Hello.
I have installed the IIWPO (theft protection) program manually (not in ROM) for testing purposes. After uninstall an error message appeared periodicaly. The error txt is "Cannot execute \windows\IIWPO_main.exe". Also I can not find any reference to this file in the registry (maybe faulty registry editor, PHM ?) or in the startup folder. Also tried searching in the file contents on entire device. No success. Please, help, this error message is pissing me off
might be late, but...
I had the same problem. It seems that the IIWPO_startup.exe writes an additional string somewhere (*.dll?) which forces the program to start. Btw. this means that it is not necessary to put it into the AutoStart directory, it should be enough to open it just one time after the installation.
Until someone finds the destination of this string there is a simple work around: just put a program file you always like to execute at startup (e.g. ClearTemp.exe) into your windows directory and rename it to IIWPO_main.exe. This will help :wink:
p.s. hexediting of the startup and main.exe does not solve the above mentioned problem but gives your iiwpo files and registry settings the desired personal touch to remain undiscovered
I uninstall my IIWPO easily. All you need is to reverse all the steps you followed during installation.
Remember to delete the line from config file in extended rom followed by a hard reset
Of course a HARD RESET will also solve the problem :lol:
I'm having this same problem....any solution yet??????
The reason for this is in the windows registry there is still a link to the program causing it to start. Use a program such as memaid which will find all dead links and delete them i had a problem similar to this with another program. Memaid solved it for me, hope it works for you also
The reason for this is in the windows registry there is still a link to the program causing it to start. Use a program such as memaid which will find all dead links and delete them i had a problem similar to this with another program. Memaid solved it for me, hope it works for you also
Thanks for the advice.........
unfortunately.............I tried memaid...........but it didn't solve the problem.....
anyone else?
Registry key location would be somewhere like HKLM to startup applications. Hard reset will definitely solve your problem.
Do check out www.cartystudios.com
I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?
I have had this installed and running fine.
I re-installed it in order to copy the cab files for the extended rom. I sucessfully copied the cab files but it failed to install on the universal.
I have removed it and tried re-installing several times, but each time it gets to putting the cab files on the device it fails.
Anyone else has theis probelm and found a way of fixing?
Thanks
Steve
Have you tried installing the "hey, don't worry about unsigned cab files" cab file? If not, read the thread on cooking roms with files (http://forum.xda-developers.com/viewtopic.php?t=36350) as it has a download for the aforementioned cab file.
I would really like to know how you got the cab files though... I've trawled my system and have been unable to find them so far - are they created in a temp location during install and then removed? Your help would be appreciated!
HNY!
If you installed the licensed version of SPB to your host pc, you can find the cab files under the program files\microsoft active sync directotory or just do a search of your program files directory for all *.cab to locate.
Ahhhh! Excellent, thanks! In order to filter results, I was searching for *spb*.cab so no wonder I couldn't find them! Many thanks and a non-denominational Happy New Year!
I am on WM6 now but back when I was on WM5, I remember there was a staging location for all .cab files when an application demanded to be installed on the main memory.
At the moment, I am trying to install the Windows Live Messenger beta to Storage Card but it fails when I try to do so. However when I attempt the same install to Main Memory it works fine.
I've forgotten now but in the past (WM5), the installation generates a .CAB file and puts it in a consistent location - from here, I should be able to move/run this file so as it install it on the Storage Card again...
As per this thread here, I also tried a search of My Device for all .CAB files created in the last 2 days but still nothing
Any ideas?
Thanks in advance,
BB.
Cab Temp location
\Application Data\Volatile\
you can safely delete everthing in this folder, its where cabs are expanded to be installed.
I hope this what you were looking for.
Big thanks RevAtB - that is EXACTLY what I was looking for!
Managed to free up some much-needed space in there too!
Thanks again
Hello people i am a nubbie at this and i been searching and not able to find anything. please help. i have the TP and im trying to us the Diamond TF3D Config. and its giving me an error. Somebody had told me that i have to delte something for it to work. i Have the most updated .Net. Please help. Links or cabs. or something will help a lot. thanks.
See this thread:
If you are having problems getting it to run and your reg is correct DELETE the tweaks.xml file in the programs folder. you find this in file explorer or what ever program you prefer, Look where you installed it to. Internal or storage card, for example storagecard/programs/diamondtf3d/ HERE is where you will find the tweaks file to delete. then retry running tf3d
Click to expand...
Click to collapse