Related
It seems O2 blocked the rom writing fuction in the Bootloader.
I did use ntrw to writing the patched english rom (which someone did flash it on MDA2), or the patched chinese rom (patched by myself), the bootloader can't regonize the card. I press many many time "camera" but nothing happen. I tried a 64M MMC and a 256M Lexar SD.
I think the only possibility is O2 won't allow use reflash rom in the bootloader anymore, until XDA-Devlopers :twisted: can crack this lock.
My current O2 XDA2 seems locked everything - extended rom is read only and the rom is "read only" too~~
If I can choose, I really want a MDA2 more then a XDA2.
If you have a serial cable, try to dump the rom to SD first, then use the same SD without formatting, with ntrw, I believe direct write via ntrw misses some stuff that the bootloader is looking for.
killercheung said:
It seems O2 blocked the rom writing fuction in the Bootloader.
I did use ntrw to writing the patched english rom (which someone did flash it on MDA2), or the patched chinese rom (patched by myself), the bootloader can't regonize the card. I press many many time "camera" but nothing happen. I tried a 64M MMC and a 256M Lexar SD.
I think the only possibility is O2 won't allow use reflash rom in the bootloader anymore, until XDA-Devlopers :twisted: can crack this lock.
My current O2 XDA2 seems locked everything - extended rom is read only and the rom is "read only" too~~
If I can choose, I really want a MDA2 more then a XDA2.
Click to expand...
Click to collapse
Hi Killercheung,
I think you also come from Hong Kong ...
I have the exact problem as yours, extended_rom is readonly, the Bootloader won't allow me to write from SD, the Camera button does not response ...
You know I've sent my xda2 to O2 for repairing the yellowish LCD ... but before that, I am trying to use the imate gitex_update.cab extended_rom update file to change the extended_rom. I have already modified the cab using WinCE Cab Manager and it should install custom files into the extended_rom. Once I get back my xda2 I will try ...
Do you know anywhere in HK can get a serial cable for xda2 ? We need to figure it out so that we can revert the English PDA to TChinese ...
Woo ...
somesex said:
Hi Killercheung,
I think you also come from Hong Kong ...
I have the exact problem as yours, extended_rom is readonly, the Bootloader won't allow me to write from SD, the Camera button does not response ...
You know I've sent my xda2 to O2 for repairing the yellowish LCD ... but before that, I am trying to use the imate gitex_update.cab extended_rom update file to change the extended_rom. I have already modified the cab using WinCE Cab Manager and it should install custom files into the extended_rom. Once I get back my xda2 I will try ...
Do you know anywhere in HK can get a serial cable for xda2 ? We need to figure it out so that we can revert the English PDA to TChinese ...
Woo ...
Click to expand...
Click to collapse
Hey, You always write message in 3comp.pocketPC?
I know there is one shop selling the original serial cable for XDA (XDA1 /2 use the same cable), but the price is not quite reasonable, $280!!!!
However it seems quite hard to find a cheap XDA serial cable, except DIY~ I think we better get a check XDA usb cable and DIY~
BTW, I heard that someone in this forum even use serial and terminal can't flash their rom. I believe we can do nothing until XDA-Developers can hack the bootloader~
killercheung said:
somesex said:
Hi Killercheung,
I think you also come from Hong Kong ...
I have the exact problem as yours, extended_rom is readonly, the Bootloader won't allow me to write from SD, the Camera button does not response ...
You know I've sent my xda2 to O2 for repairing the yellowish LCD ... but before that, I am trying to use the imate gitex_update.cab extended_rom update file to change the extended_rom. I have already modified the cab using WinCE Cab Manager and it should install custom files into the extended_rom. Once I get back my xda2 I will try ...
Do you know anywhere in HK can get a serial cable for xda2 ? We need to figure it out so that we can revert the English PDA to TChinese ...
Woo ...
Click to expand...
Click to collapse
Hey, You always write message in 3comp.pocketPC?
I know there is one shop selling the original serial cable for XDA (XDA1 /2 use the same cable), but the price is not quite reasonable, $280!!!!
However it seems quite hard to find a cheap XDA serial cable, except DIY~ I think we better get a check XDA usb cable and DIY~
BTW, I heard that someone in this forum even use serial and terminal can't flash their rom. I believe we can do nothing until XDA-Developers can hack the bootloader~
Click to expand...
