Went to update and corrupt, I give up trying to reload OS on it. I was on OS 1.5.4 global. My phone now goes into bootloader and fastbootd. Also my bootloader is unlocked. I tried the droidwin : flash-all step by step and it still didn't work and I was rooted. What method should I use and would I still be able to charge my battery in this state?
Here is a pic
Would this method work?
What's the best unbrick method I should use please? Thanks
Related
Hi All, I have unlocked the bootloader the unnofical way and i am on global 7.1.7.0(LHOMICL) with twrp and root.
I now have recieved the official sms to unlock from xiaomi.
Already i had to open the phone 3 times to get into edl mode. I really dont wont to open the phone agian.
When i try to unlock the tool answers no need to unlock. I think this is because i flashed the adapted emmc_appsboot.mbn and boot.img thru fastboot.
Do i have to change te rom to another version before i try thru edl or fastboot? What is the best procedure to official unlock now because i read a lot of bricks if they try to revert back to original state.
Can some one give me a detailed guide? Thanx in advance.
You need to flash a fully stock edl ROM on top of your current setup.
This will wipe out your hacked bootloader and throw the original (still locked) one back onto your device.
Then just unlock as usual. I did the procedure myself today already as I got my unlock notification today as well.
Ok thnx for the info. I have changed this global rom 7.1.7.0 in great extend and dont wont to lose this setup.
So can I backup my current setup with twrp with the hacked bootloader.
Flash the complete global 7.1.7.0 in edl mode. Unlock with the unlock tool.
Root the rom and install twrp.
After this can i restore the backup with the hacked bootloader with twrp?
I dont know how the unlock tool of xiaomi works, so i could leave the official bootloader in place when i do the restore with twrp and only replace system and data partition or can i flash all the parts back with twrp to keep the unlock?
Wich procedure will keep the official unlock in place or will this unlock stick always?
davegrond said:
Hi All, I have unlocked the bootloader the unnofical way and i am on global 7.1.7.0(LHOMICL) with twrp and root.
I now have recieved the official sms to unlock from xiaomi.
Already i had to open the phone 3 times to get into edl mode. I really dont wont to open the phone agian.
When i try to unlock the tool answers no need to unlock. I think this is because i flashed the adapted emmc_appsboot.mbn and boot.img thru fastboot.
Do i have to change te rom to another version before i try thru edl or fastboot? What is the best procedure to official unlock now because i read a lot of bricks if they try to revert back to original state.
Can some one give me a detailed guide? Thanx in advance.
Click to expand...
Click to collapse
Plz could you help me and tell me where you got the hacked unlocked bootloader cause I bricked my redmi note 3 pro snap dragon and only only fastboot is available and when I try to flash it I get the message device locked boot locked can not flash and plz hobe me a detaild link and downloads and how to flash also I did not get the unlock code and how to get the locked one back z original plz help best regards
Plz indeed to know how to hack the bootloader cause I bricked my phone and I need to make it life
MrColdbird said:
You need to flash a fully stock edl ROM on top of your current setup.
This will wipe out your hacked bootloader and throw the original (still locked) one back onto your device.
Then just unlock as usual. I did the procedure myself today already as I got my unlock notification today as well.
Click to expand...
Click to collapse
please give a detailed tutorial how to do it. I am now in AOSP with unofficially unlocked bootloader. How to relock it again to unlock officially?
Relock Bootloader
I see many asking how to Relock Bootloader, especially those who had unlocked unofficially.
The steps to be followed are following:
(1) Turn on USB debugging for your phone;
Go to Settings -- About Phone --> Touch 7 times on "MIUI version" to Enable Developer Options.
Now go to Settings - Additional Settings - Developer Options --> USB debugging.
Enable USB Debugging and Connect to PC.
(2) Download Fastboot ROM (file extension .tgz or .tar) from
Code:
http://en.miui.com/a-234.html
(3) Boot into EDL
adb devices (to check it's connected)
adb reboot edl
(4) Use MI Flash Tool to Flash the Fastboot ROM
PS: It is assumed that person knows how to get drivers installed for phone if not already, use ADB command as well as know MI Flash Tool basics.
@BRoy_98 @ioosis @davegrond : hope this helps.
