Hi guys, my nephew has his gave his phone to me, i can have it for my kids.
I tried to put it back to factory setting by recovery mode and it says failed to find misc partition.
my guess is flash it from download mode with odin into a new rom ?
Also what rom should i take because i cant really get it clear what kind of phone it is, from the netherlands.
Yes maybe some dumb questions but better safe than sorry
Thats a Galaxy A5 2016, model number is A510F as shown in your pic.
You should be good by flashing the latest stock ROM through Odin.
thanks, ive did that yes with the stock rom, only prob now is that it has FRP protection on..
Related
Hi all, i flashed the galaxy s4 KitKat ROM from jamal (THIS IS THE ROM http://forum.xda-developers.com/show...hp?t=2544474);
and now i want to return to the stock rom of the galaxy S4 but i dont know how to do.I tried to flash a stock rom with Odin but it didnt work and the Galaxy s4 at the start says "firmware upgrade encountered an issue. please select recovery mode in kies and try again".So i flash a stock recovery and now it works fine but i want to go back to the stock rom.Can someone make a guide or post a guide on how to do that??
Thanks and sorry for my very bad english but im italian!!
search the forum here
Noitast said:
Hi all, i flashed the galaxy s4 KitKat ROM from jamal (THIS IS THE ROM http://forum.xda-developers.com/show...hp?t=2544474);
and now i want to return to the stock rom of the galaxy S4 but i dont know how to do.I tried to flash a stock rom with Odin but it didnt work and the Galaxy s4 at the start says "firmware upgrade encountered an issue. please select recovery mode in kies and try again".So i flash a stock recovery and now it works fine but i want to go back to the stock rom.Can someone make a guide or post a guide on how to do that??
Thanks and sorry for my very bad english but im italian!!
Click to expand...
Click to collapse
search the forum n there are many useful posts for getting back to recovery like very detailed posts so search the first before creating new threads ...
if nothing helps like when u tried everything then go to local repair shop .. , they will charge max 40$ but that will save ur warranty.
Hi !
Pls help with S3 neo 4.4.4.
I try few roms from Samsung but no success
first time I download with OTA update but when phone is get update ... I get odin screen with DOWNLOADING... with the message " could not do normal boot"
then I put back 4.3 with odin official update and the pone is working...
then I try few roms 4.4.4. official (India Kazakhstan Hon Kong) but no success always the same (odin) screen after update.
What I do wrong ?
now running 4.3 :crying:
GT-I9300I
s3ve3gub
I9300IUBUAND1
MSM8228
I have the same problem
I have the same problem. my phone is identical to yours April 2014 I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT--- I hope someone has a solution for our problem
Pls need solution or tip how to update my GT-I9300I Neo+ to Kitkat 4.4.4 ......
Here is my problem...I rooted my s3 neo gti9300i using towelroot and it worked ...I also didn't flash any custom recovery.. I bought my phone in june...its my first android phone...but nw I can't update as my device status is "MODIFIED"...I installed xposed and changed my device status to "OFFICIAL" using wanam xposed...I got the latest update 4.4.4...I downloaded but when it booted its self and started installing an "ERROR"...so I removed xposed and unrooted my phone using supersu...then again tryied nw ..not possible to get update server say that my system is modified...what to do nw...pls help...its my 1st phone..?
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
mariosraptor said:
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
Click to expand...
Click to collapse
whether they can pit file for Europe and rom for Kazakhstan because I found the pit to Europe. my phone is I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT Trinidad and Tobago.
Any solution for mine...
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
nattila said:
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
Click to expand...
Click to collapse
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
nattila said:
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
Click to expand...
Click to collapse
Send it to Samsung... They definitely know how to put Kitkat on your device!
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Rox said:
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Click to expand...
Click to collapse
Do you mean.... this one???
http://www.sammobile.com/firmwares/download/37860/I9300IUBUBNJ1_I9300IUUBBNJ1_TTT.zip/
I try few times to flash I9300IUBUBNJ1 thru Odin .... OTA ... KIES .... no success ..... I have a weird phone ....
thanks for a tips
And yes ,,,,,,,my phone is UB variant .... maybe Samsung is not released firmware for my phone .....
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Still no luck with update to 4.4 ... ......
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
i cant install a firmware because , look at the photo , i tried 3 different Firmwares help !!!!!
nattila said:
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Click to expand...
Click to collapse
I am working on the same exact phone and I have having a hard time finding the right firmware for this phone.
It is stuck on recovery. I get a could not do normal boot and back to recovery. So I was planning on flashing a stock rom to get it out of recovery. Every how to page talks about going into setting to find your firmware version. This makes it hard when you cannot get into phone settings.
If you ever find the right Rom for this type of phone Please reply. Every rom site I have visited does not have the correct one.
This is most probably a hardware issue. Something on the main board got fried or some other glitch took place in a hardware component. Send it to Samsung for a repair or better buy a new phone.
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
Another idea is to use Smart Switch. You don't need a running phone this time. Just choose the firmware initialization option and enter your device model and serial number, and you're good to go. If this didn't work, send it to Samsung or give it a goodbye kiss.
I did a mistake, it is possible to move this thread on help section?
Hi all, today ASUS released the OTA but in some days the full rom will be also avaible.
I want to do a fresh install but i don't know how do this :crying:
I was a Samsung S2 Plus user and there was really easy flash something but on ZF2 with fastboot and recovery i don't know where go.