Click to collapse
Hi guy,
I think based on the experience of ipaq, those terminal commands should work so far if we can connect to it via serial cables. I donno where I can get a cable for xda2 ... but if i can, i will definitely try ...
I also read posts saying problems in flashing rom using serial cables ... but I also read someone is not issuing the correct commands ... donno ... I need the cable ...
Gomadic.com sells them for around $20. XDA and XDAII uses same cable
After Flash ROM by use SD-Card. Although CheckSUM is OK!
I reset and nothing work. I can't do anything, enter bootloader, hard-reset, soft-reset, connect with PC, nothing.
Help me plz.
I really need it for my job.....!
My device is O2-xdaI
Thank
Which ROM did you use ?
Where did you get it from ?
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
Kavin,
I'm not the most experience guy on this forum for this. I'll not be able to diagnose right away what you may have done: What has happened.
Let me summarise what you said with the missing information ?: )
You had a working XDA1 using the following:
- Bootloader version: :?:
- Rom version : :?:
You tried an upgrade getting the pre-cooked Special Edition ROM based on PPC 2002. You :
- Dowladed the ROM in the format :?: (exe, Nbf, Nb1)
- copied it on an SD card using XDATools
- Flashed it to your XDA using XDA Bootloader mode version :?:
and now your XDA seems to be dead.
After your clarified the missing point, I have one more question :
- Can you enter into bootloader mode at present ?
Yearh........! exactly!
Thank Tanguy so much.
Anh previous bootloader is v5.15. Maybe ROM version is v3.12.00.
Now I can't enter booloader.
I tried to tap and hold Power Button then press Reset. So, nothing happen.
I can't lost my xda. I't very very Important device for my job.
Kevin,
Again, I'm not the most expert on this.
What looks surprising to me is that you have lost access to Boot Loader after a ROM upgrade. I'm confident you'll bring your XDA back to work as I never seen post like this which did not get resolved.
My advices are:
- Search this forum on this topic (dead boot loader) to understand why. I'm confident you will be able to correct this situation.
As a start point, try this http://forum.xda-developers.com/viewtopic.php?t=3274&highlight= or http://forum.xda-developers.com/viewtopic.php?t=12991&highlight= http://forum.xda-developers.com/viewtopic.php?t=12925&highlight=
Possible next step, in the XDATools there is an option to Fix Boot loader. I have never used it. It may solve your case. If that were for me, I'd spend what ever time is necessary to understand what has gone wrong before trying various tools to fix it.
Tanguy
i don't mean to be be a jackass, but if you unscrew your stylus, and stick the little plastic end into the little hole next to the headset jack, it should turn on. most people don't know that the device needs this to turn on after a romflash. it's called a hard reset, btw. hope this helped!
were can i download the xda-tool?
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Re: were can i download the xda-tool?
witzvolk said:
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Click to expand...
Click to collapse
Do you have an T-mobile ROM? If yes, you can only flash ROM via SD-card if you have a T-mobile ROM.
Download XDA-tool
I know, that i have to flashing ROM via SD-card, but i think i need for this the
XDA-tool!
And i can not find a correkt link for download this tool.
And i also dont know exactly how to use this.
Sory but i am a greenhorn :wink:
all will be o.K. :
i have found this link:
http://www.xs4all.nl/~itsme/projects/xda/OsImageTool.html
and with this tool i have flashed my rom.
greatings
VW
Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....
might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!
jup.both things NOT HELPED
looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San
can you please write me a procedure?
You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725
i am trying to download files but i get permission denied all the time
You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb
I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?
Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S
Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!
1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.
Please, help me in the following situation
I bought Qtek s100 It turns on only in bootloader mode. What was before I don't know.
Now I try to reflash it via PC. I unpacked rom 1.12 from imate and put there file MaUpgradeUt_noID.exe and then ran it. The utility can't see the device information (it is normal) but it can't see the informatin about the rom I'd like to flash. I click @[email protected] but it says it gather information about the device and nothing happened.
I tried to run again about 20 times, but nothing helped.
