So i successfully rooted my unlocked att version of the s5e.
everything was great until i popped my sim back in and the device wouldnt connect to att's network
im assuming thats it because the base os firmware was CDMA and not GSM so the bands i needed werent available.
i flashed another os i think its tmobile. no oem unlocking feature in the developer mode. im trying the trick to unlock it with not luck.
anyone have any advice?
So i figured something out. as ive been trying to flash different firmware.
it is now rejecting ALL Cdma firmware. and will only accept GSM firmware.
So after trying everything i finally just started trying every version of odin i could find. and finally found one that worked lol
Jobudden said:
So after trying everything i finally just started trying every version of odin i could find. and finally found one that worked lol
Click to expand...
Click to collapse
Perhaps it will be helpful to others. Could you elaborate?
ok to start off i followed the steps from another post https://forum.xda-developers.com/t/...908u1-versions.4400511/page-155#post-88289615
i didnt have lte data and i needed it; so i reflashed ATT's firmware. when i went to try to load the us cellular firmware again. it would fail at system. everytime. after flashing lots of firmwares to get it to oem unlock, i finally discovered that. it was only failing on any firmware that was CDMA related.
spent an entire day and had almost given up.
then i started trying to flash the us cellular with every odin version i could find. and finally odin v3.13.1 raymond patched odin worked.
but after finally getting it to root again. i still have to figure out a way to get lte data on ATT sim
and i now have data with AT&T by following these APN instructions from AT&T
Program Data Settings for Your Device
Can’t connect to the internet on your mobile device? Here’s how to set up the access point name (APN) to get you going again.
www.att.com
used the broadband for android section,
hope this helps someone else
Related
I used Odin to flash a NC2 firmware. I found the firmware in the thread will the leaked KK files. After flashing that firmware ive been unable to connect to Net 10 service with either a ATT or Tmobile SIM card. If i put the Verizon SIM in, i almost immediately see 3G is available. I flashed a second (updated) firmware, and i still have this issue.
Is this a known issue? Anyone else have this issue? Im using BigginsROM cause flashing Hyperdrive causes a black screen when booting. I presume its cause HyperDrive isnt on NC2/NC4 yet. I hope this isnt permanent cause itd defeat the entire purpose of spending $900+ on the phone and accesories.
Any info/help would be greatly appreciated. If ive merely derped something feel free to let me know.
First this firmware: http://forum.xda-developers.com/showthread.php?t=2528707
Then this firmware: http://forum.xda-developers.com/showthread.php?t=2787627
I installed a SIM card info app. The app says that the phone is network locked to Verizon. The phone number that is showed is associated with the Net 10 AT&T SIM. Still says network locked and SIM operator is Verizon.
While further researching the issue i found that the servce menu reports "Network: UNBLOCK." The conclusion is that that means the phone is SIM locked. How in the world would i have managed to lock my phone?
While even further researching the issue i found that it might be the NC4 ROM that i flashed when i was having problems getting the KK leak to boot.
Edit.
Ok, I'm going to try to make a long story short, i hope that i've posted in the correct forum, I've been scouring this forum and others but nothing I've found has quite fixed my issue.
Got my S4 locked to Bell in Canada. Heard it was really easy to unlock [service menu *#0011# method] but once I got to Indonesia [for travel] expecting to be able to use my phone I found that the service menu was no longer available. Ok, no problem, there must be other ways;
I ended up paying for an unlock code from a site, it didn't work. In fact, immediately after I press 'unlock' it would say 'network unlock unsuccessful'.
I thought they gave me a faulty code but when the code I bought FROM Bell was the exact same one, and had the exact same problem I figured it was likely 'region locked'
I ended up flashing a stock rom with odin, one from a weird unlocking site, and eventually I got it working. The only problem was that whenever I'd go into screen lock I'd lose reception and have to airplane mode on and off to get it again.
After Indonesia I went to Turkey, was unable to connect at all with one of their service providers, but had no problems with Vodafone. I think this may have been a side effect of regionlock away app, I needed to use that as well.
Once I got back to Canada I went custom recovery with cwm and flashed Cyanogenmod. This was fine, no reception problems, 10.2 - 11 was all good.
NOW I am in Poland, and getting the same problem I had in the first place. Whatever Cyanogenmod did, re-locked my device, in some way, I'm guessing.
