Hi guys, im going round the bend with my Vauxhall head unit from A-sure, the number on top starts L2OVBR.
I have seen a few posts about upgrading by sd for the S3 models of these same units, but none for my type.
I tried the S3 rom and it trys to load but i get error message about files being missing
INFO: CANT FIND MCU FILE
INFO:CANT FIND STM32VD.BIN
DVD:INFO: CANT FIND B288ROM
INFO:NAND ID EC F1 00 95 41 EC
This is the info i get when attempting to load the S3 rom. I assume the s3 and the L2 are not compatable?
What happened was while playing from usb the usb came loose and turned off, the unit then went blank.
Now when i press the reset with a pin, the car logo will give a quick flash then cut out. I have tried holding pin in for 2 min, tried combination of buttons but still the same.
Any help hould be great, If anyone could link me to the rom i need that would be great, As it does try to load the rom but i cant get the right one. A-sure dont respond to Ebay or facebook or Email.
Thanks for taking your time to read and i hope you can help me.
Regards, Charles
chicrfc said:
Hi guys, im going round the bend with my Vauxhall head unit from A-sure, the number on top starts L2OVBR.
I have seen a few posts about upgrading by sd for the S3 models of these same units, but none for my type.
I tried the S3 rom and it trys to load but i get error message about files being missing
INFO: CANT FIND MCU FILE
INFO:CANT FIND STM32VD.BIN
DVD:INFO: CANT FIND B288ROM
INFO:NAND ID EC F1 00 95 41 EC
This is the info i get when attempting to load the S3 rom. I assume the s3 and the L2 are not compatable?
What happened was while playing from usb the usb came loose and turned off, the unit then went blank.
Now when i press the reset with a pin, the car logo will give a quick flash then cut out. I have tried holding pin in for 2 min, tried combination of buttons but still the same.
Any help hould be great, If anyone could link me to the rom i need that would be great, As it does try to load the rom but i cant get the right one. A-sure dont respond to Ebay or facebook or Email.
Thanks for taking your time to read and i hope you can help me.
Regards, Charles
Click to expand...
Click to collapse
Nobody?
wince 7?
Looks like these units are loaded with Wince 7, I have emailed A-sure but no answer as of yet, im not surprised as all over the internet it is reported they aint interested, and when they do they want you to return the unit to china!
I have been looking all over the internet for the files i would need to repair the software but cant find a thing.
I downloaded a file called 117-nav-en-wince6 that was reported to help restore windows on these units but nothing with mine, just a blank screen until you press the reset button and then you would get a quick flash of the vauxhall icon and then goes black again.
Im wondering if something has fried inside the unit? but then it does try to load the wrong android files as it should, and the picture comes up when pressing reset so would imply the graphics chip is ok?
Nobody got any ideas at all?
ran 12v to the unit and canbus connection to rule out the canbus but it still does the same with the canbus box disconnected.
so def a problem with the unit. Am i alone in the forum? lol
Fixed the unit by restoring the software. I now have the software for the L2 and L4 A-sure models
just incase somebody else runs into the same problem, and gets about as much help as i did.
Least its fixed.
same problem
chicrfc said:
Fixed the unit by restoring the software. I now have the software for the L2 and L4 A-sure models
just incase somebody else runs into the same problem, and gets about as much help as i did.
Least its fixed.
Click to expand...
Click to collapse
my friend i have
Android 6.0 DVD GPS DAB+ für OPEL Astra H Antara Corsa D Vectra Zafira B Vivaro
and have the same problem,
can you help me?
thanks
hi chris where did you find the file to download have the same issue as you did
Sofia Su6-136A Dead after After trying to Update Firmware
I have android head unit which is working fine when i try to upgrade firmware with SD Card because after some time unfortunately setting has stopped error. After inserted memory card in SD Slot my unit has been died .
Unit only show brightened screen when i insert a memory card with update file in slot, unit making SLOG file on card.
Detail of Unit:
Skystar Su6-136A
1GB Ram
32GB Rom
10" full Touch
No Physical button without DVD
Hi,
I need help because my android car unit is currently stuck on the Android splash screen, before that problem the unit has worked well during 5 months.
