Related
Hi,
is anybody using Viper4Android on this phone? Can it even work?
Viper4Android is not device-dependent so it should work just fine.
You'd need to follow the same steps as on any other device
Amplificator said:
Viper4Android is not device-dependent so it should work just fine.
You'd need to follow the same steps as on any other device
Click to expand...
Click to collapse
Yes, but on some phones it just does not work properly, and SELinux must be permissive. So if anybody is actually using it...
Viper works with any issues. Installing you have to remember to:
-root your yota
- set selinux to premissve
-install busybox
- to get it working ( viper4 driver status - processing -yes) set viper as default music equalizer in your player for e.g
in poweramp audio settings you have to disable Direct Volume Control and enable Music FX!
In general I recommend installing A.R.I.S.E. Sound Systems - Auditory Research in Sound Enhancement - Deuteronomy 1.86 which is in my opinion better than standalone viper4android. Before doing it you have to remember to do twrp backup , just in case . In my case everything works with any issues.
Managed to install A.R.I.S.E following your instructions. Sound before was a bit 'meh' but after tweaking the parameters my yotophone 2 sounds awesome! Well worth installing.
bobblesop said:
Managed to install A.R.I.S.E following your instructions. Sound before was a bit 'meh' but after tweaking the parameters my yotophone 2 sounds awesome! Well worth installing.
Click to expand...
Click to collapse
Viper4Android is the best thing ever somebody made in this universe Too bad author didn't / can't put it on Play
I've been using it since the beginning, audio books sound awesome, music is like injecting sound directly in your brain even with some 5$ headphones.
I've tested ARISE on my HTC M7, but it's a bit too much. I prefer clean V4A.
bobblesop said:
Managed to install A.R.I.S.E following your instructions. Sound before was a bit 'meh' but after tweaking the parameters my yotophone 2 sounds awesome! Well worth installing.
Click to expand...
Click to collapse
Which version did you install? TWRP reboots if I try to install ARISE, normal Viper can't install driver
I have SuperSU, Busy box and SelinuxModeChanger.
kbal said:
Which version did you install? TWRP reboots if I try to install ARISE, normal Viper can't install driver
I have SuperSU, Busy box and SelinuxModeChanger.
Click to expand...
Click to collapse
Deuteronomy 1.86
I wiped dalvic and cache before I installed and didn't need to change selinux
I managed to install ARISE 2.05.
Mounted System in TWRP, during install TWRP freezes, then reboots, but Viper works.
Hey guys, today I rooted my phone and installed newest Viper's audio for android. Everything is OK, apart the driver installation. App asks me to install drivers and when I let it do that (with root permissions enabled) it tells me to reboot phone to complete the installation. When I reboot, driver status is "abnormal" and the app asks me to install drivers again. There is no end. Please, couldn't you guys try to install Viper if it is functioning? Or if I made mistake somwhere and I have to flash fresh ROM? I tried almost everything.
Thank you.
arharos said:
Hey guys, today I rooted my phone and installed newest Viper's audio for android. Everything is OK, apart the driver installation. App asks me to install drivers and when I let it do that (with root permissions enabled) it tells me to reboot phone to complete the installation. When I reboot, driver status is "abnormal" and the app asks me to install drivers again. There is no end. Please, couldn't you guys try to install Viper if it is functioning? Or if I made mistake somwhere and I have to flash fresh ROM? I tried almost everything.
Thank you.
Click to expand...
Click to collapse
If you are using Magisk. Open Magisk Manager. Install Viper4Android module from downloads, then go to root file manager. Open Root/system/vendor/etc folder. Change audio_effects.conf to audio_effects.conf.bak Restart your device and then check the status then it should work. If you are on SuperSU then just don't forget to rename audio effects file after driver installation.
Klawzy said:
If you are using Magisk. Open Magisk Manager. Install Viper4Android module from downloads, then go to root file manager. Open Root/system/vendor/etc folder. Change audio_effects.conf to audio_effects.conf.bak Restart your device and then check the status then it should work. If you are on SuperSU then just don't forget to rename audio effects file after driver installation.
Click to expand...
Click to collapse
I will second this method. Installing via Magisk is probably the only way I've found on Nougat to install Viper without trouble. I install through Magisk and then install the newest Viper4Android app from that thread. Drivers preinstalled.
Kindly Read forum rulea before creating a thread bro.
You have Created it in wrong section.
Ask in question and answers section . ?
Could someone link to viper they are using please
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
I have 2.4.0.1 by guitarhero that works, flashed via TWRP. I have to use an SELinux toggling app (only available via APK mirror or similar sites) to set SELinux to Permissive for it to work. The OS will flag the app as dangerous, but it's fine.
