Related
I had a JasJar and before it PDA2k and with both I could not mount network shares on my local home network. I write the address in file explorer in the format \\10.0.0.23\share where the share share does not even have a password and is share to everybody and the phone can not recognize the share.
It does see other devices on the local netword for example it can browse the Internet and access my routers web based admin but not the share.
Other computers on my home network can access the share.\
I heard there are programs that help in doing this, but is there no direct or free way to do this?
Try using Resco File Explorer in which you will be able to map shared network folders and then you can access them from File Explorer directly, it even support possword protected shared items.
Im using the standard file explorer, it works fine. I start by typing \\P4 which eventually shows my shares, and then I can navigate as I want.
Cheers
Nasdaq
still can not connect to share
Nasdaq, which version of windows do do you have the share on. Are there any special settings?
It gives me "network path was not found" always then "Network resource can not be found or you do not have the permission to access the network".
The share has no password, on windows it just logs me in without any further input.
I am using the openpath in the file explorer.
May be you need to check once again about IP Addresses and Default Gateway settings, which is not allowing you to connect with your LAN.
--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
that will stop your universal from accessing a share normal windows machines can access.,.
Access shares problem is on Windows XP
This problem is on WindowsXP share not on windows server.
Also the imate can access the Internet and even the administration of the router, so I gues it has full TCP/IP abililty.
Are there any workgroup settings that I need to do?
Sorry for not getting back earlier, my share is on an XP sp1 box.
What I would REALLY like to do is browse my Exec over wifi from my PC. :?
Cheers
Nasdaq
Anyone got any other advice on this one?
Can't access my network shares with //192.168.0.1/ etc either?
Thanks
M.
I can't access shares by using the IP, I have to use the name of the machine: \\azhad instead of \\10.168.2.158
Azhad
Hi Guys,
what is this sharing stuff u r talking about?
Please excuse me for this newbee question but i want to know about what sort of sharing etc can i do with my Exec and Laptop, like exploring files on laptop from Exec or other way around?
My laptop has Windows XP sp2 and i use wireless router to share my broadband
many thnx......
Jatt
Try this up
I had the same problem accessing network shares on my Universal...
I was also typing IP address in Resco Explorer and it was not working.
But I could make it work using the computer name. I have no idea why it work whil with basic ip address it couldn't, but at least I am able to browse my computer folder and play video files.
So try using "\\computername\share" to see if it's working.
forrest.
I tried
I tried doing that, using the computer name. It takes more time to tell me that it can not access the server.
I think that to resolve the name of the computer it needs a wins server, is that correct?
Could it also be in your network settings if you set your network as internet or connects to work?
to Jatt
Jatt theoretically you should be able to create a network share on any computer on your network and be able to access it on your phone. This is really handy since you would not need to activesync to exchange files.
But note that for JasJar/Exec or any WM5 device you can not sync over the network just share files.
To ehabh
Thanks for trying to help me out but can u tell me how do i create a network share on my computer? please
Thanks again
Same problem
I've got the same problem. I can connect to the internet through my router but for the life of me I can't connect to the shared on my PC (XP SP2). I know it's not a problem with my EXEC because I can connect to my PC at work. I can see my PC in the device list but not connect to it.
The first time I tried to connect using Resco Explorer 05 I managed to ge the screen asking for log-on details, but never got any further as it said my passwork was incorrect. Since then I've never managed to get the log-on screen back only an error say the network resource was unavailable.
I've ran the XP network set-up wizard more times than I can count, changed my PC settings manually but still had no luck. Has no one figured out what we're doing wrong?
I didn't really understand the machine name issue as I don't have any WINS or DNS server at home... But for me it worked...
Anyway you should try to temporarily disable your personnal firewall (On the computer you're trying to access) just to see if it is not blocking network traffic for the windows sharing.
If it is the problem, then you have to configure your firwall to stop blocking this traffic...
Sorry, but it's all I know...
Forrest.
I am trying to access my LAN shares from the Hermes.
My hermes has IP address 192.168.254.9 and my server has 192.168.254.3
So on my Hermes file manager (Total commander) I try to reach
\\192.168.254.3\d$
But it can't reach this.
What do I need to do on Hermes and/or server PC ?