@MrColdbird Thanks for the tip
BRoy_98 said:
please give a detailed tutorial how to do it. I am now in AOSP with unofficially unlocked bootloader. How to relock it again to unlock officially?
Click to expand...
Click to collapse
Thx
Sent from my Redmi Note 3 using XDA-Developers mobile app
Unable to relock
Someone please let me know how to relock the bootloader.
I tried flashing the global rom using flash tool but still it says unlocked when i check it from fastboot mode.
anwar08 said:
Someone please let me know how to relock the bootloader.
I tried flashing the global rom using flash tool but still it says unlocked when i check it from fastboot mode.
Click to expand...
Click to collapse
On MiFlash, select folder of Fastboot ROM, then click on Advanced, and in fastboot script select flash_all_lock.bat. After it, close MiFlash then open it again and check in advanced if flash_all_lock.bat comes selected. If yes, close advanced box and flash ROM. Don't forget to close and open MiFlash after choose flash_all_lock.bat script, it's important step. And you can do it in Fastboot mode, don't need to go to EDL mode to flash the ROM.
andersonaragao said:
On MiFlash, select folder of Fastboot ROM, then click on Advanced, and in fastboot script select flash_all_lock.bat. After it, close MiFlash then open it again and check in advanced if flash_all_lock.bat comes selected. If yes, close advanced box and flash ROM. Don't forget to close and open MiFlash after choose flash_all_lock.bat script, it's important step. And you can do it in Fastboot mode, don't need to go to EDL mode to flash the ROM.
View attachment 3854529 View attachment 3854530 View attachment 3854531 View attachment 3854532
Click to expand...
Click to collapse
Am using the 32 bit beta version and there is no Advanced option
anwar08 said:
Am using the 32 bit beta version and there is no Advanced option
Click to expand...
Click to collapse
see if it's in Configuration.
warranty
does rooting redmi note 3 void warranty bcuz it has a locked bootloader and cannot root without unlocking it ????
and can we lock bootloader again for warranty claims ????
plzz help ???
ty.
Why can't we directly update the device..
Like after flashing miui ROM (7.1)then installing (8.1)....will the bootloader get locked....
?....somebody have any idea place help out
Q. Can the device be rooted without voiding warranty?
A. Yes, by unlocking the BL unofficially.
Q. Once rooted and on MiUI, can I update using Updater?
A. No! You'll lock your BL and end up in a bootloop. Instead, use the updater to download the zip file, reboot into recovery (TWRP or ZCX) flash the zip first and then the universal boot.img patched/lazy flasher and reboot to system.
I followed the method mentioned in the replies to relock the bootloader, i.e, flashed the fastboot rom in edl mode
But for some strange reason, when I entered the fastboot mode and checked whether the bootloader is locked or not by "fastboot oem device-info", it said "Device Unlocked: True"
The main problem came when I booted into the ROM; It broke all kinds of wireless connections. The wifi malfunctioned, the phone wouldn't read the SIM cards etc.
Is there a solution? Please help
Thanks
I've been using custom ROMs for a while on my A2017G but decided to get back to stock. Before doing all the bootloader unlocking/rooting etc I backed up my original firmware (Nougat, B09). So I reinstalled the original firmware that I had backed up but somehow lost TWRP in the process (the bootloader is still unlocked). I then used Axon 7 Toolkit to re-install TWRP. Unfortunately I cannot get to bootloader mode through Android Recovery as it reboots normally. Axon 7 toolkit gives me the following notice 'If your device rebooted normally then your device has no access to fastboot. Follow the miflash instructions for the bootloader unlock option to restore your device's fastboot mode'. The thing is the phone is bootloader unlocked so I don't need to unlock again.
Basically, I cannot install TWRP through bootloader mode. I also tried adb-fastboot tool from my Pc but same thing happens, phone reboots normally.
What I really wanted is bring back the phone to full stock, including re-locking the bootloader.
I also want to have the bootloader re-locked again before selling the phone.
Any help/ suggestions much appreciated.
Good lord, don't use the Q&A mode for a simple question. XDA Labs opens it on a browser window
Follow Controllerboy's guide, but only the part where he installs TWRP with axon7tool. After that, boot into TWRP and follow raystef66's guide on how to get rid of the 5 seconds screen. That'll give you fastboot. Then flash a full stock system, stock recovery, and you'll probably be safe enough to relock
But I'd ask the next owner if he/sge actually cared on having the bootloader unlocked. Relocking it is risky as $hit you know.
