when i turn on xdaII bluetooth, and turn off the chameleon(by pressing both button for 2 sec), i realised that i still can answer phone from my chameleon... ??? any one have the same experience?
i realised that it can't make any call if i use it with xdaII rite?
Are you sure you didn't turn it ON when pressing the two buttons for a couple seconds?
Yeah, the Voice Activation doesn't work with Bluetooth Headsets on the XDA II (yet). Hopefully someday there'll be some software to make that work.
Related
Hi,
How exactly is this thing supposed to work? im talking about the button on the stereo headset that comes in the box.
There seems to be no logic to me answering a call, i have to press it repeatedly to answer, pressing once or twice or even holding it in doesnt seem to answer. So far the magic number is 4 quick presses and bing it answers.
It does nothing at all if i press the button to make a call, I expected it to wait for a voice command if I do this?
Weirdly once IN a call if i press it, it will put the call on hold and another press takes it out of hold, probably as designed and suggesting the button isnt broken.
This is my second JJ too. :?
I just dont get it :roll: Roll on the Samsung SBH-100 Bluetooth headset!
Cya
Stot
I remember in my old Nokia (or maybe Motorola or Ericsson) days, I could have my handset answer automatically within 1 ring if it was plugged in to the hands-free kit. I'd like something similar with the Universal so that when it's in landscape mode as a bedwarfed* laptop, it answers on speakerphone on any keypress, otherwise it behaves normally. I guess I'd better look into the telephony APIs...
Hi,
does anyone know how is it possible to disable the LAST NUMBER REDIAL function? If my BT headset is in my pocket it happens many times, that the "-" button is pressed and it activates the LAST NUMBER REDIAL. It is very annoying....you can imagine. Is there any REGISTRY hack or somehing like that to solve this problem?
THX
That has to be one of the most annoying things!
Especially when you are having a moan about someone after the original call!!
Vijay??
Nobody has the same problem?
me too - it happens for me because I changed the LaunchAPEnable registry setting from 1 to 0 to send the sound to my headset over BT
WOlfgang
Can you clarify this problem? Which button is it that's being pressed? Hardware key or on the headset?
Explain clearly and I'll look into it and if I can help...
V
Vijay, you're too kind for your own good.. heh heh. (but we all appreciate it )
I had this problem with my BT headset and speaking for myself, it's when you hold down the button on the headset, you'll initiate last number redial.
If you just press the button you'll launch Voice Dialler..
I used to keep my BT headset in my pocket and I had both these issues.. eventually I resolved both of these problems by buying a £3 neck strap off ebay and wearing the headset round my neck.. :wink:
cheers,
gaspx
--
BT on for nearly 2 weeks!!
gaspx: there is a technique I'm working on which might help us out here.
It's messy and very very early stages right now, and sent me over the edge last weekend. But if the technique works, it'll open some very interesting doors. Please remind me in a few days. I'm afraid that I can't think of a quick solution, but in my usual style, an unnecessarily complicated solution might surface...
V
i have had the same problems aswell...
although i have been looking into the phone tools that only turn the bluetooth on when you have a phone call,
i am wondering if that will allouw bluetooth to turn on when transfering audio
VJVolubilis will automatically enable bluetooth and transfer audio (or attempt to).
V
Anyone figure out a way to do this yet? It sucks because I keep accidentally calling people from my headset.
I've looked around for a solution to this problem for a while now. Anyone come up with something? Vijay?
Any development on this issue yet? I accidently called twice today. Very annoying because I kept my BT headset in pant's pocket. Please help, Vjay and others professors.
How about powering down the headset? Maybe I don't get it but....
I just triple-checked, my Motorola H500, H820 & H700 will reconnect when I power them back up & press the button once as long as the phone's BT is on, even mid-call. Do these newfangled machines not offer that? What I do is answer the call on the unit w/ one ear and if I think it'll be more than a minute, I put the headset on the other ear to power it up, press to connect, and I don't miss a word (not on the H820, I'll take a pause to switch to that one when I pull it out of my gadget-laden diaper bag. Every mom needs a BT headset!). I think it'll hook up even during ringing, but calling from my skype seemed a little overkill for this response.
