Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Hi everyone,
I havent seen a post about this so i assume its only me that has this!
Since i have been carrying my exec in my pocket in 'clamshell mode' i have noticed that some of the keys on the keyboard have rubbed against the plastic next to the screen causing dot marks. i assumed the rubber pads at the edge of the screen were supposed to prevent this.
Anyone else noticed this? Anyone know how i can get rid of the marks!?
Paul.
I have the saem problem with my QTEK 9000
I have called tech support and they state that it isn't covered by the guarantee. Thats BULLS**T. I don't know who to talk to now to have this problem solved.
I got a Krusell Case and now the transparent part of the case has scratches. The case is 5 days old!!! This is definitely a factory defect in my book.
Who do we complait to about this?
Guys, don't you agree this is a factory defect? Anybody know any of the dealers personally and could inquire about this problem?
I've mentioned this under another post (search for "keyboard bump stops"). Basically, the little curves rubber stops in the bottom corners aren't tall enough to prevent the keyboard rubbing the top of the clamshell.
This is how I've fixed it...
1. Prize out the rubber stops (this is very easy with a jewellers screw driver, or similar)
2. Put a very small amount of Blu-Tac into the recesses, and pack it down with the screwdriver. This is to act as a base for step 3.
3. Using the screwdriver, carefully dab superglue on the blu-tac, and around the lip of the recess.
4. Push the bump stop back into place.
Mine now sit about 2-3mm proud of the surface, and I can see daylight through the closed clamshell, so the keys don't touch the top piece.
Cheers,
Steve.
Does this mean that it isn't a factory defect? And really isn't covered by warranty?
I think it's just a design flaw, really. In theory, I suppose you could insist they do something about it, but I don't know whether you would get anywhere.
Cheers,
Steve.
I recently applied a screen protector on my Qtek 9000 and used a cloth to clean glasses with to clear the screen of any dust. Since then I've put the cloth in between when I closed my Qtek. Both the screen protector & cloth will hopefully prevent any damage to the screen and surrounding area due to the keys touching and rubbing them. :!:
its a shame that, after we have looked after our devices so carefully, they are damaged due to a design fault!
Is there any way of polishing these marks out? i suppose it would be very difficult with the case being a matt finish.
Yeah, this is very disappointing. Does this happen to those who have MDA Pro, Imate, O2 also?
Is there some bureau where we can complain?
My Exec with about 3 weeks of use also shows marks on "-" and "+" keys, and also on "2" and ":", more concerning is when the device is used with screen out as I tend to keep mine now, the rubber stops actually touch nothing at all because of the curved outer case. No marks have appeared on the "o2" alluminium outer yet though, only on the plastic surrounding the screen on the inner.
Regards
Yeah same here... six little dots on the left of the screen and attendant shiny keys... bah!
I have ordered a Krussell case and was hoping this would fix the problem, but it sounds like it might not (although I'd rather the case got damaged than the device).
What about those of you with Piel Frama cases? The fact that they are a bit chunky and prevent the device from closing fully sounds like a godsend now, doesn't it?
I have an MDA Pro and I don't have this problem at all, there is a good gap between the screen and the keys.
I'm not sure if its the same for all MDA Pros, or if I've just been lucky.
Good for you that you don't have those marks. I only have them on the screen side so i guess it happens when the device is closed.
I have the krusell case. No luck, the plastic has scratches too. Only after 4 days, mind you.
Has anyone had POSITIVE results after complaining?
dot dot dot
This issue is a design flaw and therefore should be repaired/replaced under warranty. I have had five xda exec's due to this problem or that, and on number five I was adimint I would not get any shiney spots on it so I removed the little rubber stops and now I have my own home made stick on rubber stops which when I look through when closed I can see daylight...and no shiney spots so far....but I would say we should get together and do a major complant about this issue..I can not belive how HTC built the best phone I have ever owned the XDA2 and the very same company have built the worst one I have ever owned too.... the XDA exec
I've got shiney keys on the right and left of my keyboard on my mda pro but no marks on the screen,
I've been using a screen protector since I received it, all bar two days of trying to work out why the screen stops responding.
The shiny marks should be next to the screen and not on it. It's VERY annoying!
