Related
I have a 5.22 Bootloader and wondering how to back it up before downgrading to 5.15 from Jeff's tools.
Thanks. !
I tried with the XDATools but does not give option for Bootloader only ROM!
we made xdatools as safe as possible, no option to screw around with bootloaders.
I did create some other tools that you can use to backup your bootloader.
if you download these tools http://www.xs4all.nl/~itsme/projects/xda/tools.html
and run
Code:
pmemdump 0x80000000 0x40000 bootloader.nb0
that will save your bootloader in bootloader.nb0.
or you can use this pocketpc tool: http://www.xs4all.nl/~itsme/download/savebootloader.exe
it runs on your xda, and save your bootloader to a file in the root of your xda
Great thanks this works fine.... but when I run
pnewbootloader bootloader_v5_15.nb0 I get
Unable to find flash info offset, cannot disable bootloader writeprotect
I wish to upgrade to rom 4.0.x but would like to have a 5.15 wallaby before doing so. In case I need to downgrade back to 3.17.
Any help appreciated. Thanks. !
If their is no solution to this... Can I upgrade to 4.0.x and still be able to downgrade again later using another method!.
Hello,
this is the same error message I got when I tried to downgrade bootloader from 5.22 to 5.15. I was not sure if I am doing something wrong or what. I hope there is a fix to this.
Is the problem the Rom version or is it the 5.22 issue?
Use the old xdarit which gives an option to create a boot flash card. I have used this but as the developers warn this will "brick" your XDA if it goes wrong. My guess would be that you can downgrade to 3.17 on a 5.22 bootloader anyway. My advise would be to try that first because if it works theres no point in risking your bootloader and if it doesn't work you only have to reflash a 4.x image or try the old xdarit.
Richard
Thx for the reply, but the issue is how to downgrade to 3.17?
Program A is not working with this bootloader version (5.22) and I am not sure if XDArit will work with it.
Has anyone used XDArit with bootloader 5.22?
Perhaps I didn't make myself clear. I have bootloader 5.22 and have loaded 4.x images via flash using xdarit. I have also re-loaded bootloader 5.15 using the old xdarit to write a bootloader file.
Richard
Many thx Richard,
I do have an SD card reader (6 in 1) and I am not sure if this is the reason for the many errors I am getting when I try to use it. Recently posted posts say it could be.
I have also an image for the 5.15 bootloader.
Do I need the SD card reader to do the bootloader downgrade?
I have a six in one card reader and have the same problem you and many others have. In my case my SD card reader is disk six but I have to select disc 5 to get xdarit to see it. The bit to watch out for is to make sure that in selecting another disk it doesn't pick up your hard drive. The best way to be sure is to use the rom image tool to write a an image to your disk. Then using the old xdarit from the strat screen use the drop down list for the drives and you will see a load of data apear when you hit a valid drive you can recognise you have the right disk because you will see "Wallaby HTC" or simmilar. Then select write to disk and select 3.5k header and your 5.15 bootloader and write the file. when you put this disk in your XDA and enter bootloader mode it will offer to write it for you.
As I have said before I think you should try to write a 3.17 image to the disk first and try that. At the end of the day a corrupted rom is easy to recover from a corrupted bootloader = brick.
Also I have no problem with Program A and bootloader 5.22
Richard
No luck till now
Not sure what happened so far but I am unable to use my card reader now. Even when I connect it to a different laptop and insert an SD card from my camera, it says the card needs to be formated and even when I say ok format it, it says can't format.
When you right to the SD card using XDArit, my understanding that it will generate a file taht has the header required for bootloaders greater than 5.15. I am now ONLy trying to downgrade the bootloader. SO, the created file should be small. If you make this file available, would it be then easy to copy and pase it to a different SD card without using any tools?
Thanking yoy for your pateince
When you put your card in the SD card reader it is Windows that is offering to format it. xdarit does not need the card to be formated. If you put the card in and open xdarit can you see a string of data in the box ? If not use the drop down menu and try a different drive.
