Related
Hi,
This probably the most asked question here yet I have one thing thats different to the others from what I have read.
I live in Australia, my 02 XDA ppc isnt sim locked or anything however my issue is related to the o/s I have ppc2002 I wanted to upgrade to 2003 and found a file for download and am unaware if this file is the correct file to download for upgrade to my XDA?
I also know I need a radiostack which will work on my XDa once it has been updated to 2003.
2003 file @ http://cuba.calyx.nl/~jsummers/XDA/PPC2003PE.nb1.zip
Radiostack which will work for me?????
Any help would be appreciated aswell as telling me what are the neccessary files on my PC to use to flash the ppc phone edition via my USB cradle also.
Any other info should be available with my profile.
Regards
A7MAD
Hi,
if ur phone works fine in making/receiveing calls, then all u need is a ROM upgrade. goto the kitchen at www.yorch.net and cook a ROM based on 4.00.05 ENG. select the file to be an exe file. download the file to ur PC and connect the xda to the cradle and make sure it's connected to power. run the exe and follow the instructions.
good luck
Hi,
Thanks Biso007 for all your info/help.
I am currently downloading the file that I 'cooked' as I type this out however one thing I was not sure about was in the string section was I to change the string to 4.00.05 as it was set on 3.16 ...
I did change it and its downloading I assume there should not be any issues.
If there is any concerns or if I did the wrong thing by that please inform me... BTW the file was made into an .exe.
Regards
A7MAD
Hi,
I visited www.yorch.net and 'cooked' my own ROM made it into an exe and have it downloaded right here it's a 4.05.00 rom flash but I have to ask what software can I use to flash the unit with because I do not have an SD card so I am stuck using my PC to do the flash, I have the official backup files for my ppc from 02's site so I am ok I guess if all else fails i will flash back to what I am currently using.
I wanted to flash the rom onto my ppc however what software can I use? I tried Microsofts Sync software I have 3.7 but it doesnt allow me to flash as it gives me an error message.
Message says:
"Your Device Information;
PW10A1:001
3.20
English
Your upgraded image info;
PW10A1:007
3.16
English
Please download the compatible utility and try again"
Any help would seriously be appreciated, but what is the compatible utility?
Regards
A7MAD
unfortunately this is a known issue with some ROMs that can't accept the exe method. you are stuck with the SD card upgrade.
Will adaptrom not work for this?
Sorry folks but I have already posted this and don't know how to delete the previous post. after I reviewed the previous post I don't think I made myself clear enough. Please accept my apologies. But would appreciate help on this.
I have read the majority of the info on XDAtools on the forum and installed I believe correctly. I currently run on Win98SE. I have installed Jeff summers version of XDA tools. And though I think I understand what I am doing I am not totally convinced. Before I embark on cooking roms and upgrading etc I would like to be able to do the following:
1: Dump my current rom from my device to my PC I can do this using
XDAtools OSImage. But have noticed that I can only appear to dump
this as NB1(windows CE(*.nb1) type files if I try to call this NBF I get
the following errors:
”error opening C:\program files\xdatools\bootloader_v5_15.nb0ea for
reading. the system cannot find the file specified”
”error opening source bootloader from C:\program
files\xdatools\bootloader_v5_15.nb0ea. error opening target device”
Is it possible to dump my ROM to a file called ‘xxxx.NBF’? or must I stick with *.NB1? this is not a problem as long as the NB1 file can be reloaded.
2: When I try to upgrade my ROM by using OSImage tool and selecting
source as:
‘C:\PROGRAM FILES\XDATOOLS\BINARIES\ATT160204.NB1’
Select destination as ‘device memory (via Programme A) ‘
When attempting to load an ‘NB1’ ROM from my PC to my device memory
(via Programme A) I always get the following message:
”Programme A not found - run with --register error opening target device”
I originally ran the ProgrammeA with ‘--register’ when first installed and tried numerous times since. Can someone please help as I am sure it is something simple I am missing. I only want to be able to use XDAtools to dump and restore ROMs.
I have tried searching for a solution but to no avail. Any help appreciated.
Thanks in advance John.
May you tell your current ROM version and device type?
Some ROMs do not accept the EXE or the XDAtools with NBF files upgrading methods. You may have to use the SD card flashing in this case.
