Related
Wazzzzzzzzaaa???
This is my first C# util!
It facilitates ExtRom update process. All you need to do is to put your cab files to Ext and run this utility, then the utility will create Config.txt at Ext with all cabs specified as "CAB: path2cab". If you need to get your original Config, then check ConfigOld at Ext
C# Programmers let's unite!!! ))
ps: the utility is not verbose one, so you won't see any messages & lame stuff. If you see something, then there is a problem
that's good boy! will try it l8r..
THANKS!
Man, wher z feedback?? Did u try it?
Yo,
boobee said:
that's good boy! will try it l8r..
THANKS!
Click to expand...
Click to collapse
Boy, hope you finaally tried it! And try this one also. This is my 2nd C# util
Shortly what it does:
UnZips your files with consecutive registry values (reg V4) import and splash writing
It means that you can zip all your files to one file called Setup.zip and place it anywhere (storage/ext). After hard reset, the utility is called and it extracts all your files and restores your favorite registry settings (saved to Setup.reg) and writes your splash.
btw: read za manual !
ps: the concept is the same, if u see somethin' then there is a trouble
Re: Man, wher z feedback?? Did u try it?
Attention!
The file was re-uploaded, so there mustn't be any CRC errors now
System Requirements
Regarding system requirements, the program needs old version of ER\Autorun.exe that understands ER\Config.txt
Program was not tested on XDA1! It was partially tested (w/o hard-resets on XDA2 / 1.72TM
Version 1.1
Wazzza!
Here is a new version of Restorator utility. The new features are:
+ now it deletes content of \My Documents;\Windows\Start Menu;\Windows\Startup folders (as people wanted
+ TimeZone offset is not resetted anymore
Note:
Make sure you have prepared your customized Start Menu (!!!) and Startup (!!!) folders, otherwise you won't be able to see Programs after hard-resetting your device. Please, check the attached sample to prevent yourself from having problems with this utility or use version 1.0 that don't delete anything
Umm... could anyone translate this into English for me?
I don't even understand the title of the thread.
In another thread, SP says that one of these downloads will retrieve data back on hard resets. Sounds like a useful tool, if only I understood what the hell these posts mean. :lol:
For Ben
sublimatica said:
Umm... could anyone translate this into English for me?
Click to expand...
Click to collapse
Here we go...
(assuming that you downloaded 'RestoreItV1_1_PPC.ARMV4.CAB' & installed it to your device)
This program is designed to restore your files, folders and registry settings from a ZIP-format archive and it can also write some splash screens
For this purpose, you need to make a ZIP-format archive with files & folders you want to get restored after hard-reset. Just run your favorite pocket zip archiver (for instance PocketRAR) and archive those files & folders that you want to see after hard-resetting device. Name your archive "Setup.zip" and place it to one of the following places: storage, storage card or extended rom.
Before doing further instruction make sure you have unlocked your ExtendedROM using ExtUnlocker.
If your rom is unlocked try to run the utility from \Storage\RestoreIt. If you had no messages after running it, then the utility installed itself successively. And your files & folders placed to 'Setup.zip' will be restored on next hard-resets.
If you're interested in restoring registry settings, then you need to get pocket registry editors that support exporting/saving to .reg files. After saving your favorite registry settings you will need to combine them to one .reg file and name it 'Setup.reg'. Then, you will need to place it to your archive's root folder (aka '\') So, you will have a file 'Setup.reg' placed to the root folder of your 'Setup.zip'. That's all folks
I strongly recommend you to see sample 'setup.zip' & 'manual.txt'
DON'T FORGET TO PUT YOUR CURRENT '\WINDOWS\STARTUP' & '\WINDOWS\START MENU' FOLDERS TO YOUR SETUP.ZIP!!!
You're welcome to ask me questions anytime!
Aaah, OK. That makes more sense
Sounds like a handy little tool then. Might have a play later.
Thanks, SP!
RAR-support
Is there anyone who is interested in rar-support for restorator?
