Related
Hey guys!
I need yoyr help. My phone was dead since march 11. I don't remember what I'm done with it, but the following symptoms are:
- when I turn on the phone nothing exept Galaxy S GT-I9000 Samsung screen is showed.
- when I turn phone to download mode and connect it with my computer, nothing happens,no notifications, device manager nothing shows, I once showed: one of your devices has malfunction.
What should I do? USB plug is broken? My other phone have no problem with this MicroUSB cable from samsung and it's connecting to computer without any problems.
Edit:
I plug cable with turning on download mode. Now computer shows: one of your device has malfunction. DM error loop?
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Mathsiel said:
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
You use odin right?
And correct drivers installed?
Sent from my GT-I9000 using Tapatalk 2
misiek1791 said:
Now computer shows: one of your device has malfunction. DM error loop?
Click to expand...
Click to collapse
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Mathsiel said:
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
xsenman said:
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Click to expand...
Click to collapse
yep, I was checked this thing. And this is not helpful. Yes, have few good ideas but for my case... nothing I can use... Main reason: My computer don't show me any alerts or messages after plug in mUSB to phone...
I solved my problem. What I did was to use another PC, then just installed the Samsung drivers, plugged the phone in download mode and the the driver installed OK.
Odin recognised the phone too so I could flash a kernel.
I can't realize why my PC didn't recognize the phone. I tried reinstalling drivers, the android SDK but nothing worked.
Thanks for the answers.
misiek1791 said:
My computer don't show me any alerts or messages after plug in mUSB to phone...
Click to expand...
Click to collapse
And IF nothing worked and USB connection still fails no matter what, than it would be best to look into this
I have a broken screen and digitiser - I can see nothing at all on the screen and it does not recognise any touch movements.
The phone does appear to turn on and is recognised by my computer.
I want to retrieve all my data - photos, videos etc - from the internal SD card.
Unfortunately I did not have USB debugging enabled when the screen broke.
Is there a solution to achieve thiis?
COLDrum said:
I have a broken screen and digitiser - I can see nothing at all on the screen and it does not recognise any touch movements.
The phone does appear to turn on and is recognised by my computer.
I want to retrieve all my data - photos, videos etc - from the internal SD card.
Unfortunately I did not have USB debugging enabled when the screen broke.
Is there a solution to achieve thiis?
Click to expand...
Click to collapse
Connect with usb and copy your files to the pc You don`t need usb for that.
Thanks for your reply Gee but that was, oddly enough, the first thing I tried.
The computer recognises the device as a portable media player and there are no files found in the device.
COLDrum said:
Thanks for your reply Gee but that was, oddly enough, the first thing I tried.
The computer recognises the device as a portable media player and there are no files found in the device.
Click to expand...
Click to collapse
Maybe my original post wasn't too clear.
I need to retrieve all my data from the S4, and the conventional method of plugging in to my computer via USB does not recognise any data. Would I possibly have to select to mount the card to view? Either way, this is not an option due to the broken screen.
My next thought was to use ADB to transfer over all the content of the internal SD card, however, my S4 is not recognised using ADB (I assume as USB debugging was not enabled when my phone broke?)
So, is it possible to enable USB debugging without use of the screen on this device?
COLDrum said:
Maybe my original post wasn't too clear.
I need to retrieve all my data from the S4, and the conventional method of plugging in to my computer via USB does not recognise any data. Would I possibly have to select to mount the card to view? Either way, this is not an option due to the broken screen.
My next thought was to use ADB to transfer over all the content of the internal SD card, however, my S4 is not recognised using ADB (I assume as USB debugging was not enabled when my phone broke?)
So, is it possible to enable USB debugging without use of the screen on this device?
Click to expand...
Click to collapse
do you have custom recovery on your phone??
No, the phone is entirely stock.
I'm still holding out hope that someone has seen this happen before and knows of a solution for me to retrieve my data?
Can anyone help me with this?
COLDrum said:
Can anyone help me with this?
Click to expand...
Click to collapse
Impossible bro.
gee2012 said:
Impossible bro.
Click to expand...
Click to collapse
So, I have lost all my photos etc that are on my phone?
COLDrum said:
So, I have lost all my photos etc that are on my phone?
Click to expand...
Click to collapse
i think there is a way if you flash custom recovery
samersh72 said:
i think there is a way if you flash custom recovery
Click to expand...
Click to collapse
Can I flash customer recovery, though, as I can't see my screen?
You could install ClockworkMod Recovery and use ADB to retrieve your data while it's in recovery. You can put your phone in download mode by pressing and holding Volume Down, Home and Power buttons till it vibrates. Then press Volume Up to confirm that you want to enter download mode. You should then be able to use Odin to install ClockworkMod Recovery.
COLDrum said:
Can I flash customer recovery, though, as I can't see my screen?
Click to expand...
Click to collapse
you can boot in download mode and flash it without screen. see if odin recognize it
In my opinion if u could turn on usb debugging that would not bring back your lost data. Not really sure though. You could do that by connecting a micro usb to hdmi cable to your tv and then i guess you could use the phone there, not sure if the touchscreen would work though but worth a try..
Sent from my GT-I9500 using xda premium
Thanks - I have flashed CWM via Odin successfully.
I have installed ADB but my device does not get recognised as an ADB device - have I missed something?
COLDrum said:
Thanks - I have flashed CWM via Odin successfully.
I have installed ADB but my device does not get recognised as an ADB device - have I missed something?
Click to expand...
Click to collapse
be sure that you boot in custom recovery, connect your phone, open cmd in adb folder (shift + right click) and type (no need to enable usb debug):
Code:
adb devices
you must see the serial number (in recovery mode)
Code:
adb pull /sdcard/
use attached adb folder
samersh72 said:
be sure that you boot in custom recovery
Click to expand...
