Database Users

XDA Rom Flash crash, need help to solve, have 1 working XDA!

Hello,
can someone please help me?
Needed to unlock my XDA goes nobody could do it here ;-(
Crashed in the upgrading screen:
it wil take about 5 minutes ....
Has Wallaby Bootloader V5.15
I have already a ROM file NK.nb1 file from the ROMkitchen,
but i don't know how to get it working on my messed up XDA.
Have read a lot in this forum but really don't know much about programming ;-(
is it possible to make a copy from my working XDA (with XDAtools) and then replace the NK.nb1 file or something? and how can i get it into it?
read a lot about Bootloader but sorry don't know how to handle ;-(
If someone could help me -> THANKZ
Greetingz from Holland,
Marco

ok...
if you dont have an SD-CARD reader, get one!
then, from ROM UPDATE FORUM, find and download XDA TOOLS.
RUN xda tools.
it will ask you for source, (most likely C:\program files\RUU\ENGLISH)
and will ask for destination, since xda dont work, use SD READER
Start Copying to card
when done, insert card into xda
reboot via bootloader ( thats when you powerup with on/off button pressed and soft reset)
IT should detect that there is a system on the card, and ask if u want to install it.
press the ACTION button for yes. (thats the big silver button between the fone buttons)
thats realy IT
if you need more help... email me, or better yet add me to MSN messenger, if u have one. i'll walk you thru it.
thanks to a great warranty, i've practiced and tested alot of xda's
but now that i mastered it ( i think) i stuck to one

Thankzzzzzzz
It worked
Was a little late so i didn´t do it wright myself
Copied the file to SD
instead of doing it with XDA tools to SD
Works now fine.
Had some trouble with GSM and T/mobile card, but copied with XDA tools from working XDA to SD and now it works.
Keep this file on an SD card so now i can try to load ROM´s or upgrade to 2003 cause i can always put it back, so no risk!
Thankz Again,
Greetz Marco

I created one nb1 file using Jeff's kitchen, use XDATools write it to a SD Card, slot it into my XDA, press on/off button + soft reset key, bootloader screen (wallaby bootloader v5.17) appear, and say 'GSM OK', if press Action Key now will bring me to "Diagnostics" menu, if press Calendar key bring me to "Utilities" menu, if press Contact key bring me to "Flash Tools" menu, and if press Record Key bring will me to "USB Flash Mode", it didn't auto detect the SD card to allow me to flash my device, may I know where have I done wrong, anybody help? Thanks!

Sounds like the ROM imaged didn't make it to the SD card.
Do this test and report back on your results.
With the SD card still in the slot do a soft reset, if the image is on the card
your XDA should ask if you want to format the card.
HTH

It did ask me whether want to format the SD card.

Ok give it another shot but this time try using XDArit 1.0 to right to SD.
For more info. on XDArit visit: http://www.xda-developers.com/XDArit/
XDArit version 1.0 can be download from the software section at:
http://www.yorch.net
Just in case here is my how to use XDArit to write nk.nb1 or nk.nbf to your SD card (aka the Bootloader Method!)
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you’re going to use a .nbf file you’ll have to manually change the “Files of Type” to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You’ll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
HTH
&
Good Luck

Hi Qman, I followed exactly your instruction, but still the same wallaby bootloader screen, I can't see any sd download screen???

Sorry to hear that, I'm not to hip on wallaby bootloader v5.17 but
it works just with wallaby bootloader v5.15 works!
HTH

Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?

ycneosg said:
Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?
Click to expand...
Click to collapse
many ways to download bootloader to 5.15!
read the old threads you will see how!

Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...

use SD to restore your system if you have backup!
if you still have problem to get your phone life back, send to me I will fix it for you!