Attention: Restorator v1.0 & 1.1
Attention: Restorator v1.0 & 1.1 are originally supported by I-Mate 1.72! All you need to do here is to use Extended ROM unlocker prior to running the utility
Feedback
Any feedback so far?
SP,
Restorator seems like a winner!!! I have been hitting my head on the rocks for a while trying to script a recovery using nscriptm as a scripting tool to call cab files which I keep on a storage card. Looks like using your tool a lot of the tedious scripting can be simplified by simply copying the files where they need to go. The challenge is knowing exactly what to copy & where... Is it possible to add the ability to call CAB files to your already excellent utility?
I am imagining putting all the CAB files in say a folder like \CABs in the Setup.zip and then having Restorator calling them one by one after finishing off with all else that it does. Can this be done? Additionally can you add ability to call registry imports at two points? You may wish to call registry import at the beginning and once more at the end after all cab file execution has been completed. This would be useful to restore application settings etc which the cab execution would overwrite to default. You would obviously need to keep two .reg files in the zip file. Does this make sense?
Thanks once again for all your efforts. Regards
Hi Mate
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
SP, thanks for continuing to work on this utility. I am waiting eagerly for your next update. I will set it up and test it with a hard reset so we can see real outcome. Let me know when ready please. Thanks
Re: Hi Mate
SP said:
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
Click to expand...
Click to collapse
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Re: Hi Mate
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Click to expand...
Click to collapse
Unfortunately I don't have an XDA 1 device at my disposal and I'm unfamiliar with its tech info.
What happens when your xda1 is hard resetted? Does it install cab files? or does it run any configuration software?
If there is a such software (on XDA2 it is autorun.exe placed at ExtendedROM), then you must specify in the runner (which starts on hard-resets) the call to the restorator utility
Looking forward to assist you in porting restorator for XDA1 devices
Cheers
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Restorator V1.2
k_kirk said:
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Click to expand...
Click to collapse
Sorry for the delay...
I'm having lack of time now, thus I couldn't test it very well . Just let me know if you found some bugs...
Now you can create "\CABS" folder and place your cabs there. They will be processed after extraction and before registry import. So, you don't need to have two .reg files then.
I'm looking forward to your new ideas!
ps: another attachment is a set of registry settings splitted by .reg files. I'm using them to get my setup.reg. Just change what you need, delete some of them and run "make.bat". It will create setup.reg with all your settings.
btw, check out "Usher_-_Yeah_[44k].wma" & "Maroon5_-_This_Love_[64k].wma". Home-made ringtones ;-)))
for those who hadn't used Restorator before. !!! DON'T FORGET TO PUT YOUR "START MENU" & "STARTUP" FOLDERS TO THE SETUP.ZIP !!! AND READ DA MANUAL!!!
Cheers
SP,
I tried the Restore-It utility today and found that the earlier functionality of copying files & importing registry etc from setup.zip works quite well.
The \CABS folder was also restored onto my device so I guess thats an indication that my setup.zip file was contructed properly. I am sad to report that none of my cab files were triggered by Restore-It though. I think there is a small bug thats holding back this behaviour.
Your kind assistance to check & correct this will be most appreciated.
Thanks & Best Regards
hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.
http://forum.xda-developers.com/viewtopic.php?t=15176
as far as i understood the merged rom has an older version in it, but I don't have it on my xdaii.
If it has installed itself on your himalaya, uninstall instructions are in the thread
thanks M4io
but neither winzip nor win rar recognized the file i downloaded on the thread you have posted.
wnen i click on the download it shows.
(download the 1.34 mb file, 'download PHP').
now what i want to know is what is PHP?
and why dosen't the winzip & win rar recognized's this cab file.
thanksin advance.
jaykumarr said:
hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.
Click to expand...
Click to collapse
Start>Programs>File Explorer>My Device>Extended Rom
Install Caller_ID_W..