You can't (to the best of my knowledge) create a file that can be copied direct to the card because of the header required. i.e i can't email you one.
If you are having no joy reading from the card i.e you can't see the data as above try a different card perhaps the one you are using is duff.
Richard
It seems my card reader now has a problem.
I got an SD backup from an XDA that has bootloader 5.15 and the Rom CE
Now my Boatloader is 5.22 but this is what I am trying to get rid from. So, when I insert it in my device, it asks me if I want to press the action item to boot from SD. I am afraid that this will screw up my machine!
Is there a need that this file be written to the PC first then moved again to the SD card after checking the higher than 3.15 boatloader box?
Regards
If the backup you took was just the CE image then go ahead and restore the image. If you took a CE+bootloader image then you may want to transfer to your desktop and reload just the CE image but if your card reader is down I guess you can't do that. So if you have access to another XDA just redo a backup making sure you just have the CE image.
Why are you so determined to loose the 5.22 bootloader ? if it works on a 3.x image just leave it there its not doing any harm. If you are really nervous I will try a 3.x image on my XDA with 5.22 and let you know before you try on yours.
Let me know soon I live in Australia and its Friday night and the pub is calling.
Richard
You bet that I am nervous.
I would greatly appreciate your help in trying this first.
You can also e-mail me at [email protected]
Regards
I did try it and the Rom is downgraded now.
I still need to downgrade the bootloader so I can use XDAtools easily.
Will the same method work if I backup both the Win CE and Boot?
You don't need to HONHESTLY all the tools work fine on 5.22 BELEIVE me
If you must then yes is the simple answer but there is always a risk that it will go wrong and screw your XDA
Richard
Off to the pub now
OK got it all figured out!
I had:
A Rogers ATT (Canadian phone) running the Rogers ATT ROM.
Rom: R.20.x (don't remember) probably a 3.x
Radio Version: A.20.10
Bootloader: 5.22
Here are my steps. I will skip everything that went wrong on my journey and go straight to the point.
First I tried to use the new XDATools to upgrade the rom via Program A but with no sucess so used on method. !
NOTE: Their is not need in Canada to upgrade radio version cause the phone is already shipped with the latest. !
1- Used the old version of XDArit 1.0 to burn Wallaby Bootloader 5.15 from JEff's tools on my SD card (32Mb) with a Dazzle SD card reader
2- Inserted the card in my XDA and started the actual bootloader 5.22 and pressed action to download boot image.
3- Used XDATools (New version/product) to burn the SN40016wwe_vs.bin (see 4.0.16 rom is here post). (XDARit failed to get that one on the SD).
3- Inserted the card in my XDA and started the actual bootloader NOW 5.15 and pressed action to download CE image.
4- Did a soft reset and got T Mobile prompt... !
5- That's it phone works A1. !
Thanks for the info Yanick
So now u have 5.15?
What is SN40016wwe_vs.bin and where to get it from?
Is it specific to the ROm version you are upgrading to?
Hello,
I have to say I am kinda of lost now (not unusal :lol: )
I was thinking that the problem is in the boatloader but when I followed your method, my XDA seems to run 5.15 now.
Why an I still unable to use the XDAtools to write a new Rom file?
When I try to, I go as far as seeing upgrading in the laptop and on the XDA screem but then the connection (I use USB) is lost between the laptop and the XDA
When I try to upgrade the RSU (an excutable file), it goes as far as downloading the file to my XDA and restarting it to get a button saying start on my xda screen. When I press it I get the error message saying "als Failed " after 1% downloading?
If it is not the bootloader that was the problem, what is it?
Or am I having a non 100% functional bootloader now (5.15) or what?
:shock:
OK so you are running Bootloader 5.15...
