Original O2 GER. ROM needed! missed O2 Autokonfiguration - MDA II, XDA II, 2060 General

Hello,
i make the I-mate & caller ID picture patch on my German O2 XDAII.
After a hardreset I miss my O2 Programms and O2 Autokonfiguration. What can i do??

I think You have to install the provider files in the EXTENDED_ROM an do a hard Reset then all O2 configurations will be done.
Ich denke Du mußt die Providerspezifischen Daten im EXTENDED_ROM installieren und einen Hard Reset machen. Dann werden alle O2 einstellungen wieder vorgenommen.

Related

Windows mobile 2003 for german XDA I...

Some days ago I updated my XDA I to the current german ROM Version avaiable at O2online.de (it's 3.19.01 GER with radio v4.21), because I hoped that wmodem is included at that version. Unfortunately it wasn't, although it is included at an english version with a minor version number. As there were also some other disappointing things, I decided to write a letter to O2. Here's a part of their answer:
Das eigentliche Anliegen Ihres Schreibens ist die Modemfunktionalitaet des xda I. Die Ausstattung des Geraetes in England und Deutschland ergab sich aus den Ergebnissen diverser Umfragen. Diese zeigten eindeutig, dass eine Modemfunktionalitaet in Deutschland von den zukuenftigen Nutzern nicht priorisiert wurde. Im Verlauf der Zeit hat sich allerdings gezeigt, dassŸ auch diese Funktion genutzt wird. Daher verfuegt der xda II ueber die Modemfunktionalitaet. Ein Nachruesten des xda I ist leider nicht moeglich, da es zusaetzliche Hardwarekomponenten erfordern wuerde.
Der Service fuer den xda I wird natuerlich weitergefuehrt. Verschiedene Updates haben die Funktionalitaet bereits verbessert. Ein Update auf WIN CE 2003 ist ebenfalls noch in Planung. Evtl. wird es dann auch moeglich sein, den xda I als Modem zu nutzen.
Die Fax-Funktionalitaet wird wohl auch in naher Zukunft leider nicht gegeben sein. Bedingt durch bestimmte Netzeigenschaften (in unserem Falle die Homezone), funktioniert es nicht. Bisher ist es leider noch nicht gelungen, dieses Problem zu loesen.
Click to expand...
Click to collapse
I'll try to translate it into english:
As a poll in germany showed, that most users didn't ask for a modem feature at the XDA I (in opposite to british polls), it is not included at the XDA I. But by and by we got to know that such a feature is used and therefore now it is included at the XDA II. An upgrade for the XDA I is not possible as there are some hardware components missing.
The service for the XDA I will be continued as a matter of course. There have already been some upgrades and also an upgrade to WIN CE 2003 is still planned. Possibly one will therefore be able to use the XDA I as a modem.
A fax functionality will be not possible in a near future. It doesn't work due to some properties of the network (in that case it's the homezone-funktionality). By now it was not possible to solve that problem.
Click to expand...
Click to collapse
It's quite interesting, that some necessary hardware components are not necessary any more just by doing a software upgrade...
Try this....
The T-Mobile Version of such an update is here:
www.mathiaspohl.de/mda
This version includes the wmodem file.
Enjoy !
regards, Koponet
I currently have the Special edition rom for my T-mobile MDA (XDA-1), I have been using the WMODEM via a serial cable to my laptop for a long time, but now I would like to upgrade the firmware to PPC2003 from T-Mobile website, does the download from http://www.mathiaspohl.de/mda include WMODEm for PPC2003?
lzxing said:
I currently have the Special edition rom for my T-mobile MDA (XDA-1), I have been using the WMODEM via a serial cable to my laptop for a long time, but now I would like to upgrade the firmware to PPC2003 from T-Mobile website, does the download from http://www.mathiaspohl.de/mda include WMODEm for PPC2003?
Click to expand...
Click to collapse
Yes. This ROMs includeeds the wmodem application.
But it´s a German ROM. So all is in German and nothing in english. It´s not possible to switch the language....
Stefan