I have shiny spots both sides of screen, krussel case with shiny spots on clear plastic, AND - The screen swivels a bit on the hinge as you open and close, leaving a horizontal line above the top four center buttons on the keyboard, where the bottom of the screen above the hinge touches. Anyone else got this line?
so far no problem with this hinge causing a line.
I have the faded plastic of the krusell case though
Silicon Case
I protected my Dopod900 with a silicon case since I don't want to put scratches on it, I think it works fine. Take a look at it.
ive had my exec since november. If i call o2 and make a fuss about the damage i have from the keys will they replace it under warranty? How many people have managed to replace there exec's due to this problem?
But what even if they replace it??? This is a design fault and in all likelihood the next unit you will get will start having these marks in a few days of use.
But yes we should all make a fuss so that O2 finally pushes HTC to correct the design fault.
Regards
I am so upset, i just got my universal on saturday, i have been enjoying it but i could not use it as a phone because i needed to unlock it. I had the damn thing in my pocket and was on a phone call on my other phone in the car, in my front pocket, not back. Got out of the car, walked into the hall and opened it and there it was, A BIG UGLY black gash on the screen, the screen cracked, it just in my pocket!!, closed too! Where can i get this fixed, i am in the states and the phone is not sold here so i don't know here to get it fixed. Please, the LCD liquid has made a dark smere across the left side, i need help, please. Also what is the best case to get, so this does not happen again?
Check Pocket PC Techs. They will replace the screen for you.
how?
Please how do i get to them?
ok
ok, thanks, thats really expensive, ok, what is best case to use for this device?
Broken screen resolution
Ok thank God i don't have to pay over $250 to get my screen fixed. T-mobile Uk agreed to replace it since it was gotten through them. The way this still happened baffels me. I have had my MDA3 for over 6 months and it has fallen about 4 times, and stuff and it still works fine, but the exec screen broke while in my pocket. Strange. My question is that, for people who have an exec, do you leave it in laptop mode or tablet mode most of the time, and have u had to replace yours or do a repair?
Broke my Wizard to, im so damn worried about my universal. Don't got the money over to fix that screen if it's gettin broke, have had almost all pda phones you can get in .se and never cracked any screen but damn qtek ive done it on
I use a krusell case but not because it is the best but because it was the only one available on hand. It cost 29€ here in spain.
Also, I never leave it in tablet mode in my pocket. Always in Laptop mode.
It's only in tablet mode while it's on my desk.
Purchase a metal case. You can keep it in PDA mode and view the screen while inside the case. It also has a belt clip
UD.
Thanks
I pray the second one does not break when it arrives, it is too expensive to fix these things. Can you post a link to the case? i have looked at most of the cases on here, i think i will go with the one for the T-mobile side kick 2, it is cheaper and looks ok. I just need something with a strong belt hook and is well paded, so if it is on my hip and something actually presses on it this time, it will not break.
I must admit , I feel my Unirversal is more vunerable than any other device I have ever owned - can't quit put my finger on why , but I feel as if it wouldn't survive being dropped as well as myXDA, XDAII , s100 , or wizard for that matter !
The XDA / XDAII came with a nice case vertical flip case with a metal plate in the flap - which would be ideal in my eyes , but I have only seen one like that on Ebay for the exec (Via hong kong! ) and I suspect the one you actaully receive may be different (horizontal )
here is the krusell case link:
http://www.krusell.se/product.php?productID=2095&category=7
and here is a metal case link:
http://www.proporta.com/F02/PPF02P05.php?t_id=1355&t_mode=des
hope this helps
I had an XDA 3 and used a metal case. BIG ERROR!
one day the belt clip connector of the case broke and the device fell down, cracking the screen.
For my Mda Pro I ordered one Piel Frama case, which has not only a belt clip but also a fixed belt latch (you can take of original clip and then below) which should not break.
Also this case protects the device from all sides and seems to be thick enough to give it good protection in case of falls.
Details here:
http://www.pielframa.net/prodi.asp?ID=412
case
Replies, thank you all for your reply, i think i will go with a leather case, the metal ones are not attractive. The funny thing is that i just sent the phone back today, now it is gone, and as i got home, i got the unlock code from t-mobile UK!!!. DAMN!! I think i just have a bad luck week.
You can get cheap leather case with all sort of design off Ebay. I got mine from there and the quality is not bad at all
Piel Frama does NOT have a belt clip.
UD.