I am using full stock ROM unroot never touched. There is a SAFE way to flash a full firmware? I read that someone deleted some partition and IMEI was lost
Thanks for the help.
Regards,
LightDestory.
Hi Everyone and thanks for this beautiful forum that helps a lot !
Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried.
Does anyone know a alternative way for my S7E to go back to a clean and stock ROM ?
Here are some infos about my phone :
base band : XXU2ERB2
peripheric : hero2lte
knox : 0x0
processor : exynos5
GPU : ARM Mali T880
Bootloader : G935FXXS2DRAA
PDA : XXU2ERB
CSC : OXM1CRAP
Thanks a lot for your help guys !
I see that I have still no answer. Let me know if I need to give more details or be more specific.
Thanks !
antoflos said:
Hi Everyone and thanks for this beautiful forum that helps a lot !
Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried.
Does anyone know a alternative way for my S7E to go back to a clean and stock ROM ?
Here are some infos about my phone :
base band : XXU2ERB2
peripheric : hero2lte
knox : 0x0
processor : exynos5
GPU : ARM Mali T880
Bootloader : G935FXXS2DRAA
PDA : XXU2ERB
CSC : OXM1CRAP
Thanks a lot for your help guys !
Click to expand...
Click to collapse
Try Samsung Kies or Smart Switch, they both have emergency options
riseofsand said:
Try Samsung Kies or Smart Switch, they both have emergency options
Click to expand...
Click to collapse
I tried but as my S7edge is rooted, it's not working ....
antoflos said:
I tried but as my S7edge is rooted, it's not working ....
Click to expand...
Click to collapse
You cant flash with Odin?
If so, check repartition and try again
riseofsand said:
You cant flash with Odin?
If so, check repartition and try again
Click to expand...
Click to collapse
What do u mean by "check repartition" ?? With odin or another software...
Forget about that, i think that since you went up to Oreo you cant go back to Stock Nougat.
Reflash TWRP and BlackPearl rom (im using it its really good) and wait for official Oreo then go stock
edit: check that post https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963
riseofsand said:
Forget about that, i think that since you went up to Oreo you cant go back to Stock Nougat.
Reflash TWRP and BlackPearl rom (im using it its really good) and wait for official Oreo then go stock
edit: check that post https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963
Click to expand...
Click to collapse
Well ... I could maybe. If I install via twrp a nougat custom rom... then i might be able to do it...no harm trying Hey !
antoflos said:
Well ... I could maybe. If I install via twrp a nougat custom rom... then i might be able to do it...no harm trying Hey !
Click to expand...
Click to collapse
I've gone back and forth several times, and the only issue I see is the fact that the most current/up-to-date TWRP (3.2.1.x) is buggy with Nougat ROMs. Can you still enter recovery?
MartyHulskemper said:
I've gone back and forth several times, and the only issue I see is the fact that the most current/up-to-date TWRP (3.2.1.x) is buggy with Nougat ROMs. Can you still enter recovery?
Click to expand...
Click to collapse
Yes i can enter in recovery mode no pb ! Finaly I stayed on a custom rom : OSlineage and I'm very glad with it ! No Google ****s, really quick , clean ... lovin' it !
Hello guys I really need your help!
I had a Nougat stock rom on my S7 Edge and when Fortnite was released I installed it but it was so laggy and asked me to update to the new version of android. So I found a custom rom that was perfect was called "Black Pearl" S9 ported to S7
then I opened fortnite but it seemed like the rom was rooted or something fortnite asked me to turn of OEM lock so I did so and since then I got the message " Custom binary blocked by FRP lock.
so now I can't figure what to do, I am installing a stock rom with odin but it keeps saying FAIL! FAIL! everytime maybe it's because of turning off OEM or something.. I don't really know what to do now! HELP!
Help me please!
FRP lock does not block official firmware flashing through odin.
It just prevents custom firmware from being installed.
You have to flash official firmware its the only option, choose the correct region when you are downloading the firmware.
If you don't know what region your original phone firmware was then use samsung smart switch to emergency reset the phone.
pingufanpoy said:
FRP lock does not block official firmware flashing through odin.
It just prevents custom firmware from being installed.
You have to flash official firmware its the only option, choose the correct region when you are downloading the firmware.
If you don't know what region your original phone firmware was then use samsung smart switch to emergency reset the phone.
Click to expand...
Click to collapse
Smart switch doesn't recognise that its a samsung being connected it says this device is not supported
Someone helppp!!!
Maroiex said:
Someone helppp!!!
Click to expand...
Click to collapse
U need to flash stock rom of ur android device through odin.. u can download odin from Google.. and look for your devices origional firmware from sammobile etc. U can also watch videos on youtube about flashing the stock firmware on s7. Its ez
Xial Xahab said:
U need to flash stock rom of ur android device through odin.. u can download odin from Google.. and look for your devices origional firmware from sammobile etc. U can also watch videos on youtube about flashing the stock firmware on s7. Its ez
Click to expand...
Click to collapse
I download my official firmware and odin keep saying fail after like half an hour! it doesn't seem to work bro that's why it's not as easy as you think it is I know how to flash the roms and have flashed them before many times but man this time is different idk what to do
It doesn't accept installing any roms even I tried installing twrp.img but it failed? so what's the problem guys help if you can cuz I am broke to buy a new phone right now!