Related
I have upgraded to PPC2003 v 4.00.01 ENG from FTP..lycos.uk...and am very happy with the speed of the Qtek that has greatly improved. I have radio V. 3.19.01 that did not change with the upgrade ..Is there a better version of the Radio Stack?
If so where is the link? I use Qtek 1010 in Oman. ME
Ravi Radh
Hi,
my advice to you if your Radio is working fine with the upgrade dont change it.
Generaly the 3.19.01 was a good Radio version for QTEK when i upgraded to 3.23 i had problems in Lebanon. If ure device is working fine keep it like that.
:wink:
Hi,
Thanks for the advice @ Arzleb. I think its better to keep it going this way as its difficult to have a stuck QTEK with an improper Radio in it.
Its just that this version of Radio I feel has a falling signal strength!! Could be the OMANTEL GSM network too!!
Its too early to evaluate as I got 3.19.01 ver just a week ago
Thanks
Ravi Radh
Well Ravi i tried every RSU possible on the QTEK in order to track the signal problem which i also have in Lebanon. Currently i am using the o2 4.21 and i can assure u its the same as 3.19 & 3.23.
I think sometimes the signal bars arent always right! i will give an exemple sometimes the bars shows 1 or 0 and i could still receive a call. Dont always trust the bars but also that doesnt mean that the Signal is good and i dont think its the device's fault. U could blame the operator 50% and the device 50%.
Now what is happening with me is that the bars change very fast on the same Cell i mean they drop to 1 then go up to 4 very fast like crazy lights and also in places were the signal on other phones are full on my QTEK is 1 or 2.
Anyways as long as no one is telling you that we are calling you and ure phone is closed i think ure safe.
Salam bro
:wink:
Hello,
does any one have an executable file with the 3.13 version?
Thx!
Has anyone else noticed or experienced little to no signal being shown with this T-Mobile WM2003 Update? Since I've upgraded, I've been having issues with making calls, getting/losing signal, and alot of other issues related to the phone side of the device. Didn't have these issues prior to upgrade or for the first 2-3 days after upgrade.
I was thinking about downgrading and starting over, but I wanted to hear the opinions of others on here. What do you think I should do from here?
Thanks
I have exactly the same problems.....(After a day or two)
Also thinking of downgrading.
What radio stack are you guys using?
I've got the same problem!
I'm using the 6.24.00 T-Mobile radio update with a cooked WM2003 rom. The signal seems lower than when I was using the latest AT&T RSU.
I'm using 4.21 (Dutch XDA)
T-Mobile ROM 4.00.10
6.24.00 with the 4.00.10 ROM Version. I didn't have any of these issues either with the AT&T radio stack, just since I upgraded to the T-Mobile one.
I am using the Siemens SX56 with ATT. I have the same issues. Signal, ring volume does not seem to be as loud even when using a standard ring tone.
Everything worked perfectly until I upgraded to 2003
Eric
Hi,
My voicemail indicator icon sometime doesn't show, even several voicemails there, it still doesn't show.
It happen most of the time (with signal/ or w/o). Reboot the handset doesn't seem to help.
Any thought? I'm using T-Mobile network and never had this problem before.
WM6 5.2.318 build 15341.4.0.01
ROM 2.18.0.0 WWE 2/14/06
Radio version 02.61.11
Protocol version 4.1.13.28
ExtROM version 2.25.11.102
What's up tempoct?
I'm having the same issue; however, I have a Cingular 8125 on Cingular's network. I upgraded the phone to WM6. Below are my specs:
- Rom Version: 2.18.0.0 WWE
- Rom Date: 2/14/06
- Radio Version: 02.61.11
- Protocol Version: 4.1.13.28
- ExtROM Version: 2.25.11.102
I am thinking it may be the radio version we're using; however, i posted my own thread before i noticed yours and i am also questioning the same issue.
I've gotten voicemails but not notification what so ever by the phone, which means i have to constantly keep checking my voicemails to see if there's anything...
I'll keep you posted if someone lets me know anything in regards to our issue.
Good luck!
Will V.
I might try to upgrade the radio version.
The thing is, my problem is not consistent though. Says, sometime I tested by calling my phone and left the voice mail. Sometime, the indicator show but most of the time it doesn't.
Its the security policy...
Check the service indication and service loading security policy. Might be worth applying the same policy as the original rom which your device shipped with.
I have a O2 Atom Life upgraded to WM6 and I have the same problem. I don't get the voicemail notification icon to turn on when I get a new email. I do get the missed call icon if my phone is on though. My Tel-Co is T-Mobile in the US.