Sorry, am kind of new and was not sure which way to post my comment. Thank you for responding and the advice. I managed to install full stock, actually downgraded to Marshmallow so I can get to fastboot/bootloader mode now. Thanks again.
You can still have bootloader mode on Nougat if you follow raystef66's guide. Plus it will hide the 5 secs screen
Actually I discovered I can't get into Fastboot mode from stock marshmallow so guess it's back to nougat with raystef66's guide.
Guys, I need you :angel:
I have a P10 Plus (VKY-L09C55B142) and I tried to debrand (with L29) it but something went wrong. At first boot, I noticed that the OEM information was wrong (under phone's information menu I can see: name ONYX D189, model D189-L29, serial: NRD90M test-keys). After that, trying another guide, my phone bricked with FRP locked (and I can't activate it because it switch off itself) and bootloader unlocked. So I purchased DC Phoenix (3 day) to solve FRP that now is unlocked. But now my phone doesn't boot on Android; I can only use fastboot and recovery (I can install TWRP). If I try to flash something, erecovery start to install but stuck at 5% (even with DC Phoenix).
What can I do?
I made a backup with TWRP before do any guide but I don't know if it's usable
need full stock firmware by HWOTA
Gamkutopolowk said:
need full stock firmware by HWOTA
Click to expand...
Click to collapse
Do you know where I can find necessary files?
see what happened to me
https://forum.xda-developers.com/showpost.php?p=75355361&postcount=40
you can recover and rebrand to dual sim using this how-to and the files from the same post
https://forum.xda-developers.com/showpost.php?p=72416532&postcount=10
which and the end worked for me. You need time, patience and a SD card and few reboots.
Could be necessary a factory reset but only if you have bad luck
ps assuming that you have the code for boot unlock
http://www.stechguide.com/huawei-p10-plus-b181-nougat-update/
download three files from firmware finder C432B181
only methode 1
This is the process I followed to reset my p10 + phone to original stock, it is in Spanish but it is easy to understand.
video clic
Hello!
I am in need for help. I been fiddling around with the phone to update it to the latest version, A2017G Nougat B10. However now I am stuck with no bootloader or fastboot.
Looking through the forum only gives me fragmented answers and no proper structure. I have already the drivers and tools ready to use however I can't get the phone into bootloader mode nor fastboot. It will just restart and say the bootloader is unlocked and proceed to go on.
I wish to get the bootloader and fastboot back to normal aswell get it locked.
Is there a step to step guide?
Thanks in advance.
I am attempting to return my Axon 7 A2017G to complete stock so that I can use the warranty. I used the EDL tool to return to latest stock oreo, but it seems that there is no way to access fastboot/bootloader on this update. I've found many guides for other models or older versions on how to get fastboot but none of them seem to be specific to my model and I am not than keen on bricking my device again. Could anyone help me out on what process I should go through to be able to lock my bootloader?
This is the EDL package I flashed: A2017G_B03_OREO_FULL_EDL
Spooderman46 said:
I am attempting to return my Axon 7 A2017G to complete stock so that I can use the warranty. I used the EDL tool to return to latest stock oreo, but it seems that there is no way to access fastboot/bootloader on this update. I've found many guides for other models or older versions on how to get fastboot but none of them seem to be specific to my model and I am not than keen on bricking my device again. Could anyone help me out on what process I should go through to be able to lock my bootloader?
This is the EDL package I flashed: A2017G_B03_OREO_FULL_EDL
Click to expand...
Click to collapse
I'm not even sure if you can lock the bootloader in stock+ Oreo, but it should be possible. What you can do is go back to MM (MM B10 should be fine), then use a fastboot package for MiFlash (such as A2017U_FASTBOOT_UNLOCK_EDL, it works even though you have a G) or maybe check if EDL Tool has an option to install fastboot, i don't remember.