Oh sorry for wrong section. Thank you guys. I tried the magisk version but didn't work. Then I tried to flash Viper by guitarhero and this works, because the driver is flashed into system along with app. I even had a newer version installed (2.3.4.0) and when I started this newer version first rather than older guitarhero, it worked. So I suppose you just need to flash viper for driver and then you can run new versions.
Hi guys, why don't you install ViPER4Arise™ 2.5.0.5 module (ARISE™ themed version of ViPER4Android's latest DSP application with pre-installed driver. All ARISE™ artwork is the work and property of @churapa) ?
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
chrissss91 said:
Hi guys, why don't you install ViPER4Arise™ 2.5.0.5 module (ARISE™ themed version of ViPER4Android's latest DSP application with pre-installed driver. All ARISE™ artwork is the work and property of @churapa) ?
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
carlese said:
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
Click to expand...
Click to collapse
If you read the linked first post is says:
Magnum Opus™ Features:
- The most advanced and comprehensive sound system ever made available.
- Jellybean through Android O developer preview support.
- ARM, Mediatek™, Qualcomm™, 32bit, 64bit, and x86 support.
- Full SELinux Enforcing support
- Magisk™ support provided by the incredibly talented Zackptg5 and his Magisk™ Resource.
- 300MB of fully customizable sonic bliss.
So at least there is a claim of enforcement support.
3DSammy said:
If you read the linked first post is says:
Magnum Opus™ Features:
- The most advanced and comprehensive sound system ever made available.
- Jellybean through Android O developer preview support.
- ARM, Mediatek™, Qualcomm™, 32bit, 64bit, and x86 support.
- Full SELinux Enforcing support
- Magisk™ support provided by the incredibly talented Zackptg5 and his Magisk™ Resource.
- 300MB of fully customizable sonic bliss.
So at least there is a claim of enforcement support.
Click to expand...
Click to collapse
I know but that's a generic statement, as far as I know it takes time to make it work on new devices.. Can anyone confirm?
carlese said:
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
Click to expand...
Click to collapse
Hi,
I've installed :
- Core System module (required once during initial installation)
- ViPER4Arise™ 2.5.0.5 module (optional)
- ViPER4Arise™ Profiles module (optional)
No need to modify anything else.
Just carrefully read installation process (search "arise_customize.prop").
Viper4ARISE + Magisk mod works for me too. SafetyNet passes.
I did have to set "delete.deep_buffer=true" to get it to work with Google Play Music.
chrissss91 said:
Hi,
I've installed :
- Core System module (required once during initial installation)
- ViPER4Arise™ 2.5.0.5 module (optional)
- ViPER4Arise™ Profiles module (optional)
No need to modify anything else.
Just carrefully read installation process (search "arise_customize.prop").
Click to expand...
Click to collapse
After fiddling witht he file I managed to install it on my op5.. But status is "abnormal".. I tried uninstalling the driver and only then V4A asked for root permission, then rebooted and still there is no option to reinstall driver.. What can I do?
carlese said:
After fiddling witht he file I managed to install it on my op5.. But status is "abnormal".. I tried uninstalling the driver and only then V4A asked for root permission, then rebooted and still there is no option to reinstall driver.. What can I do?
Click to expand...
Click to collapse
No problem for me, are you sure you have installed the core version (install.core=true) ?
chrissss91 said:
No problem for me, are you sure you have installed the core version (install.core=true) ?
Click to expand...
Click to collapse
Sure, are using supersu or magisk? Did you install V4A module?
carlese said:
Sure, are using supersu or magisk? Did you install V4A module?
Click to expand...
Click to collapse
i've installed :
- core
- v4a_2.5.0.5
- v4a_profiles
An d I use Magisk 13.0 beta
chrissss91 said:
i've installed :
- core
- v4a_2.5.0.5
- v4a_profiles
An d I use Magisk 13.0 beta
Click to expand...
Click to collapse
Ok but on magisk, did you install the V4A module?
carlese said:
Ok but on magisk, did you install the V4A module?
Click to expand...
Click to collapse
No, only busybox
chrissss91 said:
No, only busybox
Click to expand...
Click to collapse
Which one? SOrry to bother you, I'm not a newbie but there are a lot of busybox out there, just want to check if everything works and follow what you did..
Can't handle the sound on this phone. How do we get viper to work?
jkieffer46 said:
Can't handle the sound on this phone. How do we get viper to work?
Click to expand...
Click to collapse
Download ExperienceOS Add-on Aroma 5.0 and flash Divine Beats Audio mod here: https://forum.xda-developers.com/oneplus-5/development/rom-experienceos-r1-0-lite-addon-t3626657
Simpliest way :
- Download and install Busybox on your phone.
- Set SELINUX to permissive mode.
