Database Users

MetroPCS & T-Mobile LG Leon STABLE Root (WORKS EVERY TIME 100%)

I am making this tutorial as I have had multiple versions of the LG LTE Leon and have used many firmware versions. I have created a stable method that has the least issues as I have had trouble with the latest firmware (MS34510f) disabling my root privileges. I have created a MEGA account specifically for all of the files necessary to complete this operation and have your device run smoothly. So, please follow my instructions exactly as stated and you should not have any issues. THIS PROCESS WILL REMOVE ALL DATA NOT SYNCED, DO READ BELOW NOTES IT IS VERY BENEFICIAL
Important Notes:
+This process will wipe all data that is not synced, it is important to ensure that no newer LG process are still on the device. Some might argue to leave data, to that I say good luck keeping your root and tethering without the device becoming suspiciously unstable.
+ I am not GUARANTEEING this will work on every model, but I have had an extremely high success rate with all Leon versions.
+ In this tutorial the process in which I remove Kingroot and replace it with SuperSu is for system stability. I find that most root functions I use seem to not work properly. (Wifi Tether Router and many others). So, I do recommend doing so.
+After the new OS is installed a MetroPCS splash screen will appear even if you do have T-Mobile. DO NOT BE ALARMED this firmware will not limit any functionality you had before, it will even help with tethering functionality.
Tutorial:
Let's Begin.
1. Download the link posted to obtain required files for this tutorial
Link: https://mega.nz/#F!PM4CQRqb!92kgIOnD0ZBY-8HVbtTwGQ
2. Open up LGFlashTool2014.exe
Begin by copying settings posted below, then click "normal flash"
3. Next click the "START" button
4. At this time, I recommend you verify all sync settings are to your liking and that all personal info needed is backed up
a. You have the option to throw all of your personal documents/pictures onto your SD card and removing it appropriately
(Go to: Settings - Storage - [scroll down to] Unmount SD card)
b. Next, navigate to Settings -Backup & reset [leave options default; both checked off] - Factory data reset - reset phone
c. Once reset it will most likely reboot, wipe, and then back to a OS. Now, you will Power Off entirely (make sure it is not plugged in so it will not go to charging mode)
d. Here is where we will hold down the Volume Up button with the phone unplugged from your PC. Then you must plug the USB into your phone.
e. A black screen with white text should post onto your screen, here we will continue to step 6
note: If this screen does not appear please power off and retry step d.
6. Next, follow the posted settings. Make sure to click the "Clear phone Software update Registry" button Then click "OK"
7. A new screen will arrive, and should begin the firmware download process. At this time it will take a few minute to load and should reboot to a fresh OS.
8. With the new OS in place, you can either follow the setup tutorial now or skip through for a later setup.
note: you can now insert your SD card
9. In the tools folder of the folder you downloaded copy the "mrw" folder to the Main Storage folder of your phone
10. Now copy the Kingroot apk to your downloads folder located on the main storage.
11. Go to Settings - About Phone - Software Info
At this time click the build number box a few times until it says you are a developer
12. Hit back until you are at the Setting menu, click on Developer options and check off "Stay Awake" and "Enable OEM Unlock" as well as "USB Debugging"
13. You may now run Kingroot, if it does not install root the first time it should flawlessly install the next.
14. After root is obtained, please go to your home screen and click the "Google Search" widget. Press Update Google Services and let it run. After that has been updated search for terminal emulator and install.