I can tell that I receive the signal because when I leave myself a message using another phone, as soon as I hang up, my phone wakes up (screen turns on). I know it's not the SIM or T-Mobile because I tried it on my old phone and it works perfectly well.
The last post says to check the security policy. I have no idea what you're talking about. I apologize for being a newbie but can anyone explain in more details what I should do?
Thank!
It's your radio ROM version. Try either 2.19.11 or 2.69.11 and the problems should stop. Personally I use 2.69.11 because it seems to get better reception than 2.19.11.
That sounds really good, but being relatively new to this, I have a few questions:
1. Is this Radio ROM going to work with my Atom Life with WM6? I found such a file on Handango, but it was for a HTC Wizard running WM5.
2. Is it good for T-Mobile US? I read in some other thread that 2.69.11 is only good for Europe.
3. How do you install it?
Thank you again!
I have a Herm100 device (JASJAM) with a very big problem in it's GSM module.
it works only if the signal strength is quite well. may be a 100 meters away from a Mobile BTS. I upgraded the radio rom several times but didn't help at all . Any body knows what the problem might be?
thanks
Please!!!!!!!!
No one can help me with this problem?
where can I buy a board for my JASJAM?
sounds like a hardware fault , antenna not working , dry solder joint?
Were you using 1.54 radio roms as there has been gsm issues with signal using those, I myself have had issues.
I had that problem with many radio ROMs , actually with all I upgraded to including ROM 1.54.
It's not a ROM problem. I also used FieldTest.exe on the device, the result was really confusing! FieldTest shows the signal as strong as other cell phones but I can not make any incoming or outgoing call. so it may not be an antenna problem since the receiver works well.
anyway, is it possible to find a board?
Not a hardware problem
Dear every one!
Following the previous posts, I have to announce that I got my jasjam for repair. they examined it's mother board and told me that there is nothing wrong with the antenna circuits and other hardware issues on my cell phone. So it should be a software problem. is there any suggestion for this? please help me!
What country, what is the radio rom your carrier uses?
These are important to tell so we can help.
The radio rom doesn't need to be upgraded to the latest to work best where you are. It COULD be causing issues if your carrier doesn't like it. Can only suggest to find out what they are using and flash to that..
Cheers...
Any Idea
I'm from Iran. I tried many radio roms
current specifications are:
WM5
ROM Version: 1.31.305.2
Radio ROM Version: 1.38.30.10
IPL-1.01
SPL-1.11
Radio BootLoader Version: 1.0108
Does any one know how to downgrade the radio bootloader
Thanks!
UPDATE!!
It seems that a solution for the problems has been found for:
- Reception difficulties
- BAD gsm performance
- No reception on the phone
http://forum.xda-developers.com/showthread.php?t=389601
Please go to this URL, read it, upgrade your broken polaris device and respond in the poll that it either worked for your or didn't
----------
Hi guys,
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Does anybody have the same problem, or had the same problem and find a fix?
Rroet
Hello,
I do have the same problem, and got it on the same way as you did?
could someone please help us?
Do you have the same difficulty as I do:
I've followed the procedures as described in manuals everywhere:
- remove the memory card
- be happily synced
- start app
- device goes into the tricolor screen
- replug the usb as described on the polaris screen
- Flashing startssss.... goes... goes...
- HANGS at 99%
- Have to do recovery procedure as shown on screen.
- Flashing procedure starts second time
- hits 100%
- Now i've got a bad reception? On my previous polaris (replaced due to a phonespeaker defect) had 2 bars even after upgrading. My new Polaris doesn't have any bars after I upgraded (It did have 2 bars before upgrading)
Any expert here with information?
I'm having the same issue, by upgrading RADIO 1.58.21.23 to the latest 1.64.08.21 I got weak signal on GSM. Two bars on signal icon on the top near the BTS.
I'm using BEPE 0.67 ROM with WM 6.1, downgrading the RADIO doesn't help. I have searched thru this forum and didn't find any relevant solution
I was having the same problem with you. I have tried everything including flashing every rom/radio available and performing hard resets at every stage. Unfortunately, in the end I had to get my cruise replaced.
These are my original Cruise details, just to see if there is anything in common:
HK Traditional Chinese HTC Cruise
1.27.832.1. CHT
01/10/08
1.58.21.23
25.65.30.04H
Very interesting issue
I read this several times in different threads now.
Fortunately myself doesn't suffer this issue and i have
also upgraded to 1.64.08.21. Lucky one.
