Kunfine android 10.1 head unit - Android Head-Units

Hi all... i am not sure where to post this, because i am not sure what kind of head unit it is. All in know is that it is a Kunfine 10.1 android.
When I bought the unit, there use to be an option (when pushing the menu button on the steering wheel controls) to switch between navigation, music, video, radio or what ever i want to open whithout taking my hands off the steering wheel. But then all of a sudden it stopped doing it. Now if i press the menu button it goes to google. In fact the speech button, and both phone buttons on the steering wheel revert to the same (google). It is only the volume + and volume - and skip (Forward)(back) buttons that are working normally. i informed Kunfine and they said i have to configure the canbus.... I have tried it 100000000 of times. IT DOES NOT WORK. I have a Hiworld canbus and i drive a Toyota Hilux 2.4 GD6 2017model. There are no Hilux option when configuring... Please help if possible and if there is no option for the hilux in the configuration, what must i choose. I tried the Prado/Rav4 option.

Not Android Auto, requested moderator move to Android Head-Units forum.
Op, take time and enjoy xda.

Does anyone know what is going on? Why does this happen and what can i do to try and fix it.

Related

Steering wheel control problem

I recently bought and installed a new Joying PX5 unit. Model # JY-UO135P4
I've got most everything working the way I want except for my steering wheel buttons. They work fine as long as I don't have my headlights/parking lights on. When they're turned on it changes the way the buttons are mapped.
Anyone seen anything like this before? Is there a setting I'm missing somewhere?

problem with assigning steering wheel keys

Hello,
I just received my new PX5 android 8.0 head unit for my Kia sportage 2016.
I`m pretty satisfied with the product, everything seems to be working pretty well, except one annoying issue which is, that I can't re-assign the steering wheel keys. the buttons work, I just can't change them. The list is empty. I tried pressing every button multiple times, or holding it.
I pretty much tried everything, including changing the canbus parameters. Nothing works. I basically only looking to change 3 buttons (the switch, and the call on/of buttons), so I wonder if there is any app that does just that.
My unit:
Model: PX5
Version: 8.0.0
Kernel: 4.4.93+, [email protected] #336
MCU version: MTCE HA V2.89 1
Canbus options:
15 Hyundai&kia (simple)
Type: 0
Key mode: Normal
I would much appreciate any help or advice.

Please Help Me to Identify this Unit

Hello,
I just bought his 9" Unit. Could anyone please help me to identify this unit and the Firmwares compatible with this unit. I also need the Password for Factory Setting, please.
Thank you and Appreciate your help...
Bump!
looks like any 8227L android unit that is faking it's android version it is not android 10 but 8.1.. good news is that it does not fake the RAM size (4 gig)... but is does seem to fake the internal storage size (12 Gig)
you have a head unit with physical buttons.. (volume dail, home, back, next etc etc)
password for factory menu should be 8888 and for startup screen logo 5678
most 8227L button fw's should work, just use the ones that are for landscape mode. more and more come available for portrait (tesla style) head units.
dutchcommando said:
looks like any 8227L android unit that is faking it's android version it is not android 10 but 8.1.. good news is that it does not fake the RAM size (4 gig)... but is does seem to fake the internal storage size (12 Gig)
you have a head unit with physical buttons.. (volume dail, home, back, next etc etc)
password for factory menu should be 8888 and for startup screen logo 5678
most 8227L button fw's should work, just use the ones that are for landscape mode. more and more come available for portrait (tesla style) head units.
Click to expand...
Click to collapse
Yes... It cannot be Android 10! Is there any suggestion for Firmware Please. Also, I tried in 8888... But it didn't work.
Is Button version of 8227L compatible with this unit?
no you'll need the touch version.
the buttons version means it is made for units with physical volume, home, back, mode, navi etc buttons on the unit itself.
the touch version is for units with the row of touch buttons you have on the left.
both versions have swc (steering wheel controls) in them.
dutchcommando said:
no you'll need the touch version.
the buttons version means it is made for units with physical volume, home, back, mode, navi etc buttons on the unit itself.
the touch version is for units with the row of touch buttons you have on the left.
both versions have swc (steering wheel controls) in them.
Click to expand...
Click to collapse
Thanks mate. Is there any sites I can download the firmware for this unit. The Firmware in this unit is a crap... It doesn't even have an equalizer in it! I really appreciate your help
dutchcommando said:
no you'll need the touch version.
the buttons version means it is made for units with physical volume, home, back, mode, navi etc buttons on the unit itself.
the touch version is for units with the row of touch buttons you have on the left.
both versions have swc (steering wheel controls) in them.
Click to expand...
Click to collapse
Thanks, mate. Is there any sites I can download the firmware for this unit. The Firmware in this unit is a crap... It doesn't even have an equalizer in it! I really appreciate your help
right here on this forum there are a few tried and tested firmwares.
a short search should get you going..
i don't have any links available at the moment here..

[Head Unit][8227][alps-mp-o1.mp5][TS907] Swc no more working

Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
hi, did yous solve this?
Pinabello said:
Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
Click to expand...
Click to collapse
Do u knw how to change the screen resolution of a vertical Android screen in reverse screen ?
tonyj224 said:
Do u knw how to change the screen resolution of a vertical Android screen in reverse screen ?
Click to expand...
Click to collapse
Hi.
I have the same version as you. Unfortunatly I can't help you. I just know that the swc are related to the canBus box.
But I would like to know if, by any chance, you have this HU installed in a Peugeot.
Do you have any idea what is this?
Pinabello said:
Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
Click to expand...
Click to collapse
Hi!!! I would like to be a develloper as well! My unit is made of 2 parts: The radio and the Screen. Is installed (and perfectly fitting) a Peugeot 307 Phase 2 (I guess phase 1 are the cars with a smal display for temperature and time. Phase 2 are the cars that had a GPS originaly, and a upper screen - not a display). For me, the problem is that the software dont allow you to choose wich car type you have. I can select Peugeot 307 but not the type. My CanBus is HiWorld. It says 307, but not specific model. I would like this changes: When I press the button for OnBoard Computer, It should go to the trip menu. Also, the car Settings (like AC and door lock) are not working and they blink (selected, notSelected).
There is a miscomunication there. I cant find help!!!!

Problem with Steering Wheels Keys on Trafic 3 and PX5 Update.

Hello, I made a mistake by wanting to update my PX5 to Android 10.
In a tutorial I had seen, it was marked to update my MCU, through a link if I wanted to be able to update Android.
Done, my configuration got erased, including my steering wheel controls.
I have reverted to android 9 but nothing helps. Everything worked before, but today the buttons do not match or do not work with my commands.
When I learn the commands, I have a black screen, with pressing a key to learn the command, but nothing happens.
I can however raise and lower the volume. I have an opel vivaro from 2017 (copy of Renault Trafic 3) and I have this car radio https://fr.erisin.com/products/eris...vr-renault-dacia-duster-logan-sandero-dokkerx
Before the update everything was working. I've been looking for months on the forums and on google, I can't find anything
Thank You !

Categories

Resources