Note 3 SM-N9005 coming from firmware LRX21V.N9005XXSGBRI2 - Galaxy Note 3 Q&A, Help & Troubleshooting

What are the steps to flash?
In theory
unlock BL (is it needed at all, and if how for the SM-9005 Note III)
flash RM (TWRP etc., which version?)
flash CR (LOS and so on, what is a rock solid option?)
flash GAPPS
Or do I need to root first?
There is no OEM Unlock in the [Developer options]
Any links to follow? For a specific method suitable for Note3?
Best ROM for me would be, bug free overall operation, no lags
Any recommends for a flawless and well performing custom ROM (above FW LRX21V.N9005XXSGBRI2 is stock)

The steps are mostly correct. You may have to ensure Vaultkeeper is disabled after unlocking the bootloader. See this.
You do not have to root your device in order to install a custom ROM. All you should have to do is unlock your bootloader, ensure Vaultkeeper/KG is disabled, then install TWRP, which you can use to flash a custom ROM.

Starting with a shopping list:
Heimdall Recovery Flasher
TWRP for SM-N9500
from Team Win Website TWRP for HLTE
Bring the phone to Download mode:
Powering off and press the Power, Volume Down, and Home buttons simultaneously. When the blue screen appears, release all 3 buttons and press Volume Up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In Heimdall - Utilities - Detect
Nice try won't do - Heimdall wants a gzipped tar containing a firmware.xml - neither the xml is there
Heading over to ODIN website
In Odin, import the appropriate twrp.tar file for your variant with the "AP" and press the "Start" button
Succeed 1 ?
Won't install yet. After Reboot into Recovermode "Power, VolUp, Home" Standard Recovery shows up
There is no OEM unlock in Dev Options. The only thing visible is Allow USB Debugging
With USB plugging in, phone is asking PTP or MTP but not debugging. I would assume some additional step is missing.

OK, I'm one step beyond:
After starting Odin, filling the AP button with TWRP, this time I disabled under Options TAB "auto reboot" before starting to flash, then I saw the pass message
Disconnecting the USB and pressing power, volume up and home button until reboot
Releasing the power button instantly and kept holding volume up + home until it enters TWRP recovery
Well, that's the first step, now the wipes
Wipe and pull “Swipe to Factory Reset”
Advanced Wipe, System and pull “Swipe to Wipe”
Now I connect USB und use the filemanager to upload ROM and GAP to the internal storage.
Still not sure which to use.

Related

[Q] Soft bricked, cant adb to device.

Hey guys, I'm running CM 12.1 (lollipop) on my G900I and hit fix permissions in TWRP and softbricked my device. I can't seem to adb into it (says device offline) which means I cant put my rom back onto my SD card.
What can I do? Using a toolkit it says waiting for usb debugging to be enabled, but idk how to turn that on because my device wont boot.
sammobile dot com, grab a stock ROM, grab ODIN, follow instructions under the download
I couldn't find one for G900I so i got the one for G900F instead, ill try once its downloaded
Don't flash a ROM for the wrong model phone....unless you really want a brick
G900I is on sammobile, I've just checked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Snorflake said:
Hey guys, I'm running CM 12.1 (lollipop) on my G900I and hit fix permissions in TWRP and softbricked my device. I can't seem to adb into it (says device offline) which means I cant put my rom back onto my SD card.
What can I do? Using a toolkit it says waiting for usb debugging to be enabled, but idk how to turn that on because my device wont boot.
Click to expand...
Click to collapse
There are few options here.
1. If you can get into twrp grab a USB SD card adapter and load the rom on the SD card. Then flash it.
2. If you can get into twrp then plug your phone into your pc. Make sure you allow your PC to mount the storage on twrp.
3. The one with sammobile has been already mentioned
yeah i found G900I 20 seconds after i made the post.
My PC won't detect the phone in recovery mode (in like, my computer) nor do i have a USB -> SD CARD adapter
Of course not, only ODIN will be able to use the phone in download mode
You don't flash with ODIN in recovery mode
If you followed the instructions on sammobile, as posted...

Lost recovery but Rom OK?

I seemed to have lost my recovery but my phone is otherwise working.
I went from CM13 with TWRP, downloaded OS3 from the official oneplus web download as well as the "optional recovery" on the same page.
I wiped data/system/dalvik/cache and flashed the OS 3 zip.
I then flashed the stock recovery img.
Wiped again.
Rebooted to recovery from TWRP and got stuck with the oneplus logo. Completely non-responsive.
Fearing I had softbricked the phone, I started with ADB, got the Qualcom HUB listing under Device Manager and was about to start the process of updating Qualcom Drivers and running the recovery tool (having not been able to get fastboot to see the device) when a miracle happened and the phone started booting up on its own. After running setup, I rebooted, no problem.
I have since been able to use fastboot oem lock and confirmed the phone is locked (I wanted to get back to stock).
Everything is working fine EXCEPT I don't seem to have any Recovery at all. If I use the Developer Option for Advanced Recovery and boot into recovery, I get the oneplus logo. If I use Vol Down and Power I get the oneplus logo.
I think I have lost my recovery but recognise that I am out of my depth and don't want to stuff up the second chance I was given by trying to flash a recovery (I want stock receovery so I can get OTAs in the future). BTW, I read extensively before I tried this, looking at a number of different sites and followed instructions to the letter (or at least I thought so!).
Could someone who knows what to do please help to get my recovery back? It would be very much appreciated.
Edit: I managed to fix it. You have to use the Qualcomm tool and go back to OS2.2 and then update to OS3. See the link below and follow Method 1, doing everything exactly as set out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Error while Flashing Twrp 2.8.6 recovery.