Now download 4.0.16 ROM CE from
refer to this topic for download
http://xda-developers.com/forum/viewtopic.php?t=2354
Then Use XDATools to burn image on a 64MB or greater SD card. Then Reset your PDA using (RESET + POWER) combination with the SD card already in the machine and it should prompt you to download CE .. Press Action and here you go !
Hello,
can someone please help me?
Needed to unlock my XDA goes nobody could do it here ;-(
Crashed in the upgrading screen:
it wil take about 5 minutes ....
Has Wallaby Bootloader V5.15
I have already a ROM file NK.nb1 file from the ROMkitchen,
but i don't know how to get it working on my messed up XDA.
Have read a lot in this forum but really don't know much about programming ;-(
is it possible to make a copy from my working XDA (with XDAtools) and then replace the NK.nb1 file or something? and how can i get it into it?
read a lot about Bootloader but sorry don't know how to handle ;-(
If someone could help me -> THANKZ
Greetingz from Holland,
Marco
ok...
if you dont have an SD-CARD reader, get one!
then, from ROM UPDATE FORUM, find and download XDA TOOLS.
RUN xda tools.
it will ask you for source, (most likely C:\program files\RUU\ENGLISH)
and will ask for destination, since xda dont work, use SD READER
Start Copying to card
when done, insert card into xda
reboot via bootloader ( thats when you powerup with on/off button pressed and soft reset)
IT should detect that there is a system on the card, and ask if u want to install it.
press the ACTION button for yes. (thats the big silver button between the fone buttons)
thats realy IT
if you need more help... email me, or better yet add me to MSN messenger, if u have one. i'll walk you thru it.
thanks to a great warranty, i've practiced and tested alot of xda's
but now that i mastered it ( i think) i stuck to one
Thankzzzzzzz
It worked
Was a little late so i didn´t do it wright myself
Copied the file to SD
instead of doing it with XDA tools to SD
Works now fine.
Had some trouble with GSM and T/mobile card, but copied with XDA tools from working XDA to SD and now it works.
Keep this file on an SD card so now i can try to load ROM´s or upgrade to 2003 cause i can always put it back, so no risk!
Thankz Again,
Greetz Marco
I created one nb1 file using Jeff's kitchen, use XDATools write it to a SD Card, slot it into my XDA, press on/off button + soft reset key, bootloader screen (wallaby bootloader v5.17) appear, and say 'GSM OK', if press Action Key now will bring me to "Diagnostics" menu, if press Calendar key bring me to "Utilities" menu, if press Contact key bring me to "Flash Tools" menu, and if press Record Key bring will me to "USB Flash Mode", it didn't auto detect the SD card to allow me to flash my device, may I know where have I done wrong, anybody help? Thanks!
Sounds like the ROM imaged didn't make it to the SD card.
Do this test and report back on your results.
With the SD card still in the slot do a soft reset, if the image is on the card
your XDA should ask if you want to format the card.
HTH
It did ask me whether want to format the SD card.
Ok give it another shot but this time try using XDArit 1.0 to right to SD.
For more info. on XDArit visit: http://www.xda-developers.com/XDArit/
XDArit version 1.0 can be download from the software section at:
http://www.yorch.net
Just in case here is my how to use XDArit to write nk.nb1 or nk.nbf to your SD card (aka the Bootloader Method!)
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you’re going to use a .nbf file you’ll have to manually change the “Files of Type” to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You’ll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
HTH
&
Good Luck
Hi Qman, I followed exactly your instruction, but still the same wallaby bootloader screen, I can't see any sd download screen???
Sorry to hear that, I'm not to hip on wallaby bootloader v5.17 but
it works just with wallaby bootloader v5.15 works!
HTH
Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?
ycneosg said:
Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?
Click to expand...
Click to collapse
many ways to download bootloader to 5.15!
read the old threads you will see how!
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
use SD to restore your system if you have backup!
if you still have problem to get your phone life back, send to me I will fix it for you!
I forgot to tell you, I haven't got SD :evil:
I've been using .EXE
ritmo-unido said:
I forgot to tell you, I haven't got SD :evil:
I've been using .EXE
Click to expand...
