I can not see what number is trying to connect! (I could!) I have only little picture of speaker phone when receive calls. I can see the numbers and names when for ex I miss a call and click on that speaker with exclamation mark
When SMS arrives everything is OK. It shows on the screen.
Do You know what is wrong??
Thanks a lot
Looks like the Caller ID application is failing. Have you tried a Hard reset?
(Sync and Backup first, just in case....)
Good Luck!
Related
I did a search and it seems this has popped up before but no1 had an answer.
I've had my MDA for months now, and only a few days ago did this start happening. This happens for all calls. Including ones i have saved on SIM and phone. I even have some ppl with specific ringtones assigned, the ringtones work, but no caller ID.
When i get an incoming call, i only see half the Incoming Call Notification Bubble.
I don't get the CALLER's ID. I get INCOMING CALL and the answer or ignore options.
Thats it.
I've searched in all the phone options i could think off, maybe thinking i accidentally turned off the ID setting. But for the life of me can't find it.
I really do not want to hard reset, as I've had my device setup perfectly the way i want it...Any help or guidance is much appreciated.
TIA
same problem here! pleeeeeeeeeeease help us!
I've suspected of currupt photo files 'cause me tom tom navigator lost iz settings at the same time. So i've copied the photos again from the PC and didn't fix it. When I try to add a pic to a contact, the program just freezes when I hit "preview".
Hi there.
I'm still messing with some S2U2 issues... I installed S2U2 but I don't like it receives callings. So I uninstalled it. The problem is that the phone doesn't show any information when a call is received. I gotta press the left desktop button to watch that information (you know, caller ID, phone, name, buttons as Receive, Speaker, etc.) What can I do?? is there a way to restore the default system receiving info?
Thanks!
You should read the instructions carefully in S2U2. It even shows a warning that if you don't reset the device after setting the caller id back, you will lose the system caller ID. Try installing S2U2 again, turn the caller ID off in there let it soft-reset the device and see if that resolves your problem. HTH.
Oh God! It worked now! That was the deal: turning the CallerID off before uninstallation...
Thanks!
Whenever I go into call history, by whatever means, it seems that I always get a filtered call list.
I'm used to this being the case when I view missed calls, from my previous WM devices, but when I enter call history from the dialler screen I should get a full list, but I get either outgoing calls only, or incoming calls only. I can't see any options to change this behaviour. (I know I can select the filter in the right softkey menu, but it's a pain to do this every time.)
Ideally I'd like to never, ever, see a filtered list.
Does anyone know of any solutions to this?
Is no-one else having this problem?
Resco Contact Manager
Install Resco Contact Manager.
http://www.resco.net/pocketpc/contactmanager
Yes, I too have this problem and would like a solution...
jrg1967 said:
Yes, I too have this problem and would like a solution...
Click to expand...
Click to collapse
Me as well. it is very very very annoying. When I click on it it goes straight to outgoing calls. I will see if I can find something in the registry...
i have the same problem and it drives me really crazy! Has somebody find a solution meanwhile? Maybe a registry fix or any other solution?
many thanks in advance,
Hakamuri
Here's my scenario,
I'm receiving calls from 3 people that are annoying, I'm not looking for to block these people, but looking an app that can REDIRECT these SELECTED CALLERS to the number of my CHOOSING.
please help me find an app that forwards calls (THAT DOES NOT TAMPER WITH VOICEMAIL)
Thanx in adv.
I hear that phoneAlarm does this from pocketMax.
http://www.pocketmax.net
just tried it, and did find anything regarding call forwarding.
anyone else????
This won't help with your scenario, but might be useful for future reference.
Google Voice offers this functionality by default. You can send those callers to another number, or straight to voice-mail, or block them entirely if you choose.
Unfortunately, I don't know of any WinMo apps that will do that.
Not sure if MagiCall will help you. You can set up custom rules for each number.
Worked great when I was getting annoying calls.
I normally was using Magi call, but have it under hang up and drop. Problem is that it hangs up a second later (they can still hear my background and notice that it the call is being hanged up for the 1 second).
