Hi,
Does the manipulator work with the latest update versions:
ROM 3.16.52 ENG
Radio 3.23.01
Thanks for the great site !!!
We've mostly tested with 4.x ROMs, but there's no reason it shouldn't, until they lock us out again like they tried for 4.20, at which point we need to spend another day or two getting back in.
Thanks for the reply but the radio version would that be the same as the protocol version in the 'Device Information' window?
If that'so, mine is 32S54. Can you tell me if your solution can unlock these XDA as well? TIA.
Related
Hi, Ive got an older T-mobile unit that was pasr tof the Beta program in the US. As you can see from the stats below it is running older versions of everything. I have started having problems, most that I have not seen on the boards before so my next thought is to update the ROM.
The unit is unlocked and I use it on Cingulars network. I am looking for suggestions on which update to use, 3.14 or Special Edition 1.01, etc.
Much thanks, these boards are great and I have learned alot!!
Unit Info:
PW10B1
Wallaby Bootloader version 5.13
ROM: 3.05d.00
ROM Date: 6/12/02
Radio Version: 5.98
I would ofcourse advise to flash our Special Edition v1.1.
Please use the bootloader to save your current ROM and share it online somehow if you can: we'd like to have it in our collection.
Ive saved my ROM. I have tried to update to 1.1 but I am still getting the 012 Error that says my ROM update is not compatible. I am using AdpatROM in the same folder. Any suggestions???
Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys
OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?
Salam
Thanks Ali-Butt
Othman
since phone upgrade i have noticed that gprs is a tad faster. 8)
Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:
isn't this the same version everyone has been using?
I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!
hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil
Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,
no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile
Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75
brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.
Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,
brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps
Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version
Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
Hello, I'm farely new I was running I think 3.17.03 ENG i think and I wanted to see wm2003SE and I updated it But I've got few questions
I'm running Radio Version 6.18 and my rom version went back down to
3.04.00 ENG is that good that it down graded from 3.17 to 3.04
I'm in IT so I know alot of stuff and I'm thinking that when you downgrade from video drivers you loose stuff so is this like video drivers downgrading?
and the Radio Version does that control how well you recieve Signal? and Do I have the latest version
I have PW10B1 It's T-Mobile the first Gen of Pocket PC Phones and its unlocked I've had it for very long time and wanted to check out different roms also i've been trying to search but too many items was hoping some people could help me out thankyou very much in advance
Re: New to Xda and Semi-new to Upgrading my old Pocket pc Ph
ugmack20 said:
I'm running Radio Version 6.18 and my rom version went back down to 3.04.00 ENG is that good that it down graded from 3.17 to 3.04
Click to expand...
Click to collapse
Versions are just numbers. If anyone decides to "create" a new version, and it should have the number 3.04. than it will have the number 3.04.
In this case it doesn´t cause any loosing stuff.....
ugmack20 said:
and the Radio Version does that control how well you recieve Signal? and Do I have the latest version
Click to expand...
Click to collapse
Newest Radio Version is 6.25.0 and you can get it here for example:
ftp://xda:[email protected]/Wallaby/Radio_Stack
Stefan
hi i am new to this site i am having xda2i with following confg.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
radio version: 1.00.00
Protocol version :1337.39
ExtRON version 1.11.171
model PH10c
now i have few question
1. i have read that xda2i cant be upgrated to windows 2005 is it true?
2.what is the latest version for xda2i and where i can downloaded it.
3. i have seen many people using radio verion 1.18,1.19 but i am using 1.00 can i upgrade my ROM version of my xda2i and which is the best radio version for xda2i keeping in mind signal reception,battery,voice clarity,bluetooth speed etc
hope i get all my answers
thanx in advance
regards majnnuu
no one to help me??????????????
Here ya go....
1) Correct. You can't upgrade your 2i to WM5.
2) I would recommend downloading one of pug's ROMs. You can find them here: ftp://xda:[email protected]/Alpine/O2_Roms_Camera_Fixed_Bug/
If you hate the o2 active stuff, then download the one marked "o2stripped" (I would recommend this one). If you like the o2 active stuff, then download the other.
3) The latest Radio ROM available for the 2i is version 1.04. If you upgrade your ROM using one of pug's rom, then your radio will automatically be updated to version 1.04.
Justin
BTW, I think your device is an Alpine, not an Andes.
Got a problem I'm hoping someone can help me with.
I was updating my rom and it all went wrong. When I turn my xda2i on now I get the normal setup then its goes to a black screen with serial written on it (or usb if it is in the cradle), and apart from that it does nothing.
My laptop no longer recorgnises the device so I can't restore the old rom or restart the process????
Can anyone help please?
tez,
You're in what is called "Bootloader". You're OK. You can do one of two things:
1) Simply re-attempt to "reflash your ROM" with one of the ROMs you downloaded.
2) Reflash your ROM with a ROM update provided your manufacturer. I couldn't get my device to update with one of pug's rom (it go stuck around 18%) so I had to reflash my Alpine with an original ROM released from a manufacturer.
Hope this helps.
Justin