.ru/topic1699s0.html?p=30792&#entry30792
Someone told me start address for jtag pls
vaxoo said:
Someone told me start address for jtag pls
Click to expand...
Click to collapse
licov_a told me that he awaits the address and will have it for 2 weeks, so please be patient as it will set the whole process that is rather
5c000000xldr
a0140000eboot
I get this ROM from my seller overseas He told me that this ROM is WM6.5 and works with T3232 and T3238 and on T4242 too:
Instructions:
1. You can flash and update your phones to english with this ROM:
ROM English WM 6.5 T3232 / T3238:
http://www.imprinthk.com/T3238+/T3238_WM6.5_EN.zip
ROM English WM 6.5 t4242:
http://www.imprinthk.com/T4242/T4242_WM6.5_Eng.zip
2. Download the file, and unzip it.
3. Before begin the process make a backup of your information and format your micro SD with a format of FAT16, you can use this program to do this http://www.cnetx.com/format/
4. Copy the file SMART.UPR to the Micro SD.
5. Turn off the phone.
6. With your phone turned off press in this orden this combination: send button (green button)+enter button (central button)+power on button. Keep it press until a white screen appears, this screen is "Update Mode".
7. The update process will begin, wait until the process is finished.
8. It's all ready you can enjoy your new ROM with WM6.5 and touchflo
NOTE1: I wait for your commments and experiences updating your phones T3232 y T3238.
NOTE2: I'm not responsable for any damage in your phones cause for this process. The update process it's on your own responsability.
Nope, the button combo for "update mode" doesn't work on the T3232.
I tested the english rom wm6.5 on my t4242 and now, my wheel doesent work and i dont know what i can do, that it works again.
downgraded back to 6.1 doesnt show effect, now my wheel doesent work and i have the same wm like before -.-
Your ROM link is down!?!
ROM English WM 6.5 T3232 / T3238. on T3238+ g-sensor not work ''Motion Sensor'' . ROM English WM 6.5 t4242 on t3238+ tested, now my wheel( button)doesent work correckt, ''Motion Sensor'' work correckt - help!
Download link is down
Hi!
Unfortunately the download link is down. Could somebody please post a working link? Or, if it is not possible, send the files by e-mail?
Thanks a lot!
http://www.imprinthk.com/download/T3238/T3238_WM6.5_EN.zip
http://www.imprinthk.com/download/T4242+/T4242+_WM6.5_EN.zip
Bluetooth problem
with this ROM I have Bluetooth problem on T3238, data sending but not receiving. T3238 visible for other phone and wiriting about error.
Somebody know solution?
Start-Settings-Connections-Beam. There is "Receive all incoming beams".
New English Rom(UPR)WM 6.5 (build23088)
http://rapidshare.com/files/333098661/T3238_WM_6.5_23088_.rar.html
When i exec the update procedure, pressing the buttons, one white screen saying "Calibrating..." is show, and the indicator led is pink. Above many seconds, the cel turn off and when i turn this on, the system not updated.
Help-me please....
piubello said:
When i exec the update procedure, pressing the buttons, one white screen saying "Calibrating..." is show, and the indicator led is pink. Above many seconds, the cel turn off and when i turn this on, the system not updated.
Help-me please....
Click to expand...
Click to collapse
Exact same problem please help
The New T3238 HTC/HTY/Dopod/Whatever
I have the same problem - calibrating screen
But I think our problem its a bit more complicated:
I got a T3238 yesterday. Look this device information:
Version:
ROM Version: 01.002.2 P638M30 EN
ROM Date: 11/30/2009
Radio Version: 1.07.9324
Protocol Ver... DV3.0
Hardware:
CPU: MarvellPXA310
Speed: 624Mhz
RAM Size: 192Mb
Flash Size: 256Mb
...
Identify:
Model No. V3
...
I was accessing 999ppc.com looking for information about the Rom P638 and this Rom is related to Huawei K3 processor.
In the box is a Qualcomm, the device says it is a Marvel, but is a Huawei?
I also found a wm6.5 Rom, but in chinese.
Will another wm6.5 WWE/EN Rom work in my cellphone ? I was trying to use Jade23071wwe but it cannot retrieve the actual rom version.
How can I flash it ? I also didnt find a hard-spl to work...
Help pls!!!!
Update mode for HTC/HTY 3238 phone - FOUND
I found the update mode in my 3238:
Hold power + volume down + send button (green button).
But not sure to upgrade to WM6.5 because bios information above.... Anyone have tried ?
I have wm 6.5 on my T3238
(build23088) - no outgoing calls
(build21222) (in first post) - no problems
You updated using a smart.upr file or a .bin file ?
I tried a upr, but my cellphone does not recognize.
My Bios is a P638M30 EN, so i suppose my processor is a K3 not Marvell.
I found a rom for this bios at 999ppc and DBank (chinese forum) thanks to Google Translate - but the wm6.5 is in chinese ....
This is the filename: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin
I think a .bin file will work, but I'm afraid to test this chinese rom in my T3238 clone.
my cellphone does not recognize to.....
the name of file is to long.......
i changet name of file on "SMART.upr" and it work
it must work
spooky29 said:
Nope, the button combo for "update mode" doesn't work on the T3232.
Click to expand...
Click to collapse
neither on my t3238
How can I install a language pack? WM have some kind of mui file? I need one with portuguese language.
chz said:
New English Rom(UPR)WM 6.5 (build23088)
hxxp://rapidshare.com/files/333098661/T3238_WM_6.5_23088_.rar.html
Click to expand...
Click to collapse
File isn't available anymore
hello my phone Kaiomy Aegis 1288 (3G HTC Touch clone) started to become slow and after a soft reset only started to introduce the first and second splash screen and the second screen.
I also can no longer be located by SmartSync. :-\
Searching in xda forum found that it allows a disaster recovery of keys by pressing power + up + down volume, ai this point it looks for a file called k3img.bin the sd card should be formatted as fat 16.
when I turn the phone by pressing the keys mentioned above it finds the file has more than one error in step 4 is invalid while updating image: version check error :'(
I tried different images, most have the same message.
I need help to solve this problem already and I thank everyone who help me thanks
Today I tried to use the IDT to install a new rom.
Unfortunately, the IDT did not detect my phone.
Is there a way to remove the lock version check, so you can put a new rom from the sd card, without showing the error version check error?
I tried contacting the Kaiomy support, but I had no answer.
I do not know if I'm using it wrong the IDT.
I also tried the first aid, but the download button is not activated.
thanks for help
Help with Kaiomy Aegis 1226
Hi, im new in forum... i recently bought one Kaiomy Aegis 1226 in PY...
I liked the phone, but it come with rom in ESN Spanish, and I need PT-BR language.. I Asked for help, in other forum, but no answer.
Anyone can help me ROM PT-BR and version that I can Use in this phone?
Ps. This phone work with 2 SIM cards.
Waiting for help! thanks and sorry for bad english!
Msn for contact...
[email protected]
I'am new to xda forum, and I try to search and explore for a match problem but unfortunatelly I can't find . so correct me if I'am wrong
I get an 2nd ipaq rw6828 with left softkey problem. On daily usage, it wasn't a big deal for me. But when it comes to rom upgrading, it was.
On all rom upgrading tutorial, it's all use left soft key to enter bootloader, both on upgrading via SD card or via PC.
I've cleaned the keyboard path n flexy cable. It's definitelly not "dirty keypad" problem.
It was important for me to upgrade to wm6
So, if you all have a tutorial for rom upgrading without left softkey, point it to me.
Many thanks
PS : sory for my bad english
bump
no one here (