Radio Stack Upgrade
Name of the Wallaby upgrade packages for the GSM firmware. Also called 'Programme B', because that's the name of the program which does the actual work.
See also: RUU
Related
I upgraded to 4.005
it was OK, everything worked
then I upgraded to the radio stack 4.21 from RSU4.15 O2
it was done OK, but my PPC do NOT see the network!
I tried to use bootloader (right button) to change the GSM band
from 900 to 1900 to 900/1800 and then I made soft-reset each time
but it was nothing.
network is unrecognized.
I'm ask for help in European network bands.
Can I degraded radio stack?
or can I find correctly radio stack for European networks?
backup do not work too
I have the backup of my previous PPC2002PC
I made via booloader to SD card
I tried to reinstall from the backup
everything was ok,
but after the reset the old OS try to upgrade the system
(I think it try to upgrade the radio stack, because the old OS I see)
then it display "Flash Failed" and going to the reset and again again again...
so, this way is not working.....
where to find a correct radio stack for European networks?
solution is here!!!!!!!
SOLUTION IS:
http://xda-developers.com/phpBB/viewtopic.php?t=2038&start=75
(page 4)
"For all of you having the same problem I have been having after upgrading to the O2 4.21 RSU here is what I have found makes the loading of the RSUpgrade files into the \windows directory work. You need to also copy the monitor_ul_bs.m0 and monitor_ul_bs.map files to the windows directory. Then when you execute the RSUpgrade.exe it works.
I posted this on another thread but thought it might help someone else here."
it made me 6.24 version! and it works now!!!!!!!!!!!!!!!
thanks barjohn, so many thanks!!!!!!!!!!!!!!
Hello,
where to find these two files?
Thanking you all
I have in my possession 2 XDA's at the moment. 1 with a USA T-Mobile radio version 6.18 and another with a UK O2 4.21 radio version. I'd like both to have the USA T-Mobile radio version 6.18.
Can someone explain or point me to how to copy the radio from 1 to another with an SD card?
Thanks in advance.
I know about the SD backup and restore through the bootloader. I have version 5.15 btw.
When I try to backup the GSM, and I assume this is the radio, it says "Please connect RS232 and run PC Monitor."
I don't know what this means and havn't found a reference to it yet on this site.
Just get the update from tmobile, and take the radio files out of the english directory and put them in /windows on your device, and flash the radio that way.
The TMobile update has 1 NBF file - NK.nbf The radio and the OS files aren't separated.
Once the T-Mobile OS update is finished, it launches the TMUpdate program that then tries to updates the Radio, but since the radio is at 4.21, it won't update the radio to 6.18 because of some internal version check.
johnp263
I have a similar problem with an O2 XDA.
OS update works fine. During GSM update the connection dropped.
After reboot I have a blank screen.
When I try to backup the GSM, and this is the radio, it says "Please connect RS232 and run PC Monitor."
I also don't know what this means.
:?
hi,
I've XDA I with RUU tmobile 4.0.1and RSU 4.21
I'm trying to return to original o2 rom
I've cooked from rom kitchen t-mobile 2003 ruu rom
When I launch exe file the pc give me this error:
"ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata"
and then
"ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
I've try to put nb1 file on sd card with image tool but my device has bootloader 5.17 and it doesn't work!
As I've installed t-mobile 4.01, the phone part of the device doesn't work (I've accidentaly swith to 1900, my sim card support only 900/1800 and here in italy there's no 1900 net)
Anyone knows other methods to load ruu from sd or can help me to resolve activesync error?
So whats the reason for you wanting to downgrade, is it because your radio is no longer working?
If thats the case you just need to up/downgrade your radio stack, on
that note I suggest you upgrade to the Qtek 1010 Radio Stack.
The Qtek 1010 Radio Stack Upgrade can be found at:
http://www.carrierdevices.com.au/downloads/asiapacific.htm
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
Note: Last time I checked the the above file came with both the ROM and Radio upgrade, so just use the one for the radio.
