Related
Hi there.
I am using the official 1.72.181 UK ROM on my Australian XDA II- connect through Telstra.
All works well, except that I can't access the Telstra WAP homepage- or any other page that begins with wap.[web site name]. When I had an Australian ROM, you had to use WSP://.. to indicate that it was a WAP site- this doesn't work with the UK ROM.
Has anyone else had this problem?
thanks
dchalmers said:
Hi there.
I am using the official 1.72.181 UK ROM on my Australian XDA II- connect through Telstra.
All works well, except that I can't access the Telstra WAP homepage- or any other page that begins with wap.[web site name]. When I had an Australian ROM, you had to use WSP://.. to indicate that it was a WAP site- this doesn't work with the UK ROM.
Has anyone else had this problem?
thanks
Click to expand...
Click to collapse
Remember, the 181 ROM has been modified to work with O2 UK's WAP site - using wsp:// will work, but the telsta settings need to be in the My Work Settings, and you need to change the gateway address in the Proxy settings from o2's to Telstra (whatever they are)
Thanks. I should have added that I can access all http://www. [ ] sites- I have the internet settings working fine.
Its only sites that start with the wap. prefix that I can't access, such as the Telstra WAP homepage. I can access other WAP sites, but only those that have the form http://www.[ ].com/wap
IE seems to not know what to do with the wap. [ ] prefix
Hello all,
I tried to setup the TMobile "web and walk" GPRS stuff, but without success.
I get a nice GPRS logo (it's connected) but when going to a webpage it says "can't connect/locate the page".
Using my (local) Wifi connection it works fine, but when on the road I would like to use my GPRS connection...
Note : I'm looking for the Dutch settings...
Thanx in advance,
Michael 8)
Hey Michael,
As far as I know this is the cab file you need to install for the T-mobile settings.
Good luck.
Hey Panja,
Ok, will try it.... Is't that loaded during (re)Flashing the MDa Vario ??
I just reflashed it using the latest (found here) Dutch TMobile 1.6.2.2 ROM (dated 1/11/05)...
Thanx for your help.
Michael 8)
Edit : Tried it, helaas without success !!!??? Anyone who has GPRS active and running in the Netherlands for TMobile ???
Thanx again for you help !!
Michael 8)
Its a cab file that was in the extended rom of a Dutch T-Mobile rom.
Its official and should have all settings for Dutch T-Mobile users.
Hey Panja,
Thanx for your answers and suggestions, but I'm still not able to get a webpage or email when connected using GPRS (tMobile)....
Using Wifi all is ok....
Anyone in the Netherlands who is using TMobile GPRS on his/her MDA Vario can tell me the settings... On the TMobile website they don't even show the MDA Vario settings !!!!??? (only from MDA to MDA II and SDA).
Note : I tried all of them without success...
Thanx for your help and understanding
Michael 8)
The gprs settings are very simple for Dutch TMO.
Just create a 'Cellular line (gprs)' connection with 'access point' internet. That's all no user/password etc., if it doesn't work it might be your radio.
Cheers, M
Hey oltp,
Looks like I was thinking to technical to establish a GPRS connection, and I was looking at other (TMobile GPRS pages/set-up's).
This did the trick !!!! So simple !!!???
Thanx again for your help.
Michael 8)
settings for all dutch networks
for settings for all dutch networks voor phones and smartphones
try : www.bel.nl
t-mobile netherlands wifi settings
I updated my rom to 2.26 english version and lost the wifi settings for t-mobile netherlands. Can someone please help me because I don't understand Dutch.
check oltp posting (above) on Jan 09, 2006, you should see the gprs settings for t-mob NL.
if you stil have some trouble go to the xda-developer ftp site from wiki xda-developer. There's a pdf file for HTC wizard settings for dutch operators.
cheers,
thanks for that. Couldn't find the .pdf file but did find a .cab file with settings which I'll try.
I just updated rom and can not find anywhere the setting for my 8125, I need the gprs,mms, and proxy settings. Thanks
OK, i have finally taken the plunge and got a working ROM dump from my v1640. I have tested this rom, and it can be flashed back and it works (includeds the extended rom and version 1.09.00 radio).
If anyone wants this ROM, please post here and i will upload it to the FTP (I don't want to go wasting space on the FTP site, or my upload allowance if no-one is going to use it)
I know that this is an older ROM, but with all the new ROMs from other providers out, and the lack of one from Vodafone, i know that some people will be wanting to upgrade to a new ROM, but will be wary to do so without the option to go back to original. There may also be people who want to experiment and see how this rom performs compared to other ROMs.
