Related
Hi
I intend to purchase those GPS map navigation software.
Do I need to purchase anything else?
Which gps navigation maps are you referring to, there are many different options, if you want just maps then you need nothing more, however if you want navigation guidance and your position on screen then you will need a gps system as well.
Those that can help you to navigate the road type.
Just found out that I might need to get a GPS reciever. It is true?
Which type is the best for our phone?
Lazibone,
If you have a maping software but do not have a gps hardware then you can use the map to get directions, search for plances, intersections and such. A GPS hardware would tell you your position on the map continuously and will guide you on the road through visual and voice prompts. a stand alone map without a GPS is useful but you have to find out where you are. I use mapopolis platinum without gps in the united states and it works great. I can get point to point detailed directions, search for places, intersections, points of interests, bottom line: I am never lost. If you want a gps hardware for your XDA II you have two options: wired mouse gps and bluetooth. Beware that Bluetooth gps are being reported to have serious problems with the XDA II bluetooth and most of them do not funcion on the XDA II. as a wired GPS well, I think they work fine. I suggest you go to www.pocketgps.com or visit some of the threads on this forum that disscussed gps systems soroughly.
Hope that helps.
Bohs
Thank!
Is there any good navigation software for folio 100?
For gps we can use blutooth gps.
so far the only SW I know are Navigon, Sygic, Copilot and the one from Google.
You can try Copilot, iGO or Sygic Aura
I tried to install Sigic Aura but it told me it need "3D hardware acceleration not available in this phone". Is it possible to solve this problem???.
Thanks.
I try Igo My Way and the screen is to small.I install CoPilot but I can't run it. It say "CoPilot's code cannot be loaded by the system". With Aura I have problem with 3D...
Sent from my Folio 100 using Tapatalk
Thanks a lot.
Hello,
someone who tried this solution:
Haicom HI-505SD standard Bluetooth GPS receiver with standard miniSD to SD adaptor
Pros:
-standard Bluetooth connection
-power directly over the SD Card slot
to use navigation on the folio, u will need it to be constantly powered in the vehicle. there are many bluetooth gps receivers, and some of them are reported to work nicely with android 2.2 with the help of some 3rd party apps. but didi anyone find a way to power the folio in the car?
Officially there is no connector that you can use, but you can use a 3th party adaptor to get a 220/110 volt out of the cigarette lighter outlet.
You can also get a external backup battery.
I have a 12->15-21v laptop power supply to use in the car which was much better than trying to use a 240v charger in the car (it kept killing the little invertors I tried before).
Ok, i found a solution to using gps on the folio via bluetooth. There is an app called gpsredirect for winmo5 n up. Install bluetooth gps on android. U will need a pda running win mo 5 or above with integrated gps chipset. I han an old eten g500+ i was not using. I will make as my bluetooth gps receiver for the folio. Gps redirect works only on some devices, check the tested n supported list!
Just need to find a working navigation app for the folio now. Got a car charger for the eten g500+, just need to solve the charging for folio n the navigation app n we r good to go.
ok. i got co-pilot live on the folio and it works nicely. runninf on full screen. the graphics are not astonishing since its extrapolated and not made for 1024x600 screens but it looks fine to me.
I havent gotten time to try it with the apps i mentioned and the eten g500+, but will do so as soon as possible. now just needs to figure out a way to charge the folio in the car
at the end, it just for the sake of doing this and seeing a nav app running properly on the folio, but practically it is useless. the screen is too big to be legally placed on the dashboard of the car or the windshield for that matter.
secondly due to the screen size and brightness, it is not advised to drive at night with that kind of brightness flashing in the eyes.
i have a bleuthoot gps and working with navigon and ndrive on my folio.
it works perfect
Sygic
I think the best is Sygic GPS Navigation.
Very smooty and fast.
During the official Samsung announcement for the SGS3 on May 3, they talked about integrating MirrorLink support into the phone. This is actually why I purchased this phone. I recently purchased a MirrorLink compatible car stereo, the Sony XAV-601BT. After several frustrating hours, a Samsung rep told me that only the Korean version supports MirrorLink. He suggested downloading an app from the Play Store called "Sh.air" by a company called M&SERVICE. It's the only thing that he knows about that would make the SGS3 compatible with MirrorLink at this time.
The problem is that the entire thing is in Korean (I think...I can't read it). It doesn't do me any good to have a Korean interface on my car dashboard. However, this means that the MirrorLink standard is software based and (probably) only requires the MHL connection in a cell phone.
Does anyone know if there are any MirrorLink compatibility apps in development? I would really like to get this working in my car. Any help or information is appreciated.
I'm using MHL with a Pioneer AppRadio 2. It's an option for you if Samsung doesn't implement MirrorLink for you.