The other way around it is not locking it and just using a modified bootloader to conceal the 5 second screen. Good enough for sending the phone with warranty. If you'll sell it you might be able to sell it for more if the bootloader is unlocked
Choose an username... said:
I'm not even sure if you can lock the bootloader in stock+ Oreo, but it should be possible. What you can do is go back to MM (MM B10 should be fine), then use a fastboot package for MiFlash (such as A2017U_FASTBOOT_UNLOCK_EDL, it works even though you have a G) or maybe check if EDL Tool has an option to install fastboot, i don't remember.
The other way around it is not locking it and just using a modified bootloader to conceal the 5 second screen. Good enough for sending the phone with warranty. If you'll sell it you might be able to sell it for more if the bootloader is unlocked
Click to expand...
Click to collapse
Thanks I checked the Axon 7 Toolkit and turns out it does have fastboot unlock as part of the process of unlocking the bootloader. Though it techinically doesn't support Oreo I chose the nougat one and it still did the trick albeit with another hardbrick, once locking the bootloader I had to wait for the battery to drain again before I could get into EDL and flash back to Oreo. Very painful proccess, would not recommend, should have just used your method of going back to marshmallow locking then updating again. Thanks anyway mate, the help was much appreciated.
Spooderman46 said:
Thanks I checked the Axon 7 Toolkit and turns out it does have fastboot unlock as part of the process of unlocking the bootloader. Though it techinically doesn't support Oreo I chose the nougat one and it still did the trick albeit with another hardbrick, once locking the bootloader I had to wait for the battery to drain again before I could get into EDL and flash back to Oreo. Very painful proccess, would not recommend, should have just used your method of going back to marshmallow locking then updating again. Thanks anyway mate, the help was much appreciated.
Click to expand...
Click to collapse
I never mentioned the axon7toolkit. That one is finicky, I don't recommend it. I was talking about EDL Tool (you might even find it if you google it), it's here in the ROMs, kernels, development section.
Spooderman46 said:
I am attempting to return my Axon 7 A2017G to complete stock so that I can use the warranty. I used the EDL tool to return to latest stock oreo, but it seems that there is no way to access fastboot/bootloader on this update. I've found many guides for other models or older versions on how to get fastboot but none of them seem to be specific to my model and I am not than keen on bricking my device again. Could anyone help me out on what process I should go through to be able to lock my bootloader?
This is the EDL package I flashed: A2017G_B03_OREO_FULL_EDL
Click to expand...
Click to collapse
you need to flash original stock rom for your device trough edl. (rom your device came from factory,you need B11 marshmallow)
then boot into system,unlock developer options.Allow oem unlock and turn on usb debugging.Now connect phone to laptop and check the dialogue on your phone that ask for usb debug.Unplug phone.
When you did this you want to flash TWRP trough EDL.
Now boot in TWRP and flash UnlockbootloaderPackage from DrakenFX.
Reboot system.
Now turn off your device and boot into fastboot,connect your phone with laptop and open ADB terminal on your laptop or use Axon7toolkit.
In terminal enter fastboot oem lock,or in axon7toolkit choose lock bootloader.
Your bootloader is now locked.
PS: you dont need locked bootloader to recieve ota's,and make sure you are on the firmware your device came shipped with!!
You need a locked bootloader to get rid of the warning message ( dont flash any mod package that claims it delete the warning page)
Predatorhaze said:
you need to flash original stock rom for your device trough edl. (rom your device came from factory,you need B11 marshmallow)
then boot into system,unlock developer options.Allow oem unlock and turn on usb debugging.Now connect phone to laptop and check the dialogue on your phone that ask for usb debug.Unplug phone.
When you did this you want to flash TWRP trough EDL.
Now boot in TWRP and flash UnlockbootloaderPackage from DrakenFX.
Reboot system.
Now turn off your device and boot into fastboot,connect your phone with laptop and open ADB terminal on your laptop or use Axon7toolkit.
In terminal enter fastboot oem lock,or in axon7toolkit choose lock bootloader.
Your bootloader is now locked.
PS: you dont need locked bootloader to recieve ota's,and make sure you are on the firmware your device came shipped with!!
You need a locked bootloader to get rid of the warning message ( dont flash any mod package that claims it delete the warning page)
Click to expand...
Click to collapse
Repeatedly posting the exact same thing in every thread will only get you banned again, you sure you want that?
SaintZ93 said:
Repeatedly posting the exact same thing in every thread will only get you banned again, you sure you want that?
Click to expand...
Click to collapse
Sorry