Database Users

Qtek 1010 software for O2 XDA?

I have for a long time been looking for software updates for my O2 XDA (I have ROM 3.02.00 ENG and radio version 4.01), but with no luck.
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Is it possible to use these 2 files to update the software?
As my O2 XDA is unlocked, I wonder whether updating the ROM and the radio version will have any effect on the unlock, i.e. could the phone change to locked?
Best regards
Amoll

amolldk said:
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Click to expand...
Click to collapse
Where have you found these files!?!? I have a Qtek, but haven't heard anything about no upgrade. You bet I'm interested!
/b

Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
I am still curious whether this upgrade can be used for O2 XDA.
Anyone for a test?
Best regards
Allan

It's working! I just upgrade the radio rom from 4.16 to 3.19.01.

Sound more like a downgrade then a upgrade. :lol:
Did you also did the winCe rom upgrade?

Don't look at the first number in the OS or radio versions, it denotes region. 4.16 is an older version than 3.19.

Was the upgrade done on a Qtek 1010 or a XDA?
Amolldk

Hi
Anonymous said:
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
Click to expand...
Click to collapse
They only say, somthing about sending the OS via eMail. It seems, that there now downloads left ...
Has somebody got that Download and is willing to share it with us ??
Thanks

The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers

Zviratko said:
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Click to expand...
Click to collapse
Where is the Download option for the Radio Version on the first side, I can´t find it.

http://www.idedata.no/support/support.asp?ID=299

SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems

NoBackUp said:
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
Click to expand...
Click to collapse
You are wrong, the Radio update goes first and patches WinCE.
btw. don't use the update, really, use the Ireland O2 update ROM.

Strange file after updating
I have upgraded my Qtek using
http://qtek.dk/software/upgrades/316-CE-update.zip
http://qtek.dk/software/upgrades/Radioupgrade.zip
I performed all the instructions correctly and my pocket pc now has the
upgrade. However, in the remove programs, there is a file called HTC RSUupgrde.
I dont know I don't have to remove this or should it actually be there on my pocket pc? What happens if lets say I have to do a
hard reset and I lose this file?
Any suggestions? :?:
[email protected]

How to use FM in India
Hi,
My frnd has gifted me a O2 XDA Orbit.....I bought this from UK...BUT I am not able to listen fm in India.....
Please help me.......
Also plz suggest me some website to get some games, software for O2 XDA Orbit.....
Thanks in advance
Sam

Will there be a WM2003 upgrade for Qtek 1010?

Hi- i have tried to contact my local dealer in Denmark, but nobody seems to know whether there will be an upgrade or not. Any clues ?????

You don't have to wait since you can use O2's WM2003 rom.

Sounds good, but what happens with my qtek ??What about the radio upgrade, and can i go back to the previus version ???

Your qtek's rom will simply overwrited by O2's rom. It just like install a difference version of Windows to your computer (May be it's not a good example...). Except the boot up screen, there is no major different.
I think you should upgrade your qtek's radio to Qtek 3.23 or O2 4.21, because these two version were reported working great on the WM2003 rom.
You can go back to the previous version, but you should have a 64m+ SD Card and a XDArit compatible SD Reader (most stand-alone SD reader should work), because the windows flashing utility (program a) is not working under WM2003, you must use a SD card to downgrade the rom.

Hi,
Any links to get the Qtek Radio [email protected]?
Thanks
Ravi Radh

raviradh said:
Hi,
Any links to get the Qtek Radio [email protected]?
Thanks
Ravi Radh
Click to expand...
Click to collapse
ftp.zensay.com
user:qtek
pass:qtek
It's under the rsu directory.
Do not use Passive Transfers.

Upgrade of Bouygues' iPDA (French version of Qtek 1010)

News and issues about upgrading the Bouygues' iPDA.
Nouvelles et problèmes concernant la mise-à-jour du iPDA de Bouygues.

sopheap said:
News and issues about upgrading the Bouygues' iPDA.
Nouvelles et problèmes concernant la mise-à-jour du iPDA de Bouygues.
Click to expand...
Click to collapse
I've just screwed up my iPDA's radio stack by upgrading it to 4.21.00 (O2 upgrade). :?
I really need someone to help me getting out of this mess! Does anyone owns a Bouygues iPDA with the original radio stack ROM and who can gently pass it on?
Merci les Frenchies...

Hi,
You got problem with the 4.21.00 O2 upgrade ?
Why would you re-flash your XDA with the old originial Bouygues rom ?
Rather put a kitchened Rom from Jeff site (a WM2003 based rom or a 3.17.03 based rom as well)
It works great on my Bouygues Ipda ...
Frenchies a la rescousse :wink:

zendrui said:
Hi,
You got problem with the 4.21.00 O2 upgrade ?
Why would you re-flash your XDA with the old originial Bouygues rom ?
Rather put a kitchened Rom from Jeff site (a WM2003 based rom or a 3.17.03 based rom as well)
It works great on my Bouygues Ipda ...
Frenchies a la rescousse :wink:
Click to expand...
Click to collapse
Thank U for your answer zendrui!
Yes I got a problem with the 4.21.00 RSU... I don't any signal at all...
My previous Radio version had a weird numering: R3... something instead of the usual "4.xx.xx"... Do you think there could be several hardware design of the iPDA?
By the way if someone has the original Bouygues RSU, please let me know!

sopheap said:
zendrui said:
Hi,
You got problem with the 4.21.00 O2 upgrade ?
Why would you re-flash your XDA with the old originial Bouygues rom ?
Rather put a kitchened Rom from Jeff site (a WM2003 based rom or a 3.17.03 based rom as well)
It works great on my Bouygues Ipda ...
Frenchies a la rescousse :wink:
Click to expand...
Click to collapse
Thank U for your answer zendrui!
Yes I got a problem with the 4.21.00 RSU... I don't any signal at all...
My previous Radio version had a weird numering: R3... something instead of the usual "4.xx.xx"... Do you think there could be several hardware design of the iPDA?
By the way if someone has the original Bouygues RSU, please let me know!
Click to expand...
Click to collapse
You know what...
I found the solution to my problem by myself...!
For those who encountered the same issue:
1. Bootload the PDA (hold "On/Off" button and soft reset)
2. Enter the GSM module test menu by pushing the Calendar button
3. In the menu, select this sequence:
- GSM TURN ON
- GSM RESET
- GSM 900 / 1800
In fact the RSU upgrade will kind of resetup the GSM module (or turn it off), which is apparently not suitable for the French network. So one has to set the GSM module with the right parameters...
I guess this is applicable to other countries as well.
I am so happy! :lol:
Hey in the menu I noticed options "GSM 1900" along with "GSM 900" and "GSM 1800"... Do you think the XDA is actually TRI-BAND?

Well pleased for you if it works.
Personnally I put a WM2003 4.00.05 rom and it works well.
I also saved the original rom form bouygue if needed (but it is really a too old rom)

Windows Mobile 2003 Release date announced!!!!!!

T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html

But this is only for German Model, isn't it?

hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad

Release date is now beginning January
Hope there will be an update....
Regards
Stefan

aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika

http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke

well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam

somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....

mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???

HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,

chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika

Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?

Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features

hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?

i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again

Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika

Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.

chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker

the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika

Thanks v much.
But that's integrated with the us radio which is not suitable for me.

How can I restore my system to the original states

Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance

The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck

Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?

Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks

ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?

I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.

By the way, does it exist a solution in mda to copy contact name to the sim card?

pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II

sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.

ok thanks a lot, do you just have the name of one of this freeware?

try this http://www.pocketgear.com/software_detail.asp?id=7496

don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.