I have tried about 2-3 apps that they are suppose to block the call, instead it send s them to voice mail (I don't want them to have access to my voice mail) or does hang up immediately. Only if there is a TRUE CALL BLOCKER is would consider it.
I now focusing in finding a app that forwards these selected callers to any number of my choosing.
There has to be an app like this, someone hopefully comes through with that answer.
Extreme184X said:
just tried it, and did find anything regarding call forwarding.
anyone else????
Click to expand...
Click to collapse
I'm looking for the same thing and PhoneAlarm Pro does support this feature from what I've read. I downloaded the Pro version and installed it. But after restart, it will get stuck on the main screen and nothing else will show. I waited for a while to see if it will load but nothing ever happened and I kept restarting over and over. I finally ended up doing a hard reset. I'm running on the Leo Cell Evo v5 rom tmobile and I don't know if it has something to do with it, but I don't feel like flashing to another rom to see if it works for me so I'll just leave it alone and let someone else figure it out.
Using G975F Exynos, every now and then I am getting Call Not Sent error when I am trying to make a call. I can't pin point specifics that happen right before that, other than I think that the phone is playing something in the background (stream) or something like that. I try to dial from an address book and immediately the call drops and the above error shows up at the bottom. I may see (again - not scientific, but I think I noticed that occasionally) a difference between dialing from favorite contact - that is pressing the green phone icon in a favorite contact right at the top when you open the contact - vs dialing from the contact when you scroll down to see all the contact's numbers (does it make sense?!).
I would like to emphasize:
1. I don't always get this error, hence why I can't really put a finger as to what transpires right before that.
2.. It happens also when I manually dial, not just from address book.
As spoon as this happens, I see a white icon on the top that says something to the extent of "Voice is working in the background". It lasts a few seconds then disappears. Sometimes I am able to dial right after it disappears, other times I need to wait a few minutes until the phone is "ready" to make the call (no indication of when this happens, it's just a simply trial and error).
Anyone else experience this?
Thanks.
No one else has this issue?!
This is what I see in Voice when I get Call Not Sent. It can lasts from seconds to over a minute where I cannot make any call.
No one?!
sbi1 said:
No one?!
Click to expand...
Click to collapse
Looks like it's a new issue nobody had before i'll put in my 10 cents and say that your app is somehow tied to something else and hence (Busy) and unable to dial i think you're on the right track. I would go into your list of apps i find out which app has the ability to make calls like Viber, fb messenger, skype and disable one by one to find out which one is doing it. Look for that icon you see in that screenshot you posted it doesn't look like a default dialer app icon to me.
EdinM30 said:
Looks like it's a new issue nobody had before i'll put in my 10 cents and say that your app is somehow tied to something else and hence (Busy) and unable to dial i think you're on the right track. I would go into your list of apps i find out which app has the ability to make calls like Viber, fb messenger, skype and disable one by one to find out which one is doing it. Look for that icon you see in that screenshot you posted it doesn't look like a default dialer app icon to me.
Click to expand...
Click to collapse
It looks to me as the Google Voice app, but I don't necessarily call using GV when I am getting this error (meaning - the last call before starting getting Call Not Sent is not necessarily made using GV but rather the standard, mobile dialer).
sbi1 said:
It looks to me as the Google Voice app, but I don't necessarily call using GV when I am getting this error (meaning - the last call before starting getting Call Not Sent is not necessarily made using GV but rather the standard, mobile dialer).
Click to expand...
Click to collapse
Some voice dialers do have the option to set as default it might be causing a conflict disable it or uninstall it and see if the issue persists.
So it has been determined that this issue is happening when I try to dial when a BT headset is connected to the phone. It happens with two different BT headsets (different manufacturer and different types), and it may happen in the first call after turning the BT on or in a repeat call, either to the same number or a different number.
No one else with G975F or other S10+ is experiencing this issue?
Anyone? Is no one else having this issue of CALL NOT SENT when re-dialing with a BT headset connected?
Bump
Still looking for solution. I can't my phone is the only one that refuses to dial/redial when a BT is connected. Anyone?