Some Final Questions before upgrading to WM2003 - MDA, XDA, 1010 Software Upgrading

Hi...I am about to go about my second upgrade of an sx56, on my prior sx56, I used the program off the siemens site, and it fried my phone,...I got a warranty replacement unit, and now I'm considering trying again using just the SD BootLoader method...
Here is my current setup:
SX56 Used on ATT Wireless GSM Network in USA
ROM version: A.21.02 ENG
ROM date: 10/17/2003
Radio version: A.20.10
Protocol version: 324e4
My main questions that I can't seem to find solid answers to within this forum are as follows:
1. Using the SD Bootloader method, should I pretty much be alright?
2. Do I need to check my Wallaby Bootloader version number, or should any version work just fine?
3. Do I need to remove the SIM card or not during reburn of the ROM?
4. Do I need to worry about any compatibility issues with my Radio Stack? (I do want to continue to use this as my phone!)
5. Any known issues if I burn to my SD card using my cradle? Or must I use an SD Card reader?
6. Any other known issues to be aware of?
Thanks in Advance!

Related

Unlocking T-mobile Pocket PC

Hello,
I have purchased just last week T-mobile pocket PC in the US, however now I am back at my home (Eastern Europe) where we use GSM (Alcatel)
The following is rom and radio version:
Rom version: 3.14.40 ENG
ROM date: 11/26/02
Radio Version: 6.18
Protocol version: 324e4
My question is what do I need to unlock this to work with my GSM company. When I paid for this ($625) I paid a phone withouth service activation.
Regards,
Bucky
Hy.
Why don't you try this question in the unlocking-section?
Why don't you read the other tasks in this section?
To unlock your T-Mobile pocket PC you need a serial cable to connect your PC with your PDA and the XDA-Manipulator-software from www.xda-developers.com
An other problem that exists will be the different GSM frequencies. As you have in USA 1900MHz you'll have in europe 900/1800Mhz. But i'm not sure if this is really so. You have to take a look at your provider (Alcatel)
Regards
Stefan
Stefan, thank you very much for your prompt reply.
However, I have been reading that the unlocked versions of T-mobile
had a Radio Version 3* or 4*, and the RADIO VERISION on my T-mobile is 6.18, thus I am not sure if this software will work out or not.
Please reply as soon as possible if you know the answer to this one.
Hey Bucky.
Most people hav Radio VErsion 3* oder 4* becuase this are european Radio Versions.
The US VErsions have othe numbers like your 6* .....
Like the posting of a XDA Developer the manipulater should work with all available Radio VErsions.
Just try it......
I see. However when I read the xda manipulator, the developers say that they have tried this only on radio version 4.06 and 4.10
Quote: " We've tested this on Radio version 4.06 and 4.10. If you dare, please let us know if you find it to work on other radio versions".
I didn't find any message that someone tried with Radio version 6.18
Do you know anyone that has tried this on US versions of T-mobile?
We have reports of succesful unlocking on US versions as well. XDAmanipulator will work with any radio version.
Peter
Hey just to add I have been one of them. You have pretty much all the same settings as mine. Just follow the instruction on the manipulators site and it will work fine. You will be done in seconds.

