Hello I need to flash a tv box that used to be equipment from ISP. It's a same to throw it away and because it has custom android tv os it's locked now I try to find a clean android tv os to flash it and use it as normal tv box. I can't find anywhere a link to download the os and ofc I will need some instructions.
stefanosapostolopoulos said:
Hello I need to flash a tv box that used to be equipment from ISP. It's a same to throw it away and because it has custom android tv os it's locked now I try to find a clean android tv os to flash it and use it as normal tv box. I can't find anywhere a link to download the os and ofc I will need some instructions.
Click to expand...
Click to collapse
you provided zero information, I'm not sure how people can help you with no details at all?
you need to provide the make/model of tvbox, android version it came with, post pictures of the box, if you're able to post pictures of the pcb board might be required
donmega_icecube said:
you provided zero information, I'm not sure how people can help you with no details at all?
you need to provide the make/model of tvbox, android version it came with, post pictures of the box, if you're able to post pictures of the pcb board might be required
Click to expand...
Click to collapse
Hello the info I found is this click here
Related
I have a fake chineese Mini PC stick with Rockchip RK3066 and RTL8723BS WiFI and Bluetooth, 1GB/8GB.
Printed on the case: MK809 III Android 4.2 Mini PC Quad Core---it is a dual core !
I have made also some extra holes in the front to open it up for wifi antenna signal --plastic was shielding it !
Memory chips are : Two Samsung chip
The ROM has a white sticker:
E809 8G/1G
2014.10.11
XT201409294187
Tried to flash already some ROMs, none booted up, needed to reload vendor supplied original ROM.
Looking for a suitable ROM for this device, any suggestion ?
Thanks!
jeno1957 said:
Tried to flash already some ROMs, none booted up, needed to reload vendor supplied original ROM.
Looking for a suitable ROM for this device, any suggestion ?
Thanks!
Click to expand...
Click to collapse
Have you this original ROM. I have this same Stick. Dont work with any custom ROM. I havent make backup
Give this one a try:
change xx to tt
hxxp://pan.baidu.com/s/1qWGuqbM
it is for a Rk3066 with Rtl8723 BS wifi 1gb/8gb
use Rkbatchtool to flash it ---update or restore
good luck
Unfortunately it still didnt work
Could you send me your backup ROM?
My original android version was kitkat 4.4 but your 4.2 should work too, becouse we have the same hardware.
andrev2000 said:
Unfortunately it still didnt work
What exactly did not work?
Could you describe in details what did you do ?
Click to expand...
Click to collapse
With this Rom:
hxxp://pan.baidu.com/s/1qWGuqbM i have black screen like 90% others ROM.
Android will load only with that both:
hxxp://chinagadgetsreviews.blogspot.de/2014/11/download-android-kitkat-44-stock_28.html
hxxps://mega.co.nz/#!iV0hgS4b!ELMBLEnDgt906yTkNYIsUFIdAnt_-HN2YwW3nnRMxjU
but without wifi and bluetooth.
jeno1957 said:
Give this one a try:
change xx to tt
hxxp://pan.baidu.com/s/1qWGuqbM
it is for a Rk3066 with Rtl8723 BS wifi 1gb/8gb
use Rkbatchtool to flash it ---update or restore
good luck
Click to expand...
Click to collapse
hi Jeno, i'm stuck in your same problem, can you host the image file somwhere else? broken link.
thank you
china
I found this link but I can not download because of that registry checker in Chinese!
If someone please get save to another site and leave the link here!
change xx to tt
hxxp://pan.baidu.com/wap/link?uk=149...359029&third=0
Read More at : hxxp://freaktab.com/forum/tv-player-support/rk3066-devices/23652-firmware-for-mk809ii-rk3066-rtl8723bs-wifi
Firmware & 1080p/720p OC Kernels Available
Over at Freaktab I've uploaded updated firmware and kernels for the MK809II / XT-E809-V10 with RTL8723bs WiFi/BT chipset.
Separate kernel images uploaded as well for those with their own ROMS already up and running.
http://freaktab.com/forum/tv-player...nels-for-rk3066-xt-e809-v10-mk809ii-rtl8723bs
I searched and could not find LEMFO LF06 , so making new thread.
i think the software is not android for the watch as no version number in details,
but it connects perfect, but the " fundo wear" app given by manufacturer for connecting to my HTC m8, is having limited functions, mainly i need custom watch faces, i tried many but no one shows up in the my applications of this FUNDO app, and niether in watch, anybody please help.
watch is good in this price as notifications are ok.
