What are you guys using to flash read and write your SD cards for upgrading the PPCPE? What's the best?
I'm not sure if its the best but I does work and was cheap too ($14.00 at Fry's). PQI USB 5 in 1 Travel Flash P/N: FPT-D
HTH
Related
hi everyone,
i've just bought a m3100 and wanted to by an mini SD card for it. just needed some advice. will a 4gb mini sd card work? can i use a micro sd card?
thanks
uklarka said:
hi everyone,
i've just bought a m3100 and wanted to by an mini SD card for it. just needed some advice. will a 4gb mini sd card work? can i use a micro sd card?
thanks
Click to expand...
Click to collapse
Hermes devices only use micro sd cards
Mike
Thanks for that Mike. Can you just clear one more thing for me please. I can only use a 2gb micro sd card with the M3100 or will these new 4gb micro sd HC cards work?
uklarka said:
Thanks for that Mike. Can you just clear one more thing for me please. I can only use a 2gb micro sd card with the M3100 or will these new 4gb micro sd HC cards work?
Click to expand...
Click to collapse
They are not long out and I have not heard any feedback yet. You could have a look around in the Hermes Accessories board it was being discussed there.
Mike
Thanks for that mike
4GB Micro !!
I just tried one in my Cingular 8525. The device reads 1 GB only. I thought I had a defective card, so I replaced it with another but still it read 1GB. Then I placed a 2GB. It read it as 2 GB. ( 1.93 GB ). Not sure why it couldn't read the 4 though.
asfoor said:
I just tried one in my Cingular 8525. The device reads 1 GB only. I thought I had a defective card, so I replaced it with another but still it read 1GB. Then I placed a 2GB. It read it as 2 GB. ( 1.93 GB ). Not sure why it couldn't read the 4 though.
Click to expand...
Click to collapse
This could be because of the way the card is formatted.
I would format using a card reader in a PC to:
FAT32 using 512k sectors size.
if problems remain I have seen a suggestion that you could partition the disk to have 2 X 2Gb partitions.
Mike
I've read a lot around and I do not come to conclusion what type miniSD card is most appropriate for my Trinity.
Currently I have 4GB Albatron x60 card which cause me a certain amount of troubles -- sometimes after soft reset some of the contents are missing.
However I want to buy new card (4, 6 or 8 GB) and I don't know which one to choose.
I've read some articles for SDHC cards and I've come across several SDHC patches for WM6, but I'm not sure which one to pick. I even don't know whether SDHC is appropriate at all for my device.
Please ... give me some advise for this matter.
SanDisk
I'm using a Sandisk 8gb micro SDHC card with an adapter Micro/Mi,i from Kingston.
At first runnig under WM5 only recognised 4gb , made an upgrade to WM6 and... card is working perfectly.
So good luck.
No issues at all ? I'm using WM6 too.
What is your ROM version and vendor ... if it is cooked it may be patched for SDHC.
I'm still using the stock Dopod WM6 ROM.
Why my Htc Tytn ( Herm200) not detect my new Microsd Card Sandisk Premier 2Gb??
I use the program Storage Tools, but did not detect the card.....
The Rom i use is Schap's 4.31
Help please.
Kvin said:
Why my Htc Tytn ( Herm200) not detect my new Microsd Card Sandisk Premier 2Gb??
I use the program Storage Tools, but did not detect the card.....
The Rom i use is Schap's 4.31
Help please.
Click to expand...
Click to collapse
I'm using also using a 2Gb microSD card without any issues. Try reformatting your card and check again. It could be a compatibility issue. Do other brands work fine?
check first with a smaller capacity microsd
to ensure slot is working fine
then if its working try to reformat your card if not you probably have a damaged card reader on ur hermes
btw im using 8GB Sandisk microsdhc with official att wm 6.0
hi
i just bought a new 2GB Transcend MicroSD Card
with mini sd adapter.
but the wizard doesnt read the card
(fat32 formated)
if i try the card in a cardreader its working ,
my old 512mb mini sd card working is working in my wizard..
any solution?
XTRANGE...
Try to use a ROM that contains the app format storage and try to formatt... but i think it may recognize it first... nothing to lose if try... or reformatt it on a XP built in with card reader.
Panasonic makes a free sd formatting software that it claims to strictly adhere to the sd standard:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
You could give it a shot, don't see how it could hurt
Just bought a 16GB Micro SD Card, it is not recognised by HD (saying not installed, my old 8GB card is working fine), but the card is working very well in the other phone (LG) and my digital camera.
Any professor could help? Thanks
Just a wild guess that it's an SD-HC card. Certain types of cards will be recognised after some registry tweaks.
*Which ROM are you using? - These tweaks may or may not already be applied
*Does your computer recognise the card? - Could be a faulty card
*Have you run the Card Format utility from within the phone? - All cards need to be formatted first
As always remember to search the forum. And PLEASE do not double-post. You will be lucky if anyone replies to either this thread or the same thread in the accessories forum.
Thank you.
I bought the 2nd class 6 16GB card which is working well. The 1st one is going to be used in my digital camera.