ok, i'm as n00b as they come when it comes to this. Can someone tell me what firmware, ROM, OS upgrades I need/should get. It's the AT&T version of the phone and I want to make all the neccesary upgrades before I start using it. Thank you soooooo much, John
If it is brand new you have the most current stuff. Go to www.my-siemens.com and you can download the a.20.17 update if you dont have it on your device.
If you just got it you would be CRAZY to screw with it. Especially if you haven't read EVERY SINGLE POST here pertaining to the dangers of flashing.
If you still want to noob it and screw around, invest in a card reader, make a backup of your rom, and be prepared to have a shiny silver paperweight just in case. DO NOT use any .exe upgrade packages that are not from Siemens.
yeah... i kinda wanted the new OS 2003 though
i know i was looking before i got my phone and i saw a package that was released by AT&T wireless, specifically for this model of phone, and now i can't remember where the hell i saw it.
also, the phone is locked... i thought that the rogers US and rogers at&t canada networks were identical. any advice/suggestions on that?!?
Thanks for your reply by the way
Most phones come with the SimCard locked for a particular carrier. Since you are most likely not going to switch for awhile, this is no big deal. If you do ever decide to switch to a different carrier, you can break the sim lock using a utility located on this site. I WOULD NOT do this until you are sure you want to switch carriers though. Otherwise it is a waste and potentially damaging to your unit
actually, i cannot use the phone right now. I purchased it off ebay and it is locked for the US AT&T, however, i'm in Canada using the AT&T service up here. I need to unlock it.
Should i buy the cable, upgrade the ROM? help?!
chewan said:
Should i buy the cable, upgrade the ROM? help?!
Click to expand...
Click to collapse
No need to panic...
Just download and run this
Then if you want to upgrade to WM2003, simply visit here and cook a self-extracting exe based on 4.00.11 (just my personal suggestion, tastes differ).
(Yup, we added 4.00.11 and 4.00.16 to the kitchen menu)
Any obvious benefits of .11 or .16 over .05 or .10?
holy ****... everyone here has been so damn helpful so far. thank you so much...
alright, so far so good... i just finished upgrading to the xda developers rom and it unlocked the phone for me
this would be the ultimate now...
i want a ROM with just the Mobile 2003 factory settings and nothing else installed. This ROM has a bunch of crap on it that I wouldn't know how to use if my life depended on it. I just want the new Mobile 2003. What is the best way to do this?
Do I just cook one up with only the 4.00.11 ENG WM2003 selected... Is there a better way... Thank you so much again, John
Just take the .16 ROM and deselect all the progs you don't want. Then you will have the latest ROM as it comes from Tmobile. Just a few cosmetic changes in the cooked rom.
is it recommended to use the t-mobile ROM despite the fact that i'm using a rogers at&t phone?
Make battery warning adjustable
Fix 'multiple resets make device slow' bug (WM2003 only)
Remove 'stk.lnk' from Startup folder (WM2003 only)
also which of these do you recommend installing?
The rom version doesnt make a difference. You will not get the "G" which lets you know you can make an internet connection with any of the roms above 4.00.05 though.
Install all of stuff you mentioned.
so last and FINAAAAAAAAAAL question...
4.00.05 ENG WM2003 (3906 kB available)
4.00.10 ENG T-Mobile US (2119 kB available)
4.00.11 ENG WM2003 (3906 kB available)
4.00.16 ENG T-Mobile US (2119 kB available)
if you were picking? and why? thank you so very much
That is personal opinion. If you want only the basic tmobile install you can go with any of them and just deselect the other programs. Keep in mind that having these programs doesn't hurt you for the don't take up any memory on your device until you run them. That is the beauty of having the in ROM not RAM. Just be careful what you play with. The idea is that the higher the number, the later the release, so the more stable it may be. Again this is just an idea.
chewan said:
so last and FINAAAAAAAAAAL question...
Click to expand...
Click to collapse
I would personally pick 4.00.11 unless you're on US T-Mobile, or happen to need the PDF and/or Presentation Viewer.
I would suggest you to take the 4.00.11 if you are not on the T-mobile.
Btw, this 4.00.11 is tested to fit the AWS along with the A20.10 I think....