I forgot to tell you, I haven't got SD :evil:
I've been using .EXE

ritmo-unido said:
I forgot to tell you, I haven't got SD :evil:
I've been using .EXE
Click to expand...
Click to collapse
Wow!
I could help you to fix it, if you send it to me!

similar situation but somewhat different.
I cooked a rom in kalex kitchen and wrote it to my sd card with my t-mobile pocket pc phone connected to activesync. I then flashed the phone from the sd card but got a checksum error at the end. I did a hard reset but only got a blank screen. Right now I can access the bootloader but that's it. I don't have a good backup rom because (not thinking) I wrote over it with the rom from kalex kitchen figuring it would become my backup (it must have somehow been corrupt). I tried writing the rom I previously had on my phone to an sd card directly through a card reader on windows 98, windows XP and windows ME all with no success. Thus, I'm dead in the water. I have no clue why I can't flash to the card reader. I went through a ton of posts here but have not found the answer yet to get me back working. Does anyone have any ideas on this? I have no clue why xdatools and xdarit are not working (especially on XP - I know they should not work directly to an sd card on windows 98 but I tried anyhow out of desperation). Please help.

got it working
used xdarit on another pc running windows xp and successfully wrote the rom to the sd card using my card reader. i then flashed my phone using the bootloader method and i'm up and working again!

can't get the xda to load from sd to upgrade to WM2003

hello,
i'm using the xdatools to put the nk file on the SD card, but when i hard reset my xda, i get into bootloader 5.22 mode, it says "gsm ok", and when i press the action button i get into a test menu.
How can i load the nk file from my sd card? please help.
thanks guys.

Did you place the ROM on the SD card by browsing to your device (...) or using the drop down and choosing your SD reader or XDA SD slot?
I had the same problem until I used the drop down... if you browse to your card, XDA tools will not create a bootable SD.

i used directy dropping down the box to SD

When you use the drop down menu on the destination there should be a drive letter next to your card eg: F: 59.60M USB sd reader or similar, choose that and it should work.

do we soft reset or hard reset
well after loading nk.nbf file
do we soft reset or hard reset to get into bootloader.
also,
the drive letter in destination folder will come if u use card reader,
but if in expansion slot than it does not give the drive letter.

Hello
I did hard reset .

I am having this same problem...
I download to the SD card through the cradle, using the phone's expansion slot. I do a SOFT RESET, to get the bootloader, and all I get is a GSM OK message. If I hit the action button, I then get into the test menu.

Hello
Means you have no nb.1 on your SD card .

as per the instructions I've been following that have been listed in detail here on this site as well as the att siemens support forums, you are supposed to copy the nk.nbf file and use that with the OS Image tool...is this incorrect?

OSImage
I just installed new ROM from new ROM Kitchen .
http://lumpistefan.dyndns.org/
1) Get the file on your desktop ( download or ...I do not care)
2) Open OSInage
3) Source :arrow: Brows to your file
4) Destination :arrow: your SD card (where is it :?: -on your phone
or on the SD card reader)
5) Copy the file to SD card (takes 20 seconds)
6) Remove the XDA from the cradle and soft reset with power button held in.
7) When it says press action to download, push the big button between dial and hangup.
8) Hard reset.
9) Injoy the rest of your day

No way getting SD-Card recognized
Hello,
i have the same problem, the ROM (Made with xda-tools or XDArit) on sd-card is not recognized to download when i boot into bootloader!
I found no way to get this running.
Any ideas?

read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again

andhy said:
read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again
Click to expand...
Click to collapse
I'm in the same situation - I have v6.22 on T-Mobile 4.01.00ENG and can't do anything, even with an SD card!
Even the BootLoader downgrade tool with XDATools doesn't work.
Any help with this would be appreciated by many other users in the same situation.

The downgrade batch file in XDA-Tools doesn't work for a lot of people (didn't work for me either). However the wallaby patch should work. Otherwise, use XDARit to downgrade the bootloader using the .nb0 file that comes with the downgrade batch in XDA-Tools.
You write the wallaby patch onto the SD card using XDARit, go into the bootloader and enter diagnostics. Then take the SD card out, write bootloader 5.15 onto the card using the bootloader option in XDARit, and place the SD card back into the device. Then from the patched diagnostics screen select Restore SD and it will recognize a bootloader update. I'd recommend saving your original bootloader from the diagnostics first, but that wouldn't work for me for some reason.