Thanks Bis
Thank you Biso007 I am currently running A.30.09.ENG and my device type is an XDA1. But I believe the problem is associated with XDAtools ProgrammeA as it cannot find the specified files. Though I have followed all instructions for definition. There is probably something simple I am missing. You see I only want to be able to use XDAtools to dump and restore Roms without the need for SD/MMC cards.
Thanks John
Try downloading the XDATools from Jeff Summers site, it has all the missing bits, including the required batch file :
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
That's from the sticky XDATools thread, probably read through there and you will find most questions answered if you continue to have problems.
Remember though that the SD card method is the preferred option, and if you burn any T-Mobile ROM's the SD card is *required* to reverse that.
Re: Thanks Bis
jdoherty76 said:
Thank you Biso007 I am currently running A.30.09.ENG and my device type is an XDA1. But I believe the problem is associated with XDAtools ProgrammeA as it cannot find the specified files.
Click to expand...
Click to collapse
XDAtools cannot work with WM 2003.
and you no need to backup A.30.09.ENG (ATT USA version WM2003), you can get it from online!
cgigate said:
XDAtools cannot work with WM 2003.
Click to expand...
Click to collapse
is that confirmed ??
Biso007 said:
cgigate said:
XDAtools cannot work with WM 2003.
Click to expand...
Click to collapse
is that confirmed ??
Click to expand...
Click to collapse
Yes, it for sure!
XDAtools only works with Pocket PC 2002 or some test version WM2003.(<4.0.11)
It cannot work with WM2003 official release (AT&T A.30 or T-mobile).
Thats weird, I am positive I used xdatools to program my sd card through reader writer after downloading the official WM2003 upgrade, in fact I must have used that method because I had to seperate out the radio stack and program just the ce rom, I have no other tools to do this.
XDAtools only works with Pocket PC 2002 or some test version WM2003.(<4.0.11)
Click to expand...
Click to collapse
I think you'll find that it only does *not* work with T-Mobile WM2003 ROMs. That's only because they lock up their OS to try and prevent us from changing ROMs. I don't think that's the case with any other manufacturer. I also think it doesn't make any difference whether it's WM2003 or WM2002, it solely depends on whether the manufacturer locks the OS.
Thank you cgigate & ebswift re XDAtools/WM2003
Thank you Cgigate and ebswift maybe this is why I am encountering problems with my download and restore of my ROM. I inadvertently choose a WM2003 AT&T rom to practice with. Maybe I should have chosen a PPC 2002 ROM to test??
I thought I had a problem with XDAtools and that I did not have all the correct links/files in place. Maybe I should dump my ROM and try restoring a PPC2002 and then re try my test. Thanks again guys.
i used xda tools with the AT&T WM2003 rom on my uk o2 xda with no problem. I wanted to keep my old radio stack as it was working fine and just used the os upgrade file, via SD card.
I would recommend updating activesync to 3.7 if you are doing it via the XDA cradle.
maltloaf
Did you use XDAtools to copy direct to device
Thank you Maltloaf, when you upgraded your rom did you use XDAtools directly from PC to device or copy the file onto your SD/MMC card and use the bootloader program to load ?? If so maybe you can answer the problem I am encountering. Thanks john
i have flashed twice (had to go back to 2002 for a short while)
both times using the SD card/bootloader method and I transferred the file onto the card using xdatools in the xda/cradle
Thank you Maltloaf
Thank you Maltloaf this seems to be clearer now, but in the context of upgrading etc XDAtools is only being used to copy the file from source to SD/MMC card. I was under the impression that XDAtools did not require the use of SD/MMC card. But maybe it's a matter of finding out what works for you. John
well xdatools should be able to flash directly to the xda as far as i know but it's always the safest way to do it sdcard style
Thanks to all
My thanks to all you helped with my recent questions. Thanks John
For some odd reason my T-Mobile PW10B1 (as labeled on the back of the device) is identified as PW10A1 in Device Information. I never paid any attention to that, but I got an error 012 when trying to upgrade to T-Mobile W2003. I'm currently running 3.17.03 (the XDA-developers Special Edition ROM v1.2), so perhaps prior upgrade affected the stock ID change from B to A.
How do I change it back to PW10B1, or how do I go about installing W2003 on my messed up device.
Thanks,
Marcin
Marcin,
i have the same with my AT&T. however i'm able to upgrade it to WM2003. the only thing confusing me that after upgrade it is stuck on splash screen, no further load. i tried different methods and versions... no results...
if you find the answer, please let me know
I can fix the problem!
