Guy said he bought it off aliexpress and it didn't work and he got his money bak.
Generally things are not as dead as they seem so I took it. And immediately got oreELE to run from an SD card. So the hardware works.
If you plug the box in with no media it gets as far as the splash sreen and that's it.
I've rooted and put ustom roms on my phones so I grabbed a opy of twrp for this devie and it booted up just fine.
however when I try to wipe, install, et I get blok devie errors for ODM, vendor and produt and it an't find boot.
I don't think it ame from teh fatory like this, I think he went into android reovery and did something he doesnt want to tell me about.
Now oreele from an sd ard works just fine, but it occupies the sd slot and i have to hit the reset button anytime i want to reboot.
Ive heard good things about slimbo, would it be worth ferreting out hte problem or should i leave well enough alone sine it works right now with minor muking about?
Apparently my c key doesn't work, apologies.
*crickets*
Related
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.
Got a Nook Color, decided it wasn't for me even after hacking and custom romming it up and decided to restore to stock and sell. Here's a brief run down:
Followed a guide to flash stock image with custom recovery. When I was rooting I had a micro sd with CR and I had also installed a version to the NC's internal memory. From the guide I read it looked like flashing the stock image would restore it back to stock for everything. Did this and I got the standard boot screens and the setup screen with the girl and the video. Powered it off, cleaned it up, reboxed and put it up for sale. After I sold it I got a call back from the buyer saying it was hanging on the startup screen for nearly ten minutes. That later devevolved into boot loops. I would have originally held by "all sales final" mentality with craigslist buyers but then he mentioned it would flash a screen for a moment that would say "android" before boot looping again. Figured at this point I should be a guy and take it back, mainly because I HAD told him I did not root it. I got it back and it was boot looping, going through the "touch the future of reading" page and the N logo. Forced 8 failed starts and got an error message saying install could not complete. I fiddled some more (this is all while with friends at a Best buy mind you) and managed to get it to boot to screen, register my b&n account, and do a factory reset. After this it operated and ran perfectly fine, and after multiple factory resets, resetup runs, and trouble testing to force issues, it yielded perfect functionality. I even tested to make sure it would accept a credit card and that worked fine.
I'm gearing up to sell it to another buyer but I want to make sure I have my ducks in a row. I haven't fiddled with it beyond what I did the night I took it back but all testing I've done today has been fine. With B&N rolling out a froyo update though I want to be sure the unit is fine and won't give the other guy any trouble. There is no super user login or anything else that would suggest it's rooted or running anything other than stock firmware. I'm thinking that not letting it factory reset after flashing a stock rom may have contributed to my first bout of issues. Is there anything else I can check or look at to make sure the NC is good to go though?
EDIT:
Just performed a successful factory reset with deliberate 8 failed boots. Worked like a charm. Think I'm golden less otherwise advised.
Sent you a PM.
Hey guys, i received a Samsung Focus i917 rev 1.3 from a guy who wanted to put that phone back to factory state. Im dont have a lot of experience on windows phones other than the HTC versions. Anyway, i performed a factory reset on the phone but the data didnt deleted at all. Now, i understand as far as i know that those phones need the SD card in order to work fine. That phone didnt have one, but it was working though. Thing is i decided to flash it with stock ATTJK2 and when i flashed it everything went fine. But the phone now stays on the Samsung logo for some minutes and reboots. When i say this case is different is because i can get to download mode as many times as i want, i can perform factory reset using hardware buttons and everything. In fact, i even installed MAGLDR and a custom rom trying to solve this but even though everything went well phone is still stuck on that logo. So my question is, should i insert a working SD for that phone and then flash it? Is it worth the try? Or is this phone just a brick? Cus my guess unbricking it wont solve it since the phone can reach download mode.... Help please and thanks for your help as always
enelyam said:
Hey guys, i received a Samsung Focus i917 rev 1.3 from a guy who wanted to put that phone back to factory state. Im dont have a lot of experience on windows phones other than the HTC versions. Anyway, i performed a factory reset on the phone but the data didnt deleted at all. Now, i understand as far as i know that those phones need the SD card in order to work fine. That phone didnt have one, but it was working though. Thing is i decided to flash it with stock ATTJK2 and when i flashed it everything went fine. But the phone now stays on the Samsung logo for some minutes and reboots. When i say this case is different is because i can get to download mode as many times as i want, i can perform factory reset using hardware buttons and everything. In fact, i even installed MAGLDR and a custom rom trying to solve this but even though everything went well phone is still stuck on that logo. So my question is, should i insert a working SD for that phone and then flash it? Is it worth the try? Or is this phone just a brick? Cus my guess unbricking it wont solve it since the phone can reach download mode.... Help please and thanks for your help as always
Click to expand...