Doesn't seem to work when using Active Sync but needs a WiFi connection.
I set up a VPN connection and whenever I try to access a network share it automatically starts up and I can browse the network. I just use the inbuilt file browser.
Actually it kinda works without the VPN but acts a bit strange... will go down the file structure but not up??
Doesnt work for me using active sync over bluetooth with resco file explorer at all.
Active sync gives you an ip address but if i remember its in the wrong subnet completely.
Using wifi and it works perfectly.
mrmrmrmr said:
\\192.168.254.3\d$
Click to expand...
Click to collapse
Isn't this a default share windows sets up for its own?
(these default shares are not available for use, I think they are there either for internal use, or to prevent one from sharing the rootfolder)
Could you try sharing a different folder on the PC?
Make a d:\test, and share this folder; there should be a blue hand under the icon of the folder.
It can help to switch off "Simple file sharing" (in Windows Explorer, Tools > Folder Options > View, bottom of the list, uncheck simple file sharing).
Jörg
it does not matter. I tried both a normal share and hidden shares like d$
Now I captured the traffic between my pocket pc and the server.
if I try to connect by \\192.168.254.3\ my pocket pc tries to resolve name of 192.168.254.3 , but in fact it does not need it.
As it couldn't resolve the name it never tries to connect.
edit:
I figured out that the problem occurs because my wifi connection is not connected to "work" but "internet"
if I change it to "work" I can connect to my shares.
But then, what do I lose ?
mrmrmrmr said:
if I try to connect by \\192.168.254.3\ my pocket pc tries to resolve name of 192.168.254.3 , but in fact it does not need it.
As it couldn't resolve the name it never tries to connect.
edit:
I figured out that the problem occurs because my wifi connection is not connected to "work" but "internet"
if I change it to "work" I can connect to my shares.
But then, what do I lose ?
Click to expand...
Click to collapse
Don't know - maybe a few apps won't like it. But I've got wifi in internet mode and can still do shares... with a little help from "Pocket Hosts" and "NetUse". Not entirely sure where I got them from... try searching on them ("netuse.cab" on the net use one). Set the name/ip up in pocket hosts and use the name in NetUse. I suspect you could use the name in Resco Explorer or any other app that way.
Maybe I just don't understand the question, I always feel dumb after I speak. I installed An app called "pocket lan" and it just sorted it all out for me. Everything works, it was an older version too.
now there's one strange thing I've encountered...
I can access all the files and folders on my pc via wifi, yet only those that i actually put on sharing. Now when I try to reach the default shares (c$, d$ etc) while logged in as an admin it just doesn't let me to do that ... is there a way to log in as an admin ?
btw I'm using Resco File explorer for that thing - it is quite useful and has never let me down but the admin log in just doesn't work
any ideas ?
thank you all...
I hope those apps will help (I couldn't try yet)
btw, I found the following page with FAQ
http://www.pocketpcfaq.com/faqs/networkutils.htm
well, I installed "pocket hosts" and "netuse"
pocket hosts works (I tested with vxutil)
however, when I try to map a connection in "netuse" , netuse does not work.
it is still trying to connect with ost name and makes nbname query on the lan broadcast address.
my server responds with its other IP.
why does not "pocket hosts" work ?
no matter which software I try, I get a "error 53 connecting to resource" error.
When I search for this , I came to the following page:
http://support.microsoft.com/kb/242001
This problem seems to be related to my problem. However, I am not using Windows NT 4
My servers are Windows XP
So what is my "error 53" ?
any idea would help me... please...
Ok peeps i downloaded the remotedesktop.cab from one of the threads in the forum. I installed it but i cannot connect to my pc. Here are the fields and what i put in them.
computer - i put my ip address
user name - i put my admin acc name not the pc name. Is that correct?
password - well yeah....
domain - i leave this one empty, cause i don't use one.
Now, when i click connect...the following appears.
connection status ok
Cannot connect. Likely
reasons are:
1. Specified computer name
or ip does not exist.
2. A network error occurred
while establishing the connection.
Does aynone know what the problem might be???
I use win xp pro sp2
I got a router.
In the field i put the ip thats shown when i visit one fo the "what is my ip" sites LOL.