Click to collapse
Wow!
I could help you to fix it, if you send it to me!
similar situation but somewhat different.
I cooked a rom in kalex kitchen and wrote it to my sd card with my t-mobile pocket pc phone connected to activesync. I then flashed the phone from the sd card but got a checksum error at the end. I did a hard reset but only got a blank screen. Right now I can access the bootloader but that's it. I don't have a good backup rom because (not thinking) I wrote over it with the rom from kalex kitchen figuring it would become my backup (it must have somehow been corrupt). I tried writing the rom I previously had on my phone to an sd card directly through a card reader on windows 98, windows XP and windows ME all with no success. Thus, I'm dead in the water. I have no clue why I can't flash to the card reader. I went through a ton of posts here but have not found the answer yet to get me back working. Does anyone have any ideas on this? I have no clue why xdatools and xdarit are not working (especially on XP - I know they should not work directly to an sd card on windows 98 but I tried anyhow out of desperation). Please help.
got it working
used xdarit on another pc running windows xp and successfully wrote the rom to the sd card using my card reader. i then flashed my phone using the bootloader method and i'm up and working again!
hello,
i'm using the xdatools to put the nk file on the SD card, but when i hard reset my xda, i get into bootloader 5.22 mode, it says "gsm ok", and when i press the action button i get into a test menu.
How can i load the nk file from my sd card? please help.
thanks guys.
Did you place the ROM on the SD card by browsing to your device (...) or using the drop down and choosing your SD reader or XDA SD slot?
I had the same problem until I used the drop down... if you browse to your card, XDA tools will not create a bootable SD.
i used directy dropping down the box to SD
When you use the drop down menu on the destination there should be a drive letter next to your card eg: F: 59.60M USB sd reader or similar, choose that and it should work.
do we soft reset or hard reset
well after loading nk.nbf file
do we soft reset or hard reset to get into bootloader.
also,
the drive letter in destination folder will come if u use card reader,
but if in expansion slot than it does not give the drive letter.
Hello
I did hard reset .
I am having this same problem...
I download to the SD card through the cradle, using the phone's expansion slot. I do a SOFT RESET, to get the bootloader, and all I get is a GSM OK message. If I hit the action button, I then get into the test menu.
Hello
Means you have no nb.1 on your SD card .
as per the instructions I've been following that have been listed in detail here on this site as well as the att siemens support forums, you are supposed to copy the nk.nbf file and use that with the OS Image tool...is this incorrect?
OSImage
I just installed new ROM from new ROM Kitchen .
http://lumpistefan.dyndns.org/
1) Get the file on your desktop ( download or ...I do not care)
2) Open OSInage
3) Source :arrow: Brows to your file
4) Destination :arrow: your SD card (where is it :?: -on your phone
or on the SD card reader)
5) Copy the file to SD card (takes 20 seconds)
6) Remove the XDA from the cradle and soft reset with power button held in.
7) When it says press action to download, push the big button between dial and hangup.
8) Hard reset.
9) Injoy the rest of your day
No way getting SD-Card recognized
Hello,
i have the same problem, the ROM (Made with xda-tools or XDArit) on sd-card is not recognized to download when i boot into bootloader!
I found no way to get this running.
Any ideas?
read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again
andhy said:
read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again
Click to expand...
Click to collapse
I'm in the same situation - I have v6.22 on T-Mobile 4.01.00ENG and can't do anything, even with an SD card!
Even the BootLoader downgrade tool with XDATools doesn't work.
Any help with this would be appreciated by many other users in the same situation.
The downgrade batch file in XDA-Tools doesn't work for a lot of people (didn't work for me either). However the wallaby patch should work. Otherwise, use XDARit to downgrade the bootloader using the .nb0 file that comes with the downgrade batch in XDA-Tools.
