Related
The purpose of this thread is to have all information regarding the Weloop Tommy, gathered, fresh and to the point.
(i am not affiliated with Weloop)
Please read both post number 1, 2 and search thread before asking questions thank you.
FAQ
Q:What is the latest firmware?
[Release] black watch v3.19 firmware update notifications [Copy link]
This update to the firmware update, the client does not update the current firmware version v3.18 firmware watches friends can try to use the old client detects the firmware update.
Update:
Solve watches restart, restore factory settings watches language will change.
Download Link:
iOS client 2.079: http://fir.im/iosobt
Android client 1.29.3702b: http://fir.im/andobt
Unofficial file archive of WeLoop Tommy. APK-Files with ending "b" are BETA http://www.wtf.li/
Q: When is the next app update
A: Weloop v. 3.0 will be released as closed beta 7the of March 2015 we don't know when there will be an open english release....
the extensive update 3.0 have,
better health monitoring
profiles
sleep monitoring
more alarms weekdays/weekend
and more.
(see attached pictures for app version 3.0 UI improvements
Q: What does the settings do?
- Backlight
24H: Backligth always turns on when button is pressed
Nite: Backligth turns on when button is pressed at night time (from 17–8)
Off: Backligth Always Off
- Motion
24H: Motion detection always on (backlight turns on when motion is detected)
Nite: Motion detection on at night time (from 17-8)
Off: Motion detection Off
- Night
On: Notification vibration disabled at night (from 23–8)
Off: Notification enabled at night
- O Clock
On: every whole hour the watch will vibrate. 12'O'clock etc.
Off: Off
- Fitness
On: Fitness functionality on
Off: Off
- Language
Chinese
English
- Anti Loss
On: Alarm when Phone is out of BT range
Off: Off
Q: Is there Cyrillic support
A: Yes
Q: The GoClever Ecos Chronos is the same watch right?
A: Yes it is on the hardware side, and you can with a "hack" install the firmware from the ECOS on the Tommy. (see next post for How to.!)
Awesome Weloop Review by VECTRON
http://forum.xda-developers.com/smartwatch/other-smartwatches/weloop-tommy-smartwatch-looks-best-t2864444
Troubleshooting
Q: i can not update my watch/its stuck/acting weird
Have you tried to reset the watch? there are 3 ways to do it
Restart watch from app. under update there is a restart button (it says reset but it restarts and keeps all your settings)
Reset from watch (Last menu point, this resets everything)
Hard reset (connect charge cable and press up and down button to reset)
Force OTA update:
Connect your watch to the charger. (watch must be charging)
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device and it cannot connect, try an ios device, and vice versa
Q: The watch keeps switching back to chinese
More people have experienced that if the language is non english the watch will reset to chinese. Changing the phone OS to english stops the watch from switching to Chinese.
"Hacks"
How to make your own watchfaces:
user fcsabika has created a cool tool to create your own watchfaces
WeLoop Tommy Watchface Creator
attached are also some watchfaces made by user ruicoel filename "project rui.zip"
How To install GoClever Chronos ECO firmware on Weloop tommy (android only)
Download latest ECO firmware to phone
Disconnect Watch from phone, install ECO app
Go to “Check For Upgrade”
Tap on the middle circle six times
“Select a firmware file___ [Browse]”
Watch must be in forced OTA
Update watch.
You can flash between weloop and Goclever firmware (always be careful and follow instructions when flashing, i take no responsibility for bricked or exploding watches...)
To install weloop firnware, follow same instructions but use weloop app instead.