how to start unlocking xda 1

pls help me unlock my xda1. what tools will i use?
here's the device information:
ROM VERSION: 3.14.40ENG
ROM DATE: 11/26/02
RADIO VERSION: 6.18
MODEL NO. PW10B1
PLATFORM: POCKET PC
tnx.
www.xda-developers.com/XDAunlock/
tnx for the reply!. does my xda specification qualify to be unlocked using xdaunlock? i haven't tried unlocking some smart phones, its my first try. does it involve any reprogramming the bios or something? thnx!
Just go to
http://wiki.xda-developers.com/wiki/UnlockWiz
and follow the steps.
Thats all.
Greetings, Kaputter :shock:
i tried xda unlock, but it says error getting unlock code... what will i do now... im badly in need of some expert help here...
then you need to flash your ROM with SER v 1.2 which will unlock your device with the first boot
I'm trying to unlock my old XDA, I have foolwed the instructions given on this site but nothing seems to work......HELP!!!!!
The device information is as follows:
ROM version: 3.17.03 ENG
ROM date: 05/15/03
Radio version: 4.20.00
Protocol version: 32554
Trying it via the USB sync.
Any suggestions??
Unlocking XDA 1
I have read and read and read the forum on how to unlock my XDA 1 (XDA II was a sinch!) but the XDA 1 is causing problems. I started with the error below and tried upgrading my ROM - getting error messages on not being able to unlock and that I needed W Modem.
Can upgrade using SER 1.2 without a unix box, then unlock all using the USB cradle?
Hope someone can explain in even more simple terms
Appreciate it!
I notice that ser 1.2 works with TMobile in the USA but doesnt say anything about ATT Wireless.
Should I infer that the ser 1.2 isnt a good idea then?
My PocketPCPE is :
ROM:A.30.09
Rom Date: 01/01/04
Radio version: A.33.02
Protocol version: 1.3.3
Unit is a wallaby PW10B1
Thanks for any advice you can give.
Flash your xda using ser 1.2, this will unlock the xda, I suggest backing up your existing rom to sd card or using xdatools, once you have flashed the xda you can then restore your original rom using the sd card method. Using sd card method overcomes any country id/incompatible rom errors.
A Unix box is not needed, just a standard pc.
Flashing with SE1.2 isn't always enough. I've got an XDA-1 from T-Mobile that shipped with the following:
ROM 4.01.16ENG
RS 6.25.02
Flashing it to SE1.2 worked fine, but the XDAUnlock gave same "Error...unlock code" msg others have seen.
I'm very hesitant to get into RS flashing (for obvious reasons) but there really doesn't seem to be any other way around it in this case. Then again, I worry even that won't really solve the problem (e.g. if I go back to 6.25.02 RS won't the problem potentially just return?).
Hoping for some help unlocking it without RS flashing.
You could try xda manipulator and a serial cable, otherwise I think radio stack will need to be changed, before doing ANYTHING with the radio stack please read on this forum all the problems you may encounter, hopefully there will be a solution for you among these pages.

Siemens SX-56 Upgrade

Hi all,
I'm a newbie as you will probably be able to tell shortly from my question below. I recently purchased and upgraded my Siemens SX-56 from the xdadevelopers special edition rom to a wm2003 I cooked at lumpistefan's rom kitchen. The upgrade was smooth as a baby's butt. Now, I have read about radio stack upgrades in this forum but I have no idea what RSU is. Do I need to do a RSU? If so, I would like to know how or be pointed in the right direction. I really read the forums and search for answers so please do not refer me to the search engine. The current device info is now:
Rom Version: 4.01.16 ENG
Rom Date: 2/4/04
Radio Version: A.20.10
Protocol Version: 324e4
Thanks in advance.
if your gsm works DONT mess with the rsu radiostack
it's the embedded software controlling the gsm part of the xda
and if it crash or make ones xda turn into the EU gsm system or US gsm depending on where one is located then one is in for a world of trouble
sx56
Thanks, my phone works fine so I will let sleeping dogs lie. One question...if the phone works, does that mean my gsm is working?

Wallaby Siemens sx56 unlock

I have read many posts on this site that pertain to unlocking the Wallaby.
I have not actually tried it yet becuase I read that the XDAtools does not work on a wallaby without wmodem.exe. I happen to have a unit that seems to old for the XDAtool unlock and I want to make sure I have this straight.
The Wallaby is:
ROM Version: A.30.09 ENG (upgraded from ppc2002)
ROM date: 01/01/04
Radio version: A.20.10
Protocol version: 324e4
Model No.: PW10B1
Thanks,
Kevin
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock
Thanks
Thank you! This seems painless.
hello i bought a 6315 on ebay, i want to use it in latin america, gsm 1900, i need to unlcok it, room version is A.20.10 i wanted to download the special rom, but the link doesnt work and room folder on ftp is emty, i know is an old phone,can someone help me please unlock it? [email protected]
Insteed of posting same thing multiple times you should read much more.....
Try this link here for help:
http://www.romkitchen.de/tools/
Stefan
Xda Pw10B1
Hi there. I would like to know whether you can upgrade the ROM version of the Xda to a recent one and also if you can unlock it.
rom http://www.romkitchen.de/
unlock
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2

The phone is not ready. Wait 15 seconds and try again.