You write the wallaby patch onto the SD card using XDARit, go into the bootloader and enter diagnostics. Then take the SD card out, write bootloader 5.15 onto the card using the bootloader option in XDARit, and place the SD card back into the device. Then from the patched diagnostics screen select Restore SD and it will recognize a bootloader update. I'd recommend saving your original bootloader from the diagnostics first, but that wouldn't work for me for some reason.
i had a 5.17 boot loader that i downgraded to 5.15 via OS image tools, i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing
i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing
Click to expand...
Click to collapse
Try using XDRit instead of XDA-Tools (use the older version of XDRit instead of the newer version). I'm not sure what you mean by "test phase", but maybe your bootloader screwed over during the update? If so you may need to rectify that first, but that's definately beyond me. If you burn the image correctly onto the card it should pick up automatically as soon as you enter the bootloader with 5.15. If you don't burn it correctly then it won't be picked up.
I'm just throwing in my 2c because I've made all this stuff work with a 5.15 downgrade. There's a possibility the thing simply doesn't like your card too, so try a different 64MB SD.
well i do have a 256 mb card & as far as i can tell the downgrade worked fine, now to use the xdarit files to i need to have the SD reader or i can do it the same way i do in XDAtools which is directly into the card through Active Sync
Hi all,
I have been reading your post in your forum for days. I noticed that there are post on how to re-install the Imagine from the bootloader but none really telling how to do it.
I know i'm supposed to write the OS image on an SD card plug it into the O2 XDA and reboot, but i don't know how to write the ROM image to the SD card. I have a SD writer/reader attached to my PC and I have a 64 MB SD card. Can someone please write about the procedure of getting an OS ROM back on to the PDA with only the bootloader? I can't use Activesync.
Thank You all!!!
You have to use the XDAtools.
Download and installl them. Then right click on the image to write an select write to sd.
After finishing writing on the SD insert the card in your device press the power button and stick into the reset button. After releasing the reset and the power button, the bootloader will come up. It will show you the message OS detected on the card press the action button to download. Press on the button and the image is going to be transferd to your device. Afet finishing, you have to do a cold boot. That's all...
HTH
Stefan
Thank you but.....
Hello Stefan,
Thanks for your kind help!! Just wanted to make sure.
1. I got the XDAtools and installed it.
2. I run the OSimageTool, and i get a form with 2 fields. (destination and source)
3. I can just click on the button with "..." to select a file such as "NK.nb1" as source, then destination can be my SD card drive.
so in conclusion, I copy this one image(file) to my SD card. Stick in my SD card and follow your instructions and it should work right?
Please advise,
Thanks again man for the advice.....
Chad
Yep.
That's all you have to do....
Stefan
Problem upgrading from SD-Card
Hello,
When i write a new rom on my SD-Card with OSImagetool or XDArit and insert it into my device, starting bootloader the new rom is not recognized by my device. (There is no upgrade dialog)
Bootloader 5.22, XDA
This is a known situation Bootloader 5.22 will not download rom via SD card. My suggestion is to downgrade your bootloader to 5.15 or thereabout. You can find how in this forum.
No SD-Card Update
Thx
but when i save my "corrupt" ROM via Bootload to SD an do an reboot, the update will be recognized! When i take out the card an reinsert it into the device the update will not be recognized!
Sounds like a crazy problem?
How can i downgrade my bootloader
How can i downgrade my bootloader without having an running OS?
And without getting my SD-Card recognized?
THX
I try to upgrade my wm2002 to wm2003 and halt half way. After the hard reset, the screen still show the upgrading screen.
Please guide me to flash my xda with the SD card in the bootloader v6.22 environment.
Should work the same way:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi LumpiStefan,
Sorry for my stupidity, i really been trying for the past weeks to solve the problem.
I have downloaded the XDATools into my PC and cook a Rom image of wm2003 with Asia configuration nk.nb1.
I have also imaged it into my 256M SD card using the XDATools.
