"No signal" after Special-Edition Rom v1.2 flashed - MDA, XDA, 1010 Software Upgrading

I wanted to unlock my xda by flashing the ROM with the Special Edition Rom v1.2. It worked perfectly and everything worked well. I checked every function and had also some gsm calls.
The gsm unit of the xda used to be on standby the whole day when I noticed that the device was suddenly unable to get a signal from the gsm provider.
I tried a soft and then a hard reset but nothing changed. My xda is not able to receive the gsm signal any more ("no signal").
The crazy thing is that it worked perfectly after the ROM flashing. Since then I have not changed anything on my xda except time settings.
What could be the problem
My configuration:
3.19 GER --> changed to "XDA-developers-SER-v12.exe"
4.21 Radio

Related

no signal / provider, tried everything

hey all,
I've been with the xda I from the very beginning and have always upgraded the roms to newer versions. However, a few months ago I was happy with my 2003 and didn't upgrade.
When TomTom stopped working I thought a nice new upgrade was in order and I cooked up a new rom and installed it. I played around with it, and I think (don't remember anymore) that I've touched the band tab.
Since then I have not been able to get a signal or find a network AT ALL. I have tried everything.
I couldn't install through the normal way anymore, so I resorted to SD-installing.
Spent days here with xda-tools, tried every rom version, even installed official radio stack again. Nothing helps. I have tried selecting the band at the wallaby menu. No go!!
I'm very afraid that I've messed it up.
I will boot into the OS, but no signal. With some roms it will give me the phone setup, with most it won't.
Right now I have the german t-mobile installed. It just says: no service.
Some (current) stats:
Wallaby bootloader 5.14
R 4.21.00
Protocol: 32S54
4.01.19 GER
Is my XDA I lost??
Some pointers would be great! I'm out of idea's.
Regards,
Ruurd
I've had this recently - the way around it is simple, assuming you know what band your network provider is on.
Go to the bootloader menu (soft reset and power button), and select the band on there. I had "no service" on Orange, until I selected "1800" on the menu that is, and hey presto, working phone!
I had tried that already, and it didn't work.
However, I just did it again (tried out all combinations) and yes, it did work!
pffeww!! :lol:
thnx

Help pls! Can't USPL or upgrade radio or rom anymore

I posted this in the general forum but after some consideration felt it may get more views/help here so I apologise for the double posting ~ ~
Hi,I have an xda orbit (O2 uk) and I ran the USPL super CID on it which went thru fine. I then did an OS upgrade from the official O2 website to WM6. However my phone wouldnt make calls or accept calls. The signal bars were initially low which made me suspect the radio not being optimum. Tried to upgrade the radio from 3.06.90 to 3.08 or 3.19 but it kept on giving an error 270 - file corruption,tried flashing to another rom and still the same error.I then tried to re -USPL it and even that wont take... Can someone please help me out with this as I am at my wits end to a solution...
ok...update so far...repeated the flash over and over again, Hard reset and moved the enable and cert rapi to the xda and ran them there first after taking out the sd card. finally it took after a few more atempts. I then ran artemis 20273 rom which flashed easily....HOWEVER even though the signal bars are still up I cant call out or receive calls. Dialling out ,the call disconnects immediately even before it rings (like 0.5secs after i hit the send key). If I call the phone I get a message that calls are not currently being connected to that number! (i know the sim cards working as its my main number) Anyways run uspl again and flash radio to 3.18...goes thru easily but still no calls in and out. Is there anyone with an idea as to the problem or solution.

Intermittent NO GSM issue

Hi,
I have an Orange M3100 which has been flashed to WM6.5 and works fine, other than on boot up it intermittently gives NO GSM errors - despite this, the phone works fine, it is almost like the radio doesn't initialise quick enough. Anyway, I decided to unlock this phone and the unlocker v3a software bricked it, so I reflashed and all was well (but still locked). I have since tried flashing a variety of radio roms using my pc in an attempt to get rid of this error, using SD card method but all of them hang/fail when it comes to updating the GSM rom. I'm currently running the 1.47 radio rom.
Does anyone have any ideas of what I can do? I have tried to revert back to the original Orange rom to no avail (can't flash GSM), have tried the trick with mtty and erasing certain areas of rom to no avail, is it screwed? I just can't understand why the phone works fine, yet I can't reprogram the radio rom!
Cheers
Hellraiser.........>
hermes has two cpus, one is for multimedia,the other is for gsm(radio),if the on gsm problem occurs sometimes, it must be hardware problem,dad sodering,if the problem is always no gsm ,then it software problem, hope it could help you. i think yours is hardware,