I am making this reply through my remote desktop connection...
Computer IP addr. is the Actual IP address of you Desktop computer...
UserAcctount info: use the Administrator's user name and password
Domain not needed if not on a enterprise network!
Make sure on your Desktop computer under system setting.....
You allow remote connection to the computer.
If you are on your computer when you connect to it with your X1. The screen will "logout the user out" and show it is being remotely access!
hth,
Stuart
Could someone point me to a remotedesktop cab that is sure to work on the Xperia?
There's a lot of them...
Here is the link to post. There is a reply I made with an attached cab..
http://forum.xda-developers.com/showthread.php?t=457047
I have beeen using this with my xperia without any problems.. I have access:
Xp-sp2-3
Vista 64bit sp1
Server 2000 sp2
server 2003 sp1
Stuart
The above post was assuming your are accessing through your local net!!
If you are accessing through the INTERNET is a bit different!!
The Ip Address Will be the One that is display through Whatismyip!!
But you will also have to make an Entry into the "pinhole" list in your router. This pinhole entry will be pointing to your PC your are trying to access!!
So when you access your INTERNET IP address(router) it will direct this traffic toward your PC!!
Stuart
scl_electronics said:
The above post was assuming your are accessing through your local net!!
If you are accessing through the INTERNET is a bit different!!
The Ip Address Will be the One that is display through Whatismyip!!
But you will also have to make an Entry into the "pinhole" list in your router. This pinhole entry will be pointing to your PC your are trying to access!!
So when you access your INTERNET IP address(router) it will direct this traffic toward your PC!!
Stuart
Click to expand...
Click to collapse
please elaborate...
and something else...
I don't have a tab named "remote" when i click on system. I'm using a custom xp pro and the guy who did it apparently deleted all remote functions Is there a download or something to fix that.
orelsi said:
please elaborate...
and something else...
I don't have a tab named "remote" when i click on system. I'm using a custom xp pro and the guy who did it apparently deleted all remote functions Is there a download or something to fix that.
Click to expand...
Click to collapse
Well on the local network side, your ip address should be 192.168.xxx.xxx. So access directly through your wifi network, You will need the Local address of the computer.
______________
Then on the Internet side. the router/gateway acts like a smart traffic cop! It directs the traffic from your PC destine for the Internet. Also it redirect response traffic from the Internet to the specific Computer that has made a request on the Internet!!
But remote access is different. You on your X1 is Initiating contact through the Internet to a computer that is behind the Router/Gateway. So for this traffic to be directed to the right computer, a Pinhole is created. A pinhole is essentially a direct route through the router for the Internet traffic to be directed to the correct PC!!
Well on a custom XP install it is hard to tell if just the services were turned off. Or they were actually removed!! In this case it sound like one of the Remote access service like GoToMyPC would be easier. Unless you want to re-install a FULL version of XP Pro!!
All is not loss yet! Also check on MS knowledge-base support site. do a search for this exact problem. There might be a download for the remote access service!!
Good Luck,
Stuart
ok so i have a htc snap and i want to remote desktop i have a linksys router and have configured the routr for port forwarding i still cant connect i really need some help
Hy,
what software do you use?
VNC or what else?
its remote desktop mobile RDM it came on my htc snap
What port have you forwarded, and to what IP?
How are you trying to connect, Wi-Fi, 3G etc?
What IP address are you trying to connect to?
I use RDM all the time. I couple it with "Hamachi Mobile" which is a virtual private network VPN app. I log in with Hamachi, it gives me an IP, and I copy/paste whatever PC's IP i want to connect to in RDM... simple as that
Works very well on my Fuze with 3G.
im using port 3389 forward to my computer ip the router gives it i try logging in using my ip addy i get from websites that tell you your ip addy like ipchicken.com but today i went to canyouseeme.com to check port and cant get thru i still am not sure whats going on im very frustrated any help would be appreciated
@MOD
Can we get this moved to the Q&A forum?
I've been having a heck of a time getting it to work also... I would love to see the help on this question!
kliptik said:
@MOD
Can we get this moved to the Q&A forum?
I've been having a heck of a time getting it to work also... I would love to see the help on this question!
Click to expand...