I'm now rooted, with TWP recovery, running Android 4.4.4 Dave GPE rom, and would REALLY like to be able to use my Polish sim card with this fantastic setup. Chainfire's regionlock away app does not work, gives me a CSC error message. My phone now says it's an i9505 instead of i337m
Anything I have overlooked? Any way I can get this fully unlocked and working the way I want it to?
*NOTE* I can't access *#0011# service menu, even though I flashed [i think] stock dialer.
You are not in the correct section
You need to be in this section.
http://forum.xda-developers.com/galaxy-s4-att/general
I can help you a little though. If the unlocking methodes fail, then it's usually because you don't have an older modem. You need to look for the modem you should flash in order for it to work. Afterwards you can flash the modem again you are on now. If you can't find it, just flash an old modem and try.
I find it hard to believe that Cyanogenmod could have caused this though.
Cool, that will be my next phase of attack. I appreciate the redirect and thoughts (Y)
Before you judge me by saying how i'm posting something thats done before, it hasn't, I've searched everywhere no methods work
Please, someone help me I've been at this for 4 days now and maybe just 15 hours of sleep :crying:.
The phone I have right now is the SGH-i337m Galaxy s4 running NC1 with MDJ modem (Kitkat 4.4.2) Does not detect sim, it says "No sim available".
I'm not exactly sure if the phone is from Bell but the phone use to be running fine on my old rogers sim card until I updated to their new ShareTap Sim.
With the ShareTap Sim the phone doesn't detect my sim anymore. So I tried my Share Tap Sim in another unlocked phone (Galaxy note 3) it worked fine.
Then I tried a Virgin mobile sim card on the S4 and it detected it and worked fine also. So then I tried to unlock it by flashing it with many different methods:
1. I tried flashing a older version of Bell 4.2.2 but it bricked my phone ( I already unbricked it back to 4.4.2)
2. I tried flashing the MDJ modem but it doesn't show the hidden menu.
3. I tried flashing ATT modem to try it but that also bricked my phone.
4. I tried to use the AWS tutorial shown here
5. I tried the regionlock away tutorial here in the third method (RegionlockAway doesnt do anything to my phone)
6. I pulled the modem.bin from the TAR file from sammobile of Bell's 4.2.2. But it still doesn't show the hidden menu! It's the MDJ modem but it still doesn't work!
I'm not sure whats wrong with my phone. When I put the Virgin mobile sim card in there it only shows Telus, EXT and Virgin Sim networks available not the whole spectrum which is what is supposed to happen with the 337_aws.qcn file from the AWS tutorial. Then when I flash MDJ modem from bell or the one from this dropbox link: https://www.dropbox.com/s/2m3id2cx4l...37MVLUAMDJ.zip
It still doesn't show my secret menu.
The secret menu I'm trying to access is the *#0011# but if that didn't work I also tried the *#9090# It still doesn't show the secret menu. So what do I do now? Please Help!
Thanks for reading!
Sorry to hear that, but you are in the same situation i was, the phone was probably sim-unlocked by Box Software, like Octopus or Z3X Boxes as i did, the phone won't recognize some sim cards by unknown reasons, there is no fix avaliable for this as i changed imei, tried different NVM from other phone & even replacing sim card reader. i finally sold it & got myself a i337m unlocked via code.
Edit:
forgot to mention, My SIM stopped being recognized when i upgraded it to a newer LTE version
Kind regards.
Have you tried stock NC1 with the included modem? If the device is unlocked, you might have better success with SIM recognition. In my case, my device was not unlocked, so I Odin flashed stock Telus MDJ, then rooted with CF-Auto-Root, unlocked with RegionlockAway (KNOX tripped), and applied the AWS Mod.
Then I flashed stock NC1 with the incl. modem (root gone), and managed to get Rogers LTE and Wind H+ on the Telus device. From there, I OTA updated, and rooted with CF-Auto-Root, flashed TWRP, and worked my way to 5.0.1. Trust me I know how frustrating this can be, but thanks to this forum, there was a solution. Here's what worked for me (link). Good luck.
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Well i live in Mexico, but i own a galaxy s7 edge from tmobile and to try nougat i installed first the Verizon version, and it work well, the only issue was to setting the data configuration, now i use the At&t nougat and everything still even more perfect (the verizon nougat have a lot of little bugs)
bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse
Using a Tmobile S7 Edge going to Verizon won't work cause of a few reasons.