Hi, I am absolutely new to this, I am about to take delivery of an MDA Pro on T-Mobile, and i am wondering can i install say a jasjar or O2 rom image to get round some of the problems experienced with T-Mobiles roms?
I hope someone can help
Cheers in advance
Jonathan
yes, you can arbitrarily mix Windows Mobile core, Radio stack, and Extended ROM version.
Thank you and a further Question
By using the say Imate rom, will that eliminate the problems experienced with the t-mobile rom
Cheers and thank you
Jonathan
what problems are you having
i updated a magiacn that was ok and it totally fired it beyone repair
jesus, what did you do? You've got me a little worried now since i'm looking into cooking roms or trying some other device roms on my sx66. I was under the impression that it was relatively safe if your careful.
what did you do to fry it?
i simply downloaded a rom update off the phone porivders website,ran it and my lil magican was no more lol
this is the Universal forum. Of course if you burn a ROM for a different device then it will make poof.
Back to the question - what were your problems with the T-Mobile ROM? Were they T-Mobile issues or Microsoft issues? Or radio stack?
Where can you get T-Mobile roms from other than the ones on the WIKI (which is missing links). Do T-Mobile UK publish them, as I could not see any sensible links when I was logged in.
Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
In the section called wizard upgrading is a sticky by Dr. P...in it it explains how to unlock your device. Read it, then read it again, follow the directions explicitly.
As for rom...I have a Tmo MDA running a WM6 custon rom...Jaguar 3.1
Each rom is different, it depends on what you want in a rom. If you want bells and whistles go with a TNT rom. If you want a zero calorie rom go with a Core rom and customize as you need by installing 3rd party apps. If you want something in between, go with Jaguar or a Faria...there are so many amazing chef's at work here at xda, that in truth, you just gotta try each kitchen out until you find the one that meets your tastes. Be warned...you may turn into a flashing junkie and need to join the xda 12-step program!!!
Ok, thanks. You've helped me a lot. I think ill go with the faria or jaguar, I like the sound of them, but ill look up more info on them first. Thanks again.
waleed786 said:
Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
Click to expand...
Click to collapse
It all depends on your taste...i always like to cook my own ROM...pick the one you like, dump and add packages you like and enjoy...but READ (I mean READ...) wiki and stickies before you flash...dont just flash anything and brick your device...
PS: Stick with OS version ending .318 for better wifi connections
Ok, thanks. I should be getting my MDA tomorrow (thursday) so Ill probably start installing custom ROM's on friday, because I want to get to know the MDA a little bit before I install customs ROM's. Also, how can I check if it's a G3 or G4? I know it has something to do with the numbers that show up when the device is turned on, but I'm not sure, can anyone help? Also, hat do u mean "add packages" can I customize my custom ROM however I want? I can add whatever apps I want on the ROM? Also, are all custom ROM's windows mobile 6? are there such things as windows mobile 5 custom ROM's? its not that I want it, just curious. Is there a such thing as jaguar.318? (you said .318 has better wifi)
waleed786 said:
Ok, thanks. I should be getting my MDA tomorrow (thursday) so Ill probably start installing custom ROM's on friday, because I want to get to know the MDA a little bit before I install customs ROM's. Also, how can I check if it's a G3 or G4? I know it has something to do with the numbers that show up when the device is turned on, but I'm not sure, can anyone help? Also, hat do u mean "add packages" can I customize my custom ROM however I want? I can add whatever apps I want on the ROM? Also, are all custom ROM's windows mobile 6? are there such things as windows mobile 5 custom ROM's? its not that I want it, just curious. Is there a such thing as jaguar.318? (you said .318 has better wifi)
Click to expand...
Click to collapse
All you need is in here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard. Jaguar is .318 OS, if you flash that you should be good to go...read wiki before you do anything with your MDA. Good luck.
waleed786 said:
Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
Click to expand...