Maybe one should start a poll about this
Would be nice to know the results.
Olioaglio
I have this issue too after Hard-SPL and ASerg Rom, I have problems in o2 German network... very weak signalstrength 1/4 or mostly 0/4 (no network, denied).... i tried original radio 1.58.21.23 and 1.64.08.21 any1 know what could have happened? can a rom upgrade damage the radio hardware in any way? would be hard to believe... with german's BASE i have at least from 2/4 to 4/4 signal strength and sometimes I even get 3G... in my old o2 orbit (artemis) everything is at max strength
I have the same problem after flashing the 1.64.08.21 radio. Is there no solution?
I guess I am lucky, but with 1.64.08.21 and Bepe's 0.67 ROM I don't have any problems. There is no change at all. Signalstrength is the same, 3G is working fine.
1.64.08.21 and Bepe's 0.67 ROM
Me too
I have the o2 orbit 2 (POLA200)
Rroet said:
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Click to expand...
Click to collapse
Strange, I'm using also 1.64.08.21 and it's working like a charm... I do have another network provider (KPN, not t-mobile). Have 4 bars reception... Never had real problems with the reception too...
POLA100 (Touch cruise). Only my flash of radio succeeded in 1 time (not had to reboot before hitting the 100%). Also The Netherlands, so it doesn't seem to be country bounded.
Does it find your network? (Menu => settings => Phone (on personal tab)) then choose tab Network.
Current network: T-mobile
Network selection: Automatic
You can try Find Netwok over there, or Set network. Please also check the tab "Band", should be on Auto (both options).
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
is it possible radio of pola100 and pola200 are different, even they share the same version number?
mavvy4ever said:
is it possible radio of pola100 and pola200 are different
Click to expand...
Click to collapse
Could be, but then again, Rroet and I are having the same devices (pola100), are living in the same country, having the same radio version (the 1.64.08.21), the only difference is that he has another provider (which I can find if I search for networks)
Rroet said:
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
Click to expand...
Click to collapse
In June I will switch network (to Vodafone)... I hope it all keeps working... Really strange that you can't find your network anymore. If I scan for networks I see them all (also Vodafone and T-Mobile).
(Think you've allready done this) but what will happen if you give your device a hard reset, or flash Windows Mobile again to your mobile... This because I'm having the same device, can find your network and having the same radio version.
hi there!
I unfortunately got the same issue.
I got a XDA Orbit 2 from O2 Germany. Did the hardspl unlock(used the tool from olipro) after that i flashed the bepe 0.67 premium bepe rom.
Right now my orbit is disconnected most of the time, or has real bad signal strength. It would be very great if this can be fixed.
Greets
EDIT:
flashed the 1.64.08.21 got the same prob.
Got another orbit2 with everything in original delivery state. is there a possibility to "clone" the device back to original state?
I got very bad reception when update radio 1.64.08.21 . it frequenly lost connection when I got phone call , tried to downgrade and no result
I have vodafone simcard and now I must force to swich to 3g connection to make a phone call . when Iam on gsm I conldnot make any phone call at all , I am now just wait and see someone smart to show me how to correct this trouble
the phone work on my 3 sim but it is not as good as it was before
To make it complete: I have the O2 Orbit 2 (german) (POLA200) and I
have ugraded to the 1.64.08.21 without glitches (worked at first time,
did it through bootloader mode) and it is working with the same (good)
reception as it did before (phuuuh). Maybe it has something to do with
the flash problems at first time, which some users had. Could someone
sort it out? It's really goring, that even (successful) backflash to the stock
radio does not seem to fix the issue like the Poll indicates
Olioaglio
Edit: using Bepe 0.64 GER Opera with the Orbit2 ATM.
Edit2: Thought it might be a good idea to crosslink this thread to the
Polaris Radio ROMs thread to get things together.
What about the IMEI number btw?
I don't know if this is what happens by default, but my IMEI number is 2 digits longer in the software, then it is in the hardware:
example of my hardware IMEI: 123
in software it reads 12301
Does this matter in any way?
Interesting stuff... as Olioaglio said maybe there´s a relation to how it was flashed. If it was clean install or the process had to be repeated. Can anyone with this problem report back on this issue. I tried the new radio here in Spain but I went back to the stock radio as it seemed to have a better reception and battery life. I must admit I´m rather cautious about trying different radios as I fried my Hermes due to the radio and now it can´t connect at all.
I've had no problems/glitches during the flash process but I have the same reception problems as everyone else. Even using a friend's SIM with a different carrier made no difference in reception.