HTH
I had the same problems you did, without wanting to steal anyone's thunder, my thread here : http://xda-developers.com/forum/viewtopic.php?t=3860 deals with those issues and points you to the threads where easy answers can be found. I also operate off 900/1800 and have the info in that thread on how to change back from 900/1900 to 900/1800. Let us know if there's anything there that gets you stumped.
Don't play with RUU unless someone who knows what they're really talking about advises that you should for good reason.
Please help if SX 56 Siemens Upgarde can be used for Qtek 1010.I need to upgarde my Qtek 1010 to WM 2003
Thanks
yes the rom of one Wallaby can be used on any Wallaby device
but make sure you dont upgrade the radeio stack unless you use
the same gsm network that the radiostack from SX 56
which i'm pretty sure is 900/1900
if you dont use that gsm network you have to change
the exe file to zip and copy the nbf fil inside it out and update it
using xdatools
if you just use the selfflash exe then you'll end up with a xda which only work on the US gsm network
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
well not sure about the 56 Siemens upgrade
but with the tmobile upgrade i just renamed the extention
to zip and extracted the nbf file as i would have from any other
zip file
it were no problem at all
of cause i dont have a clue about how siemens handled their upgrade
SX56 Upgrade for Qtek 1010
Taimur said:
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
Click to expand...
Click to collapse
Taimur,
I did it for my Qtek 1010 (I live in the UAE). You are right, if you run the application SX56 Upgrade it will try to upgrade both RSU and RUU. I didn't want to upgrade Radio Stack. I used WinZip and extracted NK.NBF file, used Jeff's XDATOOLS (available somewhere on this forum) and transferred it to the SD Card. Then safely used Bootloader method to flash the ROM.
I am very very satisfied with the SX56 wm2003 upgrade. Except for the multiple reset bug, I have not come across any other problem, and I don't need to reset the device often. It's quite stable. It is the upgrade that I have stuck with for the longest
By the way, using Activesync method to flash ROM is very dangerous (Thanks to Windows), and I almost killed my Qtek while attempting it once! Thankfully with the help from ntabikha I managed to salvage it and never since used activesync to flash Rom.
I have a sx56 and I recently updated the rom to 2003 via the kitchen. I now would like to update my radio stack. I don't have an active sync cable so i need to do it through my sd card. Is this possible? Can someone tell me the best RS to use. I also need directions on how to go about downloading and installing the new radio stack. Also is there any way to upgrade to 2003se without active sync. My phone info is as follows:
unlocked AT&T sx 56 used on t-mobile
pw10b1
ROM 4.01.16 ENG
Radio version A.33.02
protocal version 1.3.3
thanks
Why do you want to upgrade your RadioStack? If it´s all working, i would stay....
Anyway, on the FTP are some RadioStacks, that are designed to run directly on your device.
# Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
# Copy the RSUpgrade.exe additional to the /windows/startup directory.
# Make an soft reset of your device.
Without ActiveSync, there is no possibility to upgrade to WM2003SE....
Stefan
Thanks for the quick reply. I don't get great signal strength on my phone and figured a new radiostack might help. But before I take chances upgrading, will a new radiostack help with signal strength?
It may help, but it must not.
You have to choose one of the 6.xx Radio Stacks.
If the upgrade fails, your phone might end as paper weight. That's the risc you have to handle with....
Stefan
DON'T TRY TO UPGRADE RADIO STACKS!!! DANGEROUS!!!
Guys, don't even think of it. Today I killed my wallaby. I had a radio 6.24.00 and I wasn't glad because of poor signal strength in places where other phones work great. I downloaded from xda ftp a radio stack upgrade soft to a version 6.25. Followed the instructions and started the procedure. On 60% it said do try again. I tryed and second time it stopped the procedure of upgrade at the very beginning. So, my phone doesn't work any more. I dont know what is that soft for if it kills the wallby phones. I wish I didn't do that.