I have sent a mail to the seller but i'm waiting for a response.
Here is the unit, this is exactly the same but mine running on android 6.1 :
search on aliexpress -> Uniway ZLKLZ7071
My question is : How do i can enter in the recovery mode ?
I mean that i proceed to a hard reset with a wipe cache...
But i have tried some combination key but not chance i can't enter to the recovery mode.
The canbus link is ok i can increase or reduce the sound and i can hear only one band on radio but android won't start and i see only the android splashscreen.
Can you help me ?
Thank you.
Did u find any solution?
A
No I have bought another unit from daisata and since I never have problem with This new unit it's more reliable than uniway one.
This uniway unit is very poor quality and unreliable don't buy This brand.
Hello ,
I would be very happy if anyone has a solution for my problem. Having spent a long time for search in this forum I even could not get an idea for a solution.
After a good first experience with a WinCE S100 I ordered a Witson PX5 RVF 4+64 for my Opel Astra J via AliExpress.
After the - very probably absolutely correct - installation a start screen was shown very briefly. Then the touch screen stayed black and still is. From Aliexpress I got only confusing information from China. a.) A rar file with an image.rar, which is used to boot from an SD-Mini-Card. b.) Videos showing a completely different approach using DriverAssistant 4.5 and Factory Tool 1.45e.
If I connect the (removed) radio to a 12 Volt laboratory power supply (ignition plus, continuous plus and ground) nothing happens. The fuse in the back is ok. But unit and display unit are dead. Even if I switch on the power with SD-Card (with the rare or the unzipped file) nothing happens. Also, if I copy the rar file to a USB stick and connect it to one of the slots in the back. Nothing flashes, no sound.
Maybe someone has a link or a hint for me where I can start. If all else fails I will send the device back. But I'd like to get it up and running. BTW: The Astra version has no buttons on the display and not even a reset button...
Thanks in advance for any advice.
macraq
macraq said:
Hello ,
I
would be very happy if anyone has a solution for my problem. Having spent a long time for search in this forum I even could not get an idea for a solution.
After a good first experience with a WinCE S100 I ordered a Witson PX5 RVF 4+64 for my Opel Astra J via AliExpress.
After the - very probably absolutely correct - installation a start screen was shown very briefly. Then the touch screen stayed black and still is. From Aliexpress I got only confusing information from China. a.) A rar file with an image.rar, which is used to boot from an SD-Mini-Card. b.) Videos showing a completely different approach using DriverAssistant 4.5 and Factory Tool 1.45e.
If I connect the (removed) radio to a 12 Volt laboratory power supply (ignition plus, continuous plus and ground) nothing happens. The fuse in the back is ok. But unit and display unit are dead. Even if I switch on the power with SD-Card (with the rare or the unzipped file) nothing happens. Also, if I copy the rar file to a USB stick and connect it to one of the slots in the back. Nothing flashes, no sound.
Maybe someone has a link or a hint for me where I can start. If all else fails I will send the device back. But I'd like to get it up and running. BTW: The Astra version has no buttons on the display and not even a reset button...
Thanks in advance for any advice.
macraq
Click to expand...
Click to collapse
Send it back, or raise a dispute before it's too late, unit is defective.
Hi All,
looking for help, I've a android head unit. Assume its a Chinese version from what i see online. i get the same boot error on my 3rd device now.
If anyone can shed some light id really appreciate it.
as soon as the unit boots up i just get a camera with an exclamation mark in it, almost like its looking for a camera. I hook up the camera and cant get past the camera screen. i would think you dont need to hook a camera up at all but i may be wrong.
Losing the will to live with it.
David
Hello people,
Since 2022, September, I`m struggling with an issue on my TS10 Navi.
Whenever i turn on the engine the only thing that i get to load is the "Honda" logo and nothing seems to work.
I already tried this video (
As the Aliexpress seller told me, i wired the navi accordingly so i can go and reset it and whenever i do that i get the next message:
LCD_INFO:720x1200_MB_3L_ICNL9707_90_99_20210601
I will attach some print screens and the video according to my issue( I was angry while trying to solve the issue)
If there is anyone willing to help I will definitely appreciate!
Link with my video for the issue:
Much love!
Thanks, PIerre