PROJECT OPEN FIRMWARE (please make sure you understand what this is and what it does before you attemtp to flash your watch)
Make a Weloop Tommy an open source sport watch that can be used without a mobile phone. Want to see a heart rate when running, cycling speed and cadence when cycling or number of laps while swimming? Help to make it possible! LINK
This project is divided into six phases:
Phase 1: find out and document watch pinout so it will be possible to communicate with screen, accelerometer and a flash memory from a custom firmware. DONE
Phase 2: write a custom firmware that will print sample text on a screen and expose a BLE service. Firmware will be flashed using SWD connector. DONE
Phase 3: make it possible to upload a custom firmware using OTA. This will save the waterproof case from destruction. DONE
Phase 4: update softdevice to the newest version (S110 8.0.0). Add possibility to switch to other softdevice (S120/S130) DONE
Phase 5: create a "terminal" firmware that allows to control what is displayed on a watch from an android/iOS app. IN PROGRESS
Phase 6: create a "standalone" firmware using S130 softdevice that can connect to external sensors (HRS, CSCS etc) without a phone. TODO
Go support developer Krzysiek
Goclever APK & FW file is attached to this post.
Latest Chronos ECO firmware 3.18
http://www.chronos.goclever.com:8080/fileServer/firmware/CHRONOSECO_V3.18_1.bin
Chronos ECO app (android)
https://play.google.com/store/apps/details?id=com.yf.foreign.goclever
Chronos ECO IOS app
https://itunes.apple.com/th/app/goclever-chronos-eco/id955306578?mt=8
BUGS & Annoyances
Notification not always deleted from phone when deleted on watch
Watch freezes sometimes
Being able to set the night time manually would be great (This can be done with the Goclever fw)
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
Thanks was this working on ios or android?,
will add to FAQ
taleboblen said:
Thanks was this working on ios or android?,
will add to FAQ
Click to expand...
Click to collapse
Android.
Thx
Thnx for the information, all working ok on my samsung s4, get the last version v3.18.
thx again
backlight
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
chsustik said:
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
Click to expand...
Click to collapse
Thanks for the update. i decrypted some of the information from the official Weloop FAQ. and yes i can now confirm that you are right. it turns on from 17-8 thanks again. I have now updated the FAQ with the correct time for all Night settings. :good:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
Hi , the chronos eco app is not compatible with the Weloop Tommy.
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
l.capriotti said:
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
Click to expand...
Click to collapse
Happened to me also, try to delete connection under bluetooth settings on device. now connect to to weloop and pair from Weloop app. keep trying and then go to update. again persistence is key. keep trying to update suddenly it will connect and update.
Whas the watch on latest firmware when you tried the force OTA?
are you on android or ios see if there is an updated App for you phone. see link on OP for beta APK.
let me know if it works.
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
l.capriotti said:
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
Click to expand...
Click to collapse
Try to update the Weloop app, latest is 1.27.
kill weloop app
delete bt connection from phone.
Open weloop app
conmect and update. Keep trying it can take a couple of times.
If all fails if possible try with other device and or ios device
update: I used an iphone and after a few retries I got it on v3.18.
back to android, but the pairing and the sync is problematic, to say the least, on my Huawei P7...
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
SifJar said:
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
Click to expand...
Click to collapse
Thank you for the insights and findings its all very promising. :good:
On a sidenote:
I talked to one of my colleagues who is an engineer (i'm not a dev but a Designer), it seems like we in the office are playing around with the exact same SOC from NordicSemiconducter. we tried one of the apps from the google play store and it connects to the weloop(see attached pic). The app was called "nRF Master Control Panel", tried the other apps from NordicSC but no luck.
Hopefully there will be some sort of SDK with the v3.0 release on the 30th...
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
SifJar said:
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
Click to expand...
Click to collapse
Thanks for the confirmation. :good:
taleboblen said:
Troubleshooting
Force OTA update:
Connect your watch to the charger.
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device try an ios device, and vice versa
Click to expand...
Click to collapse
I tried to use the OTA update to go from 3.17 to 3.18 (on Android) but Tommy stuck on screen "WeLoop ... Udating 0%", my smartphone (HTC M8) with its APP (latest version) dont find the Tommy and it remains bricked, how do I restart it? I tried all combinations, but remains on the screen, help me!