I also have the ms_.nbf file for the extended rom if anyone wants it seperately.
Great,
I'm really interested. In fact I'mplanning to upgrade my v1640 ITalian version and I'd like to have a backup.
I assume your image is the English one.
Could you send to me an howto dump my Italian image?
Or maybe I can try with some product like sprite clone?
Thank you
Lupick
OK, basically i have outlined the procedure below (thanks to buzzdev and this site for all the great information)
First, you need a "host" rom upgrade to butcher. what you need to do is use winzip to unpack the exe into a file. you can delete the nk.nbf that is extracted.
http://buzzdev.net/component/option...view/id,8573/catid,33/limit,15/limitstart,30/
I used these instructions to dump the rom (its pdocread that you need, so the rapi enable cab)
http://buzzdev.net/content/view/65/115/
I used this to encode the ROM to nk.nbf
You will need to set version and operator code (Voda_001)
http://buzzdev.net/content/view/63/45/
I also unlocked the extended rom, and then decoded the extended rom (ms_.nbf) in the qtek flasher that i was butchering and replaced all the files in the qtek extended rom with all the files from the vodafone extended rom (ms_.nbf).
I also added the 1.09.00 radio image to my sollection of files, just so that the upgrade was in there.
Finally, to make it work, i used the MaUpgradeUt_noID.exe to allow me to flash it.
This should give you a working rom, and will also give you the extended rom as a file that you can inject into another operators upgrade utility to have all the nice vodafone settings
Hi
I've been trying to get Vodafone live working on my Jasjar
does the V1640 Rom allow for Vodafone live ?
In that case i would be interested else i'll just wait for the Official Vodafone Live Update
Has anyone else had some luck with VLive?
Unluckilly, i have not got LIve working fully. i have however got it working partially and you do not require the voda rom to do it.
HeliosFA said:
For voda in UK (maybe same for other countries), there are 2 connections required - one for internet, and one for wap. You need the connection details for both (set wap as the default work connection and internet as ISP)
the url for live is wsp://live.vodafone.com
Click to expand...
Click to collapse
You will also need to setup the 2 connections as follows (the WAP one is NOT setup by the extended rom cab)
HelioFA said:
"ISP" connection
APN - internet
User and pass - web
"Work connection" (For vodafone live)
APN - wap.vodafone.co.uk
User & pass - wap
Proxy - HTTP - 212.183.137.12:8799
Proxy - WAP - 212.193.137.12:9201
Proxy - Socks - 212.193.137.12:1080
Proxy settings are required for the "Work" connection
Click to expand...
Click to collapse
Hello,
Does the extended ROM file have settings for Vodafone SPAIN? for MMS, Vodafone, Live 3G Settings?
Hi
On the New Imate Rom the South Africa Settings for Vodacom Live called vlive! is on the rom but it seems incorrect.
You cannot even connect to 3G or Wap using those settings. We had to re-install the previous Vodacom CAB file to get 3G connectivity working
I took the South AFrican settings of a Nokia 6680 (which connects) and set it up on my Jasjar without success then it's the same I cannot connect
They may just have a setting if Phone=JasJar then access=NOHighWAY Option on their APN
We tried the same settings on a HSDPA card and the same happened but we saw that the vlive! exclamation mark gets lost
Personally i think it's a way to block "unwanted" machines and PC's to access their content as people may be able to copy it, using anything other than a Joda-phone ... :roll:
Yes please
I'd like access to the original ROM so if you could upload it that would be great.
OK, gonna zip it and upload it tonight. it will be in the XDA FTP and will be labeled
Pls send me the htp so I can use it too thk you. by the way it wont make my phone lock the signal back again right ? cause now it is unluck to use with any carrier
Dear Heliosfa,
could I have one copy of your V1640 Vodafone UK original ROM ?
I'm so desperated because my old V1640, at this moment, run only in the "bootloader mode" and, if I try to install any coocked ROM not original,the installation stopped at 7% (max 8%) .
Thanks for your help .
Excuse me for my english .
Michele Reale from Campobasso-Italy-
All O2 settings applied through the network wizard but does not send on this rom, everything was ok on PhamQuang's and Meschle's. Just wondering what might be wrong on this one.
I am under the assumption that you are using an Orbit. If so, the settings used by the ROMs for O2 will not work on this phone. You need to manually setup the GPRS settings and slightly alter the MMS settings.
Thanks anyway mate, put the new version of arcsoft on the orbit and MMS are working now, strange really