Hi All,
I am new to this forum and glad I found it as it seems full of skilled people on Android Head Units
Here is my issue:
I have a 1DIN Android Head Unit RK3188 with motorized screen with the following specs:
MCU: MTCC-KLD5-v2.98
The Android menu at the top of the screen is randomly not working and I can't use any of the icons on it, so I need to reset the full unit to be able to exit an application.
In the beginning it occurred rarely but now it is almost all the time.
I just upgraded the firmware but it is still the same. I don't think it is hardware related as only the top menu is impacted.
Did anybody faced this issue before? And if yes, do you know any fix?
Thank you
PM
Hi All,
Just found a post from Pekass who is facing the same issue as me with the status bar not working:
https://forum.xda-developers.com/android-auto/android-head-units/mtcc-touch-screen-t3626023
If anyone can help, that would be great
PM
Hi guys, I have previously posted about my A-sure L2ovb Head unit crashing. Im looking for a way to restore the head unit that runcs on windows embedded automotive 7. I have contacted A-sure but their customer service is shocking.
What happened was the head unit =cut out when it was scolling pictures on the screen from the sd card i inserted.
now, the screen remains black until the reset button is pressed with a pin, then a quick flash of the vauxhall logo would appear on the screen before returing to the previous black screen
I removed the canbus box and run a direct 12v to the yellow wire on the unit and the red on canbus wire to test and it still remain in the same state, So that rules out the canbus box being faulty.
The only option left is to restore/reflash the unit with wince 7 but i cant find any recovery files for it.
Why did i buy from A-sure? its 8 month old and i was told i would be getting 2 years warranty! yeah, maybe if the replied to my Emails!! Though i did love the unit when it was Working.
Any you guys got any advice? I didnt get any replies on the previous post.
Regards Charlie
Hi all, I recently purchased a Bonroad 8.8" android head unit for a BMW 3 series.
Everything works great, except I cannot find where to enter the extra menu.
I'm having a few issues and their response time has been slow.
My car is a manual, but the head unit thinks its an automatic. The problem is when I shift into reverse I cannot get the reverse camera to appear on screen.
Second is i'm trying to change the screen resolution so the original BMW menu is not cut off.
It is currently running android 10.0. Does an MCU file exist anywhere that I can flash it to get access to the extra menu?
Thanks!
FLBimmer said:
Hi all, I recently purchased a Bonroad 8.8" android head unit for a BMW 3 series.
Everything works great, except I cannot find where to enter the extra menu.
I'm having a few issues and their response time has been slow.
My car is a manual, but the head unit thinks its an automatic. The problem is when I shift into reverse I cannot get the reverse camera to appear on screen.
Second is i'm trying to change the screen resolution so the original BMW menu is not cut off.
It is currently running android 10.0. Does an MCU file exist anywhere that I can flash it to get access to the extra menu?
Thanks!
Click to expand...
Click to collapse
hey im facing the same issue did you ever get this sorted out?
f32mick said:
hey im facing the same issue did you ever get this sorted out?
Click to expand...
Click to collapse
I got “instructions” from the seller on changing the resolution, but I cannot access the so-called advanced settings. I cannot see my oil level anymore on the iDrive! I don’t want to get a low oil warning. I cannot change from km to mph. I get BT warnings in Chinese as well (it is funny and not really an annoyance).
Wondering has anyone seen this problem, I have the bonroad android screen for f30. When I open the door a 3 series comes up but when I go into reverse camera a 1 series comes up?
Hello all,
I really hope someone could help me out or point into right direction.
I bought a 10 inch CIC android screen from alie and installed it. However the original infotainment system of the car is not showing. Shows just a black screen.
The rest of the android functions seem to work. Car buttons like menu, nav, radio etc, seem to be working but the knob joystick doesn’t work probably also.
When I plug back the original screen, it works just fine.
i read that I need to change the car type in the factory setup, however my unit doesn’t have factory setup menu.
Any idea how to open it? Or could there be another issue?
Thank you guys in advance for any help you can give me
Edit: the seller won’t respond
Not MTCB, have requested Mod moves to Android head units forum, but is unable to move this thread.
Is there not a "Factory" item on your first menu, The password to get in can be 1-3-1-4 But first of all I would double chack you have fitted all the connections properly
Hello ! Can i have a copy of you firmware of the unit? I bricked mine. Thank you.
Hi mate did you manage to get the display working, I’m currently running through the same issue
Same problem on e60 ccc
Did anyone ever sort this issue, i have the exact same issue i cant seem to resolve
I have the exact same issue as well, will report back if found a solution
Hello, i have exact same problem. BMW F11
HMI: BMW.G5.D.Q.F.01.2022.08.10.14.42
There is no option for changing screen resolution. Please report when someone finds solution
Hello sorry for my English I use a translator I find myself with the same problem I installed everything well on my e60 the Android car radio the wheel works but when I go to car info impossible to find the menu to change the screen resolution does not exist I cannot have the original ccc menu I do not know if anyone has found the solution to this problem thank you for your help.
Beto675 said:
Same problem on e60 ccc
Click to expand...
Click to collapse
Hello, you have found a solution to these problems.
duckman60 said:
Hello, you have found a solution to these problems.
Click to expand...
Click to collapse
Change the solution in the menu try all, one of them must be work
I don't understand could you please explain to me in more detail
Beto675 said:
Change the solution in the menu try all, one of them must be work
Click to expand...
Click to collapse
I don't understand could you please explain to me in more detail
duckman60 said:
I don't understand could you please explain to me in more detail
Click to expand...
Click to collapse
You can change the solution look in youtube theres a few tutorials
Hi guys, I’m new to the forum so apologies if this is in the wrong section.
Im looking for a bit of help if possible please, I’ve got the PX5 running android 8 installed in my 2015 Vauxhall Astra J VXR.
When running the standard cd400 usually when I put it into VXR mode the instrument cluster turns to red from white however since installing this unit it stays white when in VXR mode.
I’m presuming it’s something to do with the canbus settings however I can’t find it, anyone got any ideas?
Pictures attached are of the software it’s running...