Hi,
I've just bought a RK3188 Android TV and I was wondering 2 things. 1 - How can I mirror my GS4 screen on my TV via the RK3188 Android TV? 2 - Does anyone know if it's possible to control the RK3188 Android TV with the GS4 via wifi or blu tooth?
rawfa said:
Hi,
I've just bought a RK3188 Android TV and I was wondering 2 things. 1 - How can I mirror my GS4 screen on my TV via the RK3188 Android TV? 2 - Does anyone know if it's possible to control the RK3188 Android TV with the GS4 via wifi or blu tooth?
Click to expand...
Click to collapse
HI, i have same stuff, have you found a solution?
thank you
I have purchased an Xtrons PF75ATTA. As I understand this information is some what useless so other information includes (MCU Version: MTCD_GS_V1.75_1 and Build Number: rk3188).
As I am sure most owners of similar headunits find even basic technical support is some what limited. So to my question
On the back of the unit I have a 8 pin connector titled D: split machine 3 ipod. In the factory settings it says ipod = yes. and there is an ipod app as part of the stock rom.
xtrons tell me the unit doesn't support ipod but I get the impression that is not the end of it. The back of the unit looks identical to other units and the cable for a pimpkin hu device looks like the cable I need (Unfortunately I am to much of a noob to be trusted to post links at the moment). So I guess my questions are as follows
1. Does anyone else have a unit which specifies it doesn't support Ipod yet has ports for it (other than USB)
2. Has anyone successfully got this working?
3. If so where did you get your cable from or did you make it?
4. If you made it what were the pinouts?
Thanks
i could never get an iPod to work right on my Joying and when I posted on the Joying forum, seemed like no one else could get it to work either.
Prior to getting the Joying, I was emailing with RoadNavi.com's support about the S160 series, and they also said their units didn't really work with an iPod
CadillacMike said:
i could never get an iPod to work right on my Joying and when I posted on the Joying forum, seemed like no one else could get it to work either.
Prior to getting the Joying, I was emailing with RoadNavi.com's support about the S160 series, and they also said their units didn't really work with an iPod
Click to expand...
Click to collapse
With your joying did you have a specific ipod cable with ipod connector on one end and proprietary connector on the other end or were you using a standard ipod to usb connector and plugging it into the usb port? This can't be that difficult to do. My old Parrot Asteroid did it with no problems.
i used an iPod Classic with a 30 pin connector. I had a 30 pin to USB cord that worked fine in 2 different cars. I tried that on both the USB cords with no luck.
Road Navi does have an iPod specific plug and cable, but they said it didn't work right either
Yes, I can understand why a standard ipod 30 pins usb connector may not work. Can anyone share there experiences with a hui fei unit with dedicated ipod port and cable. Does it work as expected?
chammock said:
Yes, I can understand why a standard ipod 30 pins usb connector may not work. Can anyone share there experiences with a hui fei unit with dedicated ipod port and cable. Does it work as expected?
Click to expand...
Click to collapse
From what I have researched so far :- (Feel free to add or correct me) -
Standard IPOD Classic 6th gen works fine with the current Honda head units, which are still in the dark ages and running a Honda version of Android 6. !! (heavily LOCKED down so that nothing can be added with rooting)
Same device does NOT run on a Eonon GA2170B, running Android 8, even though the IPOD app is pre-installed, even when IPOD support that is turned off by default in Factory setting, is turned back on.
Turning on Ipod support still does allow Ipod Classic 6th gen to communicate with the installed Ipod App.
From what I have read, this is because the Eonon GA2170B is Android 8, and the "old" Ipod firmware is not compatible with the later Android versions.
There are Firmware alternatives for the Ipod (either permanent of via a dual boot), that claim to make the Ipods work with Android 8, with varying success, depending on the Model Ipod.
I have chosen to not mess with my Ipod, but rather to copy all its music onto a Mico SD card (or USB stick), and then use that in the Eonon unit with a suitable player, that can select Title, Album, Song, Artist from the Mp3's meta data.
Some many advantages of this are:
(a) Music is always in the Car,
(b) Ipod is NOT in the Car, getting HOT (or stolen)
(c) No need to worry about charging the Ipod.
(d) Far easier to add additional music (ITunes sucks )
I did find an OLD IPOD emulation Player app, that had a user Interface looking like the Classic Apple Ipod UI, but it was no longer on the Play Store, and when I got it from the author's website (5+ year old ), it also did not run on the Eonon Androis 8 unit.
BTW: My Eonon GA2170B is advertised as having 3 USB ports, but in fact it has 4 !
1 standard USB Port on the Back = USB 1
2 additional ports on a plug in cable to back = USB 2 & USB 3
1 Port on the front ( next to the front Mini SD port) USB 4
So, plenty of Ports to add USB storage devices with Music on them !!
Hi guys,
I'm working on a replacement for my Peugeot 508 multimedia&navigation unit because I need to implement new sensors & behavior, and I want also to use my phone Android Auto connected.
First of all, it consist on a 7 inches (or maybe more, if I find a way to rework the original housing with 3d printing) touchscreen (HDMI+USB) plus a brain and various proximity sensor (connected with various Arduino), 360 cameras & a CAN BUS bridge.
My first Idea was to use Raspberry Pi 3 with OpenAuto: it works with Android Auto (even with WiFi, that's mandatory for my project), but I know that maybe Raspi will got saturated.
My other Idea it's to use my old Laptop pc brain that's surely more powerful than Raspi.
But my doubts are:
1. is there an app that run on Windows (or Linux) that can be used to run Android Auto (client) supposing that my Phone will act as 'a server'?
2. Are there another low-cost brain solution that can help me reach my objective? PS: Android Auto radio can't be used here, because my 508 has different housing for touchscreen & 'brain'.
Thanks in advance at anyone that will reply.
PS: I don't know if this is the correct place for my post, but imho this seems the best place.
Hey everyone is there any software for a pc windows instead of android i came in to possession of 3X window 8.1 toshiba encore 2 wt8-b 1GB Ram tablets and wanted to use it a home made windows based head unit ? ..... please point me in the right direction thanks
I don't know;
but"s i have a old 1 din in car dash to install windows 10 or windows phone
i'm look for exploit it
Hey all,
I just got two Lenovo Yoga Book tablets, both are YB1-X90F models. One is dead (no power at all) and the other has a broken keyboard. My plan is to carry the (presumably) functional keyboard to the otherwise functioning tablet, and go from there.
I've seen these running Windows 10 and Android respectively. According to the specs I can see from the device itself in cpu-z as well as the internet searching that I have conducted, it appears as if the Android tablet uses an Intel CPU. My question then, is whether or not it is possible to simply install windows 10 on this thing? I would assume that it would be impossible because of the different bootloaders, but perhaps I'm wrong?
Alternatively, is there a newer ROM I could install on it to make it more secure and usable in 2022?
TIA