PHP is a language which runs on the webserver. so when you click on download.php you actually start a service on the server, which gives you the requested file.
now these CAB-files are pocketpc cab files ad are kind of setup programs for PocketPC , so you have to copy the CAB to your pocketpc and execute it there.
You can execute it by putting it in your extended rom, modify the config.txt and hard reset (I hope you know what hard reset means/implies)
or simply by tapping on it in PPC file explorer. In this case the CAB will disappear after installation. But if you have a previous version of Caller_id installed, you best uninstall it first : by editing the registry as explained in the forementioned thread, deleting as much files from the previous thread as it allows you to, soft reset, and delete the rest of the files.
I sure hope you understand all this, because if you don't know what php is, don't know what PPC CABs are, then I would advice you not to mess around too much with your PPC internals.
M4io
i know what is cab file.
but i wanted to know weather the file is in zip format cus win zip doesn't recognize it and even when i paste it on my ppc it doesn't install it simply says (there is no application associated with ''caller_id_wwe'' run the application first,then open the file from with in)
sounds like something corrupt during download
clear your internet cache and download again, don't unzip/unrar it, just copy the complete CAB file to your PPC
almost everything is installed with cab, so it would be weird that no association exists. Or during the copying to PPC maybe the conversion went wrong.
I'm really guessing now, just keep trying.
The WM5.0 emulator is working on my PC.
Japanese Emu, S-Chinese emu, and T-CHinese, emulator. also english.
i want dll, mui, exe files from them, to make Japenese or chinese WM5.0
on my Himalaya with english WM5.
Hope someone can help to dump it or make dump tool.
i have a dump tool my friend made for WM2003 emulator, so not worked for WM5.0.
if need emulator image from WM5.0 SDK, i will upload i them.
Please help!
ms would be pretty stupid if they made it possible for one to unload a real rom image from an enulator
as far as i know then all roms have to be 100% made / "compiled" for each pda to work
so unless that emulator was using an 100% image of the rom for the device you want to upload it to later
i doubt it would work
Rudegar said:
ms would be pretty stupid if they made it possible for one to unload a real rom image from an enulator
as far as i know then all roms have to be 100% made / "compiled" for each pda to work
so unless that emulator was using an 100% image of the rom for the device you want to upload it to later
i doubt it would work
Click to expand...
Click to collapse
thanks for your comment,
but plese dont worry i want just take the resourcese from dll or exe, to make mui files to pretend interface of OS.
i used this way to make japanese OS on my Blue Angel with PPC2003se.
Mr, Mamaichi teached this way to me in the past.
for your refference
http://asukal.seesaa.net/article/6114096.html
http://asukal.seesaa.net/article/5052836.html
Japanese site, but you can see the JPGs
ooh got a bit confused then i guess
Asukal
You can dump the ROM image from WM5 emulator with a normal dumprom tool, but first you need to convert image from B000F to the NB format with the command:
perl splitrom.pl PPC_USA_GSM_VR.BIN -wo ROM.BIN -oe 0x82000000
and then dump it as a normal rom:
dumprom.exe ROM.BIN -5 -d C:\ROM_DUMP
I've tested that on english version of emulator.
you'll need splitrom.pl script and a new build of dumprom tool from itsme.
Mamaichi>>>
thanks for your information!
i will try it!!
Thanks Mamaich!
after i got your private message and done it!
i got dumped roms files form mnu!
@Japanese OS image
@Simple chinese OS image
@Smart phone (WM5) japanese image
after succesfull them, the splitrom have error on following emu image.
@English OS image
@Traditional OS image.
i dont know why???
may try to restart windows system and try again
any way, i got it!
thanks!
hi Asukal,
can you please give me the links to your emu images?
i'm too lazy to search.. ;o)))
thanx
buzz
Yes, why not!
Here it it!
http://www.asukal.jp/ROMs/PPC_USA_GSM_VR.rar
20MB <not dumped yet>
i could dumed english image also.
here it it!
http://www.asukal.jp/ROMs/SDK_ENG.rar (17.32MB) dumped files
i dont know why i couldnt up load this as attachment???? :shock:
so i must use my own server :?
