Database Users

The best working RSU for Europe (PPC2003) ?

After having tried o2 4.21 and T-Mobile 3.23 on my xda without satisfying success I am asking what is the most advanced Radio Stack at the moment (to work with PPC2003).
Since the the Qtek came on the market very lately I suppose that their Radio Stack is the most developed. Am I right ?
If yes, where can I download it ?
I only found the ASIA/PACIFIC RSU Version here in the forum and I heard that you need an Asian IMEI for this.
Upgrading my xda to PPC2003 (Yorch's) solved most of my problems but not all (losing signal from time to time).

http://xda-developers.com/phpBB/viewtopic.php?t=3569&highlight=radio
try reading this looks as if they had success with the radiostack url'd to

Flashing Radio Version

Having problems with Radio Version 4.21 from England, ie the phone will not work (I am in Australia). The phone was working OK until I performed the upgrade
It has been suggested that I install Radio Version 6.12 from T-mobile and I have downloaded the file from Yorch, this comes up as an nbf file and I wonder if I should flash it as I can not find RSUupgrade.exe. Any suggestions ?
Chris

You downloaded the wrong file go back to Yorch's site and look under Upgrades and download "USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00".
HTH

dont Australia use 900/1800 like europe ?
if that is the case the us RSU would ruin the phone even more

Rudegar said:
don't Australia use 900/1800 like Europe ?
if that is the case the us RSU would ruin the phone even more
Click to expand...
Click to collapse
You know thats what I thought until I received the below PM:
-------
Radio Stack for Australia
Wed Nov 12, 2003 13:10
Hello Qman,
Thank you for your reply! But great news here as I have managed to get my RSU version to work in Australia.
My carrier is Optus and SIM card is fine.
Basically by trying most RSU versions I wasn’t able to get the phone to work. Funny thing is I tried the RSU version for the O2, which is supporting here in Australia but to no avail! I ended up using the new T- Mobile for the US and works like a dream have fully signal as well.
New version is RSU 6.24.
Cheers Erebus,
-------
HTH

Further to my problems I upgraded to the T-mobile 2003 ROM an their latest Radio stack 6.24 and all is working OK.
I had sent the XDA to Melbourne (Australia) to the accredited Service company (Accord) and they had sent it back saying that it was buggered. I had some very helpful advice from Peter and Joe and have everything working fine. Curiously, when I had XDA 1.2 and the T-mobile Radiostack the phone kept crashing after reboot. Since upgrading to T-Mobile 4.00.21 ENG and Radio version 6.24.00 all works well.
I did try to download some Medical software (MIMS) and thisd has proven to be a bit of a problem. The tech dude at MIMS was not too impressed with Pocket-PC 2003
Chris

Great, glad to hear it all worked out ok! 8)

Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?

Biso007 said:
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Click to expand...
Click to collapse
Thats great news on RS 6.24, thanks for the tip!
As far as not being able to change ROM's after upgrading to a T-Mobile WM2003 ROM, it will still work but you must use the SD card boot loader upgrade method.
HTH

Help needed, this morning I flash my XDA with USA T-mobile Latest Radio Stack (Unofficial) but not working for my GSM 900. So I flash it back to O2 Latest Official Radio Stack RU 4.21 but it flash until 83% stop forever. So i do a soft rest. Then my XDA can't boot. Can someone help me out on this method? I'm in Malaysia. Using 900/1800 bandwidth.

Hi ...
If you have taken SD backup before upgrading, then go for bootloader menu, press Calendar button, and turn off the Radio part. Try to flash your XDA back to the original ROM and RSU, and then perform a hard reset.
In case you didn't, try the Qtek offical RSU 3.25 from http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific. It works good for Asian operators.
Good luck

Problem FIXED... Thanks for the big help.

GSM module hangs. Is it normal-please advise me.

I have XDA with ROM 4.00.11 ENG and Radio 4.21.00. Problem is : GSM module hangs so heavily that I have to cold-reset my device. This is very oppressive especially when I have set software.
I need some advice please.