note: If the Play Store is acting fishy and force closing while typing in the search bar do not fret it will be fixed after reboot in further instruction
as an allternative use the jackpal.androidterm-1.0.70-71-minAPI4.apk provided in the "tools" folder
15. Open terminal and in a new window type: Su
16. Allow root usage and at this time type: sh /storage/emulated/0/mrw/root.sh
17. It will run with a few failed messages do not worry it should open SuperSu momentarily
18. Once SuperSu opens up allow it to update binaries using the "NORMAL" option but DO NOT REBOOT YET
19. At this time either download TWRP Manager from the play store or alternatively use the com.jmz.soft.twrpmanager-7.5.1.3-82-minAPI11.apk provided in the tools folder
20. Install and open TWRP Manager. Once opened click on device name and scroll until you see "LG Leon LTE (c50)"
a. Click on Recovery Version to Install and select "twrp-2.8.7.0-c50.img"
b. next click "Install Recovery" and if prompted for verification of install path and for install version select "YES" & "NORMAL"
21. After the TWRP setup is complete it may prompt you to reboot, if not click the arrow in the top left of the TWRP Manager screen and scroll down to "Reboot" and select "Reboot device"
22. After Reboot click TWRP Manager and verify a SuperSu prompt comes up if it hasn't already before the boot
At this point the device should be running smoothly. From here I prefer to do the following steps.
My Personal Setup after new install:
+Personally I like to install use a Root Uninstaller (I use 3C Toolbox Pro) and Uninstall and Backup all MetroPCS BloatWare including the Metro Browser.
+I also access the Hidden Menu by using the Dialer and Dial "2776348*#*"
- I scroll down to ApnUnlock and click to "Unlock APN"
- Then I navigate to Settings -Tethering & networks - Mobile Networks (I check off roaming data) - Access point names
--I then select the top APN and edit APN Type to: default,supl,mms,dun
---I click save from the top right selection, then turn on and off airplane mode
+If you are and Xposed user download "xposed-v79-sdk22-arm.zip","xposed-uninstaller-20150831-arm.zip", and "XposedInstaller_3.0_alpha4.apk" from: http://forum.xda-developers.com/showthread.php?t=3034811
-install the Xposed Installer, then Go to TWRP Manager, use reboot to recovery and from there click install and navigate to the "xposed-v79-sdk22-arm.zip" and install and reboot, it will reboot with a installing screen before your home screen, takes 5 minutes.
+I also use this AMAZING app "Wifi Tether Router", it is the only tethering app I use that works consistently (if you have an unlimited data plan). I get 30mbps up and down, playing many multiplayer games off my PC and PS4 averaging ping as low as 30 ! Setting I use for our device are in a post I created here: http://forum.xda-developers.com/leon/help/unlimited-metropcs-t-mobile-tether-t3290180
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Special Thanks to:
MrW0lf from www.W0lfdroid.com for the Kingroot to SuperSU scrip
Numerous users on the XDA forums I pieced all of this information with
Fabio Grasso for making the amazing Wifi Tether Router
Team Win for being creating an awesome utility that has saved me from numerous bricks creating a stable method
Xposed and the creators of awesome additions such as Lolistat, Lucky Patcher, Max Lock, and SNAPPREFS
Any feedback? Did I do Okay? Questions? Let me know!

Mega link down
The mega link isn't working. Please fix it.

A Noobs Guide to Verizon Galaxy Note 4 Hardware Repair,Root,Bootloader,Twrp,ROM's

A Noobs guide to Galaxy Note 4 Verizon Motherboard Hardware repair and replacement
and Other Samsung Galaxy Note 4 repair ( Att, Tmobile etc ) starting in thread 2 ( user input welcome ) ​
My Overheat Heat and flash problem issues leading to
OEM Motherboard replacement and acquiring ROOT again​
OP Note : read the whole guide or for that matter any OP​
Thanks to many XDA-Developers forums, if you are not quoted or mentioned here I will add you !!
Device : Samsung Galaxy Note 4 Verizon SM-910V this OP ONLY !!!
Code:
[COLOR=Red][B]Your warranty is now void.[/B][/COLOR]
*most likely you don't have a warranty because you broke it, ROM'd it, its old and past warranty anyway !**
So, There is no warranty anyway, not even if you did anything in this thread to it
We are not responsible for bricked devices, dead SD cards,
thermonuclear war, or your getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this guide
before flashing it! (thanks @hsbadr)
YOU are choosing to make these modifications, and if
you point the finger at anyone for messing up your device, we will laugh at you
Symptoms : ROMs not flashing/installing , crashing, High heat, low battery life on new battery hardware note working specifically fingerprint.