Click to collapse
Hmmm, Take my advise,as you are getting a new device,it wud probably will be with wm5 T-Mobile Rom.why don't you just use it for sometimes,enjoy the new device,get to know all the features and applications and really get to know your device and when you are fully comfortable then go for an upgrade to wm6 version Rom. In the meanwhile, READ 'n' READ all about CID unlocking and upgrading,so that when you are actually going to do it,you have the whole procedure done successfully and effortless
Secondly, it's very very important to know the correct DOC chip version on your device ( G3 or G4) cuz both the devices have all together different method for upgrading,if you do a G3 method to unlock or upgrade to a G4 device,it'll "Brick" the phone,so first determine the version of the device. Download the WST Tool and install,run it and check the report it generates to verify the DOC chip version,whether it's a G3 or G4 device.
Good luck
Yeah, your right, I got my MDA yesterday, and I'm pretty happy with wm5 right now. Ill put a custom ROM on later, no point in risking a birck already, but I still want to CID unlock it now, so I don't have to do it later. Thanks for your advice. I found a lot of things to on the net make a wm5 look like wm6, i got a theme, and media player skin. Do you know any other ways I can make my wm5 look like wm6? Icons? buttons? sounds? is there anything like this on this website? i'm going to check anyways.
Search in the xda wizard forums. A while back someone posted WM^ themes, ringtones, icons etc...if it isn't in the wizard section, then I saw it in the general topics section. Sorry I cannot remember which, but I DO remember seeing it posted here at xda, so just search WM6 themes.
What do you guys think of this rom: http://forum.xda-developers.com/showthread.php?t=310864 is it a .318? does it have good wifi? please give me a short review or something
waleed786 said:
What do you guys think of this rom: http://forum.xda-developers.com/showthread.php?t=310864 is it a .318? does it have good wifi? please give me a short review or something
Click to expand...
Click to collapse
Well,this one is an old cooked Rom on an older Base Rom,there are at present many latest cooked custom Roms on newer Base Roms,I'll suggest you to consider those,it wud be more beneficial and enjoyable with better and advanced features.Like TNT 1437,TNT 1933,NBD 9.2,they all are excellent build Roms.
You can check out all the latest wm6 Roms on 'Wizard Mobile 6' forum
ok thanks, also i used the lokiwiz program to CID unlock wizard, but I am not sure if it worked, is there any way to tell if my mda is really CID unlocked??? Also, can I upgrade the ROM witgh Vitsa? it didnt work, then I tried the activesync driver, I found the instructions on this website, bit it still didn't work, i followed all directions, and tried 10 times. I try to update, but right when it says verifying device info, i get the message "ROMupdateutility MFC Application has stopped working" PLEASE HELP, ANYONE.....
waleed786 said:
ok thanks, also i used the lokiwiz program to CID unlock wizard, but I am not sure if it worked, is there any way to tell if my mda is really CID unlocked??? Also, can I upgrade the ROM witgh Vitsa? it didnt work, then I tried the activesync driver, I found the instructions on this website, bit it still didn't work, i followed all directions, and tried 10 times. I try to update, but right when it says verifying device info, i get the message "ROMupdateutility MFC Application has stopped working" PLEASE HELP, ANYONE.....
Click to expand...
Click to collapse
To verify the CID lock/unlock status,download the WST tool and run,check the button "CID Action" written on it,this will give the report to verify if you device is CID locked or unlocked.
Secondly,don't use Win Vista as it has many problems yet.Flashing is always easy and recommended with WinXP SP2,ok
Cheers
zabardast_1 said:
Well,this one is an old cooked Rom on an older Base Rom,there are at present many latest cooked custom Roms on newer Base Roms,I'll suggest you to consider those,it wud be more beneficial and enjoyable with better and advanced features.Like TNT 1437,TNT 1933,NBD 9.2,they all are excellent build Roms.
You can check out all the latest wm6 Roms on 'Wizard Mobile 6' forum
Click to expand...