I tried to flash it via card using rom-image but there is no invitation to reflash though I flashed via card more than 20 times other htc devices and then everything was ok.
I ran mtty 1.42 and gave command d2s, but it said unknown command. Then I gave d2s command then the device turned off.
I have qtek s110 with broken display. Is it possible to change rom-memory?
Is it possible to get service_manual for magician?
Thanks
First of all, did you back up your current ROM to SD before Flashing new ROM.
1. Yes. It's VERY GOOD. Disconnect your device from PC. You need to insert SD with your ROM to the device and Turn On. Press Power or Cancel button (i didn't realy remeber try all). After that device will flash ROM form SD.
2. No. It's VERY BAD. You need to know start address form what device should start after Reset. Sory here i did not know what it is.
Ñïàñèáî çà ïîìîùü!
Ñóòü â òîì, ÷òî àïïàðàò ñ êîìïà øèòüñÿ íàïðî÷ü îòêàçûâàëñÿ. Ïîïðîáîâàë øèòü îáðàçîì ÷åðåç êàðòó (îáðàç ñíÿò ñ t-mobile 1.01). Íà îáðàç íèêàêîé ðåàêöèè.
Äàëåå ïðîáîâàë ñíÿòü îáðàç ñ ïðîáëåìíîãî àïïàðàòà. Àïïàðàò âûêëþ÷àåòñÿ. Åñëè ñ mtty äàòü êîìàíäó øèòüñÿ s2d, òî mtty ãîâîðèò, ÷òî êîìàíäà íåïðàâèëüíàÿ
Hi,
Read this http://forum.xda-developers.com/viewtopic.php?t=46628 about the SD flash
M
thanks, but te problem is the device doesn't want to work with card. No reaction on the card with rom-image, turning off when typing d2s
Don't know where you bought & how much you paid for it (sure hope it's less then a new screen), but sir I guess you're scr*w*d.
Maybe you can replace your broken S110 screen with the one from the S100. There's a rar file on the board, with a detailed description & pictures on howto disassemble your magician, think it's called disassembly.rar.
EDIT You can find it here http://forum.xda-developers.com/viewtopic.php?t=44841
M
thanks, but I think the screen is alive, it shows usb or serial and etc.
As far as i know, there is some diagnostic tests to understand where is the problem. how to activate it?
Diagnostics
Sorry I don't know of a diagnostics test. But you can have a bootloader without a working rom. Since you bought the S100 in a bootloader state, that's very suspicious to me. & that's why I advised you to replace the broken screen on your S110 with the one from your S100.
Hope you can sort it out & if you happen to run across a diag. pls update the wiki with it.
Regards, M
Hello,
please, if somebody has more information about bootloader commands supported by HP iPAQ hw6900 series (HTC Sable) to share on this thread with us
Will be very helpful if we can extract ROM image through the bootloader of this iPAQ
I dont know much, i know nothing indeeed, however i found somewhere a pack of files for the Wizard that were supposed to work for the sable, however they didnt, but there is this particular file, that when ran in the sable made appear a folder called "2" with an icon of a storage card and which rpely the contents of the root of the device (but for itself i mean no 2 folder inside the 2 folder lol)
I dont know if it is of some use but i definitevely want to perform a corporate install of windows in my sable and kill all that HP crap that comes in bundled
How to enter bootloader
Just press ACTION+POWER+reset with stylus and hold this combinaison for a few seconds, you'll see a screen without backlight (so you must be under bright light to see it) going into bootloader mode.
Put your device on the cradle (which I suspect you had connected it to your PC)
using mtty, connect to your USB Port (or Serial port if serial cradle)
type "password BOOTLOADER" and use "h" as an help command.
Now you can dump a ROM from Bootloader
The command should be sth like "r2sd"
Read the manual of this command "h r2sd full" and use it to dump your ROM on the SDCard
Now you can dump the raw ROM image from SD Card Reader using ntrw.exe
EDIT: going to bootloader mode seem to hard reset your device, backup FIRST!
HI Boris,
where to find the manual ETC.
A RAW ROM maens a bin file? how to convert then to something readable modifiable.... i understand that this is the main issue now.