Hello.
You are correct. App is absolutely terrible.
Also watch has problems with automatic time sync. It uses old timezone data, so for example in Russia watch shows incorrect time (+1 hour).
I have contacted with seller on Aliexpress and they talked with manufacturer. Seller sent me new firmware, which MAY be fix this problem....will see.
But they didn't sent flasher utility So i have firmware but don't have ability to flash Comic situation.
Actually i can tell that some functions is working fine (phone calls, sms, notifications).
Pedometer looks buggy, sleep information IMHO is incorrect ( Fundo wear even can not sync this information from watch ).
So i'm not sure that it is ready for market product. Software needs to be improved.
Add Applications
I have no problems with connections or synchronising. They working fine.
But I want to add new application other then the 5 mentioned in de App menu on the Smartphone site.
Anybody an I idea how I can do that?
JanStalenburg said:
I have no problems with connections or synchronising. They working fine.
But I want to add new application other then the 5 mentioned in de App menu on the Smartphone site.
Anybody an I idea how I can do that?
Click to expand...
Click to collapse
Actually it working fine, but as our government changed timezone information not all Android devices show time correctly.
I asked can developers change timezone files...seller asked manufacturer...so in result i have new firmware for watches and in comments is told that this version has fixes with BT synct and other improvements ....but i can not flash it.
There is no utility to flash....so i can share it if someone wants.....may be together we can find the way how to flash it
WBR
Mikchel said:
Hello.
You are correct. App is absolutely terrible.
Also watch has problems with automatic time sync. It uses old timezone data, so for example in Russia watch shows incorrect time (+1 hour).
I have contacted with seller on Aliexpress and they talked with manufacturer. Seller sent me new firmware, which MAY be fix this problem....will see.
But they didn't sent flasher utility So i have firmware but don't have ability to flash Comic situation.
Actually i can tell that some functions is working fine (phone calls, sms, notifications).
Pedometer looks buggy, sleep information IMHO is incorrect ( Fundo wear even can not sync this information from watch ).
So i'm not sure that it is ready for market product. Software needs to be improved.
Click to expand...
Click to collapse
flashing utility
Thanks for posting the flash utility. My wife got me this watch last week as a lower price intro to smart watches to see if I liked it. So far I have, I just would like to do a few more things with it. I will attempt to update the firmware and see how that goes. Thanks again for posting this.
ArctikBound said:
Thanks for posting the flash utility. My wife got me this watch last week as a lower price intro to smart watches to see if I liked it. So far I have, I just would like to do a few more things with it. I will attempt to update the firmware and see how that goes. Thanks again for posting this.
Click to expand...
Click to collapse
---------
I am unable to sync SMS and Watsapp on this watch (LF06). Can you suggest a way, how it can be done? If it requires flashing with a new firmware, please guide.
A tutorial or steps to flash new software will be helpful.
Hello.
Here it is:
https: // yadi.sk/d/H5-63JDdmeGiH
First at all - i DID NOT flash this firmware to my watch, so ALL that you will do is on your own risk.
Hope this will help to someone.
WBR,
---------- Post added at 11:55 AM ---------- Previous post was at 11:50 AM ----------
Golem_ said:
flashing utility
Click to expand...
Click to collapse
I did not have time to download this tool, but link disappeared, could you provide this link again here or using PM
WBR
Mikchel said:
Hello.
Here it is:
https: // yadi.sk/d/H5-63JDdmeGiH
First at all - i DID NOT flash this firmware to my watch, so ALL that you will do is on your own risk.
Hope this will help to someone.
WBR,
---------- Post added at 11:55 AM ---------- Previous post was at 11:50 AM ----------
I did not have time to download this tool, but link disappeared, could you provide this link again here or using PM
WBR
Click to expand...
Click to collapse
of course
https://drive.google.com/folderview?id=0B_PhIaLE_-ogLTdYc0dlVUhMTzg&usp=sharing
before flashing do a full readback!
Golem_ said:
of course
before flashing do a full readback!
Click to expand...
Click to collapse
unfortunatelly drivers isn't suitable for device. Device has other PID. Even i change in inf file PID - no success.
So if someone has correct drivers please share it.