- Download and flash this Viper4android Zip : www.androidfilehost.com/?fid=745425885120697254
Normally all should be working. (Maybe open Viper4android app and install the driver first)
Also don't forget tout uninstall or disable any other audiofx you have.
(I know it's still the 2.4.0.1 version but it's still my fav)
Uninstall any viper APK and flash this on twrp...
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
HDash said:
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
Click to expand...
Click to collapse
Just flash on twrp...working great ...
After flashing you get the viper icon on your drawer...
Just open it and enable ..
Viper for OnePlus 5
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Works like a charm! ?
Thank you so much.
Cheers
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
polzovotel said:
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
Click to expand...
Click to collapse
I have no idea about the SELinux modes but I just flashed the Deutronomy zip without changing anything else and now it works perfectly
What ROM are you using ? OxygenOS 4.5.8 ?
---------- Post added at 03:10 PM ---------- Previous post was at 02:38 PM ----------
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
I am running OxygenOS 4.5.8. Root and BusyBox is installed. I flashed this zip but still get:
Enabled: No
Status: Abnormal
The same second I change SULinux to permissive - all start working fine....
Another Method
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
i download from magisk download after flash i reboot but still logo oneplus!!!
guide me!
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
excuse me, do i need to be rooted? or at least unlock the bootloader?
I will be creating a thread for simplest and proper viper4android installation on OxygenOS in my free time soon.
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Watch out in the Guides, New & Discussions section for my guide, thread to be posted soon.
ivongolia said:
excuse me, do i need to be rooted? or at least unlock the bootloader?
Click to expand...
Click to collapse
You need to unlock the bootloader and install custom recovery to install this ..
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
Tried the version in Magisk repo, but nothing happend after reboot. I can see the module in magisk but no Viper4Android-app. So I did a delete in Magisk Manager. Also, the thread is closed now.
Going to try install V4A via TWRP and his new module.
https://forum.xda-developers.com/apps/magisk/alienoidos-t3660485
Update:
Didn't work for me. No V4A-app, so I installed it manually and it tolds me to install drivers, did that reboot and it still said install drivers.
I'm on latest OOS with Magisk 13.3
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
chrissss91 said:
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
Click to expand...
Click to collapse
You're not alone.
ViPER4Arise is merely a themed version of ViPER4Android and ViperFX designed for the ARISE Sound Systems™ project.
ViperFX is merely the current 2.5.0.5 version of what is known previously as ViPER4Android, although it hasn't quite caught on obviously. This slight name change was a part of much bigger and impactful changes such as the official website address/domain, for example. :good:
acrylamid said:
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
Click to expand...
Click to collapse
Lol yeah, that is certainly not the intended outcome. At least we now know it is something on your end, most likely Magisk-related, although an existing v4a data or system installation can produce those same results.
I recommend a factory-reset in TWRP followed by an OOS-4.5.8 flash whenever it feels like a good time to do so, or at least uninstall and reinstall Magisk if nothing else.
We'll get you going, don't you worry. :good:
Comprehensive audio guide for android 8.1 and P DP1 (saves battery)
Cyan means 8.1 ONLYFor android P only, flash the magisk modules in TWRP, manager is broken with module flashing, just a temp patch from @topjohnwu
I am not responsible if you break, blow up, or destroy your device in any way
Hi XDA, this is the comprehensive guide to making the google pixel and XL have the ultimate audio mods installed while saving battery (if xposed is what you're looking for, it's under amplify)
Prerequisites
TWRP 3.2.1-x
Magisk v15.x REQUIRED
busybox (osm0sis) installed (for some mods)
Link to homeboy76's guide, look at step 9 or 10
Magisk permissive module Download
Dual stereo speakers Magisk module by kingbri(me) (AML bug fixed)
I ported Chdloc's mod into a magisk module, need to add it to the official repo, but it works very well right now
Download the zip file from this thread https://forum.xda-developers.com/pixel-xl/development/magisk-module-pixel-stereo-speakers-t3753190
Make sure you have permissive installed (check prereqs)
Flash it in Magisk
Reboot
Profit
Atmos
Download dolby unity port by @Zackptg5
Install (Universal)
Flash the permissive script in magisk
Flash the dolby zip in Magisk, It's a module
Reboot
App should be installed
IF installing with V4A, install Atmos, reboot, then V4A, then audio modification library, reboot. Everything should work
V4A steps
Install Ahiron and zackptg 5's v4a module (follow the prompts during installation)
You're done!