Marcin, all you need to do is get an sd card and reader writer, you can then do the sd method of flashing which bypasses version checking. You will need xdatools also, just pass your mouse over xdatools link and you can download it from there.
very helpful
Nice advice, cgigate...that was very helpful...
cruisin,
I am in the same situation as marcin.
Please confirm my understandingof the bootloading from SD:
1. Using the SD+card reader, I copy the W2003 NK.NBF file to the SD.
2. Insert the SD card into the XDA
3. Goto the bootloader mode (power + soft reset) and press the middle of the rocker key.
4. After the ex counter increases.. at the end, press hard reset.
5. After 60 sec press hard reset again
If this is correct then why do I need the XDATools for?
Copying the file to sd will not work, it needs to be in a special format for the xda to boot the rom burning procedure, you will need xdatools. At the end you push the unscrewed end of the stylus into the tiny hole bottome right of xda, then again after 60 seconds and you should have a working system.
cruisin-thru
Thanks cruisin-thru.
I want to be very clear before starting the upgrade, so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Thanks again for your patience!
BTW: I did steps 1 to 4 of "unlock Wiz/Wallaby/SER/Backup and
now I (like marcin, have my T-Mobile PW10B1 identified as
PW10A1). I have yet to do the steps 5, 6 and 7. If I do these
steps. Will the identification be corrected?
so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Click to expand...
Click to collapse
yes after osimagetool have copied the rom to the sdcard the card should be unreadble to anything but the xda's bootloader
Upgrade to W2003
It is my great pleasure to have great and helpful people who advised and suported me in my XDA fiddling adventures. I have now upgraded to W2003 and unlock my phone to use any provider I wish.
Thanks to all!
Melody
Help me please !!
I have a XDA PW10A1 without the instalation cd-rom where do i find the drivers for my XDA ....... please help me !!!
Valikos, the only installation you should need is activesync which is freely downloadable from the microsoft web page.
Yes but!
If i have Win98 SE my computer do not see my xda , there are not drivers for 98 ? ....
Just make sure you have the latest ActiveSync version which is 3.7.1 ... sometimes uninstall then re-install solves this issue.
ok .. another question .... i have all my contacts in to a motorola accompli 008 and like the xda i don't have the instalation cd and no drivers , where do i find the drivers for this one , because i have more that 200 contacts in this one and i wold like to transfer all contacts in the xda
hi,
thanks to the support on this site i was able to unlock my o2 xda. the new rom of your special xda-rom was installed. as it is only in english i would like to have a german rom again..... downloading and installing the o2 or t-mobile updates always failed. the rom-image wasn't found or the active sync-connection failed.... is there a german tool available?
cook 4.00.33 or 4.01.19 based ROM in the kitchen and use the SD method
o2 rom german
thx for your quick help. downloaded rom kitchen yesterday. but there is no executable file resp. can't find my handheld in the winzip unzip-folders.... furthermore i am a beginners and did not really understand how to use the sd-card. if i try to install the progamme a from o2 i always get default "rom image not compatible" or even "can't establish active snyc connection" (even if xda is connected and syncronized the other data correctly.
I think your choices are either to get used to the English OS, or to look around a bit more on this site to learn the SD-method.
I would personally opt for the first choice, but being from Sweden I really don't have a choice. There isn't such a beast as a Swedish WM 2003 for the xda :-(
SD method is quite easy .. cook ur ROM as .nbf file ... copy this file to the SD card using the xda with XDAtools or a SD reader/writer .. insert the card in ur xda and goto the boot loader screen .. it will automatically flash ur ROM
Hey Guys,
My friend gave me a pocket pc with phone edition. When I tried to insert my sim card it asked me to the unlock code. My friend used this mobile for T-Mobile sim card in US.
Here is the ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
After typing my PIN code it asks me to unlok the sim.
What can I do to resolve this problem
Thanks,
bm_t
Try the XDA unlock tool. You can find it on the website.
I have unlocked tmobile using that tool. However if it gives you problems unlocking.... I would suggest installing the xda rom and then try.
I am going to unlock a new Tmobile on tuesday. If this does not work you can get in touch with me on any chat and I will walk you through the process.
lemme know if you need anymore help.
Cheers!
Diki :lol:
Thanks Diki for your reply.
I have tried XDA Unlock and XDA2Unlock but failed.