1. TMOBILE S7 and S7 edge are not built for CDMA networks that uses certain bands and network. Along with the security of CDMA networks.
2. There is no band 13 on tmobiles S7 and S7 Edge. Even you were to unlock it.
But going from CDMA to GSM most phones work due most of the hardware and software is already built in the phone.
Sent from my SM-G935T using XDA-Developers Legacy app
I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse
You can flash the stock Tmobile ROM or the U firmware. The only reason I got a new S7 when I jumped from big red was I had a huge scratch on my screen. I was running the U firmware when I went into tmobile and used the girls sim card from her phone to prove I could do it...
Sent from my SM-G935T using XDA Premium HD app
Don't know but I am on T-Mobile and I use alot from Verizon thread no issues so far
OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?
edgtv said:
OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?
Click to expand...
Click to collapse
You need to UNLOCK your phone. It might be a Tmobile phone and running G935U software...but the sim is still locked to T-Mobile. Here is Tmobile unlock page information. you can request unlock in the T-mobile app or by calling T-Mobile....then it should see the Verizon sim and load up just fine once the phone itself is not locked to T-Mobile only sims. https://support.t-mobile.com/docs/DOC-1588
And for anyone else looking at this forum, There is no physical difference in hardware from a SM-G935T phone and a SM-G935U phone. Samsung actually made the hardware the same for all US Variants it is just the software that is different. And not that you would want too but you could load other carriers software on your phone if you wanted too(IE- running Verizon software on a SM-G935T, or ATT or SM-G935U (Stock Samsung Software) The only problem Running SM-G935U is they haven't upgraded the unlocked us phones to 7.0 yet. Where T-Mobile and other carriers already have nougat out.
The SM-G935U software however has all the US and even some Chinese LTE bandwidths enabled, and it also enabled the CDMA bandwidths to be used on the SM-G935 phones...hence why it will work with Verizon, Sprint, and even US Cellular if you can get them to put it on the account.*(I haven't dealt with US Cellular in years and with the new laws on moving phones from carrier to carrier in the US they might not have any issue with Bring your own phone to US Cellular anymore I do not know!)
lubu81 said:
I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
Click to expand...
Click to collapse
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?
cchavez136 said:
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?
Click to expand...
Click to collapse
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.
Mr. Clown said:
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.
Click to expand...
Click to collapse
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)
cchavez136 said:
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)
Click to expand...
Click to collapse
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
Does the phone have to be unlocked before adding these files or does it matter?
cchavez136 said:
Does the phone have to be unlocked before adding these files or does it matter?
Click to expand...
Click to collapse
If you are going to use a verizon sim, you will need to have it unlocked. Firmware flash won't sim unlock/lock the phone.
Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?
unknownsupervillain said:
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?
Click to expand...
Click to collapse
Ok, which ROM did you flash and what version of android you previously had in your phone?
Mr. Clown said:
Ok, which ROM did you flash and what version of android you previously had in your phone?
Click to expand...
Click to collapse
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.
unknownsupervillain said:
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.
Click to expand...
Click to collapse
Great it worked.
I flashed the tracfone rom and everything is working well. I got a software update notification. Should ignore it or is it ok to update?
Bumping the thread...sorry guys. I just jumped ship from Verizon and went to Tmobile today with my S7 Edge along with my wifes S7 Edge. Can I flash her phone with the U firm from TMobile and is the U firmware from tmobile the same U firm that is provided to Verizon? Jist wondering. I've used Odin plenty and understand flash process.
DISCLAMER: I AM NOT A DEVOLPER AND MAY NOT BE ABLE TO HELP YOU ON YOU DEVICE. UNSUCCESSFUL ATTEMPTS TO FLASH FIRMWARE ON THIS DEVICE CAN AND WILL BRICK YOUR PHONE. BACK UP EVERYTHING IN EVRY CONCIEVABLE WAY.
After days of trying to do this with all the outdated guides and miscommunications and edits in post i decided to try and make a streamlined guide to help others.
NOTE: If your are looking for anything else other than a stock bloat free unlocked firmware then look elsewhere.
