Hi:
I upgraded my T-Mobile PPC and lost the Radio Stack 6.02, now my phone have Radio Stack 4.14, it's dead,
I'm looking for Radio Stack U6.02 for 900/1900 t-mobile Phone Edition. Does anybody knows where I can get it?
Thanks
I did the same thing. Anyone out there help us out?
Usually you cannot downgrade a Radio Stack. I did it too and after resetting the Setup for Radio Stack 6.18 (also for t-mobile Phone Edition) starts automatically. After this it worked again.
Have you tried to hard-Reset your device (all data is lost)?
If you find a version (6.x) somewhere on the Internet, let me know. Lot's of People are looking for these versions.
Radio Stack 6.18 Found !
bknox said:
I did the same thing. Anyone out there help us out?
Click to expand...
Click to collapse
Hi.
I have now the radio stack 6.18 and my is working again, send your email and I will sent it to you. Aprox. 15MB
Enrique
Radio Stack Upgrade
Thanks ebenavides!
My e-mail address is [email protected]
Related
Hello
I'm looking for Radio Stack U6.02 for 900/1900 t-mobile Phone Edition. Does anybody knows where I can get it?
Thanks a lot!
I upgraded to the wrong Radio Stack (4.21.00) version last week. Which was a bit silly on my part. I guess that there is no turning back to another Radio Stack? That is I wish to go back to the original AT&T stack.
Please your help in this matter would be much appreciated!!
You can get the needed files to revert back to the AT&T radio stack from
the below site:
http://www.my-siemens.com/com.apert.../da/us/mw/mc/mc/ruuv1.11_cea.20.17wwe_aws.exe
Once you have it use Winzip to extact it then locate and copy the below
files to your devices windows root folder and run RSUpgrade.exe.
Needed upgrade files:
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
HTH
How about downgrading from T-Mobile 6.24 to 6.18? Do you have a link and easy instructions like you provided for the AT&T Radio ROM?
Thanks
If you're planing on downgrading back to T-Mobile 6.18 you might
as well upgrade to the AT&T stack its a lot better than 6.18.
Anyhow 6.18 isn't a separate upgrade like 6.24 its built-in the 3.14.40 ROM.
HTH
Hello Q
Will this revert my settings back to
Radio Version : 3.23.01 Original
Protocol Version: 32S54 Original ?
Regards
Thanks Qman!
I did not upgrade to 6.24 yet but was just wondering if there was a simple way to downgrade back if I did.
What is your opinion of going to 6.24? Besides the constant GPRS connection what other benefits are there?
Thanks
gotonextlevel said:
Hello Q
Will this revert my settings back to
Radio Version : 3.23.01 Original
Protocol Version: 32S54 Original ?
Regards
Click to expand...
Click to collapse
Nope you'll have:
ROM version: 3.14.40 ENG
ROM date: 11/26/02
Radio: 6.18
Protocol: 324e4
HTH
camarao said:
Thanks Qman!
I did not upgrade to 6.24 yet but was just wondering if there was a simple way to downgrade back if I did.
What is your opinion of going to 6.24? Besides the constant GPRS connection what other benefits are there?
Thanks
Click to expand...
Click to collapse
In opinion 6.24 was better than 6.18 but not as good as At&T's stack,
besides the constant GPRS connection you'll have improved power management (better battery life), improved GSM and GPRS.
:wink:
HTH
Hello,
I have a MDA 1 european version
Rom Ver : 3.18.01 ENG
Radio : 3.23.00
Because of a buisness application running on this device I could not upgrade to WM2003.
My question is could I upgrade the radio stack?
If yes wich version, and where to find it?
Do I need to upgrade the rom?
Somebody tell me that with the new rom version the MDA will charge thru the USB connection, correct?
Sorry but I'm a novice
Thanks for your help
If you arent having problems with your radio stack leave it alone is my advice.
Hi!