I have flashed twrp recovery on my redmi note 4g. But after flashing when I rebooted to recovery mode, The teamwin logo appeared 4 times divided on my screen. I am unable to read any option.
Please give me a solution for this. I am attaching an image of my problem. Please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
aks279 said:
I have flashed twrp recovery on my redmi note 4g. But after flashing when I rebooted to recovery mode, The teamwin logo appeared 4 times divided on my screen. I am unable to read any option.
Please give me a solution for this. I am attaching an image of my problem. Please help me.
Click to expand...
Click to collapse
Flash this.
ray.77141 said:
Flash
Unable to flash from from my mi recovery. Verification error. I think i need a signed version of this or any other method of flashing?
Click to expand...
Click to collapse
aks279 said:
ray.77141 said:
Flash
Unable to flash from from my mi recovery. Verification error. I think i need a signed version of this or any other method of flashing?
Click to expand...
Click to collapse
Flash Recovery Using Adb Tools
You need 3 things
(a) Xiaomi usb drivers [download from Here ]
(b) adb drivers (download from Here ]
(c) TWRP recovery (TWRP download from Here ]
Procedure:-
1. install xiaomi usb drivers
2. extract adb drivers anywhere in your computer
3. copy recovery.img into adb tools folder
4. boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
5. connect your device to your computer through data cable
6. go into adb tools folder => while pressing shift key => right click => and click open cmd here !
7. type "fastboot flash recovery recovery.img" and press enter
8. Done
Click to expand...
Click to collapse

How to unbrick SATV Pro 2015? - Need Help

Hi all,
On Recently 7.2.1 updates, my device is failed to optimize (left it for the whole day alone)
So, i enter the recovery mode, performing the factory data reset. and when it done, reboot the device.
in this normal state, the OS is failed to enter, keep stuck at Nvidia logo forever.
Then, i enter the boot recovery kernel to
1) Wipe cache / partition
2) Wipe data / factory reset
and put the device into reboot when it done, but this appeared to be same (stuck at Nvidia logo and turn blank after a few hours)
This also put me into trouble because i cant apply the update via USB storage and ADB.
the error message is -- couldn't mount / usbdrive : Invalid argument (USB storage)
ADB device fastboot boot can't detect the device via PC
I provide the snapshot for your reference. Appreciate for your help and provide me a best solutions. Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Garageflower said:
Hi all,
On Recently 7.2.1 updates, my device is failed to optimize (left it for the whole day alone)
So, i enter the recovery mode, performing the factory data reset. and when it done, reboot the device.
in this normal state, the OS is failed to enter, keep stuck at Nvidia logo forever.
Then, i enter the boot recovery kernel to
1) Wipe cache / partition
2) Wipe data / factory reset
and put the device into reboot when it done, but this appeared to be same (stuck at Nvidia logo and turn blank after a few hours)
This also put me into trouble because i cant apply the update via USB storage and ADB.
the error message is -- couldn't mount / usbdrive : Invalid argument (USB storage)
ADB device fastboot boot can't detect the device via PC
I provide the snapshot for your reference. Appreciate for your help and provide me a best solutions. Thank you
Click to expand...
Click to collapse
Fastboot and flash 7.1 developers image per Nvidia's instructions. I had the same problem and that worked for me of course this is considering your bootloader is unlocked

help me

i made a mess, i can't install anything, i tried here to do repair installation for sansung a20s software, but it immediately failed, also it doesn't let me exit this screen anymore
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks i solved by flashing the original stock firmware again
To root your device, start by flashing TWRP, which you can find here. The TWRP .tar file goes in the AP slot of Odin.
Once you have TWRP installed, you should be able to flash Magisk, which you can find here.
how installa TWRP, i have error
this trying to put... twrp-3.7.0_9-0-a20.img
I didn't notice that OEM LOCK is ON.
You must unlock your bootloader to flash custom images.
ok i haveTWPR done
but after reload sisytem ...
this is very strange, for an old phone, I don't understand, I've never had all these problems ...
i m crazy
Did you flash vbmeta as well as TWRP? This might be the right file
I have to try again ,,,, but I still haven't figured out if anyone has been successful in rooting this device ,, I sansumg told everyone to do it
then, then yesterday I reflexed the original stok, now so I first do a TWPR and THEN this file that you are providing me?
yesss done good
now I need more help, I put TPWR then The file repairs vbmeta ,, ...., but it tells me that I don't have root permissions yet
do i have to give up?
Did you get a working twrp? Try booting into recovery (twrp) and then flash Magisk-v25.2.apk. If that works, reboot into system and install Magisk-v25.2.apk as an app. Then start the app and it will tell you whether you have root. If it doesn’t work, I don’t know what to do next. You may need to have the Magisk apk on a usb drive or microSD card for it to be visible in twrp.
the problem is that I put the TWPR gives me an error
vbmeta ,, then I put your tar file (
vbmeta_disabled.tar
2 KB · Views: 1) the phone starts, but in recovery I don't see TWPR the android menu looks normal
from this menu I tried to install the magic, but the installation fails
When you install twrp from Odin, disable automatic reboot from Odin options. Once you see that the flashing is completed, reboot the phone by holding vol- and power for 7 seconds, then immediately hold vol+ and power to boot into recovery. Otherwise twrp will get overwritten with stock recovery and you have to try again.
I am thinking that by reviewing the file (vbmeta_disabled) it overwrites the TWPR that I first put ,, in the revvr mod it always starts me with the classic menu
[email protected]
but every time I install a TWPR I have to insert after the file (vbmeta_disabled) because otherwise the phone always restarts with vbmeta error in download mod
Use 7-zip and add vbmeta.img from the tar above to the twrp tar and flash that
no work,,stay that way

Categories

Resources