WiFi Problems since upgrading to 1.56

I know other people are struggling with Wifi. It does not even turn on.
I have tried several roms and different radios but wifi just will not turn on.
It used to when I was using the original SPL but since I upgraded to SPL 1.54 so I could use the newer 1.56 roms, wifi has not worked.
I have also tried HardSPL from Olinex but same thing.
Does anybody know if it is just the older Touch HDs are affected or is it just a random few?
More importantly, doe anybody know a fix for this?
Thank you.
CJ
Moved out of dev!
First you need to find out if you have an issue with your device.
Re install stock SPL, then your stock rom.
Then check your wifi.
I have not read of people having issues with wifi and can not work out why SPL would effect that.
OK. Here is my story. I bought HTC Touch HD from ebay (Orange one). Used USPL to upgrade ROM. Didn't do anything (it was SIM locked, I was using turbosim). It worked perfectly. Can't understand why that happened, but wi-fi stopped working 2 days ago. Simptoms, when you try to turn wi-fi on, it's just going round and nothing. The only unusual thing I did was, I put SIM card from another provider for a couple of minutes.
Steps to solve this problem:
1. Unlocked SIM, CID, Security with olipro's tool . Thanks to Olipro. Now it is SIM, CID, Security unlocked. Wi-fi did't work.
2. Installed HardSpl 1.56Olinex and WM 6.5. Everything was working like it should be (GPS, Bluetooth, GSM, GPRS, Edge and etc). Wi-Fi didn't work.
3. Restored original SPL 1.14 and Orange ROM. Everything is working. Wi-fi doesn't work.
Opened HTC Touch HD service manual. Read from the begging to the end. The below are some extractions from that book:
---------------------------------------------------------
13.Wireless connection (WLAN/BT) not functioning
(1) Make sure the wireless environment is OK before connecting to WLAN.
(2) Make sure the wireless connection setting has properly set.
(3) Make a life connection with Internet or another device.
(4) Try to re-flash the ROM code. ----->
(5) Try with another main board if necessary
(6) Once the defective part has been identified, verify the defective part again whether the symptom could be
duplicated with another unit.
-------------------------------------------------------------
L1. 6. Memory card for ROM code re-flash ( must be encoded by HTC) HTC design
--------------------------------------------------------------
So, "try to reflash the ROM code" is the interesting one. But were to get that memory card for Rom code reflash.
Wi-fi is a real pain for owners of the HTC devices, just search the web. But it looks like, something has just stuck in my device, and I just need some special program or tool to change the status of my wireless card from from "off" to "on", so Windows Mobile could see it. Can anybody help us.
I had a problem when going to 1.56...and had the wrong SPL. Used CrackWhore's guide, and got 1.56 working. Then later found out that Wifi wasn't working and kept defaulting to airplane mode. I went back to CrackWhore's guided and followed it again, and this time the Wifi is fine and after two days it seems everything is working. You might try that as the SPL may be wrong.

Phone/connection issue

I'm having a 'strange' issue where the phone part of my HD2 doesn't seem to work. This is an HD2 that was locked to T-Mobile, but is now unlocked. I have used it with my O2 sim for around a day and a half just fine until some time this morning it lost the phone connection, and doesn't show the operator for this reason. Obviously I can't make or receive any calls or send or receive any texts. The 'Phone' is turned 'On' in the Comm Manager settings, and I've tried to turn it on and off, hard reset, reflash ROMs, and so on.
I have flashed HardSPL and was using EnergyROM, but have now flashed back to the latest official HTC ROM (1.66.405.2 (76641) WWE) which has radio 2.06.51.07 and protcol 15.30.50.07U. I also tried HTC ROM 1.43 (radio 2.04). Before flashing the official ROMs, I had not flashed any radios so it was left as the original that came with the phone.
The 'strange' part is that mobile web/internet works fine. When reflashing to stock ROMs (or any ROM for that matter) it finds the SIM just fine and recognises it as O2, and comes up asking which settings I want to use (it finds a couple of valid possibilities, O2 UK, Tescoe Mobile and one other), so it must find some sort of network.
Has anyone had any issues like this? Is there anything I can do, or is this a case for contacting HTC?
The SIM works just fine in my old Touch Pro.
Thanks for any help!

Categories

Resources