Asukal said:
after succesfull them, the splitrom have error on following emu image.
@English OS image
@Traditional OS image.
Click to expand...
Click to collapse
what is the error text? I've dumped english ROM without errors
to mr,mamaich
i got successfult to dump english SDK emu rom after that.
But i took Bin from SDK in another computer.
I guess Bin file which i tryied dump at beggining was broken or have some problem??
or i have already opened and drove this emu image on the Emulator many times so it was not default already.
i have never tried again about T-CHinese Bin.
i think it can be possible if i took out another T-Chinese bin from another SDK.
the error text was...... cant remember exactry because i left that computer coz i am trip in europe now.
maybe.....
This image files has incorrect(or invalid) boot image.....or some like that.
sorry my late rplay.
I am in Germany now and have to visit Milan and paris after here.
thanks
MUI's in wm2005
Hi, everybody!
I followed this thread and successfully created some MUI's for 2005 (I think) but I can't get the device to load them. I tried changing the registry settings (worked for 2003se) but it didn't help.
No changes I made are visible and the files can be deleted, so I guess they are just ignored for some reason.
Can anyone help please :?:
Thank a lot!
that is true, also cant do that.
keep on studying now.
Something different from WM2003!
MUI security signature?
Hallow again!
I think the problem might be with the digital signature Microsoft now requires. :idea:
Also I made the following experiment:
I put the resources in 2003SE MUI officeres and btres and it did load, but when I tried it with shellres or coresres it didn't work.
I think it won't load unsigned system files…
Any ideas?
Any leads will be greatly appreciated!
:lol:
Re: MUI's in wm2005
levenum said:
Hi, everybody!
I followed this thread and successfully created some MUI's for 2005 (I think) but I can't get the device to load them. I tried changing the registry settings (worked for 2003se) but it didn't help.
No changes I made are visible and the files can be deleted, so I guess they are just ignored for some reason.
Can anyone help please :?:
Thank a lot!
Click to expand...
Click to collapse
because on 2003, files are copied to RAM. on 2005 are used directly from ROM.
buzz
Re: MUI's in wm2005
buzz_lightyear. 2005 can also load dlls to RAM, for example when they are started from storage card or built-in storage.
There maybe one more reason. The DLL may be not loaded if your resource DLL does not have some resources that the original DLL has. Or if your DLL is somehow incorrect. You should make a program that calls LoadLibrary() for your MUI DLL and check the error code if it does not load.
For MS Smartphones there was a registry key that allowed to run unsigned applications. Maybe the similar method exists for WM5.
Asukal. I've attached the program that would try to dump shellres.dll of your device to \storage card\shellres.dll. I've tested the program only under emulator, on the real device it may crash.
If it would not crash - you should look into the produced DLL to examine its resources. This dumper would produce DLLs that are unable to load (they have no relocations information), and their size is larger than it should be, but resources should be extracted correctly.
PM me if the program crashes. And it probably would crash. I'll try to do something.
Mr,Buzz and Mr,Mamaichi!
thanks your comments, and i have just back from Paris and too tired to try mamaichi`s testwm5.exe
aftre sleep while, i will try it! (i dont afraid crash! glad to be sarifice!
I'd recommend you to try this tool - http://forum.xda-developers.com/viewtopic.php?t=23520&start=25#152044
To mr,mamaich
The first attached testWM5.exe dumped only dump.dll(?)
the second TESTWM5.exe of the link can extraxt installed files also, and RAM files can be dumped.too.
but not crashed.
i will remake MUI file and test it!
Thanks!
VipMSCRexe is a utility to run MortScript without Assigning .mscr extension to MortScriptexe.
How to Use it
Rename exe to your scriptname.exe e.g if your script name is sashimi.mscr then rename this VipMSCRexe.exe to sashimi.exe
This utility will first find MortScript.exe in Current directory and Sub directory under it
if not found then look in \Program Files and sub directory
if still not found then look in \Storage Card\Program Files
if still not found then look in root directory.
