I have a xt907 and after playing around with rooting, I goofed bigtime and now I can only boot to the fastboot menu.
Im trying to flash the default images back on,. but I keep getting errors. I've tried the firmware versions found at the sbf-droid page.
All the Versions except for the last one give me the same error on the system.img
Code:
sending 'system' (262144 KB)... OKAY [ 19.976s]
writing 'system'... INFOPreflash validation failed
FAILED (remote failure)
The last one Android 4.4.2 Blur_Version.183.46.10.XT907.Verizon.en.US - gives me the error
Code:
~/droid/VZW_XT907_4.4.2-KDA20.62-10.1_CFC_1FF.xml$ ./moto-fastboot flash system system.img
sending 'system' (262144 KB)... OKAY [ 19.986s]
writing 'system'... INFOProtocol error (multiflash unexpected)
Any help?
Have you tried with rsd lite?
Edit: and you said you rooted did you unlock the bootloader?
Hey guys, i wanted to unlock bootloader, and so i UNLOCKED BOOTLOADER, FLAHSED TWRP, TRIED TO FLASH CUSTOM ROM.
the twrp compared tz version and ended up in an error, so i searched online to know that, we need to update the system.
so i flashed recovery.img on top of twrp and rebooted where the fastboot got lost and ended up in a dead boot.
no vibrations, no led, no charging, no fast boot.
then i flashed using qfil using qualcom husb and got back the fastboot.
but this time, in fastboot, when i try to flash boot, system or recovery, it says, ::ARTITION TABLE DOES NOT EXIST.
so i tried to flash the gpt_both0.bin file as partition, and gave an error message of::: CANNOT FLASH THIS PARTITION IN LOCKED STATE.
i tried to fastboot boot twrp.img and ended up::: UNLOCK DEVICE TO USE THIS COMMAND.
so im pretty much got my bootloader locked and im unable to unlock it so i can flash stuffs.
the question is, how to flash the bootloader using fastboot so i can flash the rest and continue/??
Code:
C:\adb>fastboot devices
5072e4de fastboot
C:\adb>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (24869 KB)...
OKAY [ 0.784s]
writing 'boot'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.799s
C:\adb>fastboot flash partition gpt_both0.bin
target reported max download size of 268435456 bytes
sending 'partition' (33 KB)...
OKAY [ 0.016s]
writing 'partition'...
FAILED (remote: cannot flash this partition in locked state)
finished. total time: 0.016s
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (29968 KB)...
OKAY [ 0.944s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.952s
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.950s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.950s
https://www.androidfilehost.com/?fid=24671318762849134 you need to flash this fisrt before flash custom rom
Same Problem XDA devs Pl Help
Kabeesh said:
Hey guys, i wanted to unlock bootloader, and so i UNLOCKED BOOTLOADER, FLAHSED TWRP, TRIED TO FLASH CUSTOM ROM.
the twrp compared tz version and ended up in an error, so i searched online to know that, we need to update the system.
so i flashed recovery.img on top of twrp and rebooted where the fastboot got lost and ended up in a dead boot.
no vibrations, no led, no charging, no fast boot.
then i flashed using qfil using qualcom husb and got back the fastboot.
but this time, in fastboot, when i try to flash boot, system or recovery, it says, ::ARTITION TABLE DOES NOT EXIST.
so i tried to flash the gpt_both0.bin file as partition, and gave an error message of::: CANNOT FLASH THIS PARTITION IN LOCKED STATE.
i tried to fastboot boot twrp.img and ended up::: UNLOCK DEVICE TO USE THIS COMMAND.
so im pretty much got my bootloader locked and im unable to unlock it so i can flash stuffs.
the question is, how to flash the bootloader using fastboot so i can flash the rest and continue/??
Code:
C:\adb>fastboot devices
5072e4de fastboot
C:\adb>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (24869 KB)...
OKAY [ 0.784s]
writing 'boot'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.799s
C:\adb>fastboot flash partition gpt_both0.bin
target reported max download size of 268435456 bytes
sending 'partition' (33 KB)...
OKAY [ 0.016s]
writing 'partition'...
FAILED (remote: cannot flash this partition in locked state)
finished. total time: 0.016s
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (29968 KB)...
OKAY [ 0.944s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.952s
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.950s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.950s
Click to expand...
Click to collapse
:fingers-crossed:
Hi Guys! After brick, my p9l have red "menu" at start and text "Failed verificatnion" or smth like this.
I can't flash TWRP because of FAILED (remote: Command not allowed).
Bootloader & FRP unlocked.
Adb isn't working at bootloader, only fastboot is working.
I want to rollback to 6.0. I have dload with file on my sdcard but i can't flash oeminfo without twrp.
How to fix it?
Code:
E:\tele\SRKToolHuawei-STABLE-V1.3-20160619>FASTBOOT flash recovery EliteTWRP.img
target reported max download size of 471859200 bytes
sending 'recovery' (24452 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.632s
I want to say sorry for my english :/
Try to flash TWRP with P9 lite toolkit
Hi. Can someone assist me. I am not able to flash twrp in my Realme 2 Pro. It is stuck in Sending Recovery or it shows error as "FAILED (remote: 'unknown command')" ; "FAILED (Write to device failed (Invalid argument))"
Code:
PS C:\platform-tools> fastboot boot twrpr2p.img
Sending 'boot.img' (29304 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed
PS C:\platform-tools> fastboot flash recovery twrpr2p.img
Sending 'recovery' (29304 KB) FAILED (remote: 'unknown command')
fastboot: error: Command failed
PS C:\platform-tools> fastboot flash recovery twrpr2p.img
Sending 'recovery' (29304 KB)
Never mind. It was just issue with my Windows 10 laptop. Works fine when using Linux.
Can someone help me with getting the twrp recovery system on my moto. i keep getting the error
PS C:\Users\Avery\Desktop\platform-tools> ./fastboot boot C:\Users\Avery\Downloads\twrp-installer-3.5.2_10-0-river.zip
creating boot image...
creating boot image - 19036160 bytes
Sending 'boot.img' (18590 KB) OKAY [ 0.398s]
Booting FAILED (remote: '')
fastboot: error: Command failed
I am trying to root my phone but i need to get twrp working in order to do that.
Can someone help me?
oh and my bootloader is unlocked