Has anybody experience if HP Mobile Printing works on the O2 XDA II ?
OK found some answers but it seems that it works on HP Ipaqs only...?
Thanks,
Gear
it does work on the xda2, u have to do a manule install by copying the cab and instaling from the xda2,
as for the program it works fine i use it with a number of lan attached hp printers
Thanks Henny. Will try the manual install and inform back on the situation.
The Activesync install though did not work.
Gear
I did the ActiveSync install and it works perfectly for me. I print via IR to my HP LJ 2100 quite often.
RE
Hi guys!
I need help in getting O22 to print using HP Mobile Printing v2.0. My ROM ver is 1.60.00WWE
I've tried doing a manual installation as mentioned but it still couldn't work. There's some kind of error message saying could not find print centre.
The following files were extracted:-
a) hpMobilePrinting.PPC_ARM
b) hpMobilePrinting.PPC_ARM4
c) mPrint.arm
Questions
1) Whats the difference between a) and b)? Which to install?
2) Do I need to install mPrint.arm?
3) Is there any order for the manual installation?
4) Did successful printing uses IR or BT?
Any help would be greatly appreciated. Thanks
Hi,
Ive got 5 CAB files which all go together to run a little program i have written, however, when installing them on my XDA IIS every one of them displays the message 'The program you installed may not display properly because it was designed for a previous version of windows Mobile software'. I think these errors may become a problem when i place it in the Extended Rom folder.
the files are as follows
- OpenNETCF.PPC3.ARM
- MyProgram_PPC.ARM.CAB
- sql.ppc3.arm.CAB
- sqlce.dev.ppc3.arm.CAB
- sqlce.ppc3.arm.CAB
Any suggestions would be great!
Thanks,
James
Hi LinQ
The problem is that the OpenNETCF and SQL CAB files were built for WM2003 and _NOT_ WM2003SE. This means that WM2003SE cannot verify that they will work correctly with features such as the screen rotation facility.
To stop your app from coming up with the same message, you need to download the WM2003SE SDK from MS (haven't got a link sorry... but google for it and you should find it) and then target your application at the new WM2003SE device option that you get.
Hope that helps
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Can anyone help? Please?!?
Same here... and i'm going mad. Seems this issue affects random cabs. I succesfully installed your same TomTom version, but I can't install G-sensor Calibrate, or even TotalCommander...
I tried to update to Project V3.3 but issue is still there with the same cabs.
Any ideas?
I also tried disabling security warning by using Schap's Advanced Config. Nothing changed.
random
as you said it is a random effect... same prb here.... but i saw something odd...
i downloaded a cab with opera installed on htc and selected "open" when it asks what to do with the file... download complete but instalation unsuccessfull.
i've downloaded the same file but saved it on the storage and after that i installed... and surprise it worked! maybe it is a memory prblm.... i don't know!
this method does'nt work with every cab
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
parlato_edoardo said:
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
Click to expand...
Click to collapse
no... just using opera from the diamond
Same problem here... I have some CABs which dont fail and some which fail... Very anoying problem
I confirm i solved my problems by downloading WITHOUT any download manager or download accelerator all cabs on my pc, then check them with 7zip, then copy to my Diamond and install.
It's a bit strange way to get cabs installed but it's a safe method.
You can also choose to use download managers or download with your pda to download cabs, but you have to check them later if they don't install and... re-download them.
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
thedino said:
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
Click to expand...
Click to collapse
I have the same problem when the device - an o2 XDA Diamond - is connected in "Disk Drive" mode.
Whenever I transfer files from a Windows Server 2003 system (w/o Service Pack) to the "Internal Storage" of my Diamond the files become corrupted on the device.
This happens with any file type, but only with larger files - they become corrupted when they are several megabytes in size.
This doesn't happen randomly, it happens every time.
Reading large files from the "Internal Storage" works without problems.
When I transfer the very same files from a Windows XP system then they are OK on the device.
Also when I transfer the files in "Active Sync" mode the files are OK, but the "Active Sync" transfers are randomly aborted and the sync is lost.
I knew I'm not the only one with that problem, but I never found any information.
The ROM is the newest official one, 1.93.207.2.
