I tried to downgrading my MDA from 3.17 (with the latest RSU as well) to 3.14 but suddenly the connection between PC and MDA was failed and the MDA cannot connect to the PC again. The ROM downloading scheme was on the scheme so I then hard reset the MDA to see whether I can get back my OS.
No...it didn't, it just shows some lines on the scheme and no matter how many times I hard reset it, still not working. So I think my MDA is dead now.
Can you still enter the Bootloader mode?
(Hold power button while soft-resetting...)
Unfortunately not.
It only appears 2 empty boxes and a lot of horizontal lines.
Thats the end of this two month's old machine.
XDA developer Peter Poelman said:
Can you still enter the Bootloader mode?
(Hold power button while soft-resetting...)
Click to expand...
Click to collapse
same thing happened to my xda. but I can get on the wallaby bootloader mode (Hold power button while soft-resetting...).
XDA developer Peter Poelman, what's the next step to make? Thanks for any help you'll be giving me.
chatstix said:
same thing happened to my xda. but I can get on the wallaby bootloader mode (Hold power button while soft-resetting...).
XDA developer Peter Poelman, what's the next step to make? Thanks for any help you'll be giving me.
Click to expand...
Click to collapse
Use the SD-card method to get back up and running. See here for details.
Hi,
same problem, but after starting the bootloader (V 5.14) i get a gsm-error.
How can i get my XDA running?
Thanks
Miwu
XDA developer Peter Poelman said:
chatstix said:
same thing happened to my xda. but I can get on the wallaby bootloader mode (Hold power button while soft-resetting...).
XDA developer Peter Poelman, what's the next step to make? Thanks for any help you'll be giving me.
Click to expand...
Click to collapse
Use the SD-card method to get back up and running. See here for details.
Click to expand...
Click to collapse
My bootloader version is 5.17. Will running the xdatools against this version ok? Because I read on your site that there's some issues with the 5.17 and up version. Thanks again for the quick reply.
I read a information from http://xda-developers.com/XDAtools/ as below:
"Presently, XDAtools deals with the ROM of the PDA side of your device only, it does not allow you to do anything to do with phone ROM upgrades (which are also called 'Radio Stack Upgrades' or RSU)."
If XDAtools doesn't support phone ROM, how we can re-flash the phone ROM by bootloader v5.17?
Thanks !
I was under the (possibly mistaken) impression this was a ROM problem. If not, the bootloader method will not help (but it won't make things worse either). We have no means of helping people with RSU problems. A number of fixes exist, and from the looks of it, each of these fixes helps a subset of the people in trouble, so try whatever fixes float around in this forum, I guess...
Sorry...
That's OK... thanks XDA developer Peter Poelman for quick reply !
I got one more question, how I can flash the CE ROM from bootloader v5.17 using XDATool. Because, I would like to flash back to O2 xda original PPC2002 before go there for repair.
p.s. I got the original ROM v3.17.3 from Jeff's kitchen and XDATool with Card Reader.
How I can use the SD method to flash back my xda to original PPC2002 ?
Thanks again !
Related
Have somebody the new version or any other PPC2002 ROM online as an .nb1 file to flash it with SD card...
The exe file doesn't work 4 me
I've PPC 2003 and the FlashProgy crushed always...
May be somebody could [email protected] it to me???? :?: :?: :?:
email at my profil...
Thanx!!!!!
hi supergrobie,
does your bootloader still work, because mine does not and it sounds like you have a similar problem to mine.
Rico
No
at this minutes my xda lives again!!
I've not overwrite my bootloader and with xdarit (old)
XDA Def. V1.2 is on my xda :lol: :lol:
I've no problems know...
Thanx XDA developer...
I save my dead Xda !!!
When I was upgrading to 2003 thru the boot loader, my xda was "dead", no respond with hot or cold reset. No bootloader also. By accident, I hold the power button and pust the cold reset button (small hole), then I push the power button again, the boot loader was back !
I retry the PC2003 again and my xda was dead again. I repeated the sequence and the bootloader works again. I then downloaded the zip version from Jeff site, and PC2003 come to life. I guess the full .exe version some how hangs the xda but the zip version works.
I am not sure what I did make any sense, I reapeted 3X in all, may be it is helpfull !
Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out
one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)
guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.
i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest
update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??
You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.
Where can i get a radio stack rom...???
Click to expand...
Click to collapse
where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???
Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:
get a radio stack from here
http://lumpistefan.dyndns.org/tools/
My O2 XDA is quite old and I have been running a revised WM 2003 ROM 4.01.16 Eng with radio 4.21 for ages.
I want to put back the original rom but can’t get to the bootloader! I have tried every combo of Soft reset and Hard while holding down the power button excreta but noting. What am i doing wrong ? I have a ROM made by XDAtools (i thnk its ok)
Just to add the ROM is T-Mobile - ps its the one you cant upgrade with .EXE PLEASE HELP
Just to add the ROM is T-Mobile - ps its the one you cant upgrade with .EXE PLEASE HELP
Using activesyn?
Harry, have you tried using the bootloader patch in xdatools, if you have xdatools installed, go to start on your desktop then programs/xdatools. An option to fix broken bootloader should be there.
Harry, have you tried using the bootloader patch in xdatools, if you have xdatools installed, go to start on your desktop then programs/xdatools. An option to fix broken bootloader should be there.
macihne gone now - ive now got XDA II Tnx for all help
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too