Ainur Sauron mod- fixes audio quality by importing qualcomm drivers as opposed to the stock android ones
Open magisk manager and navigate to downloads
search for ainur and download mark II.II
AML(audio mod lib) is installed (updated if you have v4a) by default
Reboot
If mod does not install properly, reflash the installation zip and should uninstall the mod
Battery saving
Greenify
Install the magisk module for greenify
open greenify and select NOT rooted
follow the prompts
go into settings after wizard
change mode to rooted
grant SU access
L speed (very important, this is the best battery saver app)
Install the beta from play store
Open the app and choose the AMOLED theme
choose the battery profile
turn on fstrim every boot
turn on aggressive doze (not recommended while driving, use greenify aggressive doze instead if you drive a lot)
After booting, launch L-speed and allow it to execute scripts
Hibernate Google Play services
Go into magisk manager and find the downloads section
Download sysconfig patcher, patches Google play store and other battery draining system processes so they don't drain battery
ElementalX kernel
Configure as elementalx governor with wq_powersaving enabled in the cpu menu
Amplify!
Installing Xposed framework and amplify
download xposed framework systemless here(make sure it is beta 2)
download xposed installer here
Install the xposed zip directly in magisk like a magisk module
Install xposedinstaller apk
reboot(takes a long time to boot firstrun)
open xposed installer
check to see if xposed is installed
install amplify from the PLAY STORE (not sure why it isn't installing in xposed)
activate xposed module and reboot
relaunch amplify and let it run on the default settings!
amplify configurations (updating specifics, requests avaliable in comments)...
Feel free to comment with updates to this guide, I will consider them and put them into the op!
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
TotoBerto02 said:
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
Click to expand...
Click to collapse
you download the zip file, and you copy and paste the commands while your phone is connected to the computer, "file name" is the file path where the zip is stored on your computer
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
kingbri said:
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
Click to expand...
Click to collapse
What does the rewrite of chdloc stero speakers do?
does the new version of arise work with 8.1?
willyumlu said:
does the new version of arise work with 8.1?
Click to expand...
Click to collapse
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Fwiw, I used this with Magisk 15.2 in a clean install of 8.1. Working without issue
https://forum.xda-developers.com/showthread.php?t=3577058
Sent from my Pixel XL using Tapatalk
liam_davenport said:
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Click to expand...
Click to collapse
ARISE itself works with 8.1, some of the modules are incompatible though, waiting (hunting) for a fix
Homeboy76 said:
What does the rewrite of chdloc stero speakers do?
Click to expand...
Click to collapse
It just means that I edited the guide to include a few commands I missed
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
MeetFace said:
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
It uses the speaker and the earpiece for audio, similar to the iphones
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
kingbri said:
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
Click to expand...
Click to collapse
Link please!
fixed
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
buzzywuzzy said:
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
Click to expand...
Click to collapse
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
kingbri said:
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
Click to expand...
Click to collapse
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
buzzywuzzy said:
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
Click to expand...
Click to collapse
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
kingbri said:
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
Click to expand...
Click to collapse
It didn't "crash" per se, it just wouldn't install the necessary driver after the package was installed. I'll try it with the module disabled and see if it works. Do I still need the permissive module for the other mods? Or just when they're being installed?
Dear Sir,opendata, rcstar6696, akshay2shah, iXaidyiu....
i 've install RR-6.0 rev-2 Official.zip rom on my Xperia Z2 D6503.
everythings is fine but ,any Audio fx (Like System audio fx,Dolby Atmos,Viper4Android and any other)Not opening.flash the dolby atmos(Oreo & Normal)but Device not boot up.Please Fix The problame.I mostly like the rom.please,please,please fix it....
srifal said:
Dear Sir,opendata, rcstar6696, akshay2shah, iXaidyiu....
i 've install RR-6.0 rev-2 Official.zip rom on my Xperia Z2 D6503.
everythings is fine but ,any Audio fx (Like System audio fx,Dolby Atmos,Viper4Android and any other)Not opening.flash the dolby atmos(Oreo & Normal)but Device not boot up.Please Fix The problame.I mostly like the rom.please,please,please fix it....
Click to expand...
Click to collapse
Viper 4 Android works fine when you use Magisk v16 and install it from the Magisk app Module section.
Choose Shadysquirrel's module.
Make sure you do a fresh install of The RR rom since you might have just too much installed and thing's got borked up.
And to be sure you also might Freeze the audio fx app (didn't had to do it tough)
Hope that helps
Skolotaie,,I will try Sir,But not working v4a.again and again wanting V4a driver installing on every boot up.My Phone is unning without any audio fx on this rom.
srifal said:
Skolotaie,,I will try Sir,But not working v4a.again and again wanting V4a driver installing on every boot up.My Phone is unning without any audio fx on this rom.
Click to expand...
Click to collapse
remove V4a
Install busybox first ..reboot
Install V4a..reboot .done
Skolotaie Sir...Thanks,Finally ur tricks work on my device.Thank u so match.