Click to collapse
You can definitely try inserting a SD card and see. I'd say it's definitely worth trying. It would be best to match the original SD card it had, if possible. But even so, remember it's not guaranteed it will work.
If you'd search the forum for "stuck in loop" or "stuck at samsung logo" you'd see it's not a rare problem, unfortunately.
I have same problem with two different phones, the one started with be stuck in the loop. No matter what I have tried it will not break the loop, everything flashes fine but never boots. Second one started out working, but factory default wouldn't completely clear data. Very odd...
Well, seems like these phones are not worth a penny then. Its incredible that something like that could happen to a smartphone, So many things that go wrong with them, Im going to put them in the no no list togheter with the Razr. Worst phones to deal with... And yes ive seen its very common to find this issue. Which is why i think theyre worthless
enelyam said:
Well, seems like these phones are not worth a penny then. Its incredible that something like that could happen to a smartphone, So many things that go wrong with them, Im going to put them in the no no list togheter with the Razr. Worst phones to deal with... And yes ive seen its very common to find this issue. Which is why i think theyre worthless
Click to expand...
Click to collapse
I'd say that is your experience and your perspective. Normally, you are NOT supposed to flash custom ROMs and you have been warned that if you do it you RISK bricking your phone. This is a new platform and the process of flashing is not yet 100% understood.
I've warned folks several times about flashing MAGLDR, it seems that only *some* phones have this "stuck" issue and in 99% cases they are related to flashing custom roms. To add more, no one has a fix (not even the guru's), which tells me the issue is most likely unfixable by software (much like an old bios reflash, might require taking out a chip). It might be a later batch of phones that use a specific chip, it might be something else. Point is you're flashing something on your own risk. And saying the phones aren't worth a penny just because you don't want to accept the risk of doing something potentially dangerous is a bit stretchy. And that's my perspective. To add on that, all phones should be looked for the capabilities and what they do, not just for modding. Focus has a replacement for the custom roms, you can achieve the same by installing packages yourself, without unnecessary risks.
Well, im sorry if something was misunderstood. I didnt mean to hurt feelings in here M8. But the thruth is that the phone was completely stock, i just wanted to delete the old data. So decided to flash it with official ATT firmware, it wasnt custom firmware. But since the phone didnt wanted to delete the data after factory reset(which for starters its odd) i tried flashing it and it flashed perfectly according to the flashing software. But it was stock Att, and the phone got stuck in samsung logo after the flash. Never made it further, i mean its not an unusual issue around here so thats why i said that. After that happened is when i tried to install MAGLDR, which installed perfectly also. But when i tried to flash a rom the phone just did the same, stuck in samsing logo also. In fact, i can still flash whatever i want on it, it goes to download mode perfectly, but no matter what i flash on it, it will stay on the samsung logo after that... Anyway, my bad on saying that those phones are not worth it. There maybe more people willing to have a phone which they wont know if it will boot when they turn it off, or maybe not delete their data when they wan to factory reset the phone. Im not one of those thats all. But i do respect your work dont get me wrong, its just that some odd situations like this makes people think twice when buying a phone.