i had a 5.17 boot loader that i downgraded to 5.15 via OS image tools, i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing

i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing
Click to expand...
Click to collapse
Try using XDRit instead of XDA-Tools (use the older version of XDRit instead of the newer version). I'm not sure what you mean by "test phase", but maybe your bootloader screwed over during the update? If so you may need to rectify that first, but that's definately beyond me. If you burn the image correctly onto the card it should pick up automatically as soon as you enter the bootloader with 5.15. If you don't burn it correctly then it won't be picked up.
I'm just throwing in my 2c because I've made all this stuff work with a 5.15 downgrade. There's a possibility the thing simply doesn't like your card too, so try a different 64MB SD.

well i do have a 256 mb card & as far as i can tell the downgrade worked fine, now to use the xdarit files to i need to have the SD reader or i can do it the same way i do in XDAtools which is directly into the card through Active Sync

where i am going wrong!!!!!!!!

hi,
well i tried to upgrade my xda1 to windows 2003,
here is the description of the problem i m facing....
i used xda tools(osimage tool) to transfer nk.nbf file to my sd card-> go into bootloader(wallaby bootloader 5.17)
->says gsm ok and starts taking test(like tap test, recording test, sd card test etc) which it should not...
and is not loading the os software. (getting stuck in one of the test like sd card test)
well following things i tried:
1. transfered nk.nbf file, tried both from siemens site as well as from yorche.net site--->both giving same problem.------->using xdatools.
2. tried loading the sd ,tried both destinations -->xda slot and as well as the card reader.
3. using drop down only to choose the destination.
4. also after loading sd the current rom asks to format (which means sd is loaded properly)
5. initially it was not loading the bootloader then i fixed it using xda tools , after that i started getting wallaby bootloader 5.17
6. now after going to bootloader it starts taking various test and shows no sign of loading the new os.
--------------
now i have moved as per the instruction and tried everything mentioned above to install wk3 but all in vain....
dont know where the problem seems to lie....
need suggestions desperately...
--------------
current rom:3.17.03
stack:4.21
--------------
current rom working ok.
--------------

maybe it's a problem with the nbf file content ... did u try burning the nbf file directly to the ROM using the XDAtools ?

You arent hitting any other button when entering bootloader are you? Just press the stylus in reset while holding power, it shouldnt go into test mode unless another button is pushed, maybe you have a button stuck or something.

any more suggestions............
well if burning means choosing source to nk.nbf and destination to drop down
to sd card using xda tools then yes i did burning....
also i m sure no other buttons are pressed or thing like that....
any more suggestions............

I meant by burning to make the destination to be the XDA flash ROM

any more..
ya i tried burning to.,...
same problem.

can your sdcard reader read whats on the sdcard (it's not suppose to be able to read after it's been flashed with the rom)
also are you 100% sure that your nbf file is valid ? maybe it's broken

more suggestions ....
well after loading sd card , i cant browse to read it, moreover xda asks to format, which is the sign that card is loaded ok.
secondly i have tried nk.nbf file from siemens as well as yorche.net,
both should not give same problem, which it is.

this mention the 5.17 bootloader you should read it
http://wiki.xda-developers.com/wiki/WallabyBootloader

Rudegar said:
this mention the 5.17 bootloader you should read it
http://wiki.xda-developers.com/wiki/WallabyBootloader
Click to expand...
Click to collapse
The best way that I've found is to find somebody with a XDA that has the 5.15 bootloader then do a CE+BOOT TO SD then do a SD restore.
Sounds like a good project for some of the ROM Kitchen owners doesn't! :wink:

AUSSIE HELP wanted for XDA ROM upgrade

Hi,
I posted earlier http://forum.xda-developers.com/viewtopic.php?t=6418, and I have played around some more with the XDA with no success. I have now bought a 64MB SD card and am unsure as to how the ROM image on my PC gets onto the SD card. This is how I have been doing it:
1) Insert SD card into XDA
2) Place XDA into cradle
3) XDA then ActiveSync’s to the PC
4) Run OSImageTool.exe and select the following –
a. Source: “C:\Documents and Settings\Paul\Desktop\orig.nb1”
b. Destination: “XDA SD card slot – unknown size”
5) Then I press “copy” and I see the progress bar go across to 100%. After this appears to finish, the program just sits there not telling me it’s finished. I assume that it’s all okay and I then close the program
6) Take XDA off cradle and hold power button down whilst doing a warm-reset
7) The following appears: “Wallaby Bootloader v6.22 – GSM OK” – nothing else happens, and from what I have read it is supposed to ask if I want to perform a ROM upgrade. However, I can get into the diagnostic and flash tools by pressing the action button etc, but nothing is in there to upgrade the ROM.
Does the fact the OSImageTool destination says “XDA SD card slot – unknown size” matter? I’m assuming not because when I have transferred the ROM using the above steps, the XDA asks if I want to format the card; meaning that the transfer worked okay. Do I have to have an SD card reader/writer on my PC to get the ROM onto the SD card?
I have read a little about a Bootloader patch – do I need to run this, and how do I get it onto the XDA – using the same method?
What I would really appreciate is to physically speak to someone in Australia who has done this before who can spend 10 minutes on the phone with me. I guess I just need a number to call, and you could PM me or MSN me ([email protected]) so I can contact you or give you my number (whatever you’re comfortable with). I would be very appreciative of any help that can fix this, as all I want to do is get my three-day old XDA working again!
Any other comments and help in relation to solving this hair-challenging issue would be great!
Thanks,
Paul…

Hi mate, it looks like you need to patch the bootloader, read here:
http://forum.xda-developers.com/viewtopic.php?t=5923&highlight=patch+bootloader

This is the only guide that works for patching the bootloader (I tried them all before finding the right one) :
http://forum.xda-developers.com/viewtopic.php?t=3274
Yes, you do need an SD card reader/writer, if you search around you should be able to get a cheap one. If you read that guide you will be able to upgrade from SD card/bootloader.

help
hi! i downloaded the windows mobile for tmobile in yorch.net twice now, whenever i EXTRACT the file this always comes out "T-mobileROM40021\NK.nbf could not be extracted correctly!".
Need help.. do you have any suggestions on some alternative sites so i can download it again?
thanks

How to fix failure during upgrading ROM

I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.

Seif said:
I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.
Click to expand...
Click to collapse
Bro, you shouldn't change the Sd fat you erased what's written on it anyway your unit is still on the safe side and you can bring it to normal.
First of all downgrade your bootloader to 5.15 >>>
goto this http://forum.xda-developers.com/viewtopic.php?t=3274

Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards

rafia said:
Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards
Click to expand...
Click to collapse
You need XDArit to write the rom to your SD read the past post on how to copy rom to your SD which is the safest way of installing the rom into the device, by using XDAtools press on FIX BROKEN BOOTLOADER this will downgrade you bootloader to 5.15 don't forget to connect your unit to the cradle when you want to downgrade.
I recommend 1rst of all to make a quick search in threads to be totaly ready for this
this would help :
http://forum.xda-developers.com/viewtopic.php?t=6581&highlight=downgrade+bootloader
http://forum.xda-developers.com/viewtopic.php?t=2068&highlight=downgrade+bootloader
Good Luck now.

Update : How to fix failure during upgrading ROM
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Good Luck and special thanks to Biso for his help.

Re: Update : How to fix failure during upgrading ROM
Seif said:
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Click to expand...
Click to collapse
Thanks a MILLION for this info. I'm in the same boat, with bootloader 5.22. One question though, when I'm in bootloader mode, which option do I choose from the menu to transfer the ROM to my device from the SD card? Will there be something automatically coming up? Or will I use one of the options listed below:
1. CE ROM TO SD
2. BOOT TO SD
3. CE + BOOT TO SD
4. GSM ROM TO SD
5. CE + GSM TO SD
By the way, so I never do anything to ruin my device again, can someone please explain what each option does?? I really don't have a clue.

as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's

Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!

Linger1974 said:
Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!
Click to expand...
Click to collapse
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck

First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck[/quote]
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?

Linger1974 said:
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck
Click to expand...
Click to collapse
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?[/quote]
Why to worry about the Rogers Rom you know now a way to unlock your phone.
I assume the Rogers rom is based like the At&t rom which it has the sound clipping bug , so I'd rather say that you could cook a T-mobile rom 4.01.16 WM2003 and try it it does not have the sound clipping bug..