WBR
Mikchel said:
unfortunatelly drivers isn't suitable for device. Device has other PID. Even i change in inf file PID - no success.
So if someone has correct drivers please share it.
WBR
Click to expand...
Click to collapse
check now the link, I put there anything I have about mtk drivers
Golem_ said:
check now the link, I put there anything I have about mtk drivers
Click to expand...
Click to collapse
Thanks for your help, but all seems useless.
Device has VID 0e8d and pid 0002
all drivers start to search PID 0003 and other.
So if someone can update FW please share instructions how to do....
WBR
Mikchel said:
Thanks for your help, but all seems useless.
Device has VID 0e8d and pid 0002
all drivers start to search PID 0003 and other.
So if someone can update FW please share instructions how to do....
WBR
Click to expand...
Click to collapse
Through your usb are getting connected a lot of hardware components from your watch - relative to the phone status, you cannot say what's pid or vid of your device as long as in this special case appears for less than 2 seconds in device manager, if doesn't find drivers dissapears Did you stop the phone and start a process in flashtool before connecting the phone?
http://niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html
For all mtk phones the process is the same (feature phone as yours or android) so do the steps described in tutorial, it worked for me for more than 15 different types of watchphone, it worked for a lot of other guys here around so it has to work for you as well
Golem_ said:
Through your usb are getting connected a lot of hardware components from your watch - relative to the phone status, you cannot say what's pid or vid of your device as long as in this special case appears for less than 2 seconds in device manager, if doesn't find drivers dissapears Did you stop the phone and start a process in flashtool before connecting the phone?
http://niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html
For all mtk phones the process is the same (feature phone as yours or android) so do the steps described in tutorial, it worked for me for more than 15 different types of watchphone, it worked for a lot of other guys here around so it has to work for you as well
Click to expand...
Click to collapse
Ok, i flashed FW, thanks.
At least my watch not bricked
But problems still exist...timezone info incorrect
Mikchel said:
Ok, i flashed FW, thanks.
At least my watch not bricked
But problems still exist...timezone info incorrect
Click to expand...
Click to collapse
I had some doubts too that they will change entire OS because a request coming from just one or very few customers.
Golem_ said:
I had some doubts too that they will change entire OS because a request coming from just one or very few customers.
Click to expand...
Click to collapse
Actually i develop linux distros for embedded devices. It will take 5 minutes to recompile new tz info. I don't think that my request was first from Russian customers
Mikchel said:
Ok, i flashed FW, thanks.
At least my watch not bricked
But problems still exist...timezone info incorrect
Click to expand...
Click to collapse
Hi, Thanks for the files, tools and this test.
Ok, it did not fix the timezonz but dit it fix/break anything else?
I don't have enough time to test. So if flash tool has backup capability then it is better save your current fw and flash this one.
You can test and decide which fw is suitable for you
Gone through the complete chain of communication but does LM07 / DM09 has customised watchface, can we
change the watchfaces the way we are doing for Apple watch, Moto 360 etc,
Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.
Could someone find a way to put wear os on mi watch global?? The base software isn't useful/can't install my own apps
Its not possible unfortunately. Even if someone did find a way, the actual SoC is pretty weak and it doesn't have enough ram to run wearos even in theory.
if it may interest you after some research I saw that the Chinese version of the watch allowed the installation of the application and I also found a tutorial to switch from a global version to a Chinese version then another tutorial to add gapps on it with a little bit of file manipulation
I have not tested yet because I receive the watch in a few days
https://www.reddit.com/r/Xiaomi_Mi_Watch/comments/e6ga4q
[MOD] Convert your Chinese Wear OS to Global Wear OS
If you bought your Android Wear devices in China, and decided to install Google on it without actually installing Global ROM, you are in the right place. This tool lets you convert your Chinese Wear OS ROM to a "Global ROM". It works by deleting...
forum.xda-developers.com
I also forgot to specify that the majority of xiaomi products offer the English language on the Chinese version so there will only be the configuration which will be complicated once this step is over you will be easy I don't think I'm too wrong in saying that.