Right mate, I get your point. No harm
If it makes any difference, happened to my wife's phone during normal Zune update, got the logo-loop. Was fixed by reflashing stock rom. Painful, but it worked. In your case it seems something was wrong with the flash, not being able to delete data after factory reset is indeed at least weird. Sorry you had a bad experience, I guess some of those happen every now and then...
Hey folks,
I did not find anything on this issue, seems to be rather unique. Let me describe the problem.
This is my father's Axon 7 and he wanted me to get him a different ROM on there, which I did, and it worked smoothly until today. It kept crashing, freezing and was literally unusable for unknown reasons.
So since he was going to be gone for the next few days, I had no choice but to remove the ROM and data and reflash it. HOWEVER I did not delete the internal storage since I did not think it would be necessary. Sitting in the setup, I had issues getting through it, it will not pop up the keyboard to let me type the wifi password neither does it let me pass through if I wanted to use mobile data. It simply gets stuck. Sometimes random android processes tend to crash and put me at the start of the setup and I can't get to the settings which does prevent me from enabling USB-debugging or OEM unlock.
If I try to get into the recovery (which is still on there) it will simply get stuck on the screen that says ZTE, did not work through fastboot either, same issue.
(I do personally think that some app data is corrupted and causes the issue, since I wiped everything except internal storage and I still have major issues)
So here am I, stuck. I hope someone can enlighten me, or tell me how stupid I am and point me at something completely obvious. Thanks
OmegaFighter said:
Hey folks,
I did not find anything on this issue, seems to be rather unique. Let me describe the problem.
This is my father's Axon 7 and he wanted me to get him a different ROM on there, which I did, and it worked smoothly until today. It kept crashing, freezing and was literally unusable for unknown reasons.
So since he was going to be gone for the next few days, I had no choice but to remove the ROM and data and reflash it. HOWEVER I did not delete the internal storage since I did not think it would be necessary. Sitting in the setup, I had issues getting through it, it will not pop up the keyboard to let me type the wifi password neither does it let me pass through if I wanted to use mobile data. It simply gets stuck. Sometimes random android processes tend to crash and put me at the start of the setup and I can't get to the settings which does prevent me from enabling USB-debugging or OEM unlock.
If I try to get into the recovery (which is still on there) it will simply get stuck on the screen that says ZTE, did not work through fastboot either, same issue.
(I do personally think that some app data is corrupted and causes the issue, since I wiped everything except internal storage and I still have major issues)
So here am I, stuck. I hope someone can enlighten me, or tell me how stupid I am and point me at something completely obvious. Thanks
Click to expand...
Click to collapse
well, you can use EDL maybe?
The fastest way out is downloading the A2017G_FULL_EDL file from our Russian friends and use MiFlash while in EDL mode to flash the cluster**ck of a phone that you have.
The closest thing I've seen was a friend's Galaxy Grand 2 (like 5 years old) that maybe had a part of the system corrupted or a slightly dead eMMC. a bunch of stuff just crashed for no apparent reason. I reflashed the system and it got fixed for some time, then it started doing some weird sh!t again (after booting, you have an 80% chance that it will just freeze forever, hard reboot needed). But let's hope for the best and see if you can recover it by reflashing stock totally. If it still doesn't work you might be able to relock the BL and claim the warranty
Choose an username... said:
well, you can use EDL maybe?
The fastest way out is downloading the A2017G_FULL_EDL file from our Russian friends and use MiFlash while in EDL mode to flash the cluster**ck of a phone that you have.
The closest thing I've seen was a friend's Galaxy Grand 2 (like 5 years old) that maybe had a part of the system corrupted or a slightly dead eMMC. a bunch of stuff just crashed for no apparent reason. I reflashed the system and it got fixed for some time, then it started doing some weird sh!t again (after booting, you have an 80% chance that it will just freeze forever, hard reboot needed). But let's hope for the best and see if you can recover it by reflashing stock totally. If it still doesn't work you might be able to relock the BL and claim the warranty
Click to expand...