Problems : digging through many forums 2 years later to root and unlock the bootloader, it took DAYS
Solution: keep track of my progress and make a useful step by step NOOB guide for Everything !
Section 1: Repairs
Then the rest of the sections are for Rooting, Installing TWRP custom recovery, fixing bootloader , and installing ROMS
Section 2: Flashing via ODIN and the correct rootable OEM rom 5.1.1 on a windows PC
section 2a: Flashing via Heimdall on a Linux device --need comments
Section 3: Achieve temporary root to install bootloader fix
Section 4: Use of ADB to (windows and linux ) to copy over bootloader fix
Section 5: install TWRP custom recovery and your first rom
Section 1: Repairs
If you have to replace the motherboard, and you have any other futzy component, might as well order it at this point, your going through pretty much the same process. I am only doing the motherboard, but the cameras and USB board are right there as well on this repair
I have been running a rooted Verizon Galaxy note 4 since Cynogenmod crashed and switched to Lineageos 14 and then 15.
Here is the forum
https://forum.xda-developers.com/no...eo-8-1-0-unofficial-lineage-15-1-rom-t3760969​
After several suggestions and searches, many users hinted I may be getting a Bad internal memory,
which refuses to write anymore.
So I had to go to Walmart and buy a LG Straight talk phone to use as my daily driver,
Then I ordered a new motherboard from China, 29.00 on Aliexpress.
See OP thread #2 below!! It was not fun searching for it, but I saved $20 to $40 from buying on ebay
What I bought may not be available from this seller, but here is the link. Use a desktop browser, it will show "suggested" other devices...
Code:
[URL]https://www.aliexpress.com/item/with-Android-System-Original-unlocked-for-Samsung-Galaxy-Note-4-N910V-Motherboard-Good-Working-Free-Shipping/32802513232.html?spm=a2g0s.9042311.0.0.66e04c4dpohrQm[/URL]
When I received it , it was time to look for a repair procedure on YouTube.
Hardware needed: thin shim and 00 size phillips, AND a blank cheap SD card you don't mind losing. It may be unusable after we are done
Cell Phone repair tool kit really helps save your fingernails !
Complete note 4 teardown video:
Code:
[media=youtube]ZND9Q73wjr8[/media]
Just the Motherboard video
Code:
[media=youtube]5KpT755hNpM[/media]
In the second video, you can see the phone booting up as a test to see if you have all the connections correct.
Because it came from china, its a good idea to setup your user and
download the app CPUz before you put all the screws back in,
and check to see if you have a real or fake chipset.
Yaayyyy mine was real . Thanks Aliexpress.
Button it up and do a factory reset (it booted up set up as a no user) so I wanted a fresh install oem with my user.
Section 2: Installing the Correct rootable OEM rom so we can install Anything else.
FIRST check to see if you have the emmc brickbug or you will BRICK it !!
1. Google play store install eMMC Brickbug
If your long number starts with 15xxxxxxxxxxxxxxxxx, YOU are Golden ! if not STOP, get another board ! or you are going to waste time , and get another board !
The Galaxy Note 4 Verizon had a special custom locked bootloader installed after the 4.4.4 release to 5.0.1 and made it very difficult to get
root access to your device.
I saw the notice
DON'T UPDATE YOUR BOOTLOADER TO ANYTHING AFTER THE LATEST BUILD AS OF 4/19/16
warning about a week to late. So I finished out my 2 year contract and watched the forums.
Seriously noobs, don't update your new motherboard ...
The rom pre-installed on my replacement motherboard was already setup booted to a running 5.0.1 oem rom, I could not root it.. with any method I remember downgrading my 6.x.x to 5.1.1 in one of the many forums listed here at XDA
This one was the one I used back then, and It turned out that is where I started..