How do you like your AppRadio 2? I was actually looking at that radio some time ago because I've generally had good luck with Pioneer. I couldn't find a lot of reviews about using it with Android, but what I found made it look like it's not very Android friendly. I've also read that it has a delay in the user interface. Can you give me some feedback about that stuff?
I'm mostly just interested in syncing my phone for navigation, phone calls, and Pandora. How does it work for that stuff with Android? Have you used Inrix Traffic with it?
I like the Sony XAV601BT because it's a solid head unit with MirrorLink capabilities. The AppRadio seems to try to be a phone interface first and head unit second.
Well, some things about the AppRadio 2.
It's definitely a phone interface first, car audio system second. Without the phone plugged in and operating it's a basic AM/FM receiver.
Android support isn't as good as iPhone support. There's less apps available and generally speaking it seems like Pioneer added the Android support as an afterthought.
Every time you connect your phone, the phone will prompt you to accept the PIN number that the radio sends it. Every time. It's highly annoying, but someone on avic411 has a tasker script that apparently has the phone auto-accept the prompt. I haven't tried it yet as my phone isn't rooted (I'm swapping it later today for the Pebble Blue that a buddy got and he doesn't want it rooted).
Inrix doesn't work on Android over the AppRadio. They haven't added support yet and Pioneer has a lockout so that you can only use apps that have been approved.
Google Navigation is another app that doesn't work, although Google Maps does. If you want full voice navigation the only app that they have available is Waze at the moment. Waze isn't bad, but I dislike the cartoonish appearance of it.
AppRadio supports Pandora Radio. If you have it, it can natively control it through the deck. Pandora's not available in Canada, so I haven't tried it.
AppRadio also has an ipod interface on the main screen. You can't get rid of it either, which is highly annoying if you're like me and don't have an iphone/ipod.
There is a very small lag in response when you use the touch screen. I believe this is because it uses Bluetooth to communicate with the phone. It's there, but not really that annoying unless you're trying to scroll using CarMediaPlayer. That said, CarMediaPlayer is a half decent app for playing media on the AppRadio. I find it's a lot faster and doesn't lag like the stock Music app on the phone.
Edit: I implied above that you need Pioneer approved apps for it to work. You can use other apps, but they won't have the ability to control them through the deck.
For my use, it sounds like the Sony unit is the better way to go. Hopefully MirrorLink gets some support, either third party or otherwise.
Thanks for the honest feedback about the AppRadio 2.
spumington,
Samsung will release its MirrorLink app in the next weeks.
The solution is software only, but just an APK. You need to modify your system in order to make it work.
And it's not related to MHL, just USB.
olluz said:
spumington,
Samsung will release its MirrorLink app in the next weeks.
The solution is software only, but just an APK. You need to modify your system in order to make it work.
And it's not related to MHL, just USB.
Click to expand...
Click to collapse
Hi can i ask where you got this info from?
olluz said:
spumington,
Samsung will release its MirrorLink app in the next weeks.
The solution is software only, but just an APK. You need to modify your system in order to make it work.
And it's not related to MHL, just USB.
Click to expand...
Click to collapse
Where did you get this information? I also purchased the Galaxy S3 partly because it was the only Android phone announced to support Mirrorlink.
Can anyone confirm or deny if Android wear can connect to an external Bluetooth GPS receiver and get location from it? On Android it requires mock locations enabled, but I can't find anyone talking about this ability on Android Wear.
Few Android wear devices have GPS and it is a battery killer, so I would prefer to use an external Bluetooth GPS receiver if I were to get an Android Wear device.
I can find my old bluetooth gps and test it. I really doubt it supports external GPS units.
Any luck trying this out?
I tried. Doesn't work (yet?). The BT stack seems not set up to handle serial port profiles which is a requirement for external GPS decoders.
Thanks for trying this out. Much appreciated!
l_deadeye_l said:
Thanks for trying this out. Much appreciated!
Click to expand...
Click to collapse
Sorry I completely forgot about this. I couldn't make it work. I don't think watch google maps even designed to work with bluetooth GPS modules. Does it even support it on units that have GPS module installed? I think it takes everything from phone.
Posting here as I think I used the wrong secrtion previously
I recently installed a Xtrons PQS90MTVL head unit in a skoda superb. I have a couple of questions on how to get it to work correctly when navigating.
1) It seems that you can set the navigation sounds to be a percentage of the radio volume but cannot set it to play at a given volume regardless. The problem is that the radio seems to be constantly on and there is no way to turn it off. The 'on/off' button simply mutes the radio - and the navigation sounds.