Click to collapse
Ditto...
And now another useless line... as it seems you cannot simply post the word ditto in your message....
...
why does someone always have to try n start something or say some**** bout wut others say.. grow up if u dont have the answer or can provide help i need with dont say anything. but anyways .. can anyone help me with this or what... kdawg
turn off the pc firewall and make sure the user has rdp rights.
ive tried that
this is mainly for win7, but it may help
http://forum.xda-developers.com/showthread.php?t=533664
goodluck
FWIW, I use a program called vncviewer on my Omnia and it works fine. Goes directly to the server seat ip address and I take over that computer. HTH
Make sure in system properties you have checked allow connections from computers running any version of remote desktop and you may need to password protect you computer.
To get real answer just go to ppcgeeks.com this sites has too many annoying people
But what you need to do is go to your linksys page 192.168.1.1
o To Application And Gaming
On the port type in 3389 or start and 3389 for end protocal both and to find out your IP Go To Start - Search Box - Type cmd - Click It - Type "ipconfig" With Out The " " The IPv4 is your IP - Then Click Enable
On Your Phone go to the app
For Computer type in the IP address just got from IPv4
Username of your computer and password of your account
EDIT -- Your problem is you got the wrong IP don't use that IP use the one i showed you on the steps above it should be something like 192.168.*.***
This also helps
http://www.youtube.com/watch?v=iCs4GQma7IQ
But i recommend using realVNC 100x better and with Remote Desktop Mobile you can't use your PC while using it
VNC cost money but if you want a free version just send me a PM
Also if your using vista or Windows 7 its temp. looses your theme when you come back on thats why i use VNC less hassle
Hopes this help remember go to ppcgeeks for answers
try out logmein.com if you have WInMo 6.5 you need to switch the IE back to the old one, its still there you need an app called IEFix.
From IE only:
https://secure.logmein.com/US/pda/Default.asp
Anywayz I love LOGMEIN cuse I can connect to my web servers/home servers and pc's from the same list. and I can monitor when something is offline... RDP and VNC seem faster to navigate, RDP being the fastest, duh?
For those that use Orb to stream media to their phones, what is the maximum.speed you have been able to stream? Using the speed test, I get 450kb/s...is this due to my internet connection or the phone?
If you do not use orb...what other program do you use to connect to your pc?
I have a dynamic ip address, and have yet to find a way to connect via remote desktop...I have gotten answers, but they're like "just use this" with little to no explanation on how to go about connecting...
telegraph0000 said:
For those that use Orb to stream media to their phones, what is the maximum.speed you have been able to stream? Using the speed test, I get 450kb/s...is this due to my internet connection or the phone?
If you do not use hulu...what other program do you use to connect to your pc?
I have a dynamic ip address, and have yet to find a way to connect via remote desktop...I have gotten answers, but they're like "just use this" with little to no explanation on how to go about connecting...
Click to expand...
Click to collapse
Hey!
I use Orb very often and usually just set it to the standard 380 or whatever the highest speed is that can be selected on the webinterface. Never really bothered trying a faster setting because the increase in quality wasn't really noticable!
Referring to the dynamic issue problem you have: How is your internet connection managed? Do you use a router? And if yes, which one? The one I use supports DynDNS (www.dyndns.org): On the website, you create an account and a host domain (in the shape of: whatevernameyouwant.serveftp.net). Whenever you open that domain, DynDNS will forward you to your current IP if you configure your router to update the current IP at DynDNS whenever the IP changes! Works great! This way I can access my PC to do some remote desktoping whenever I'm not home by connecting to my domain!
You can take this whole thing one step further: Since you can only connect to your PC when it's awake, you usually have to leave the PC on, which kinda sucks. But there is a solution to this: You can let the PC go to sleep after a few minutes of not being used and wake it up again remotely by sending a WOL magic packet: http://www.dd-wrt.com/wiki/index.php/WOL (Don't worry, it sounds complicated at first, but it's not that difficult... What happens is this: You configure your network card to wake the PC whenever a certain kind of data package arrives. Now, when I'm not at home, I just send that WOL package to my DynDNS-Domain, which forwards it to the current IP of my router, which in turn sends it to my network card and voila: My PC wakes up and is usable!)