(I'm using a modified/very-simply-reduced version of the Jaguar ROM on a wizard at the moment, and many of Vijay's venerably ingenious tools.)
Hi,
I have a couple of questions:
1) I have a default corporate install 02 Exec and a Motorola BT H3 headset.
When the devices are all paired up, I can receive incoming calls no problem. But when I try and initiate a call from the headset by tapping it, I sometimes get a responding beep from the voice dialling software, other times not. When I don't get an audio response, the device just doesn't seem to even notice and nothing changs on the screen.
I have tried all the usual, re-pairing, reboots etc, but no luck.
I also can't pin down exactly when it does it. Sometimes I can start a call when the device is in 'standby' ie if I haven't used it for a while, other times not.
My next step is to find someones phone and test it with that and see if it is the headset or the exec.
2) My backlight does not come on when I tap the screen or a key despite having ticked the correct setting to enable this. Each time I have to press the power button.
Has anyone else had similar problems?
thanks,
/Mad
Ok,
have now done a complete hard reset and a new corporate install and the BT headset is stll not working 100% of the time.
I have tested it on another phone and it works a treat there, so it is not the headset.
thanks,
/Mad
Scrap the below info. This only works if the Exec has been off for a short time. Anything longer than a couple of minutes and it doesn't switch on with a tap.
I have O2 swapping it out over the next couple of days. Let's see if these issues are widespread. but judging by the responses to my pst, I take it I am the only one having trouble?
/Mad
Ok,
With problem 2) I have found that if I do a hard reset and install as O2 rather than corporate, when I open up the device in clamshell mode the backlight comes on and if it is already open, a tap on the screen or key does switch on the backlight.
So, this particular 'issue' appears to be related to the type of install. That is it works in O2 but not in corporate mode.
Still no joy with the intermittant BT headset voice dialling.
Either way, I have O2 swapping it out over the next couple of days. Let's see if these issues are widespread
/Mad
Last night I updated to the most recent O2 ROM (as per their website) and now...
it appears that the first time I press the BT headset button, nothing happens, but then on the second press it brings up the voice dial software.
I have had a damn good trawl through all the other posts about voice dialling and it seems that the first press connects the headset to the exec and the next button starts the app.
Is this correct? Anyone else had similar problems?
thanks for your time.
/Mad
I had similar behaviour when I used my SonyEricsson HBH65 headset with my Exec. When I bought a Jabra BT800 suddenly my Bluetooth experience was transformed, and the combination works perfectly.
I think the latest models of headset work much better with the Exec than those a year or two old.
Maybe this helps. Hope so.
Thanks for your reply.
I took my BT headset back to the shop today and got them to try a jabra (don't know which version) it still wasn't bringing up the voice dial software every press.
Spoke to O2 support today and they admitted that BT is flakey on the Exec and that it is a known fault with HTC.
Oh well, at least it isn't just me!
/Mad
Has anyone any idea on how I can adjust the time required to hold the headset connect button in order to activate the voice command? Currently I need to hold this for far to long in order to activate it.
Maybe there's something in the manual, but I can't even anwer calls with that button. I think it's supposed to be short press to answer calls, and long press for voice command. Still not figured it out.
That's odd, I press the button for a brief moment , and voice-command is activated.....BT headset btw, but it works like a charm...
The handsfree wired headset that came with the Dopod is the one that takes quite a few seconds of holding to respond. I imagine that a bluetooth headset would work differentially as the time is probably controlled by the device itself rather than the HTC 3600.
Hi All!
I have a problem with HD: I can not start voice dialing by the BT headset (with Polaris worked well), but only to repeat the last call pressing 2 time the button. The headset is a Htc m200 (it supports this feature). Somebody help me solve? TNX!
Mine works fine using MSVC. I I use a cheap bluetooth headset I got from AT&T and in the car it works using my JVC car radio.
you need to hold the call button a little longer than normal and it works. Just dont press and release. hold it and you will hear a blip and make your call.
dandun said:
you need to hold the call button a little longer than normal and it works. Just dont press and release. hold it and you will hear a blip and make your call.
Click to expand...
Click to collapse
Doesn't work this way...by holding just a little bit longer nothing happens, if i hold for more then 3 seconds the headset turn off!