Related
i went to use my vodafone VPA (working fine for last few months) for a phone call, and the person i was calling couldnt hear anything - bad line i thought.
then i called back and the same...
then my house fone... the same, and when i record a video or voice note, if i shout into the microphone and play it back at max volume, i can just about make out what i'm saying...
any idea's on how i can fix this? i've tried a hard reset, and taken the phone apart to see if its anything obvious (there isn't) i've also tried enabling/disabling microphone AGC - no avail
Dave
no help at all?
Dave
i have the same problem with my imate jam initially i thought it might be a software problem so i reflashed it with the origional Imate Rom and so now differance i played with all the settings i could find to no avail and finaly gave up
since my jam was still within its warranty period i gave it in for fixing i should be getting it back anyday now and if i can find out what they did with it i will definetly post it here
Just talked to the guy i gave my phone to today he said tht he tried changing the microphone part but it still had the same problem it seems that there is some problem with an IC ( whatever that is) and he has more chances of killing it totally then actually fixing it if he tries to change it
microphone is bad on phone calling...
hi,
I have same problem, too
mic. volume is very bad when I calling . but it is working good when I record anythings.
how can I change mic.volume on calling to like recording level ? ? ?
need to change some values on register? or what?
who can help me?
I have MDA III
WM5
veysel
Istanbul Turkiye
Microphone AGC
Deactivate Microphone AGC in the settings.
And your problems should be solved.
Anyone has the same problem???
When calling someone whos already on the phone, I get the usual busy tone - but on the Vario II's speaker (loud) (like it turns the speaker on automatically,... weird) Its annoying if I want to make a quite call at the office!
Yep, I get that as well! Effin' annoying it is as well when you've got the unit to your ear
I had this same issue once. I am using a HTC branded TyTN. My normal network is Cingular in the US, and I do not get this issue when using my Cingular SIM. I was recently in Singapore using a SingTel SIM, and the busy tone would come out the speaker. When I switched to a M1 SIM (also in Singapore, blasted SingTel does not allow data on prepaid!), I did not have the problem anymore. I also did not have this when using SMART prepaid in Manila or when using DTAC prepaid in Thailand. Also, I was using the stock TyTN ROM at the time. I have since switched to 1.35, but I have not had a chance to travel yet to see if the new ROM fixes the issue.
Same here. Really annoying.
Any solutions, guys?
Here is a fix, HKEY_CURRENT_USER/ControlPanel/Sounds/BusyTone and change the wavfile for a quieter one, I use the busytone.wav file which i think gets installed withe skype ( i am not quite sure where it is originally from, just found it in my windows directory).
Or you can just remove the letters from the 'script' entry there - as I posted earlier today, which will disable it completely.
I don't know if this has been asked/answered but when i dial a phone number using the keypad the sound of the keys goes through the external speaker on the phone- is there a reg edit to make dialing key sounds go through the earpiece and not the speaker?
Thanks
I have the busy tone problem with my O2 trion. I use the workaround of nathanlock and it works great. I also contacted HTC about the problem. They claim that they have never heard about it.
touch tones and busy tone really loud
I have the same issue. i'd really like to fix both. the busy tone is extremely loud, and the dialing tones let everyone in a 10 cubicle radius know you are making a call. I have a love hate relationship with my 8525. love the things it can do, hate the things it sometimes does....
found some sound keys for the dial buttons in the registry, but nothing that looks like volume settings for them.
I have the same issue! it was really anoying... not anymore
tone problem
Nero would you like to explain how you solved the problem
I'm also having the problem with the tones coming out of the speaker when dialling. Additionally when i push the red/orange phone button the phone makes a high pitched sounds from the speaker.
I really dont remember either of these problems a couple weeks ago when I finished properly flashing it. Some one mentioned skype. I did recently install that.
Same here. Strange problem.
workaround update: change "Script" value to "ap" for tone to play only once, and change "Sound" value to "busytone.wav" (comes in rom, at least for HTC TyTN) - it's not loud at all.
Keypad sound issue
I only have the keypad issue. I have looked around but have not been able to find a solution. I would like to have the sound from the keypad in the earphone not on the speaker.
Is this the way the tytn is setup or is it just the group here that has the issue?
Can your "Busy Tone" fix also fix the keypad speaker problem?
Softbank X01HT
HTC Hermes 200 - IPL 1.01 / SPL 1.40.Oli / ROM 3.24.0.4 / GSM 1.40.30.00 (WM6 LVSW Edition 2007/04/08) + Wifi update
I've solved the keypad issue by selecting "Off" in the Keypad combo box at the end of the Phone Setting Page.
I hope it helps.
Cheers
/Joseph
I not really sure where you set this option, keypad combo?
It may be me, but can you be more specific, please?
The option I've found is under Settings-> Phone
You may see three Combo lists: Ring type, Ring Tone and Keypad
For the Keypad you can have "Long Tones", "Short Tones" and "Off".
If you take the last one you won't hear anything when you press use the keypad for making a call.
/J.
Great got it, Thanks! How blind am I?
Solution to busy tone problem
I had the same problem regarding the busy tone going through the speaker. I also had the added aggravation that, after each time that problem happened, my calls would divert straight to voicemail until I soft reset.
Another problem I used to have was that if I had call waiting and tried to answer the waiting call, the phone would freeze and I would have to soft reset with the stylus.
I was using an SPV M3100 with the original Orange UK ROM in Spain, with a Vodafone Spain SIM.
I believe these are simply bugs in the early radio roms. They show up with unpredictable combinations of roaming or using different sims than those of the original ROM operator's.
I fixed both problems by upgrading my radio.
Hope that helps.