I do a hardreset after placing the SD card into my XDA and got the wallaby bootloader v6.22 with GSM OK. I have to push the 3rd active button into to see the flash tools page. But it only display cd rom to sd, boot to sd, cd+boot to sd and gsm rom to sd.
What should I do next?
Thanks a nillion
Looks like the Bootloader didn´t notice the new ROM on your SD-Card.
Either you have problems copying the ROM to your SD-Card (Do you use an internal Card Reader) or they have changed something in the bootloader...
Try doing a backup of your ROM via Bootloader (ROM to SD) and reenter bootloader. If you get the option to flash your device you have a problem writing the ROM to the SD-Card. Otherwise it´s an issue with the bootloader...
Stefan
Yes, I do used a intergrated SD card reader to write the ROM to SD.
I can't backup my ROM to SD. Each time I try, it said Card Key Invaild...???
If it is the bootloader having the problem, how...????
2 steps in Upgrading ...
At first you have to downgrade your boot loader from 6.22 to 6.15 or so. Bootloader 6.22 will not allow flashing your device, unless you are equipped with the proper sd key. The way to do it is using the XDArit (I had problems with the new version in which protection of your hard drive has been implemented. You should write an SD with the wallabypatch (look at the FTP for the NB file..). a tip is when writing the sd with this patch, check the box of diagnostic). Than flash your device.. and you have to be quick and follow the instruction carefully... it will allow you to run diagnostic... which enable to flash the device. In summary for this section look for the wallabypatch instruction.
2. after you manage to write bootloader 6.15 , it will enable you to flsh you device with the new SD (written by XDArit ).
Good luck.
Dear kind Sir,
Is there any way you can show me how to downgrade the bootloader from v6.22 to 6.15?????
Can guide me through step by step.......Sorry.......
BootLoader 6.22 -downgrade
The following has already been published here, however I kept it as a text file and here it is...
I have done it few times for my old machine as well for other friends...
Please pay attention to the sequense and the "push bottns" ..
Good luck
Hardware that you need:
1. O2 XDA smartphone (obviously!)
2. Sync cradle
3. Internal/External SD card reader
4. Spare SD card (preferably 2)
Software you need to download:
1. Get cooked ROM or any other ROM. ROMkitchens at
http://lumpistefan.dyndns.org
2. Get XDAtools from
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
3. Get bootloader fix tools from
http://www.xs4all.nl/~itsme/download/bootloaderfix.zip
4. Get Wallaby patchloader fix from
http://xda-developers.com/~itsme/download/wbt-1.5.tar.gz
5. Get XDArit v1.2 tool from
http://xda-developers.com/XDArit/XDArit.exe
6. Get XDArit v1.0 tool from
http://givemebeer.com:8080/warez/XDA/xdarit.exe
7. Get Wallaby Patch file from
http://xda-developers.com/XDArit/wallaby-patch-tool.nb2
** For XDA with Wallaby Bootloader V6.22, I only need items
1,2,4 and 5.
Method 1:
1. Install XDAtools.
2. Start XDAtools and select the OSImageTool.
3. Backup your present ROM. Select Source and Device Memory
(current ROM). For destination,
press the [...] button and select a place to store the file.
Press Copy. Keep the file
created in a safe place.
4. Next, select Source as the ROM file you downloaded or
cooked. Select Destination as
Device Memory (via Programme A). Click Copy.
5. Follow on-screen instructions.
Method 2:
1. Extract wallabypatch-sd.nb2 from wbt-1.5.tar.gz in item 4.
2. Using XDArit v1.0, choose Write to SD card and tick
Diagnostics and select the file
wallabypatch-sd.nb2 and tick the header of 1k. Click OK to
write.
3. Insert card into XDA and choose No when prompted to format
card.
4. While pressing power button, press the soft reset button.
Device will boot and display
Wallaby Patch
Tool 1.5/6.22
-------------
Detected:6.22
Patch Done!