Often I am in an area where I cannot pick up a decent radio signal on the programme I want and just get static. In these situations I want to turn the radio off but still hear navigation sounds. I don't want to listen to loud static just so I can have the nav sounds play at a percentage of that static. Is there a way to turn the radio off but still get navigation sounds? (a workaround I have found is to play a media file instead of the radio and then pause playback. The nav sounds are then still a percentage of the - non existent - playback volume. However this should not be necessary)
2) It also seems that a Internet connection is needed for any navigation. even google maps won't do a search without it as it says I am offline. (is this true?)
I have bought the 4G wifi dongle but have a question about its use. Does the HU connect to the dongle, as far as data is concerned, via the USB socket that comes out of the back of the unit or is that socket simply powering the dongle and the HUI is actually connecting to it over wifi using the dongle as a hotspot? If so then I don't have to use the wired usb socket from the unit (which I suspect is underpowered) and can plug the dongle into an ordinary 2A USB socket that I have in the car, positioning the dongle near the roof for a better signal
Incidentally I did try using Android Auto with my phone using wired connection. That seems sort of OK but is not very reliable. Often when starting the car it hangs at the 'connected' screen, or even at the 'trying to connect' screen, although other times it seems OK
3) There is a small socket on the left hand side of the HU that looks like a slot for a small memory card or a sim card. It is labelled 'GPS'. What is that socket used for? it is not mentioned in the manual as far as I can see. - The manual is generally a bit hand waving though, excitedly telling you what you can do but not how to do it.
(I did try the xtrons forum but not only are the last posts there around January 2022 but there seems to be no way to register for it. Hence posting here)
coldshiver said:
Posting here as I think I used the wrong secrtion previously
Click to expand...
Click to collapse
Ask a moderator to delete this other post.
ze7zez said:
Ask a moderator to delete this other post.
Click to expand...
Click to collapse
Will I get answers here then?
coldshiver said:
Posting here as I think I used the wrong secrtion previously
I recently installed a Xtrons PQS90MTVL head unit in a skoda superb. I have a couple of questions on how to get it to work correctly when navigating.
1) It seems that you can set the navigation sounds to be a percentage of the radio volume but cannot set it to play at a given volume regardless. The problem is that the radio seems to be constantly on and there is no way to turn it off. The 'on/off' button simply mutes the radio - and the navigation sounds.
Often I am in an area where I cannot pick up a decent radio signal on the programme I want and just get static. In these situations I want to turn the radio off but still hear navigation sounds. I don't want to listen to loud static just so I can have the nav sounds play at a percentage of that static. Is there a way to turn the radio off but still get navigation sounds? (a workaround I have found is to play a media file instead of the radio and then pause playback. The nav sounds are then still a percentage of the - non existent - playback volume. However this should not be necessary)
2) It also seems that a Internet connection is needed for any navigation. even google maps won't do a search without it as it says I am offline. (is this true?)
I have bought the 4G wifi dongle but have a question about its use. Does the HU connect to the dongle, as far as data is concerned, via the USB socket that comes out of the back of the unit or is that socket simply powering the dongle and the HUI is actually connecting to it over wifi using the dongle as a hotspot? If so then I don't have to use the wired usb socket from the unit (which I suspect is underpowered) and can plug the dongle into an ordinary 2A USB socket that I have in the car, positioning the dongle near the roof for a better signal
Incidentally I did try using Android Auto with my phone using wired connection. That seems sort of OK but is not very reliable. Often when starting the car it hangs at the 'connected' screen, or even at the 'trying to connect' screen, although other times it seems OK
3) There is a small socket on the left hand side of the HU that looks like a slot for a small memory card or a sim card. It is labelled 'GPS'. What is that socket used for? it is not mentioned in the manual as far as I can see. - The manual is generally a bit hand waving though, excitedly telling you what you can do but not how to do it.
(I did try the xtrons forum but not only are the last posts there around January 2022 but there seems to be no way to register for it. Hence posting here)
Click to expand...
Click to collapse
First of all you need to fix your FM reception. You need to use a phantom power adapter to get some voltage to the OEM antenna.
There are some navigation apps which don´t need a internet connection. TomTom as example and others using offline maps. But you won´t get traffic messages if you don´t have an internet connection.
That would fix your white noise.
The FM radio can be closed if you use the back button on top right. If that does not help, chose the recent apps button on top and swipe the radio app away as for each other app... You really should learn how to use Android.
The navigation loudness can be set in the system settings. Depends on the unit where you can find it. In this case the navigation software needs to be registered as navigation in settings /Apps/Standard apps.
Regarding your 4G-WiFi dongle... The name itself shows the functionality.
It connects via 4G to the internet and provides the connection via WiFi to anyone in the car.... even too to the radio.
The GPS slot on your radio is nothing else as a micro-SD slot, which also can be used to store music on it or whatever else you want.