I brick firmware with watchfaces .I delete current downloaded watchface and now no menu no watchface just boot and stay black screen.Ithink I need firmware and how to install ? Processor MT2502CV (can't find)
paliacho said:
I brick firmware with watchfaces .I delete current downloaded watchface and now no menu no watchface just boot and stay black screen.Ithink I need firmware and how to install ? Processor MT2502CV (can't find)
Click to expand...
Click to collapse
I had a similar problem, apparently caused by installing new faces at once
I solved it, with the cell phone, connected via Bluetooth
1. Turn on the smart watch in the same way as the video shows (read step two before)
2. Make sure you have active Bluetooth (dragging your finger from top to bottom, but Important !!! before you remove "welcome").
3. Open the SmartDevice Fundo App on your cell phone and connect via Bluetooth, insist, because it falls frequently.
4. "My Applications" of App, open menu at the top right and "undo all VXP Items" (try it 4 times until I succeeded)
5. If the smart watch is activated, restore from factory to configuration / restore
luck
:bueno:
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
paliacho said:
I brick firmware with watchfaces .I delete current downloaded watchface and now no menu no watchface just boot and stay black screen.Ithink I need firmware and how to install ? Processor MT2502CV (can't find)
Click to expand...
Click to collapse
I had a similar problem, apparently caused by installing new faces at once
youtu.be/ieAVjumTQtI
I solved it, with the cell phone, connected via Bluetooth
1. Turn on the smart watch in the same way as the video shows (read step two before)
2. Make sure you have active Bluetooth (dragging your finger from top to bottom, but Important !!! before you remove "welcome").
3. Open the SmartDevice Fundo App on your cell phone and connect via Bluetooth, insist, because it falls frequently.
4. "My Applications" of App, open menu at the top right and "undo all VXP Items" (try it 4 times until I succeeded)
5. If the smart watch is activated, restore from factory to configuration / restore
luck
Hi, video is not available...
facing the same problem ... any alternate way
---------- Post added at 08:58 PM ---------- Previous post was at 08:35 PM ----------
niteshbagde17 said:
facing the same problem ... any alternate way
Click to expand...
Click to collapse
although it worked... all you need to do is keep patience ..and repete the turn on and off process for watch till it gives you a popup of bluetooth connection ..
i was forcing my android device to connect to that particular targeted device ... and it finally gived me the pop up...for connecting....
still firmware can be better alternative some times....
any one know where to get this firmware/update ----> https://www.youtube.com/watch?v=rXdTAPAKVKw&t=598s
Need Newwear N3 Pro firmware.
Hi, I solved the problem by flashing with Diggro Di03 firmware. But I will be grateful anyone could send the original firmware.
Where did you download the files to diggro DI03 ?
HI, My DZ09 Is DIFFERENT because it does not have any voice recorder app and it has an unchangeable black wallpaper and also facebook WhatsApp apps don't work. No browser app and 4 dumb watch face... the camera doesn't work without memory card putting on it... here is what info I got from codes:
[VERSION]: X9M_1.0_COBSLW_RQ_LSSD_DZ09_9307_SL3029_6133_0821_J_LANA_V1.2.8
BRANCH- 11BW1308MP
V15D_CSM
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME]
2018/09/13 15:35
[MRE VERSION] 0
HAL_VERNO:
BB CHIP: 6260A 5.33MHZ
1.56" 240X220 PIXELS
Tried all the scatter files I can get but every time the same problems happening, I want to create a backup to get the recorder app and some good watch faces but every time I press the readback button, it fails with this two error... tried a lot of scatter files.....
ERROR 1: MAUI NOT COMPATIBLE WITH DEVICE ERROR 5029 MAKE SURE MAUI LOAD MATCH THE TARGET
ERROR 2: STUCK AT 0% FOR SOMETIME AND AFTER THAT FLASH TOOL ERROR
Please help me to solve these errors and make a backup ROM:crying::crying::crying:
Hello !