ok so i too have had the message
"The phone is not ready. Wait 15 seconds and try again."
Click to expand...
Click to collapse
but after alot of experimenting i have found a solution. i thought i'd post this to help anyone else out with the same problem!
I bought an M600 on orange PAYG however on inserting my orange contract sim i can use the phone but cannot send SMS messages or adjust phone settings, if i attempt to all i get is the message above.
having spoken to orange about this several times it turns out to be a sim compatibility issue. orange however do not support sim swapping all they can do is send out sims compatible with the handset they sent you! i.e the N73 i got on upgrade.
So my solution, i paid imei-check to CID unlock the phone, i actually already unlocked the phone using lockiwiz but that will only remove the simlock on a G4 and AFAIK imei-check are the only people to unlock the CID.
once unlocked i backed up the shipped rom to SD as described in the prophet WIKI (just in case i needed to restore it to orange settings) and then upgraded the rom.
i tried several shipped roms and eventually found this rom the
RUU_Prophet_220734_2207114_024721_?QtekWWE_Ship.exe
Click to expand...
Click to collapse
to not only work but also be in english. its a great rom, very basic without all the junk orange supply as standard
I don't really know why this has solved my problem i think its something to do with the radio rom but whatever it is it works perfectly!
below is my phones new info, if someone with the orange Rom could post the same I'd be interested to compare the versions.
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
I hope this helps someone out there!
for discussion purposes
That sounds weird why it works like that since my understanding of unlocking CID was merely so that one could install different ROMs. Someone pls correct me if I'm wrong here.
nrewq said:
That sounds weird why it works like that since my understanding of unlocking CID was merely so that one could install different ROMs. Someone pls correct me if I'm wrong here.
Click to expand...
Click to collapse
it is!!!! i needed to update the rom to get it to work! as above i stated that i changed from the orange rom to the qtek one, hence CID needs to be unlocked
So my solution, i paid imei-check to CID unlock the phone, i actually already unlocked the phone using lockiwiz but that will only remove the simlock on a G4 and AFAIK imei-check are the only people to unlock the CID.
once unlocked i backed up the shipped rom to SD as described in the prophet WIKI (just in case i needed to restore it to orange settings) and then upgraded the rom.
Click to expand...
Click to collapse
Afaik, if you remove IPL/SPL from the ROM (There should be tutorials somewhere around here on how to do it) you don't have to CID unlock your phone.
I would really like to try this! I am always getting the same error so often whenever I send a new sms. I have an i-mate JAMin, prophet touch X ipl&spl 2.20, gsm 2.69. I can't find the ROM you're talking about in the xda-developer's ftp. Can you please upload it? Thank you so much!
its on the wiki page
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Okay If I installed this, do I have to reinstall wm6 and then my current ROM again(Prophet Touch X)?
yes i expect so, i'm no expert, thats just the way i solved the problem on mine!
i think it has to do with the radio rom version
You can update the radio ROM without having to change the normal ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
I am currently using v2.69. Does it mean I have to downgrade or test other versions? How about you? What version are you using guys?
hey as i stated, i'm not entirely sure what eaxctly it was that the replacement rom fixed but it did fix it!
Are you guys using orange M600s? whats your rom info?
mine was:
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
unfortunately i had my phone stolen so i can't help much more than that.
Okay I have fixed mine. I tried all versions but only version 2.30.21 of Radio ROM only fixed my problem. Thanks guys for all the help.
jifop said:
:
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
Click to expand...
Click to collapse
I had the same issues, updated my M600 to the above ROM and it now works perfectly
wow - does that mean you guys are using a 3g sim in a orange m600??
if so - what is a radio rom (and what does it replace?)
can you run these radio roms with wm6.1? or does it mean going back to 5?
sorry for all the questions i am despirate to get my phone working!!
I have a similar problem, going to try the rom you recommended but thought I'd post my pre-rom stats.
below is my phones new info, if someone with the orange Rom could post the same I'd be interested to compare the versions.
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
Original version
ROM version: 2.10.1.22 WWE
ROM date: 2/16/06
Radio version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Hopefully this new rom will sort my problem out.
something i also have tis problem too. i solve it by go to comm manager, turn off the phone den on it again. den it was fixed~~

Categories

Resources