P.S. Some reviews:
Piel Frama leather case
http://pocketpcdubai.com/i-mate_pielframa/jasjar/review.html
Brando Metal Case
http://pocketpcdubai.com/reviews/brando/metalcases/jasjar/review.html
Proporta Alu-leather case
http://pocketpcdubai.com/reviews/Proporta/cases/jasjar/review.html
@universaldoc
check the link, I posted. I speak about a different Pielframe case. And this one HAS A BELT CLIP.
@BlackICE,
My bad! Thank for you for the correction. I thought you were referring to the standard case.
UD.
Just as an observation, the reason the screen would crack in your pocket would be something sharp hitting it? Could this not be easily solved by always making sure that the side of the HTC with the screen on it always faces towards your leg and not towards the outside? Sounds like an easier option than buying a metal case anyway :?
i usually keep my xda exec in my front pocket ... i'm not really a fan of cases esp. for the htc universals .... somewhat tacky ...
HTC
I had 15 cents in my pocket when it happened but i doubt that had anything to do with, it may have but with the way the coins were, i don't think so. I think maybe cause my knees bent, it stretched my trousers and that caused it (can't stop thinking about that day, ::sob::sob:.
With my MDA3, i always used the case that came with it, i like that, cause the case only holds the device. Thanks for your advice, :wink: i just ordered that ALU-Leather yesterday, but i am thinking it will be uncomfortable answering the phone with that leather all around it. I will see how it works out when it gets here but protection is number one now, i can't keep shipping it back to the UK. To people with cases that house the unit, do you answer the phone with the leather all around the unit or u use bluetooth, or you take it out of the case?
Hi
I fixed my stylus on my vario(wizard) as it kept falling out.
I now have the same problem on my Universal (JASJAR).
Is there a thread for this already as I cant find it, if not could you please tell me how to keep it fixed in.
Thanks
Steve
I have the same problem with my T-Mobile MDA Pro. does anyone have a solution?
wassa said:
I have the same problem with my T-Mobile MDA Pro. does anyone have a solution?
Click to expand...
Click to collapse
I put some office tape on stylus and now stylus is now fixed in MDA Pro. That is temporary solution, I must replace tape cca 1 on month :-(
did you buy a new one?
my old stylus was very much loose, but i bought two new stylus/ballpoint pens and they fit very snug
thefunkunfaked said:
did you buy a new one?
my old stylus was very much loose, but i bought two new stylus/ballpoint pens and they fit very snug
Click to expand...
Click to collapse
I buy 1 new pen/stylus, but he broke when I harded tape onscreen :-(
happen to my old exec (its when someone put the stylus in the wrong way :evil: )
get a small piece of paper (really small) colour it black and stick it in the hole. served me well. you won't even notice
budo*85 said:
happen to my old exec (its when someone put the stylus in the wrong way :evil: )
get a small piece of paper (really small) colour it black and stick it in the hole. served me well. you won't even notice
Click to expand...
Click to collapse
Yeah, some idiot did that to mine too- that was the last time I let anyone but me touch it.
Ditto. I can't tell you how many times people have done that.
Something i did with my first MDA Pro, was to bend the plastic part of the stylus VERY GENTLY to one side. After i did that, it fitted much more snugly into the slot..... although obviously you have to be careful not to snap the plastic part of the stylus off
my stylus is also loose. is this a common issue w/ d HTC univ?
im looking 4 a stylus-pen 4 d univ but cant find 1 here. :?
adamdon89 said:
budo*85 said:
happen to my old exec (its when someone put the stylus in the wrong way :evil: )
get a small piece of paper (really small) colour it black and stick it in the hole. served me well. you won't even notice
Click to expand...
Click to collapse
Yeah, some idiot did that to mine too- that was the last time I let anyone but me touch it.
Click to expand...
Click to collapse
lol in all fairness it was by little 5 year old cousin (let him off)
the paper trick i wrote does work and was more than happy with it (although got a new exec via insurance so it does not really matter)
TJ i would not say it was a common fault with the universals, i think it would be classed more as misuse.
i got a pack of 4 stylus from 02 (lost both of the original ones on drunken night outs :evil: lol) i think it was £9ish for 3.
paper works great ty
Solved for me
Yes, I had the same problem with the stylus, never stay in place, so I put a little piece of the screen protector inside so this way the stylus is always in place and strong.
Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.