Once MortScript.exe found then find <exename>.mscr in same above fashion.
Once script found then execute command like MortScript.exe scriptname.mscr parameter1 parameter2 etc.
Advantages of this Utility
you can have only one installation of MortScript and may be all your script in one another folder.
Now if you want to call any of script copy this exe and rename to your scriptname.exe
Basically if you have script name sashimi.mscr then copy this exe and rename to sashimi.exe and put it in any folder
Root or storage card any where and run exe will execute your script you do not give any path or tell where it located etc.
To me MortScript.exe only support one parameter where as this Utility support multiple parameter
Version 1.0
Initial version
Version 2.0
Make changes so that Arguments are passed properly
Performance Improvement using config file
Version 3.0
Performance and Special Chars Handling in Mortscript's Path
Version 5.0
Performance improvement Using registry values
Version 6.0
Fixed Langeuge issue
Fixed Error Handling Routine
Very interesting. I have several uses for this right away so I'll download it and test. Many thanks for sharing!
Just want to note that although this is a fine tool (I'm using it for SASHIMI), if you DON'T need to pass parameters to your program you would be better off to use a renamed Autorun.exe file from the MortScript download.
The only reason I say this is becuase of the delay that VipMSCRexe has when locating/opening the script.
But, if you need to pass parameters to your script, this is the tool!
Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error
hurtavy said:
Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error
Click to expand...
Click to collapse
Don't work in my PC "System.ArgumentException: URI formats are not supported"
Only Supported for Pocket PC's not for desktops
In smartphone with WM6.1 is the same error
SmartPhone and WM6.1 I am not sure you have smartphone or Wm6.1
Can you please let me know which phone you have?
I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...
Do you have .netCf 3.0 installed?
hurtavy said:
I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...
Click to expand...
Click to collapse
Do you have .netCf 3.0 installed?
v3patel said:
Do you have .netCf 3.0 installed?
Click to expand...
Click to collapse
No. Only .NETcf 2.0
I do not have smartphone to test but can you try changing your languegue to english and then try. I just want to see is it languege problem or somthing else.
Posted Version 6.0
Posted Version 6.0
v3patel said:
Posted Version 6.0
Click to expand...
Click to collapse
You Can make it run in Win-CE ?
Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.
blue1311218 said:
Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.
Click to expand...
Click to collapse
Me too, I know that you may have heavy code inside to do like path checking & etc., may be another version with just execute the .mscr in same folder as MortScript.exe & <VipMSCRexe>.exe ?
Many thanks for this great app.,
Thanks, that the thing I need~~~
Hope you can me help
Hello,
i have program in the startup of my WinCE 5 Falk GPS. After the Hard Reset, has a Error. And the text:
Script \Temp\0084Script.mscr not found, waiting for existence (Storage Card not Initializied?)... After 3 sec. my falk stops.
Sry for bad english, im german.....
I try to create a program which consists of
.asx files (to show online tv channels),
.lnk files (shorcuts to the .asx files) and
a .dll file which contains only some .ico files (icons of the tv channels).
I added all these files to a cab using WinCE Cab Manager and tried to install it on my ppc. So far so good. The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Although I have no idea about computer programming, I have created many cab’s with WinCE Cab Manager for skins I have created for several programs. Anyway, I realized that the problem occurred due to the .dll file, since this is the first time I add such a file in a .cab.
I created my .dll file using a .dll from another program which had only icons in it, as well. I deleted them using Restorator 2007 and I had an “empty” .dll sized 4KB. Then I added my icon files using XN Resource Editor.
I searched the Internet to see what might be the problem with the .dll and I found out that I have to “register” my .dll file. I really have no idea what this means but it needs to be done. I also found an option in WinCE Cab Manager for “self-registering” file, but it didn’t work either.
So, the question to you dev guys is how can I register my .dll file, or should I create it from the beginning with another way?