Bootloader updaten

Hallo,
ich suche mich langsam verrückt und finde keine Möglichkeit meinen MDA Vario 2 von T-Mobile A upzudaten.
ich habe hier die Vers.
HERM 300
IPL 1.01
SPL 1.4
und schaffe es nicht mittels PC und SD Karte upzudaten
beim PC bekomme ich den Fehler 260 und von der 2GB in FAT32 SD-Karte mag er mir des umbenannte File auch nicht starten - es erschein nur der Tricolor-Screen und Serial-Meldung - wenn ich es mit dem PC verbinde erscheint dann USB aber er gibt mir kein Menü zum Installieren.
kann mir hier jemand bitte helfen
danke
Bani
Sorry, I have to write it in english
I am searching a possibility to update my MDA Vario 2 von T-Mobile A.
I have here
HERM 300
IPL 1.01
SPL 1.4
I could not update my MDA vari 2 from T-Mobile A
from PC I get error 260 and from the 2GB in FAT32 SD-Card I also couldn´t start the renamed file- it appeares only the Tricolor-Screen and Serial-Meldung - and when I connect to the PC USB but I got no menu for installation
could someone help me please
thanks
Bani
Bani_777 said:
Sorry, I have to write it in english
I am searching a possibility to update my MDA Vario 2 von T-Mobile A.
I have here
HERM 300
IPL 1.01
SPL 1.4
I could not update my MDA vari 2 from T-Mobile A
from PC I get error 260 and from the 2GB in FAT32 SD-Card I also couldn´t start the renamed file- it appeares only the Tricolor-Screen and Serial-Meldung - and when I connect to the PC USB but I got no menu for installation
could someone help me please
thanks
Bani
Click to expand...
Click to collapse
What file are you using?
look HERE for help.
thanks for your help
I tried the radio on this site:
http://www.t-mobile.at/privat/servi.../Software/MDA_Vario_Pro_Compact_II/index.html
(for T-Mobile it is only allowed to use this one, isn´t it?)
I think it is Version 1.27
Well, a lot of things could cause the 260 error. Check out the MrVanx guides. It could be Vista, it could be your version of ActiveSync...
You actually can use non-TMobile ROMs. You just need to use the latest CustomRUU. Find any post from olipro and there is a link in his signature to take you to the right place to download it. Or, a WM6 ROM download will probably be packaged with a working RUU (updater) that will work with a non-TMobile ROM.
Thanks to Olipro and the other developers here, there are not many limits to what you can do!

Can one share t-mobile.at WM5 Rom?

Hi,
Could one of you share a t-mobile.at WM5 with me please?
I have a MDA Compact III with built in GPS and want to use the original WM5 T-Mobile.at (Austria) ROM (t-mobile.at say's, they dont have that anymore ). So does someone have a link or actually the ROM itself for me?
If not possible, do you think I can use an HTC-ARTEMIS ROM (has a Wifi, mine doesn't, ...)? Which (link) do you recomend? There are many - so I am confused
I have ongoing problems with WM6 while using GPS, so I desided to switch back to WM5 as quick as possible
Thank you very much!
Hille
t-mobile rom
Hi, zuerst auf Deutsch!
GPS lauft unter WM6, sogar besser, ich habe nen MDA III compagt mit nem WM6 und Blue/black rom... geht superm mann muss nur die Vermindung zu t-mobile neu einfügen unter verbindungen.. macht jetzt edge, was er früher nicht machte...