Click to collapse
Because I can't see the phone I'm not sure the state it's in.
Is it just Volume-up + Home + Power to access customer recovery?
I can now see the device in ADB.
When I run the adb pull /sdcard/ command I get an
error: device unauthorised. Please check the confirmation dialog on your device.
COLDrum said:
I can now see the device in ADB.
When I run the adb pull /sdcard/ command I get an
error: device unauthorised. Please check the confirmation dialog on your device.
Click to expand...
Click to collapse
hmmm do you read "recovery" in command line after the serial number?
there is a dialog box showed on your broken screen, try to tap on, maybe you will hit confirmation
EDIT: your digitizer is broken!......no way to recognize touch.....
Stock rom rooted.
Cant get phone to connect via adb (assuming because i have to select internet on the screen)
Any tips/tricks to retrieve data?
-Airwave- said:
Stock rom rooted.
Cant get phone to connect via adb (assuming because i have to select internet on the screen)
Any tips/tricks to retrieve data?
Click to expand...
Click to collapse
Maybe try installing Koush universal drivers then power off phone after that hold vol up and plug in USB to go to download mode and see if adb recognizes.....hope this helps
RubbleTea said:
Maybe try installing Koush universal drivers then power off phone after that hold vol up and plug in USB to go to download mode and see if adb recognizes.....hope this helps
Click to expand...
Click to collapse
charging it now, ill give that a shot. thanks
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
Hi guys,
i knew this topic was dicussed a few times, but i didn´t find a solution which fits for me.
Unfortunately i wiped my OnePlus 2 using twrp and since then i can´t used it, it only says "no OS installed".
No USB connection is found, i can not find it as an adb device (daemon not running. starting it now on port 5037) and USB OTG isn´t working either.
I tried different drivers for the device (actually i uses a qualcomm 9008 driver) but nothing helps.
Is there a change to rescue the phone?
Many thanks in advance!
Were you able to get into recovery mode by pressing and holding Volume Up, then pressing Power once? How about Fastboot mode by pressing and holding Volume Down, then pressing Power once?
Also, what recovery do you have?
Tristan Phan said:
Were you able to get into recovery mode by pressing and holding Volume Up, then pressing Power once? How about Fastboot mode by pressing and holding Volume Down, then pressing Power once?
Also, what recovery do you have?
Click to expand...
Click to collapse
I am able to get into both modes, as well Fastboot mode as recovery. But i am not able to get a connection to my pc or other devices.
Using TWRP 3.0.2-2 as Recovery.
try to connect usb storage with otg
chxei said:
try to connect usb storage with otg
Click to expand...
Click to collapse
Unfortunately usb otg is a big problem at the Oneplus 2. Until now i didn´t find an adapter that works.
Seesternfan said:
Hi guys,
i knew this topic was dicussed a few times, but i didn´t find a solution which fits for me.
Unfortunately i wiped my OnePlus 2 using twrp and since then i can´t used it, it only says "no OS installed".
No USB connection is found, i can not find it as an adb device (daemon not running. starting it now on port 5037) and USB OTG isn´t working either.
I tried different drivers for the device (actually i uses a qualcomm 9008 driver) but nothing helps.
Is there a change to rescue the phone?
Many thanks in advance!
Click to expand...
Click to collapse
Hi I had the same problem a few months ago, my phone wasn´t recognized by my pc because I was using the official charging cable so I bought a cheap USB-C cable and I was able to connect it to my pc and reinstall the OS. Hope this helps.
So your device isn't recognized in Fastboot mode? Do you have any ROMs downloaded on your phone already?
coderch123 said:
Hi I had the same problem a few months ago, my phone wasn´t recognized by my pc because I was using the official charging cable so I bought a cheap USB-C cable and I was able to connect it to my pc and reinstall the OS. Hope this helps.
Click to expand...
Click to collapse
My original cable doesn´t work anyway, so i was forced to try another cable. Unfortunately this didn´t work either.
Tristan Phan said:
So your device isn't recognized in Fastboot mode? Do you have any ROMs downloaded on your phone already?
Click to expand...
Click to collapse
I´m not able to get a ROM on my device, this is my problem.
When I try to connect my phone using adb this is happening:
"C:\Users\Seesternfan>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *"
I tried different tips from the internet but i wasn´t able to get a connection with my phone.
Seesternfan said:
I´m not able to get a ROM on my device, this is my problem.
When I try to connect my phone using adb this is happening:
"C:\Users\Seesternfan>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *"
I tried different tips from the internet but i wasn´t able to get a connection with my phone.
Click to expand...
Click to collapse
If you can get your hands on a USB-OTG cable, definitely do so to get a ROM onto your phone. Have you tried MTP? If you enable MTP under Mount in TWRP, does your PC recognize it in Windows Explorer?
Tristan Phan said:
If you can get your hands on a USB-OTG cable, definitely do so to get a ROM onto your phone. Have you tried MTP? If you enable MTP under Mount in TWRP, does your PC recognize it in Windows Explorer?
Click to expand...
Click to collapse
I have two USB-OTG cables at home. The problem is that the OnePlus 2 USB C port is no ordinary USB C port. Till now i didn´t find a cable that works, except the original one which is out of stock.
MTP is enabled but there is no difference to before.
Have tried reinstalling the drivers?
@Seesternfan
Can it be possible to get remote access to your PC, so that I can help you?
Is your USB-OTG cable a USB-C one? I use a Micro-USB USB-OTG cable with an Anker Micro-USB to USB-C adapter.