Pikatsuto said:
if it may interest you after some research I saw that the Chinese version of the watch allowed the installation of the application and I also found a tutorial to switch from a global version to a Chinese version then another tutorial to add gapps on it with a little bit of file manipulation
I have not tested yet because I receive the watch in a few days
https://www.reddit.com/r/Xiaomi_Mi_Watch/comments/e6ga4q
[MOD] Convert your Chinese Wear OS to Global Wear OS
If you bought your Android Wear devices in China, and decided to install Google on it without actually installing Global ROM, you are in the right place. This tool lets you convert your Chinese Wear OS ROM to a "Global ROM". It works by deleting...
forum.xda-developers.com
Click to expand...
Click to collapse
If I will mess something is there way to bring it back to global version?
Winiary said:
If I will mess something is there way to bring it back to global version?
Click to expand...
Click to collapse
honestly I can't tell you because I made the choice not to do it on my watch. you should know that when you make changes it's a risk to take. After doing some research I think you can find it. I couldn't find any, but I only did a search or two. and I think you will find answers more easily than me because you are English. I am French, so the content of help sites on this kind of subject is less well provided for me
Pikatsuto said:
honestly I can't tell you because I made the choice not to do it on my watch. you should know that when you make changes it's a risk to take. After doing some research I think you can find it. I couldn't find any, but I only did a search or two. and I think you will find answers more easily than me because you are English. I am French, so the content of help sites on this kind of subject is less well provided for me
Click to expand...
Click to collapse
actually im from poland
I also think that,iit is not possible unfortunately but this one. Even if someone did find a way, the actual SoC is pretty weak and it doesn't have enough ram to run wearos even in theory.
i am using xm129 version i want to revert back to xm128 version, is there any method to do that
Cant connect bluetooth after upgrading my samsung to android 13. What is best firmware for me to upgrade to?. Please help!! My player finds phone and phone player but cant connect so cant stream music longer from that phone
DanielK77 said:
Cant connect bluetooth after upgrading my samsung to android 13. What is best firmware for me to upgrade to?. Please help!! My player finds phone and phone player but cant connect so cant stream music longer from that phone
Click to expand...
Click to collapse
You just need to search for S32F0 (this is your MCU version) in this forum.
Give it a try. At least https://forum.xda-developers.com/t/...-px5-mcu-s32f0-rk3368-with-android-9.4194651/ could be found on first position.
BTW: Your pictures from Device Info do not help. Important are always just the picture from MCU and Firmware version.
rigattoni said:
You just need to search for S32F0 (this is your MCU version) in this forum.
Give it a try. At least https://forum.xda-developers.com/t/...-px5-mcu-s32f0-rk3368-with-android-9.4194651/ could be found on first position.
BTW: Your pictures from Device Info do not help. Important are always just the picture from MCU and Firmware version.
Click to expand...
Click to collapse
Now i think the only picture that matters is in thread. I maied the guy that thid this firmware that you say to try. He i russian so i dont want to install if i cant get hold of him becouse i must pay to get full version
DanielK77 said:
Now i think the only picture that matters is in thread. I maied the guy that thid this firmware that you say to try. He i russian so i dont want to install if i cant get hold of him becouse i must pay to get full version
Click to expand...
Click to collapse
Just post your question in this thread. There are a lot of user who can support you.
Yes, Malaysk is Russian, but what is your problem with it? Nevertheless you can try the free version first if this fixes your issues and then decide without pressure if you buy this firmware.
rigattoni said:
Just post your question in this thread. There are a lot of user who can support you.
Yes, Malaysk is Russian, but what is your problem with it? Nevertheless you can try the free version first if this fixes your issues and then decide without pressure if you buy this firmware.
Click to expand...
Click to collapse
I have no problem that he is russian but if i want to get full version i must know that he is able to get my mail to activate full version.
Is malaymod better then Hal9k or are they simular?
This is not a radio software problem but a bug in Samsung's Android 13 for Galaxy s21.
Summary of my adventures with the S21 update to Android 13. HOWEVER, SAMSUNG ****ED SOMETHING WITH BLUETOOTH IN A13, maybe it will be helpful to someone. But in turn: after updating the S21 to A13, the phone stopped connecting to the Android radio in the car. The devices saw each other but did not connect. Restarting devices, turning off/on BT, resetting network settings and here and here didn't help. Restoring the S21 to factory settings also did not help, as well as flashing Android 13 to the S21. All that was left was to restore to mouth. factory radio in the car but here is a complete disappointment: they see each other but still do not connect I was nervous to the max, I quickly downloaded the previous Android 12 soft on S21 and ? And voila: there is a BT connection, everything works as before !!! Thank you for your attention.