RSU 4.21 is known to have many issues as you can read in this forum ... if you are using 900/1800 MHz, it's good to switch to RSU 3.25 from Carrier Devices.
If you are not ready to give up your xda ... I strongly advice you to get it flashed by a repair center ... RSU flashing is very dangrous even tho it worked for many people here!!
One last note, better to check with your operator if they can advice on a specific RSU version

Where I can download this RSU up/downgrade software ?
Where I can download this RSU up/downgrade software ?

Here is the file ... do this action on your own responsibility!!!

...done.
well see if it works good. need couple of days. I had before also 3.23.00 and 3.23.11 - both of them sucked. Signal was very weak (according to indicator on top of the screen). Now i see quite good coverage indication. Thanxx a lot.
BTW - I was in Cairo. Enormous ....

Softbank X01HT settings will change after April 1st!!

HTC & Softbank here in Japan have just released an updated ROM for the X01HT. They claim that current un-updated X01HTs will not be able to use the internet connection without updating after April 1st. This is due to them updating their networks.
The new rom is called RUU_X01HT_1.33.761.4_1.14.00.10.exe and can be downloaded from HTC Japan's website. Its 55MB and they say it will take 30 min to update.
This probably means that all you guys who have updated their ROMs here in Japan will have to change their network connection settings.
I hope they included some fixes, namely bluetooth A2DP, into this ROM, but I guess I will have to see what changes after I get around to updating.

Thankfully noted and downloaded...but how will this affect me changing my X01ht to english? It will be japanese again, right?

Yea, it defenetly will send you back to the Japanese version. My guess, from reading their PDFs and info on their site, is that it is a radio and password update. There is no other mention of any other update.
We have 5 months until the contents of that ROM become required. Hopefully within that time, the Awsome people that frequent this forum will be able decipher the contents and kindly tell us what needs to be changed for the people who have converted to English.

Hi, I am planning to buy a X01HT from HK and use it in US. And I am using Tmobile carrier. Just want to verify:
1. Can I upgrade X01HT to some other rom ie. dopod, imate or HTC.. and still function the same since the hardware specification is the same.
2. Does that mean these April 1st rom upgrade is only affecting users that using their phone in Japan only or it will affect us in United States as well?
Thanks
Cyen

cyentsang said:
1. Can I upgrade X01HT to some other rom ie. dopod, imate or HTC.. and still function the same since the hardware specification is the same.
Click to expand...
Click to collapse
i don't know how it's sold in hk but if it is the same as the original, you need to downgrade the bootloader to 1.04 before flashing any other roms. read this thread that talks about "HOWTO: change a Softbank X01HT from Japanese to English".
http://forum.xda-developers.com/showthread.php?t=281617
cyentsang said:
2. Does that mean these April 1st rom upgrade is only affecting users that using their phone in Japan only or it will affect us in United States as well?
Click to expand...
Click to collapse
the short answer is yes. this only affects people subscribing to the flat-rate data plan of softbank in japan. this rom is only in japanese and you won't need it in the us anyways.

Do we have to install the entire upgrade or is it possible to extract the update for the radio stack. 55MB is rather large...

aquasesh said:
Do we have to install the entire upgrade or is it possible to extract the update for the radio stack. 55MB is rather large...
Click to expand...
Click to collapse
why do you want just the radio stack? seems the radio version is 1.14.00.10 and is the same as the old one. the rom is changed from 1.33.761.3 to 1.33.761.4.

I was under the impression it was updating the radio as well...
anyway, since my WMDC is not working right now, i cannot install the rom.

i also using it in tokyo ..
but will it make the sim-lock again .. ??
did anybody have updated .. ??

hermes does not recognize the carrier network

Deer friends,
I need your help.
last weehk I changes my operator in israel from ornage to pelephone.
The hermes does not recognise the new operator network, and i cano not use the phone.
I tried several roms including shaps 4.31. manila and some others.
Yet, i can not use the phone. It does not find any available network.
pelephone network is a UMTS network ( as far as I know).
it is obvious that my hermes is sim unloacked.
Pleas any one familiar with pelephone network and hermes setting,
I need help
regards

radio upgrade
Hello friend
try going to phone>menu>options>band>them switch the band to the hrtz that your new carrier operates
if it dosen´t work try to upgrade you rom , for radio upgrade guide go to xdawiki on the main xda page​