Click to collapse
Not always an old OS is bad
Maybe you'd like to give my ROM a go
ok thanks for all your help. I guess ill have to go to the library to put a custom ROM on, the have xp there. What is your ROM? Can you tell me more about it?
ok thanks for all ur help. I go to the library to out a ROM on it, they have xp there. What is you ROM dferreira? can you tell me more about it? is it wm6,? is it the one in your signature? I kind of like that one, even though its not wm6, you have a good reason of keeping it at wm5. Another thing is can I use shelltool to put a custom ROM on my mda? does it work with every ROM? if it does, why doesn't everyone use it? what's the use of CID-unlocking it when shelltool is easier and faster? is there a catch?
waleed786 said:
What is you ROM dferreira? can you tell me more about it? is it wm6,? is it the one in your signature? I kind of like that one, even though its not wm6, you have a good reason of keeping it at wm5. Another thing is can I use shelltool to put a custom ROM on my mda? does it work with every ROM? if it does, why doesn't everyone use it? what's the use of CID-unlocking it when shelltool is easier and faster? is there a catch?
Click to expand...
Click to collapse
My ROM is WM5, based on the old AKU 2.3 (rev 4 is, rev 5 which is gonna be released soon will be the latest WM5 OS build). You should not use shelltools to change to my ROM, since I've got some fixes/updates done by extendedRom, which shelltools doesn't update! Also, WM5SE is G3/G4 safe, so you can use SoftSPL or HardSPL to flash it so its safe for every Wizard PDA. Why doesn't everyone use it? Its the freedom of choise, everyone is free to use whatever ROM satisfy his/her needs. ShellTools takes about 30 minutes to flash. A CID Unlocked device can be flashed using the official RUU upgrading program, that takes about 6 minutes... also its safer.
Just make sure you have read all the stickies on WIzard Upgrading forums, before ever flashing!
You said you took out windows live, where can I download it if I want to put it back on?
IMPORTANT!!!
one last question, do I need to downgrade my SPL to CID unlock my phone? I have a G3 T-mobile MDA runnig the latest t-mobile 2.26 ROM. How can I downgrade to CID unlock my phone? LET ME KNOW ASAP, I'm in a rush....thanks!
YES !
CID unlocking is only possible through 'lokiwiz02b' Tool and it only works in IPL/SPL 1.xx,so to unlock you'll have to downgrade to IPL/SPL 1.xx.To CID unlock read this Sticky :-
http://forum.xda-developers.com/showthread.php?t=263116
Good luck
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
use a gold card in sd slot or just install HSPL first
wtf is a gold card? i keep seeing people refer to it but never what it is, i imagine its a sim card with a toffee penny wrapper stuck to it lol
http://forum.xda-developers.com/showthread.php?t=591314
Basicly its a sd card with its unique serial number run though some software but as its no longer free just use hspl if you dont have a goldcard.
Forget about the goldcard, you don't need one so long as you have a copy of the original rom available, which you do. Hunt it out in the official roms forum. First post, first link, 1.43 section, its listed there. Thats your backup, then instal hspl and you can flash what you like.
Your HD2 is locked to o2 (UK) ROMs only so you cant put any of the official HTC ROMs or any of the custom ROMs from the "HD2 ROM Delvelopment" forum
http://forum.xda-developers.com/forumdisplay.php?f=534
because of this your always be running out of date software as the phone operators are always so slow at releasing updates if they do at all.
BUT if you download HSPL from the above forum thread "[HSPL] HowTo flash everything"
http://forum.xda-developers.com/showthread.php?t=611433
and install it to your phone your then be able to put on any ROM you like. Don't worry its near impossible to muck anything up and you can always put the phone back to its original rom, just do a little reading if your still not sure.
Great Guys! HSPL helped!!! I've upgraded...shame I can't manage to download Rom 1.66 as it always crashes and the download in general is sooo slow (not the internet issue)...but maybe with a bit of patience I'll get it at the end!
Cheers once again!!!
essensial said:
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
Click to expand...
Click to collapse
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
shutty2k3 said:
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
Click to expand...
Click to collapse
all you o2 guys that cant down load have been able to get 1.66 from htc's site for months now this rom is purley for the forgoton few (like me) who got the phone as o2 launched and locked down (no wifi router etc) I ran this rom for a day and it nice and snappy fast but its still not wm 6.5.3 so i am back on touch-x again now the 2.07 radio in the o2 rom was quite ok in my area when I used it a few months ago but the 2.10 in my opionion is a match for recption with better battery life just my 2 cents hope it may help some of you
What about Virgin Mobile? Will they get a Rom Upgrqade???? they seems to have been left out of the loop even though they were the first (technically second) carrier of the phone.