Also if you are using rev 1 booloader then this will ireversablly upgrade you to rev 2 bootloader not a real problem just a note
Download 3B's patched Odin 3.13 https://drive.google.com/file/d/17wH1YHcGsOCxbDGYDoy9VlnqO_Xi6IOm/view?usp=drivesdk
Download samfirm.exe
https://drive.google.com/file/d/1XdboeTqk8pSZyJQVt-IHVHFfznJ9eOQk/view?usp=drivesdk
Thanks to @zxz0O0
If you can't find your own drivers don't do this
1. Extract B3 Odin
2. Extract and run samfirm.exe
3. Make sure auto is checked use SM-G955u1 as model number and XAA as country code then search. It should find you the absolute latest firmware
Hit download and choose file destination. This can take a while.
4. extract firmware.zip
5. Run 3B's Odin and add file to there respective locations. I.e. Ap file in Ap slot etc. Use the non home CDC
6. The only thing you need ticked in Odin are already set by default
7. Boot phone into download mode power+bixby+volume down while the device is off
8. Read the screen that pops up very carefully and decide to continue at you own risk by pressing volume up
9. Connect phone via USB 2.0 port do not use a USB 3.0 port it will not work
Make sure Odin recognizes device if it doesn't then u have a driver issue
10. Press start and wait patiently
11. Phone will reboot it self setup device and insert sim card. You will probably get a notification say phone not allowed a quick call to the service provider you trying to use is all that's in order here
12. Enjoy your carrier unlocked stock SM-G955u1 on your preferred network
I AM NOT RESPOSIBLE FOR ANYTHING YOU DO TO YOUR OWN DEVICE YOU WERE WARNED.
So this gets rid of all bloatware?
From my knowledge, Verizon does not, and has not ever carrier locked their phones. Seems like a lot of trouble just to debloat.. Am I missing something here?
Any idea why it stucks at "SetupConnection.."
This worked GREAT! My Verizon S8+was working fine on AT&T before I did this, but I was stuck on Android 7.0. So thank you so much for this. There's only one thing that bothers me is in my drop down menu there's a notification that says "Sprint OMADM Checking Device Status." Which really isn't a big deal, it's just annoying. Another thing I worry about is, i'm using it on a GSM network, is it actively searching for a CDMA network at the same time and draining my battery? Any input would be appreciated, and thank you again!
I have a verizon s8 plus does this still work please confirm???
xghostyxjokerx said:
I have a verizon s8 plus does this still work please confirm???
Click to expand...
Click to collapse
The method will be similar just need the proper firmwares for your device
This being quite an old post I was wondering ...
I am currently on G950USQS5CSB1 with CSC XAS/XAA/VZW.
Currently I have no carrier bloat (good), I am on Mint with no issues (good) and I get prompt OTA's I assume for carrier VZW but I lack wifi calling which I would like (bad).
I have downloaded G950U1UES5CSB2 for G950U1
Will this work using the 3B modded Odin as described without having to flash the combination files?
normal and Prince Comsy Odin both failed.
Thanks
edit: Took the dive .... worked great thanks, now on G950U1 and have wifi calling and VoLTE
This is great, minus one thing, it installed facebook on my phone, which I didn't have before and never wanted and it won't let me uninstall it..
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
pakkergirl said:
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
Click to expand...
Click to collapse
Did you by chance boot download mode?
Will this work if I have a v5 bootloader?
kukumaka said:
Will this work if I have a v5 bootloader?
Click to expand...
Click to collapse
Yea. I just switched to Verizon. You should be able to just pop your sim in and it automatically carrier switch. Most of these are multi carrier
But yea I don't know about the firmware program he's offering never used it I get mi e from sammobile.com or update.com
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
fagnerkof said:
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
Click to expand...
Click to collapse
Is it unlocked
TheMadScientist said:
Is it unlocked
Click to expand...
Click to collapse
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
fagnerkof said:
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
Click to expand...
Click to collapse
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
TheMadScientist said:
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
Click to expand...
Click to collapse
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
fagnerkof said:
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
Click to expand...
Click to collapse
Yea not yet. I'm also on 7. We need edl files first. I got the combination rom for the boot img but edl is still missing. I got a few guys looking for it. I typed in the error you gave me and saw a few sites with no box fixes. Normally if you can get to the menu I don't see root being needed. But I may ne wrong since I've never seen this error
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
noidodroid said:
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
Click to expand...
Click to collapse
Your post dont even make sense. The Verizon s8 at the time came sim unlocked. All you had to do was swap the csc. But worked unlocked out of the box. Why would a sprint device be the best setup. All the us s8s are identical. Sounds like you come from LG which is true on devices and versatility. Not Samsung.