Press ACTION
which is the centre of the control pad. Press that and it will
show
Wallaby Patch
Tool 1.5/6.22
-------------
Boot -> SD
CE -> SD
Boot+CE -> SD
Password Menu
Restore SD
About
Exit
Press down key until Restore SD and press ACTION. It will show
Wallaby Patch
Tool 1.5/6.22
-------------
Insert valid
SD ROM image.
WARNING!
Upgrade ROM
at your own
risk!
Abort
Continue
5. Remove the SD card and insert into card reader. Using
XDArit, select Write to SD card
and choose Windows CE. Select the file that contains the new
ROM, tick the header of
3.5k and click OK to write. It takes me about 4 minutes to
write and image on USB 1.1
6. Re-insert the SD card, press down key to Continue and press
ACTION
SD DOWNLOAD
===========
CARD TYPE:
CE OS
Press ACTION
to Download
Press REC
to Exit
Count =
00000000
Press ACTION
SD DOWNLOAD
===========
Please wait
for
Downloading
PRG :0xxxxxxxx <-- incresing numbers
END :020000000
Flash Writing <-- blinking
SD DOWNLOAD
============
Waiting for
complete...
SD DOWNLOAD
============
Download
completed
Checksum is
not correct!
COLD BOOT
TO RESET
7. Press the battery button (near the earpiece connector) and
wait 30 seconds. Press
button again.
Your XDA should now boot to the new ROM.
Notes:
1. Software tested to work on Windows 2000. Reported to work
in XP as well. Windows 98
is problematic.
2. Good place to get OS ROMs and Radio Stack ROM
http://www.yorch.net/
3. When upgrading to WM2003 using the AT&T ROM 4.01.16, you
will not be able to re-flash
the ROM again using XDAtools. You will need to use the SD card
method.
To Do:
Changing bootloaders.
Back to top
Thanks to all,
My XDA is alive.......
Its alive.........hahahahaha.........
Re: BootLoader 6.22 -downgrade
Dubi said:
The following has already been published here, however I kept it as a text file and here it is...
I have done it few times for my old machine as well for other friends...
Please pay attention to the sequense and the "push bottns" ..
Good luck
** For XDA with Wallaby Bootloader V6.22, I only need items
1,2,4 and 5.
Method 2:
1. Extract wallabypatch-sd.nb2 from wbt-1.5.tar.gz in item 4.
2. Using XDArit v1.0, choose Write to SD card and tick
Diagnostics and select the file
wallabypatch-sd.nb2 and tick the header of 1k. Click OK to
write.
3. Insert card into XDA and choose No when prompted to format
card.
4. While pressing power button, press the soft reset button.
Device will boot and display
Wallaby Patch
Tool 1.5/6.22
-------------
...
Click to expand...
Click to collapse
Excuse me, can you help me what to do if i lost for stupid my wallaby bootloader ... i only get parrot screen from T-MOBILE (number version, radio, etc... only) and i would back to life to my wallaby. it is dead 5 months ago :roll:
thank you too much your help.
Stuck in bootup
Guys,
I believe I have the same problem as the last post. I have several XDA's and one boots up to the "Welcome to TMobile" screen with bootloader 6.22, G324e4, R6.25.02, 4.01.16.
This is a Tmobile release with no ROM modification. I used a second XDA to start the bootloader and dump the ROM to an SD card and I then used this SD card to flash the ROM to the frozen device.
It did nothing, it is sill stuck on the boot up 'tmobile' screen. Any ideas?
Thanks Paul.
Try installing a PPC2002 ROM and if the device works normal downgrade the bootloader.
Maybe this is an issue of the bootloader 6.22
Stefan
LumpiStephan,
The two devices I have, one working one frozen, is stock from the factory, no modification of any kind, both have 6.22 bootloaders. All the self tests work fine, GSM, memory, everything is fine.
I have no idea of what it is waiting for.
Thanks,
Paul.
Thanks alot
I think this topic must be static at the top of the forum. You are great....