Charmer hangs in Bootloader

Hello,
can you help me please?
the charmer don't boot. It hangs at the bootscreen. at usb mode activesync dosent find the phone.
it shows.
ipl 2.06
spl 2.06.0000
gms 02.19.21
os 4.0.0.0
i want to flash the original firmware. how can i do?
greetings markus
Same problem pls an answer
Enter the bootloader mode and run official rom upgrade.
Bootloader Menu...
I can't make an update with the original firmware software. This Programm tolled me i must make a AktiveSync connetion. In Bootloader (CAM POWER Button) My computer find any USB device but activesync doesn't make a sync connection. Thats my problem. What can i do?
Greetings, Markus
Active sync wont make a connection when your in bootloader mode. The update program will work, it doesnt need active sync connection.
can you give me a link to the update?
I found it self. im so lucky because it do. sorry for my english. @ datenzwerg http://downloads.t-mobile.de/redire...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip damit sollte es funktionieren auch wenn er eine sync verbindung haben will die brauch er aber nicht ein fach ins bootmenu und da dann usb an stecken und am computer starten ;-) bei mir hats geklappt
hoffe h mal das es funzt...
ich werde es probieren mehr als kaputt kann es eh net werden. hab halt a bisserl CID Panik da ich eine TMOBILE Austria sperre habe.
werde berichten wie es gegangen ist.
mfg markus
wrong ventor id
the german update doesn't run. the programm tells me wrong ventor id. i will dry the austrian one.
http://www.t-mobile.at/privat/servi...ftware/_files/MDA_compactII_AKU2_0_Update.exe
greetings, markus
Solved the Problem
Hello,
i've solved the problem.
The German 3.3 Version can't be install by ventor check.
The Austria 2.0 Version can't be install by Active Sync check.
I used the ROM form The Austrian Update and the Software from the
German update Pack.
My Charmer have a useable ROM!!!
Greetings Markus
aaaaaaaaaaaaaaaaaaaaaaaaaaaa
irgendwie klappt dat bei mir nich so recht
könnt ihr mir genau beschreiben was ich zu machen hab
ich hab das selbe problem mda2 Tmobile nach einem flash versuch geht es aus dem boot nicht raus usw
gibt es kein affengriff oder sowat damit er von alleine hoch bootet
thx
mfg
srox
dank an shayd
ua ich habs dank an shayd
Originally Posted by shayd
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Hallo!
I had the same problem with the vendor Id and i tried to flash the austrian t-mob version ! It worked but at about 40% it saied error and now the bootloader goes on and within 5 sec it wents of! SO i cannot try to flash another time!
What can i do?

-Search WM 6 for MDA

Sorry my english is bad, i read in german.
Hi User,
ich habe einen MDA PM10A compact bekommen.
Meine Frage, kann ich WM 6 auf meinen MDA ziehen, wenn ja wo bekomme ich das passende Rom her und wie ziehe ich dieses drauf. Es wäre schön wenn mir jemand helfen könnte, such schon seit Tagen, nach einer Lösung.
Hier die Daten meines MDAs:
T-Mobil MDA PM10A
Windows Mobil 2003 2.Ausgabe
Version 4.21.1088
Build 15159.2.6.4
Rom 1.13.01 GER
CPU Intel PXA272
Vielleicht kann jemand mir helfen...Bitte...
Hi user,
I have got a MDA PM10A compakt.
My question, I can pull windows mobile 6 on my MDA if so where I get suitable Rome here and how I pull this. It would be nice if to me somebody could help, look already for days, for a solution.
Here the data of my MDAs:
T-Mobil MDA PM10A
Windows Mobile in 2003 2nd issue
Version 4/21/1088
Build 15159/2/6/4
Rome 1.13.01 GER
CPU Intel PXA272
Maybe somebody can help me... Please..
Arundian said:
Hi user,
I have got a MDA PM10A compakt.
My question, I can pull windows mobile 6 on my MDA if so where I get suitable Rome here and how I pull this. It would be nice if to me somebody could help, look already for days, for a solution.
Here the data of my MDAs:
T-Mobil MDA PM10A
Windows Mobile in 2003 2nd issue
Version 4/21/1088
Build 15159/2/6/4
Rome 1.13.01 GER
CPU Intel PXA272
Maybe somebody can help me... Please..
Click to expand...
Click to collapse
Nope, no chance to find a running German-WM6 for MDA Compact. You can use one of Cotullas english roms for the Magician, but be careful to choose the right one for your device.
Otherwise you can try to use the search button (or google) for : 'Home.1.01WM5.Installer' and 'home.ppc2003' to get a feeling like the OS with finger friendly touch.
Look for it in the alpine forum, as this device is (and will be) still stuck in WM2003SE.
Good Luck and nice to see you here. On problems feel free to PM me, as all these forums here are nearly dead.
vielen Dank...Thanks.
Habe bereits eine Rom mit WM6 gefunden und T-Online schreibt, WM6.1 geht bei dem MDA Compact. Nun weiß ich nicht wie ich es instalieren muss.
: Confused:
Interesting answer from T-online as cottula is the only one who build a working kitchen for WM6.X for the magician worldwide!
They never release modern builds for it!
Search here,
http://www.cotulla.pp.ru/Magician.html
choose the rom which fits to your device and how to flash you can find there, too. Tried once for a friend and it worked fine. Good Luck.

Categories

Resources