Click to collapse
Hey,
After a long day I managed to fix it, I was able to use the adb in fastboot and could reinstall the recovery and managed to run it, deleted internal storage and reinstalled everything. Seems to have done the trick. I hope it will keep working now.
OmegaFighter said:
Hey,
After a long day I managed to fix it, I was able to use the adb in fastboot and could reinstall the recovery and managed to run it, deleted internal storage and reinstalled everything. Seems to have done the trick. I hope it will keep working now.
Click to expand...
Click to collapse
good
G'day all,
Hoping someone can help. (firstly I've searched on here over and over and some things have really helped, but can't find this issues on here)
Samsung Galaxy S4 GT-i9505 (originally with Vodafone rom)
Back story, I managed to put google rom via WINTEAM at some point in time (I don't recall how I did this now) this file - crdroid-6.0.0-20151208-jfltexx.zip (I still have this but not a md5 file)
Anyway, I wiped it under settings and basically stuffed it right up. Loops on WINTEAM (this part I had found in search and downloaded Odin3 v3.13) and Samsung Rom and a couple of others.
I9505XXUHOJ3_I9505VAUHOJ1_I9505XXUHOJ3_HOME.tar.md5
I9505XXUHQK1_I9505MAXHQK1_I9505XXUHQK1_HOME.tar.md5
I9505XXUHOL3_I9505TELHOL2_I9505XXUHOL3_HOME.tar.md5
CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5
The last one actually fixed up the google install but was hoping to place the original Samsung ROM back on and now it doesn't help at all when I run again.
The top 3 are Vodafone, Telstra and Max a forum had suggested (from a page on here somewhere). All of these say pass in Odin3 when installing onto phone. But once it gets to the Samsung with what looks like dots shooting out from the word it never gets past this at all.
When I power up the S4 phone, to get to download screen. I have volume up to download or volume down to restart phone. Some places I've read say to select wipe, I don' t have this option at all.
I saw an option to install s8 rom to s4 which I would like to do, but the how to do that requires working software first and install TWRN or something like that.
I'm not sure if this will run fast or ok on this phone, but it isn't a MD5 file either.
I would like Samsung ROM back on as it (for me cleaner than google or maybe just what I've been used to). I'd like to give to my youngest child as their first phone.
I also had tried to place zip files and also unzipped files on the SD card on the phone, nothing worked for me as it looks like it is expected ODIN3 to work.
At this stage of the day, I would just like to have it functioning again with anything that works.
Any advice on what to do now would be greatly appreciated, also I'm truly sorry if this problem has been documented, I really did try to do my research first before putting this up here. I've been on this for weeks now
So quick update. through more research, I have managed to install TWRP and now have access to additional utilities through WINTEAM. I've now tried to install ROM through the Micro SD card.
I think it comes up with a mount error, but has rebooted and still stuck so can confirm just yet.
I've managed to go through the entire process of installing the PurifieD+ROM+v3.5.zip through the micro SD card in the phone. Asked me about all the options etc during the install. There didn't appear to be any errors at all. Asked to reboot. etc....
I even had sound on the bootup, Now I have the Samsung word on the main screen with a blue backlight just flashing. Been like that for nearly 10 minutes. Not looking good.
Have I got bad memory or am I doing something wrong?
I managed to do a wipe after I did an install and it booted up find. I had no WiFi but than installed the vodafone install that should be the original and all works now.
The amount of time I had been working on this, I really didn't think I was going to get it going. I honestly thought I had some hardware error going on.
In the end it runs now, I can setup and had to my child
so I've managed to now use several different ROMs but now I can't root the phone (it should be able to, has been before)
When I run Motochopper I get this error
error: only position independent executables (PIE) are supported.
Seems to happen no matter what rom I've installed. I can't seem to find an older rom running android version 5.01 now
Any help on how to root this. Would be great
Now says it has been rooted, but I do not get the teamwin boot menu option at all. more like just a text style menu for wiping and loading other roms.