I want to see a computer file which isn't binary based....
or a full text ROM
In fact, for me a raw ROM is a ROM-file which has been extracted from the device... The difference with a ROM-to-install is the encryption which is not present with raw dumps (to be checked).
Raw dumps can be modified and then re-updated but it needs some operations that are command-line based...
Once you got your raw ROM on SD, copy it to PC using ntrw, you have to find the correct tool to dump the content (dumprom should do the work)
Remember to keep the raw ROM as a backup, and work with a copy of the raw ROM.
You can also cut/paste the file into parts (OS, EXTROM...).
Logically, if you got the original ROM file (the german one) and the same taken from the device (raw ROM), we should be able to modify some existing tools to work with 69xx ROM files and cook some ROMs.
in bootloader mode: type
"h COMMANDNAME full" should show full manual of COMMANDNAME.
To have more informations, once you know if your bootloader has d2s or r2sd ... command name, search for it on wiki and you should have more informations and examples on the specific command.
I need to extract the ROM from one of these as well. I am getting into bootloader and trying to dump the rom to 256MB SD as follows...
USB>
USB>
USB>password BOOTLOADER
HTCSPass.< YHTCEUSB>d2s
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=7A000
d.block_size=200
d.RCA=B368
d.drv_type=40000000
d.busWidth=1
Total card size=F400000
SDCARDD2S+,cStoragePlatformType=FF
Then the device just sits there with Cal Checksum on the screen. I get no response from NTTY or device until I restart.
I read on another thread that it might be locked. I also read that there may be a password to get into another level of access. See http://mobilitytoday.com/forum/showthread.php?t=15217 for details.
I have to get this cracked as I want to restore my good any network ROM onto a network specific device.
Anyone got any other ideas?
Matt4444 said:
Then the device just sits there with Cal Checksum on the screen. I get no response from NTTY or device until I restart.
Click to expand...
Click to collapse
The checksum calculation is a long process, try to wait longer...
Anyway your SD should have been written... have you tried to read it?
EDIT: Does it show ******** or direct checksum calculation? (how long is the process)
I let it run for over an hour the first time but that was with a 1GB SD card and I understand that it would take longer with 1GB.
I haven't actually looked to see if there is anything on the card(s) as I just assumed it hadn't worked. Other threads say that the device gives you progress or at least some response from the MTTY to say it was done.
I have to shoot to a meeting but will try again when I get back...
b0ris747 said:
Just press ACTION+POWER+reset with stylus and hold this combinaison for a few seconds, you'll see a screen without backlight (so you must be under bright light to see it) going into bootloader mode.
Put your device on the cradle (which I suspect you had connected it to your PC)
using mtty, connect to your USB Port (or Serial port if serial cradle)
type "password BOOTLOADER" and use "h" as an help command.
Now you can dump a ROM from Bootloader
The command should be sth like "r2sd"
Read the manual of this command "h r2sd full" and use it to dump your ROM on the SDCard
Now you can dump the raw ROM image from SD Card Reader using ntrw.exe
EDIT: going to bootloader mode seem to hard reset your device, backup FIRST!
Click to expand...
Click to collapse
yes, nice but does not work in 69xx's bootloader. while executing d2s command the device loops on "Calculating checksum" point and nothing happens even after an hour of waiting .. :-(
That is the same problem I am having. I read on another thread that dmc874 (who seems to know what he is talking about) thought it was related to the device being locked. See http://mobilitytoday.com/forum/showthread.php?p=68783
I am now trying to research the locking to see if there is anything I can do to unlock it... anyone else got any ideas?
Does anybody tried to upload a .NBA image through bootloader?
Someone to know the command for sending through bootloader to certain address locations?
What about pdocread or such tools?
Method to dump ROM from wizard using pdocread: http://www.spv-developers.com/forum/showthread.php?t=2888
Does Anyone Know Where I Can Get A English Rom For My IPAQ hw6955 Whitch Is Currently In French Please Help..
b0ris747 said:
Just press ACTION+POWER+reset with stylus and hold this combinaison for a few seconds, you'll see a screen without backlight (so you must be under bright light to see it) going into bootloader mode.
Put your device on the cradle (which I suspect you had connected it to your PC)
using mtty, connect to your USB Port (or Serial port if serial cradle)
type "password BOOTLOADER" and use "h" as an help command.