I have Siemens SX56 AT&T with follow Radio Stack: A.20.10
I need RA.33.02 or better for download, pls help!
soho said:
Hi!
I have Siemens SX56 AT&T with follow Radio Stack: A.20.10
I need RA.33.02 or better for download, pls help!
Click to expand...
Click to collapse
This is the original rom name version ruuv2.09c_cea.30.09wwe_aws
so I'm not sure about the radio stack in it but I'll upload it ..
I'm not responsible for any deffects!!
Still need latest Radio Stack for XDA Siemens SX56 :?
What is the latest stable RADIO-version from AT&T for SX56 (XDA)?
P.S. Except RA 20.10 of course
I need Raido Stack 4.16
I need Raido Stack 4.16 please help.
Re: I need Raido Stack 4.16
pepco said:
I need Raido Stack 4.16 please help.
Click to expand...
Click to collapse
Try this:
http://lumpistefan.dyndns.org/tools/RSU_V4.16.zip
HTH
Stefan
Thank you
Thank you !
But I can't download !
Re: I need Raido Stack 4.16
LumpiStefan said:
pepco said:
I need Raido Stack 4.16 please help.
Click to expand...
Click to collapse
Try this:
http://lumpistefan.dyndns.org/tools/RSU_V4.16.zip
HTH
Stefan
Click to expand...
Click to collapse
4.16 (GSM 900/1800) not fit for SX56 (GSM 900/1900). you will kill your SX56
what is the best radio version for Qtek1010 in middle east (SX-56)?
i killed qtek
where do i get a radio stack that works on my mobile (qtek 1010 i live in saudi arabia).
i downloaded the 4.21 from LumpiStefan webpage. now it refuses to connect to our network (Aljawal). also the device has become very slow and the synchronization cable does not work anymore.
please please please help.
i managed to get my USB connection back. but i still need the right radio stack. the phone fails to accosiate with the aljawal network. please help.
also why does it always fail (after 2%)to flash the radio stack????!!!!
you killed the phone .......
I have recently updated my Radio Stack to 3.19.01 and it is working better than the older version that the phone came with. What is the best Radio stack update that I can upgrade to (read somewhere that it is 3.23.01) and where can I download this from.
The ROM I have currently is 3.16.13 ENG (again upgraded recently) and I am planning to upgrade to 3.16.52 or WM 2003. Which one is better? Or is there some other version which is better suited.
Many Radio Versions are available on the ftp-server.....
WM2003 is good on Wallaby. Used it myself a long time.
You can get all ROMs directly from the ftp or cook your own at
http://lumpistefan.dyndns.org/
Stefan
Thanks Stefan.
I have downloaded RSU_V3.23.zip should I use this or download RSU_V3.23_PPC.zip?
Also are later versions like 4.21 better and is there a risk in updating the Radio Stack to this? Will 4.21 and 3.23 be compatible with WM2003?
Updating Radio Stack is everytime a risc.
So if all is working fine i would stay at your actuel Radio Version.
I think nearly all Radio Versions [email protected]
3.23 Radio Version is just another number used by T-Mobile.
4.21 is the Radio Version released from O2.
I made good experience with both of them.
The _PPC file is for directly flashing on your device without using active sync...
Stefan
Hi, Stefan.
I have WM2003 installed (4.01.12). I'm not satisfied with the reception quality . I tried Radio Stack 6.24.20 and 6.25.02. Should I try with another RSU and which one is the best?
fredo said:
Hi, Stefan.
I have WM2003 installed (4.01.12). I'm not satisfied with the reception quality . I tried Radio Stack 6.24.20 and 6.25.02. Should I try with another RSU and which one is the best?
Click to expand...
Click to collapse
Don´t know. never had any PW10B-device, so i can´t tell you, which one is the best.....
Stefan
IM IN LEBANON AND HAVE A QTEK 1010 AND 3.23 RADIO STACK AND NO SIGNAL