Just bought a Bosion PX6 for my 2007 Ford Mondeo. Seems ok but a bit buggy. Freezes, illuminates sometimes and not others, sometimes stays on after ignition turned off. All intermittently.
Does anyone know where I can get an Android update for it (currently Android 10)?
What is the easiest way to root this unit?
Many thanks.
1960darrenh said:
Just bought a Bosion PX6 for my 2007 Ford Mondeo. Seems ok but a bit buggy. Freezes, illuminates sometimes and not others, sometimes stays on after ignition turned off. All intermittently.
Does anyone know where I can get an Android update for it (currently Android 10)?
What is the easiest way to root this unit?
Many thanks.
Click to expand...
Click to collapse
AIDA is nothing you should use on these units, because it says... nothing...
Take a screenshot of "About tablet" where a guy can see the MCU version and the firmware version.
Beside that: Install "Fake Device Test" from Android store and show the results.
Related
Ok so I have checked the "Google" world and come up with nothing. Here is my issue:
I use the ouku android 4.2.2 7 inch unit and have been for months in my car to monitor the engine. However about a day ago the sound began to get low and crackly regardless of AUX, Bluetooth, fm etc.
I pulled the unit to bench test it and make sure it wasn't a wire issues and it's not, I'm guessing I messed up some settings within the radio features? It is rooted also.
I have updated the firmware and mcu files as well as rooted this thing.
Any ideas?
Any ideas?
Any idea where I can get the 2015 models mcu files etc or any information on this?
continued here
http://forum.xda-developers.com/android-auto/android-head-units/ouku-model-2015-firmware-t3120009
Guys I hope you can help.
I purchased an android unit (I wish I could post the link of the unit but the forum will not let me) almost a year ago, it was working just fine, until a few months back when I noticed that sometimes the WiFi was not ON when I started my car, this only happened a couple of times so I didn't give it much attention until it started happening a lot like 50% of the times.
Now yesterday and part of today WiFi was OFF every time I started my car, this now a problem, I need WiFi for Waze and spotify.
I've noticed that if I turn off my car wait a few seconds and start it again the wifi might come back but it does not work 100% of the times
Any help would be appreciated
you can find the model on amazon if you search for 9" Quad-core 1024600 HD screen Android 5.1 Car DVD GPS Navigation for Kia Sportage 2017
I recently acquired a Sinosmart branded head unit for my car, it's one of the px3 quad core units. It has an odd issue where every 10 seconds it produces a "key tone" (beep) as if you had pressed one of the front panel buttons or used the touchscreen. I've tried a ton of different things including changing the key tone settings (low med high off), killing/disabling/uninstalling all of the apps one by one to see if any of them were causing the issue, I've repeatedly clean flashed (factory reset/wiped all data and cache) from Hal9k ROM 2.3 Nougat 7.1.2, Hal9k 5.11 rom. I've upgraded the mcu firmware for my unit. I've messed with every setting/option I can think of, the only thing that stops the tone is to mute the radio. I've found several others that have had a similar issue unresolved. At this point I'm having a hard time deciding weather it's hardware or software related, the fact that it persists after a clean flash points to maybe a hardware issue. If anybody could chime in and perhaps point me in the right direction it would be super appreciated! Thanks!
Apologies if this is the wrong forum - newbie.
I have an Xtrons PX30 based unit and the reversing camera has become intermittent - works about 1 time 10. After spending days checking the wiring and even buying a new camera I noticed that the behaviour is consistent and therefore likely to be a software issue. The symptoms are: with the camera not working - switch the head unit off and the camera now works. Switch the unit back on again and the camera still works and will remain working for quite a while but will eventually stop working again.
I've tried factory reset and updated the MCU and the system to the latest versions I can find here:
Yandex
Finds everything
disk.yandex.com
But makes no difference (The interface is nicer though). It's liveable with but irritating.
Your browser is not able to display this video.
Hi all , I have a Chinese headunit fitted in my vehicle, which is Android auto compatible, but not sure how to access the app, been told to download Headunit Reloeder, which I did it seemed to working fine for a few days, but now everytime I switched the unit on its constantly flickering like mad , can't do anything with it , I tried a few different procedures trying to rectify the issue but no joy, can anyone please help me out, thanks