I have trouble with bought alps device car head unit FF5000 (model 8227L).
System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work as they are non existant (with SWC also), after car shutdown when HU shutsdown memory empties and resets data like date and time etc.
Can anyone help me bring this HU in order again ?
I don't know what to do anymore, it worked perfectly for three days and then in a sudden started problems.
I tried so far erasing data to factory default but problem still exist.
I will post system data on request... for now have this image of system :
MODEL: 8227L - android 8.1 (displays as Android 10) - patch from March 2019 alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1550113051:userdebug/test-keys
HMI: TSKJ.C.Q.F3.C04.2020.27.08.30
MCU: JUST SAYS H BUT IT HAS ITS NUMBER CANT SEE IT
MEDIA: NULL - MUST BE SOMETHING HERE ASWELL
BTV: BT.19.11.12.1200 (mac ADDRESS)
CAN ANYONE HELP ME WITH THIS PLEASE TO UPGRADE/UPDATE DO SOME THING and turn this hu BACK in life ?
Help with Alps FF-5000 Android 10
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Well, you would do me a great favor if you would provide them to me. I write to you privately.
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
I SOLVED MY PROBLEM WITH THIS DEVICE
It was GPS antenna. Its interference or faulty receiver loses MCU settings in memory. Once disconnected all turns normal.
Do the following :
- diconnect gps antenna
- disconnect radio antenna and then reconnect while ignition is on (gps antenna disconnected)
- turn ignition off, press button reset while turning ignition key, release reset and wait for device reseting
- adjust device settings again and enjoy the music !
+ get a new gps antenna !
:good:
FOR SOFTWARE UPDATES PLEASE CONTACT YOUR SELLER OR download from :
(I assume that yours is android 8.1 - upgraded to android 10)
https://yadi.sk/d/umCvHqCDzHccr
!!! PLEASE TAKE NOTE THAT YOU MUST CHOOSE THE RIGHT MCU AND SOFTWARE !!!
ALPS FF5000 model 8227L
nolimitzr2 said:
I have a full backup of boot_1 boot_2 and emmc_user partitions. It’s for 2g-32g model 8227l
It’s fake android 10 with api27 which is 8.1 Oreo if that helps
Includes SU binary that’s not hampered from factory. Eonon had SU binary but was not functional per se.
Click to expand...
Click to collapse
Hello, do not intermix al softwares in order to get device working !
Download and install with usb/SD card : https://yadi.sk/d/umCvHqCDzHccr
IF THIS LINK IS NOT HELPING YOU....
I'M UPLOADING MY SOFTWARE FOR AC8227L DEVICE THAT MY SELLER PROVIDED ME :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
- it is CHS_8227_8_UI4_Android10_ver3_2019
After install use skin changer or launchers from page 14 !
Cheers to all !
ALPS FF5000 model 8227L
Javierlopcast said:
I am also interested in this topic, I have the same unit and I would like to get the original Android 10 Firmware, since I changed it for a lower one, if someone knows how to Root this model, it could help us both.
Click to expand...
Click to collapse
You don't need to root anything just update software (if not already wiped out).
Download and install in device thru USB / SD CARD :
https://drive.google.com/file/d/1Ta2vL7Fc8tWmzmRxaJ-JMYGmlYYnRmud/view?usp=sharing
thank you very much! Do you have a screenshot of how the Launcher looks like?
Reboot problem
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
ALPS FF5000 model 8227L
Javierlopcast said:
I have installed the one sent to me by @antonTNTand it works, but every time I turn on the unit, after 10 seconds a window appears with a countdown and two options, "cancel" or "update" and the system restarts automatically, and it starts in "usb detected" mode while the pen drive is unplugged, it is quite annoying since it delays the start of the unit every time I get in the car.
https://ibb.co/6P80pDP
Click to expand...