BTW: Seems that you are not that familiar with car electronics. May be a good idea to ask someone who can help you with some knowledge what has to be done.
Might be an easy task to just swap a radio, but there are more things behind than just swapping.
May I recommend 'Magic Earth' navigation, works fine with no internet but no live data of course.
At least there are a lot more offline navigation apps...
Out of memory:
Google Maps (partially with downloaded segmented maps)
HERE WeGo
Navmii GPS World
OsmAnd
MAPS.ME
Magic Earth
TomTom
iGo
But without internet... no traffic data..
rigattoni said:
First of all you need to fix your FM reception. You need to use a phantom power adapter to get some voltage to the OEM antenna.
There are some navigation apps which don´t need a internet connection. TomTom as example and others using offline maps. But you won´t get traffic messages if you don´t have an internet connection.
That would fix your white noise.
The FM radio can be closed if you use the back button on top right. If that does not help, chose the recent apps button on top and swipe the radio app away as for each other app... You really should learn how to use Android.
The navigation loudness can be set in the system settings. Depends on the unit where you can find it. In this case the navigation software needs to be registered as navigation in settings /Apps/Standard apps.
Regarding your 4G-WiFi dongle... The name itself shows the functionality.
It connects via 4G to the internet and provides the connection via WiFi to anyone in the car.... even too to the radio.
The GPS slot on your radio is nothing else as a micro-SD slot, which also can be used to store music on it or whatever else you want.
BTW: Seems that you are not that familiar with car electronics. May be a good idea to ask someone who can help you with some knowledge what has to be done.
Might be an easy task to just swap a radio, but there are more things behind than just swapping.
Click to expand...
Click to collapse
Thanks for a helpful reply. I have already fitted a power injector for the FM antenna which made some difference but I like to listen to radio 4 and there are parts of the country (along the M11, on the A5 in North Wales), where you cannot pick it up on any radio - and of course in Europe where I have just been for a few weeks where I usually don't want the radio on at all. That's why having the nav sound set as a percentage of the existing volume seems a bit odd as it implies you already have some other sound on. Better to have a dedicated channel for it or have the nav mute any other sound.
I'll look at doing all the swiping etc to turn off the radio by closing recent apps although this doesn't seen like a very safe thing to start doing when you drive into a area of poor reception. I was hoping the unit would have a simple press button like in the good old days!
The dongle info is also useful thank you. Xtrons do not make this clear at all. They imply that by plugging it into the socket on the unit you have made a (wired) data connection. If the HU is still only connecting over wifi anyway then I can install the dongle wherever I like in the car so that it gets a good 4G signal, instead of it having to be in the driver footwell at the end of the short USB cable xtrons supply and I can use a dedicated 2A usb adaptor to supply decent power .
I guessed the 'GPS' socket might have nothing to do with GPS. Shame Xtrons couldn't say what it was for instead of just mis-labelling it.
Incidentally. The SIM in the dongle would only ever be used for the navigation to receive traffic updates or bits of map or whatever it needs i.e I don't intend to be surfing the net or downloading Utube videos. Do you have any idea what sort of data requirements this would mean. Would a 250Mb a month sim be enough?
I'll experiment with your suggestions.
rigattoni said:
At least there are a lot more offline navigation apps...
Out of memory:
Google Maps (partially with downloaded segmented maps)
HERE WeGo
Navmii GPS World
OsmAnd
MAPS.ME
Magic Earth
TomTom
iGo
But without internet... no traffic data..
Click to expand...
Click to collapse
I'll look into those thank you. I use maps.me on my phone but couldn't get google maps to work on the HU as it said I was offline. Of course I still need an internet connection to download any of those apps and install them on the HU but I could just park near my house and using the house wifi.
Data plan for using navigation online data depends on the app you use and the amount of mileage per month.
You can use your smartphone first to see what you need in a "normal usage" month and then decide what you need.
If you use any offline map solution, it´s also some sort of usage dependency.
BTW... If you would invest into a higher data plan (2GB), you could use the app Radionator to use Online radio. BBC Radio4 should be in there too. Radionator is the best alternative if you want to listen to one specific radio station. Just needs a stable internet connection, nothing else... and the sound is mostly better than FM.
May be you can use the Navradio+ as alternativ solution for receiving FM radio. Depends on the MCU of your unit. Search for it in MTCD software forum.
rigattoni said:
At least there are a lot more offline navigation apps...
Out of memory:
HERE WeGo
But without internet... no traffic data..
Click to expand...
Click to collapse
I would recommend to use HERE WeGo, it served me very well for the years I didn't have mobile internet connection. Also it shows the max allowed speed in most countries, whereas Google Maps doesn't do that.
Sure, Here WeGo is a good choice, even without internet connection.