Hey all, im glad this site is up its been great finding what i can really do with my wizard!
here is he issue im having. the wizard has 3 different speakers and 1 microphone. 2 side speakers (used to play music, or speaker phone) and the 1 main speaker (used for hearing calls). none of the 3 work when im making calls, listening to music, alarms, or any of the "screen click" sounds and the microphone doesnt work on phone calls or note recordings. however, the one time the speakers do work is when i have an incoming call, i tried listening to see which speaker its coming out of and it sounds like all 3. the headphone jack still works so thats what ive been using. pressing the speaker phone button while on a call (that i cant hear) doesnt do anything, the UI doesnt show any change or switch to indicate its changed to speaker phone and the "speaker on" button doesnt change to "speaker off" like it used to.
originally i thought this was a ROM issue, i was using the manufacturer's ROM (cingular 8125, unlocked for tmobile service) so i followed the lovely tutorial and switched my phone over to the t-mobile 2.26 ROM. this had no effect, so I then upgraded to XDA's WM6 ROM and while i love this new ROM it still did not fix my sound issue.
im stumped, any help anyone can offer would be great. I wanted to post here before i crack it open to look at all the insides.
same problem!
I'm having the exact same problem! I just noticed the problem recently, when my phones alarm didn't sound. I'm running a custom cooked rom from mattk_r 318 kitchen, but I don't think the rom is the problem, as i am indeed still hearing sound from the head phone jack. I don't think the internal speakers are broken, as when a call comes, the phone rings, and the sound come out from the speaks as mentioned above!
Help!
dropped?
have you ever dropped your phone?
I have dropped mine a couple times and thats the only cause I can come up with. But this never seemed to be a problem until recently.
no major drop recently.
i havent really dropped it recently at all.and for some reason i dont think the hardware is the problem,because i tryed voice recorder,and it records my voice and i can play it
back through the headset.so that confirms that the mic and both spealers work (rings
when incoming call). i really dont want this to be the downfall for my wizard! is there
any key registry entrys for sound maybe that we could have a look at? btw my wizards a G4 if thats makes any difference.
please help!!
mine is a g3, if it were a software issue then reflashing should have solved it. right? i dont know enough about the internal workings of the wizard to know what a flash actually does.
?
Anyone have any ideas on what I can try?
Well, a flash is an OS upgrade/downgrade. It contains drivers, programs, registry settings, things of that sort. Sounds like your problem is hardware related, nothing to do with the OS itself.
I assume the warranty on that baby has already expired, so you're pretty much on your own.
Two options come to mind:
1. The obvious... buy another Wizard
2. The not so obvious... buy another Wizard with a broken screen and take all of its guts out and put them in yours.
A third option also exists... (ther's always a third way)
Mind you, this is for INFORMATION PURPOSES ONLY! In no way do I condone the below mentioned method.
Get a new line of service with Cingular and buy the Wizard to use with it. Exchange their boards, swap the IMEIs using the Wizard Service Tool utility found on these boards, cancel the line of service and return the "new" Wizard.
Sound issues
I have had a similar problem but located my problem to the microswitch which is in the headphone socket. Might be worth trying pulling the headphones in and out a few times to see if it allows the microswitch to release (if that is the problem?)
Steve
The wizard is magic
Some how my wizard seemed to repair it self. Its sound is working again...i didn't reflash or do anything special....weird. I think its because the phone had a good vibrate....ive got one of those speaker docks for the wizard..i put it in there...got a phone call and talked and stuff...but while it was in there (with the mic plugged it) it vibrated alot...maybe that flicked the switch mentioned above?
weird..this phone never ceases to amaze me. I just hope it doesn't happen again... because it appears to be emerging as a problem as the wizards get older?
Keep up the good work guys!
LOL!!!!!!!!! its so simple and yet so amazingly smart
wow, Steve you are the most amazing person EVER!
I put the headphone piece in about 1/10 of the way and slowly made a swirling action as i slid it all the way in, clicked the start button on wizard and i heard the "click" for the first time in a month!
Thanks!
I tried different options to get my sound back, no luck so far
Problem started after using the headset-connector to connect it to an FM-Transmitter.
After reading this thread, my guess is that the "micro-switch" is in a wrong position. So I opend my MDA, but can't find any "switch" in that connector.
Is there some more info about that connector, a connection-diagram perhaps ?
what worked for me was inserting the headset jack in roughly, robbing each side of the headset jack to try to hit the "switch". that might work for you.
Yes!!! Thank you a lot!
I have the same problem, no sound in my speakers, just vibrate and sound in handsfree. I figure out that this micro-switch could be the problem, but I haven't know how to solve it. Thank you once again, I love my SPV!! and this community.
Fixed!
Woohoo!
This problem just cropped up for me on the weekend.
Thankfully it wasn't long before I happened across this thread.
About a minute of persistent jiggling the microphone jack did the trick.
Thanks!
Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord
I posted this in the big NFSFAN thread but I think that has taken a new course towards WM 6.5 so this may get over looked.
Just something I've noticed re v1.31. I just upgraded from 1.18. (took me a while to bite the bullet and change to the touchflo.) It seems my voice command will not announce incomming calls. The ring volume does drop to allow for the announcement, but nothing is heard.
The settings are correct.
Announce incomming calls, not during free time only, and play through BT headset when available. Does not work through headset or speaker phone. Also does not work when set to announce through phone speaker only.
I've reflashed the ROM twice, and went back to the bell OEM ROM between flashes. Everything else works fine except the above. It worked fine on 1.18, and it works fine on my girlfriends Touch with the same ROM. The issue is the same right off the reflash with absolutely no other programs installed.
Can anyone offer some insight?
Thanks
BUMP
Anyone? I really miss it.