EDIT: Don't hesitate to ask me any questions you might be having! And you definitely will have to be patient! Since there are so many elements involved, it takes quite alot of trial and error until you get it working!
I tried to use orb but i couldn't get it work.
I use internet explorer on my hd, and when clicking on the video to watch windows media player opens and got an error saying the video cannot open or something like that.
Orb works using a PC, so I assume it is good configured.
What is the way to see a video using orb in my HD?
thanks
hectorzin said:
I tried to use orb but i couldn't get it work.
I use internet explorer on my hd, and when clicking on the video to watch windows media player opens and got an error saying the video cannot open or something like that.
Orb works using a PC, so I assume it is good configured.
What is the way to see a video using orb in my HD?
thanks
Click to expand...
Click to collapse
I use Opera Mini. When I click on a file, I'm asked if I want to save or open the file. I save it and open it using CorePlayer!
Maybe that's the issue: Are you using WMP? Maybe the windows media player doesn't support the streamed format! You could try changing the format in the settings of the Orb web interface!
I got to the part where I locate my routerv (using verizon fios' standard wireless router) and then an alphabetical list of programs and games comes up...yeah...stuck...
telegraph0000 said:
I got to the part where I locate my routerv (using verizon fios' standard wireless router) and then an alphabetical list of programs and games comes up...yeah...stuck...
Click to expand...
Click to collapse
I don't understand where you're stuck! Please tell me, what you did!
Okay...not necessarily stuck, just confused...page is asking me to choose a program to forward...
Screen with an alphabetized list of programs...which do I choose to connect to my pc?
Thank you once again...
telegraph0000 said:
Okay...not necessarily stuck, just confused...page is asking me to choose a program to forward...
Screen with an alphabetized list of programs...which do I choose to connect to my pc?
Thank you once again...
Click to expand...
Click to collapse
I'm still confused... Where is this list from? Are you trying to enable port forwarding in your router?
yes. this is from here:
http://portforward.com/
selected Actiontec MI-424-WR
telegraph0000 said:
yes. this is from here:
http://portforward.com/
selected Actiontec MI-424-WR
Click to expand...
Click to collapse
What are you trying to enable port forwarding for? For Orb? I don't think, you have to do anything for Orb to work!
EDIT: It seems I'm wrong, you might have to open a few ports... Check these articles: http://support.orb.com/kb/entry/118/ and http://support.orb.com/kb/entry/121/
Since I don't have your router, I have no clue how to manually set up port forwarding...
I guess my topic went another route when you mentioned the fact that you were able to connect your hd to your home pc through a dynamic ip address...
I am able to browse my pc through orb...
what I wanted to know.was how to be able to connect the HD through remote desktop. I created the account, but, unfortunately don't know what steps to fuether take threreafter to successfully create a remote desktop connection.
I see that remote desktop asks for "computer"--what ip address do I type in there?
got the user, password, and domain...
telegraph0000 said:
I guess my topic went another route when you mentioned the fact that you were able to connect your hd to your home pc through a dynamic ip address...
I am able to browse my pc through orb...
what I wanted to know.was how to be able to connect the HD through remote desktop. I created the account, but, unfortunately don't know what steps to fuether take threreafter to successfully create a remote desktop connection.
I see that remote desktop asks for "computer"--what ip address do I type in there?
got the user, password, and domain...
Click to expand...
Click to collapse
Ah! Good to know that you're trying something completely different... That makes helping you alot easier!
To be able to use your PC with dynamic IP from outside you have to use DynDNS as mentioned above! Go here (http://www.dyndns.com/) and create an account. Then, create a domain (for example: telegraph0000.serveftp.net). Then, make sure DynDNS gets updated, whenever your IP changes. There are different ways to implement this: If your router supports it, you can have your router do the updating for you. If it doesn't, you can download little apps that take care of that (DynDNS offers its own client: http://www.dyndns.com/support/clients/).
When DynDNS works, you can just enter your domain into the "computer" field of Remote Desktop!
To be able to use Remote Desktop, you have to forward the TCP port 3389 in your firewall.
Try this one..you can download the programm,and it does the job for you...works great here.
http://www.simpleportforwarding.com/
regards stef