Now you can dump a ROM from Bootloader
The command should be sth like "r2sd"
Read the manual of this command "h r2sd full" and use it to dump your ROM on the SDCard
Now you can dump the raw ROM image from SD Card Reader using ntrw.exe
EDIT: going to bootloader mode seem to hard reset your device, backup FIRST!
Click to expand...
Click to collapse
..hey great info on how to get to bootloader,, i have a tmobile wing and need to get to the boot loader screen please tell me specifically wat i have to do.. also wat do u mean by action button???????
mafioso617 said:
..hey great info on how to get to bootloader,, i have a tmobile wing and need to get to the boot loader screen please tell me specifically wat i have to do.. also wat do u mean by action button???????
Click to expand...
Click to collapse
Action button = push directional pad in no direction
Anyway it won't work...
Maybe a method based on this:
http://forum.xda-developers.com/showthread.php?p=1480853
I'm looking for a french dump!
I'm also looking for a crazy volunteer to test an english ROM (It probably won't update, but I'd like to see the resut and I've got no such device Magician, Beetles and Prophet only...)
b0ris747....
My pda Hp 6915..normal english 1.21UK rom. hp sites german rom download. Hp6915 update error. error code display vG.30.
Hard reset end soft reset not fonksionert.
Help me.
Not: not english speak sory.
http://forum.xda-developers.com/showthread.php?t=309357
good! Can it works for eten x500?
nixo79 said:
Does anybody tried to upload a .NBA image through bootloader?
Someone to know the command for sending through bootloader to certain address locations?
Click to expand...
Click to collapse
This is information for the BEETLES, Should not be too different than the 6900, If anyone could backup a 6900 series radio, and upload it, alot of us would be grateful.
Source: http://blogs.unbolt.net/index.php/brinley/2007/07/31/ipaq_6515_dead_gsm_after_failed_firmware
Extract of my RadioROM
I extracted from start address of 60000000 with a length of 800000 what I think is my radio rom and this can be downloaded at
http://www.bold.net.au/~behave/radioROM.zip
I came up with this address from experimentation and addresses from other XDAs and extracted with the following command
USB>d2s 60000000 800000
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=1EB400
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=CFAD
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=3D680000
SDCARDD2S+,cStoragePlatformType=FF
********************************
Store image to SD/MMC card successful.
Anything higher and the dump fails.
USB>d2s 60000000 800001
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=1EB400
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=CFAD
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=3D680000
********************************Read radio flash is fail!
The size of the uncompressed ROM is around 1gig because I only have 1gig sd cards to dump the ROM on.
You will probably need a 1gig or larger SD card, dim92 tried writing to a smaller card and the IPAQ doesn’t recognize it but you are welcome to give it a try on smaller cards as most of the image are 0s anyway.
Once you have written the image on to an sd card (use any of the bigrom guides using ntrw), pop it into the IPAQ and enter boot loader mode (power + joystick + reset). It should show up with “Download Sections: 1 press power to start".
Press power button and it should show “Updating radio". Let it finish and if it completed with no errors, power up to see if the mobile phone works. If it still does not work, try running the beetles radio patch now. If this too does not work, try running the LATEST rom from HP.
Useful utilities
iPAQDisk
http://www.xs4all.nl/~itsme
HOWTO: Change serial number and model number for HP IPAQ 6515
HP IPAQ 6515 Bootloader password
Exploring HP IPAQ 6515e bootloader
Nazeroth said:
I dont know much, i know nothing indeeed, however i found somewhere a pack of files for the Wizard that were supposed to work for the sable, however they didnt, but there is this particular file, that when ran in the sable made appear a folder called "2" with an icon of a storage card and which rpely the contents of the root of the device (but for itself i mean no 2 folder inside the 2 folder lol)
I dont know if it is of some use but i definitevely want to perform a corporate install of windows in my sable and kill all that HP crap that comes in bundled
Click to expand...
Click to collapse
Hi buddy,thanks for your attachment.
But I gotta tell ya this doesn't work in hp6915,coz all the ROM in the internet do not have ExtRom.nbf,so nobody's device had flashed the Extended Rom in device...then the Unlock tool will not work in this.
Anyway,thank you
Brose