Please help! Thanks in advance!
sorry to repost but it seems that posts keep coming in this forum and this thread is already in the second page and I'm afraid that noone will see it and reply to it. By the way, is there any special sub-forum for such questions?
This may help. I use his instructions to edit existing DLL's
http://www.modaco.com/content/i9x0-...88904/lisbian-taskbars-for-i910/#entry1023568
It will unsign the dll which will probably fail on your custom dll but it should sign it when you are done editing.
NilsP
Many thanks for your suggestion but unfortunately it didn't work for me.
As you said, this is mainly for resigning already signed .dll files.
Any other help will be appreciated. I can attach it here if anypne is willing to help. Or just tell me the way. Thanks!
I deploy a few dll's with my app, without any problem. If the installer complains about the location, what did you specify where it should go?
There are 2 approaches to solve this problem:
1.) If you have a private key to match a certificate in the device's certificate store, sign the .dll and .cab with this private key and it will be installed with elevated privledges, and be successful. To facilitate this you can install the "SDK Certificates" - and sign with the matching private key (you should be able to find these on a search, term "SDKCerts" or similar)
2.) Look for an "Application Unlocker" or other security reduction tool, run it, and you should be able to install the cab. On this note, if you check here, it will give you a more technical overview of the security policies. You want to change 4101 / 0x1005 to "SECROLE_MANAGER" (8) - which tells the system to install it with elevated privledges. Also make sure 4102 / 0x1006 is set to 1 to allow unsigned applications.
6Fg8
I don't believe that is the location I specified that causes the problem because when I deleted the .dll file from the .cab, it was installed properly. How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Da_G
Thanks but both approaches seem very complicated for me!
So, will I need Visual Basic in order to do this or is there any easier way? Can anyone sign the dll for me?
angelos_cy said:
6Fg8
How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Click to expand...
Click to collapse
Yes with programming, C++ or .net. Never had any issue with signing. I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
6Fg8 said:
I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
Click to expand...
Click to collapse
I have sent them to you by pm. They are not secret at all but I will create a "program" (wannabe ) with that dll and I want that program to be a surprise for users of the forum where I'll post it. I may post it on xda too, but it's nothing important.
Many thanks!
angelos_cy said:
The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Click to expand...
Click to collapse
This happens because you've changed resources in signed file, which changed file checksum and invalidated it's signature, and Windows installer refuses to install file with invalid signature. But it won't refuse to install this file WITHOUT signature at all - so use unsigner (search for it on XDA) to remove signature completely; if you encounter error, try to remove signature from original (unmodified) file, and then change resources in it...
6Fg8
the_ozyrys
Thanks to both of you!
6Fg8 has created and signed the dll for me and it finally worked, but I also tried the_ozyrys' method and it also worked.
So thanks to baniaczek too, since he created the unsigner.exe.
Everything worked fine with the dll. Now the cab is installed properly.
However, I have another problem. Just after the installation of the cab on my ppc, it seems that the device freezes for about a minute. This is propably because my cab contains a lot of shortcuts (.lnk files) that go under Programs folder.
So, I would like to ask for another favour, if it's possible. As I said I intend to give this cab to others too. Since this delay can make them believe that my program has freezed their device, I would like to make the cab restart the device just after installation and after uninstallation as well. I think this is made with the "Setup.dll" which I don't know how to create.
If anyone knows how to do this and has the time for it, could you please create this setup.dll for me. If the cab is needed to do this, just tell me to send it to you.
Thanks in advance!
Anyone? Plzzzzzzz!
If you want to sign .dll or .exe u can use the apps posted in the two posts below
http://forum.xda-developers.com/showthread.php?t=432041
or
http://forum.xda-developers.com/showpost.php?p=3530246&postcount=18
raykisi
Thanks for your answer but 6Fg8 and the_ozyrys already helped me on that.
My question now is how to create a setup.dll in order to make my .cab to prompt the user to restart the device after installation and uninstallation. If anyone can do it for me, I can send you the .cab which I alreday created and you can add the setup.dll with those functions.