Of course the Windows Server 2003 system transfers large files to other flash storages - camera, card reader and other Pocket PCs - without any problems.
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Sorry, doesn't work for me, but I thought that it was clear. (Because I wrote all info, like Service Pack, etc.)
buffystar said:
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Click to expand...
Click to collapse
You dont understand this... The file is corrupted while transfering via USB Drive but OK if we use ActiveSync... We know how to install CAB files. there is not problem.
BTW, I have Win2000 so it might be same as mentioned 2003...
I will try on another system and see how it works.
I just installed Windows XP SP3 on my machine: SAME PROBLEM!!
thedino, what mainboard do you have and how old is it and what is its USB version (1.0, 1.1, 2.0)? I have a K7S5A with USB 1.1.
For now I have to assume that HTC produced crap and that I'm gonna send my Diamond back.
I bought an USB card for PCI and there is no problem when connecting the HTC Diamond to this card.
No data corruption at all.
So obviously it must be something with onboard USB chipsets, but it's definitely a problem on HTC's side,
else these onboard USB chipsets wouldn't work correctly with any other USB device.
jameshpg said:
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Click to expand...
Click to collapse
I had the same problem (either "installation unsuccessful" or just gets stuck during installation). I was using changescreen v2.5 for handling the display rotation. Apparently this software has a conflict with the .cab installer. It was enough to disable changescreen, then run the .cab, then re-activate changescreen again.
Hope that this helps.
maTTeo
Temporary Fix
Try this
Rename the cab file with a different extension, eg TotalCommander.cab to TotalCommander.txt. Do this on your computer.
Select the file within Windows Explorer and do the usual "Edit -->Copy" to copy the file.
Establish ActiveSync connection with your Diamond and using "File Management" select the Internal Storage of your Diamond. Then select "Paste" to paste the file into the internal storage of your DIamond. Rename the file back to having the .cab file extension by using the explorer shell you opened through ActiveSync.
Unplug Diamond from the USB and ensure ActiveSync on your Diamond is not active. Using file explorer program on your Diamond tap on the cab to install it.
The only alternative is uninstall all extra apps you have put on one by one and try to install other cabs as some of these may conflict with the cab install OR you can update your ROM from the 1.93 series to the 2 series.
Let me know if this temporary fix works. Best of luck.
Aussie
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
saiweb said:
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Click to expand...
Click to collapse
i'm using the original rom i haven't changed it
deadnex said:
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
Click to expand...
Click to collapse
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Abu Shahad said:
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Click to expand...
Click to collapse
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
deadnex said:
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
Click to expand...
Click to collapse
thanks man worked perfectly
when i press modify it tells me thats theres an error and it closes
please help
Hi,
I created an app that reads a csv file from storage card. This file should be created with excel from a PC and saved to the connected device's storage card with a macro.
My problem is that I can't find which path I sould use from the excel macro to directly save it to the SD.
Can you please help?
Thanks
You can't do it directly. Although Explorer shows your mobile device as being accessible from ‘My Computer’, in reality it is using ActiveSync to get at it. Without ActiveSync installed there is no 'Mobile Device' visible.
From a command line there is no direct method to get to your device, but you can do it indirectly in a two-step process.
Firstly, download and install the Windows Mobile Developer Power Tools - WindowsMobilePowerToys.msi from here
One of the utilities in the above is CECopy. It runs as a command line program using “DEV:” to represent your mobile device. The two steps now become:-
1.) Save your spread sheet to the hard disk as C:\TEST.XLS for example, then use:-
2.) CECOPY C:\TEST.XLS DEV:\Storage Card\TEST.XLS
It should do the trick, I have just tested it on WinMo 6.1 and it works a treat! It goes without saying that ActiveSync must be installed on the PC and the mobile device connected. Good Luck!
Code:
C:\PROGRA~1\WI1C69~1\CECopy>cecopy readme.txt dev:\readme.txt
Connected.
Syncing from <readme.txt> to <dev:\readme.txt>
"readme.txt" Copying (New) ... 2/2 k ok
C:\PROGRA~1\WI1C69~1\CECopy>
It worked fine, thank you