Click to collapse
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Anton TNT said:
Turn your usb stick or SD card with software back in port... Then when boots up just click on update. If window not removed after update, go to main menu with password 8888 and find others menu or the one in which to set all settings for device and declick one for updates/software/firmware.
Or maybe usb or SD card with software in it is just stuck in memory and android detects update and wishes to install. If this is the case, unplug usb /SD card clicking on usb icon on lcd and then press eject and then safely remove stick.
Keep me updated will help you out.
Click to expand...
Click to collapse
I already found the problem, it had the .BIN files copied to the root of the internal memory of the radio, and every time it is turned on it detects them and restarts in USB reading mode. I deleted them and the problem is over
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
ALPS FF5000 model 8227L
ashensii said:
Would someone please send license.dat file, my headunit saya it's not activated after I upgraded firmware?
Click to expand...
Click to collapse
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
Well I did code 9191 which clears license code afaik. I installed fw that you uploaded, it went well but still my headunit says activation file not found. But atleast my volume button.(knob) is working now with that fw. Fm freq is restricted to under.90 mhz, but if you are quick enough, you can save bigger frequencies aswell.
My hu is alps 8227l ff-5000, bought from aliexpress, seller claimed it to be hizpo branded but there is no hizpo logo anywhere in frame.
Anton TNT said:
You don't need one it will generate automatically when installed software that matches your device and mcu.
Look for software on links that I pinned here in posts, or try find and install the correct one here :
https://yadi.sk/d/umCvHqCDzHccr
NOTE: if your device is not ALPS 5500 then you must follow posts for links that matcgh your device !
Click to expand...
Click to collapse
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
ashensii said:
I found license.dat from 4pda and with fw you provided all my problems are solved. Thank you.
Click to expand...
Click to collapse
Well glad I could help in some way.... Hit the thanks meter if helped...
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
sheerness said:
hi guys sorry to jump in but I am not finding or getting any help. I think I to reflash my device but cant find a download anyware and NOT getting any help from seller,
please can anyone (HELP) me in finding this software or even an upgraded version
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
kernal 4.14.116 (gcc version 6.3.1 20170404 linaro GCC 6.3-2017.05 ) ) [email protected] #12
Click to expand...
Click to collapse
Hi, please, this is forum for ALPS 5000 8227L device only try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Anton TNT said:
Hi, please, this is forum for ALPS 5000 8227L device onlčy try to put your search for right device
I can help you out with this, can I get some info where this kirinavi is bought ? Ali Express?
And can I get screenshot of device settings (MCU, media, bluetooth, device model, real android version of device etc.) - go to infotainment or similar settings menu and put screenshots.
Click to expand...
Click to collapse
"THANK YOU SOOOO MUCH"
for getting back to me, i have tried for months to try and get some help with this and you are the only one that has got back to me!...
yes i did get the system from aliexpress but not getting help from them since they have had the money,
i think i have added the pics to this, if there is anymore info you are needing please let me know,
again thank you so much :angel:
Q18 Chinese Smartwatch (Actual clone of model is Atm unknown assumed DZ09) see pic for style reference there maybe others with same internals.
Chipset/CPU: MTK ARM MT6260MA
Version Line(might not be real version):
MX6XM-COB-Q18-9340-WKD-6113-HYBR-V06.740-20200910
MRE VERSION: 3100
MRE INFO :
Size: 472336 (not sure if it's mb or what doesn't say)
[SUPPORT MODULES]:
base
resmgr
comm
sm
res
c
ch
draw
gfxold
image
ime
ini
mul
xml
aud
camera
cell
pb
sim
sms
status
tel
timer
launch
Dialer Codes will label as I get info
*#66*# - (I assume what *#00000000# on DZ09 does)
*#3646633# - Device, Misc- (MRE and Memory dump)listed
*#1234# A2DP Mode toggle (not sure what it means)
*#8375# same as DZ09
*#87# same as DZ09
*#06# same as DZ09
------------------
Flashtool does recognize this for ROM dumping however have not found a correct scatter and readback addresses.