help... my MDA is dead... i press reset boton with start boton and dont do it anything... in the past i enter but when i am chaging the rom all end good but no start windows... and dont enter bootloader....
something to do it? is my MDA dead?
are the any options for enter bootloader or change rom without SD card?
thanks for all
Strange.
The same with my XDA.
I just read out the rom, and later , when I wanted to wirte a new rom to my xda, I couln´t enter the bootloader-menu...
It just happens nothing, when I press the left Softresetbutton while pressing the powerbutton :?
ANybody any Ideas????
The rest of my xda is normal working.
Related
hi every friend,
please help me, i was update my xda to ppc2003 while computer was down, that cause me have to restart it, after that my xda dead, i use hadr reset it says gsm ok, then start a set of test like,ram, usb, sound,sd card. then stoped. can someone tell me how to fix it. thanks a lot, i really need that pda.
hard reset doesn't lead to these diagnosis ... are you sure you didn't go into the boot loader mode ??
only hard reset will cause nothing, i use hard reset and power key come out the bootloader svreen says" gsm ok" then i press action key, it start test
this means "soft reset" ... the hard reset is the small hole with red battery icon.
Anyway, having "GSM Ok" is a good news ... all you need now is to try HARD reset ... and if it doesn't work, you may flash your ROM with a new one using SD card if your boot loader version is older than 6.22
Hi guys:
Really strange thing. When trying to flash phone (activesync connected) the phone went to blank screen and RUU lost conection. After that there is no way to enter bootloader, but everything else is working ok.
Device has USPL installed, and been flashed many times.
Is there any way to repair bootloader?
Thanks.
Note: Actual ROM is official HTC WM6, with ext ROM modified to 2 Mb capacity.
how are you entering the boot loader
To enter the boot loader you have to either keep the voice record button held while doing a soft reset or keep the same button pressed while the device is starting
Yes, I Know
kganesh1234 said:
To enter the boot loader you have to either keep the voice record button held while doing a soft reset or keep the same button pressed while the device is starting
Click to expand...
Click to collapse
Thank you for your apreciation, but I have already done it.
I've been browsing this useful forum in order to learn a bit more about my artemis
hmmpp
RUU hehehe..
Take the SD card out then perform the procedures to get into the Boot Loader, it will work, otherwise you'll see white screen for 2-3 mins then the phone will say "Searching for SD Card..." then it will eventually get into the bootloader, if this solves your problem then please try the search feature next time because this has been discussed many times before...
digitalextremes:
Please go..... with "search button" text.
Everytime i see such text i wonder if U ever tried it!
nevertheless.
My Arte has the same problem, OS is launching properly, everything seems ok.
I want to flash a new ROM (Shady's last PLK) but i can't get into bootloader.
Thank U in advance for post with Voice-dial+Power+reset (stylus) or mentioning sim or SD, i tried all combinations.
If U have nothing to say, stay silent.
Everyone who can help, feel free, to do so.
THX I A
I had the same problem... to fix-it, just remove the SD Card...
Hi!
I have a HTC P3300.
I bought a 4Gb SDHC card, and it won't work. I read at the forum that I would need a different rom, so I downloaded "Artemis_Touch_4.02_Full_with_no_cube", which would have sdhc-support.
Then I executed "STEP 1 - activesync then uspl cid unlocking.bat", that finished ok, and then "STEP 2 - activesync then flash artemis touch rom.bat", which stopped with an error 302.
After a restart all that came up was the boot loader. I then tried to flash the original rom (HTC WM6 Dutch) from the computer, but that ended also in an error.
I tried the SD upgrade (rename .nbh file to ARTEIMG.nbh, put it on a formatted sd-card and load it in my phone), and it finished without errors, saying I should press any key.
After pressing a key, the bootloader popped up again.... :S
Can anyone help me? I have been searching the forum and trying to get my phone to work since 21:00 and I haven't got any progress at all!
well sorry for that
did you tried to make hard reset?
and once i had a completely dead artemis.. no sign of life..but it fixed by the following..(and maybe this may help you cuz the flasheng goes not like usual)
while your mobile is off.. press the record botton and the camera and it should starts with usual sd card flashing.
for me this what happens.
the setup was in three phases as i saw... and it took about 30 mins .
maybe it will works for you
I also tried a hard reset, wouldn't work.
I pressed and hold the camerabutton, but nothing happend...
Maybe the battery is empty, so I pressed and hold the camera button while plugging in the usb-cable.
It started the SD-upgrade, and is still busy.
The update ended with a "press any key to continue".
But when I pressed a key, the boot loader popped up :S
When I tried to flash another rom (NLD-FINAL), an error occurred (I believe it was error 270, not sure).
But then the normal startup screen appeared!
I don't know how, but the problem seems to be fixed!
sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)
As you can see in my previous post, I managed to flash the original rom.
I'm gonna try to upload an other rom some other time...
And with a patch I got the SDHC working too!
Thnx for your help!
y_bother said:
sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)
Click to expand...
Click to collapse
Hey, thanks a lot, I tought, my HTC-Cruise is ready for sending to repair, but with your info, it works again. I could install the WM 6.1 again, after System hangs up while booting every time. He found USB connection on a colored sreen. Thank you very much.
Jupeli
i have HP ipaq 6815 and i.ve try to upgrade my ROM...but my SD card was not empty and ask to format the card.i shut down the phone and take off the batery for a while and now wont started...i've try with a diferent SD card not working...please can anyone tell me how to fix this problem...
anyone.....pleaseeeeeeeeeeeee can help me...........
what should i say...no one can help me becouse i'm new here????come on anything will be a help...just to start up windows
this is how i fix my problem...
First:
Remove the mini sd card
Remove battery
wait 5 minute minimum
press and hold Soft Keys and Sof Reset
Insert battery, release Soft Reset
release Soft Keys
Device is switch on and entering in Boot Loader.
i cant say thx becouse no one help me...i hope this will help for those who has the same problem...so...i'm happy to help
pljs said:
this is how i fix my problem...
First:
Remove the mini sd card
Remove battery
wait 5 minute minimum
press and hold Soft Keys and Sof Reset
Insert battery, release Soft Reset
release Soft Keys
Device is switch on and entering in Boot Loader.
i cant say thx becouse no one help me...i hope this will help for those who has the same problem...so...i'm happy to help
Click to expand...
Click to collapse
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
dulands said:
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
Click to expand...
Click to collapse
yuo must Hard reset the device after that reFlash with official ROM for your device
dulands said:
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
Click to expand...
Click to collapse
what type your device...?
Hello,
I wanted to upgrade my operating system on my XDA II but to do that i need to use the power button but on my phone the button is broken, is there any way to get to the serial screen such as a freeware program i can run or another way of doing it?
There is a video somewhere here in WM5 or WM6 to show you how to upgrade.
It´s here:http://forum.xda-developers.com/showthread.php?t=370752
Nice Little Tool For Entering BootLoader
Ok give this a Try it was Originally for Polaris but it works with my prophet so i am assuming it works with other htc devices ,Install the cab then run Enter BootLoader from programs\tools folder (no button pressing needed)
thkz it wrks great
help...
i cant enter the bootloader mode... i think my hima is brick when i try to enter to bootloader mode nothings happen(power dpad reset)... but when i do a hard reset(power + reset) its a whitescreen and i cant see anything... do you have any adie what to do mith my hima.. please need help... thanks