When I tried XDA2Unlock it reports some error like COM2 0X..... (Hex #)
You have seen my ROM version and Radio version. How do i install new xda rom .
I only have the USB cable. Do I need a serial cable?
thanks
As much as i know, it will not work for you to unlock your device.
xda2unlock is only for the second Version of XDA (MDA II, MDA II,...), so you have to use the xdaunlock tool.
there are several postingsa, that unlocking will fail with your radioversion.
Maybe they have changed the code in this version.
There is a guy (cgigate) that promise he is able to repair and unlock all devices, but personal i don't believe this.
i believe changing ROM will not change anything. But you can try it. Look for the XDA deelopsers special ROM 1.2 or use the 3.17.03 ROM and the unlock tool.
But flashing a device could be dangerous.
Changing the radioversion is also possible, but the risc to end ata paperweight is very high...
Stefan
Hello LumpiStefan,
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Can you help me with this?
thanks
bm_t
bm_t said:
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Click to expand...
Click to collapse
Cooking process works well for me.
Maybe you have to wait a few minutes more.
Cooking process can be up until 5 minutes.....
Otherwise try again the Build Rom now button....
HTH
Stefan
Hello LumpiStefan,
I have tried serveral times but I couldn't able to download the ROM.
Do I have to register or download some other application to download your ROM.
Here is what I did to download the ROM
After Entering ur site LumpiStefan, http://lumpistefan.dynsdns.org
I clicked PPC 2002 and select 3.17.03 with XDA developers (Default ).
and clicked 'Build Rom Now' button.
When I clicked 'Build Rom Now' button, the only thing that changes is the graphs (right hand side of the page). I have tried many times but only the graphs changes.
Did I miss something (some procedures or .....)
thank you for ur time
After clicking cook rom you should have the option to specify where to download it.
Hello,
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
thanks
bm_t said:
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
Click to expand...
Click to collapse
You can try http://xda.weblink.net or use http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe to download the xda developers ROM based on 3.17.03 including the unlock tool....
I think you're the first guy that has problem to download a rom from the kitchen.
What for browser are you using? Have you ever tried another ROM?
HTH
Stefan
Hi LumpiStefan,
Thanks for ur reply.
I have checked both sites (i.e http://lumpistefan.dyndns.org/ and http://xda.weblink.net)
I have tried also another rom but the same problme. I have tried to download the rom from Linux and win XP pc.
I have aslo downloaded http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
but when I executed this file from my win XP machine ( I have connected my XDA through USB cable and installed ActiveSync 3.7.1) it reports error (something like Unable to find the XDA Please connect Serial/USB cable)
I'm really really stuck with this phone
thanks
it seems that you don't followed the correct procedure.
This link it's a wizard and could help you: http://wiki.xda-developers.com/wiki/UnlockWiz
Hello Folks,
I have seen a post in form.xda-develpers.com that this file http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
will not work because my phone (i.e PC2003) (the adaptROM is not compatible with PC2003)
He said the only option to Unlock the SIM is only using this xdarit.exe application. Since my SD is 8 MB, I can't load the ROM with this space.
As far as I have seen the situation, my only option is getting the serial cable.
Do you have any suggestions?
Thanks
bm_t said:
As far as I have seen the situation, my only option is getting the serial cable.Thanks
Click to expand...
Click to collapse
Get the serial cable.
SIM Lock
Hi,
Every time I run "XDA-developers-SER-v12.exe" I get a message, error getting data, and then the program close.
plz advise. thanks
'error getting data'
I had the same error. I read somewhere on one of these posts that
there was some capatibility between Programme A.exe and Activesync 3.7.1.
Apparently you could downgrade your activesync version or use XDATools to push the nk.nbf file down to an SD card and flash from there. Use winzip or something else to extract all the files in the SER installation exec. In the English folder you'll find the NBF file to use.
In XDATools put this as the Source, target is the SD card in the device. Go to bootloader utilities (power+soft reset and maybe press contacts) and depending on your bootloader version it may detect you have a flash image on your SD card. Follow the instructions on the pda to flash the rom.
Hi rhodwyn,
Thank you for your support, but still I cannot downgrade my "BootLoader" to "5.15" with every boot I'm geeting "5.22" even after loading the spocial edition ROM.
Also, I cannot find (XDArit & Wallaby bootloader version 5.15 files) in the neet.
Please advice.
Thanks.
Hi ALL,
I did unlock (SIM LOCK) my phon.
Thanks you all for help & support.