Only a Verizon Samsung Galaxy note 4 Developer Edition has the ability to install custom roms, and most likely the motherboard you bought or have is NOT a developer edition
IF you have a eMMC that starts with 15 we can reprogram it a developer edition
Thanks to @hsbadr
Here are most of the downloads we need:
Code:
[URL]https://forum.xda-developers.com/devdb/project/?id=15720#downloads[/URL]
2. Download Odin, Download TWRP, and Samsung_unlock_n4-fix
3. On your windows PC, create a folder c:/Odin and extract the Odin zip file there, and copy the TWRP image there
4. Download the following OEM root able ROM to your c:/Odin folder
Code:
[URL]https://forum.xda-developers.com/devdb/project/dl/?id=18880[/URL]
5. Plug your phone into a USB port on your Windows PC
6. Install the necessary drivers if they don't automatically install from Samsung
Code:
[URL]https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows[/URL]
7. Set up your phone for flashing ROM and communicating
Settings - Security - Unknown sources- : check allow
settings - system -about phone - build number : click several times until you activate developer options
settings - system -about phone - developer options : Android Debugging : enable android debug bridge
settings - security - reactivation lock : Turn OFF or you will brick your device ( may vary where this is at . Important to turn off )
Power Off phone
Enter Download Mode - press and hold in this order <down arrow> <home> <power> until screen comes on. release buttons.
press up arrow to enter download mode
8. Open windows explorer and go to your c:/Odin folder. You should have an odin exe file, and the twrp file, and the large rom file.
a. right click odin exe and open as administrator
b. check to see if your connected to your phone. you should see a blue box in upper left with a com under it.
If you unplug your phone, you should hear the disconnect notice and the com and blue bar will go off, and when you connect, the com and blue bar and reconnect noise should appear.
9. click the AP button box, select the ROM file that you downloaded above.
NOTE : this ROM will disable WIFI so you wont be able to use the play store unless you have cellular connection.
you will have to transfer other files via usb cable !
Click start, do not unplug! until it stops.
10. Device will reboot. Remove cable, and battery before boot completes
11. Enter recovery mode . Press in order ,<volume up><home><power>
wait for the little android dude to do his thing, then there will be a menu. select factory reset, and reset and let it reboot
Set up minimal user or as a new phone with no user and check the settings in step 7
Set up your phone for flashing roms and communicating
Settings - Security - Unknown sources- : check allow
settings - system -about phone - build number : click several times until you activate developer options
settings - system -about phone - developer options : Android Debugging : enable android debug bridge
settings - security - reactivation lock : Turn OFF or you will brick your device ( may vary where this is at . Important to turn off )
Yayy, you now have a rootable device
Section 3 Achieve temporary root to install bootloader fix
In my try to obtain temporary root, I tried every method in all the forums ( go ahead and look and try )
The only 2 programs that reported to work is Kingroot, and Kingoroot. These are APK's that are NOT in the play store
you will have to download them and install them as unknown sources. I was only able to install kingroot . Kingoroot apk would not install
in both my 5.0.1 original on my motherboard, as well as what we just installed 5.1.1 I was unsucessful at obtaining root with these programs
Then I remembered Kingoroot has a windows version that installs on the PC <dangerous dont install yet>
On your PC you will need AVG antivirus to catch the malware ( other antivirus may work but this is what I had ) my PC is windows 7 ultimate
Advanced Users only :Recommend running a virtual machine with windows so as to keep your PC completely malware free. just delete the VM after this process !
This section you will need on your Note 4 from the Play Store : root checker
You will need a throw away SD card
You will need read through section 4 and 5 and get all files and programs there ready to install use and or transfer
0.5 update your AVG
1. With AVG installed on my PC, and my phone connected as a mtp with usb I downloaded and installed Kingoroot for windows.
https://www.kingoapp.com/
NOTE after not being able to install forum recommended kingoroot apk's i dint want wast time install the newest kingoroot apk from the website. Maybe it will work for you. If you do get kingoroot apk to work on your Note 4 let me know.
2. In the install process for kingoroot windows version AVG will quarantine a file.
there will be a couple popups .. close them
when its installed it will open and start talking to your phone.
3. press the root button.
It will take 30 sec to a minute to install some files on your phone and achieve root, there will be a new floating toolbar on the phone. root will disappear after a reboot, but not the resident programs this root is pretty stable, but i was not able to install SuperSUME (paid version ) as recommended in a XDA guide to obtain permanent root for this 5.1.1 rom. If your successful with super SUme with this let me know.
4. Open root checker to verify ! yayy.
5. Cleanup instructions when finished with this guide below
Section 4: Use of ADB to (windows and Linux ) to copy over bootloader fix
1. Your Note4 phone should be running with root, make sure phone is connected
Explanation : ADB is a Google provided tool for the android platform. It communicates with your phones operating system , transfers files , and actuates programs remotely in the background. totally necessary for development of ROM's, TWRP, and programs for every android device
You may or may not know that your android device is running a Linux kernel, with some Linux programs, with custom folders and custom files and settings, and the touch screen is the GUI graphical user interface touch input.
ADB is a command line user interface, when you turned this on in Developer settings, the kernel is listening constantly on the USB com port and some times on the WiFi com port for commands. if you don't need it turn it off, it could be a security hole, but we need it on.
It works great on windows, mac, or Linux varieties
2. Install on your computer
Code:
[URL]https://developer.android.com/studio/releases/platform-tools[/URL]
If you have linux, your distribution may have a package you can install from your distribution. Then it will be in your path as a command
3. Windows users , extract or install into c:/ADB and add that to your PATH variable if you want to use it all the time as a command
4. Open a command prompt window (search command or cmd , right click open as administrator)
5. If you have ADB folder in your path or are running Linux change directories to the folder where you downloaded the Samsung n4 fix file
6. You should still have root
type
Code:
adb devices
The ADB daemon ( little server program ) will start and return some information.
your phone will have a popup screen and should ask for permission, click allow
again type
Code:
adb devices
7. You should see something like this
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device.
If you see something listed like the above adb is working. Now on to the next command to move the Samsung_unlock_n4-fix to the phone.
type dir ( or ls -al for Linux users ) to verify Samsung_unlock_n4-fix is in your directory
8. Send Unlocker to Phone with adb
Type or copy and paste the following command:
Code:
adb push samsung_unlock_n4-fix /data/local/tmp/
You should see successful output .
If you don't, check your PATH, check if your in the right folder, or make sure samsung_unlock_n4-fix is in your adb folder
9. Activate the unlocker. This requires root and a reboot. After the reboot you have to go and reactivate root in Section 3.3 above
type the following
Code:
adb shell
Congratulations you are now looking at the linux command line interface on your phone . the $ prompt means you are in the shell
10. activate superuser mode ( kind of like administrator in windows but more powerful )
type
Code:
su
then press enter key
YOU SHOUD NOW SEE a # prompt
This means you succeed in root. If you dont see a # you missed a step above somewhere , or your root was unstable and took too long to get to this point,that is why I said read thru this section and get ready..
Ok at this point we have the file we needed transfered, we have root, now we need to upgrade the permissions on the file so #root level of the operating system can use it !
The next command does all that then executes the command to upgrade your phone to developer edition !
Copy and paste the following command series and press enter.the && joins each command
Code:
cd /data/local/tmp/ && chmod 777 samsung_unlock_n4-fix && chown root.root samsung_unlock_n4-fix && ./samsung_unlock_n4-fix
The device will reboot and flash the developer code.
You should see some sort of progress in the window.
When done ,unplug the cable and pull the battery to shut down phone.
11. Make sure you have a cheap throwaway SD card installed !
One More Time to unlock the boot loader !! section 3 and 4 short version
Put the battery and cable back in and turn the phone back on and make sure its plugged in your PC.
Now repeat the kingoroot PC to gain temp root
open a command prompt or shell
type or copy paste the following to verify its connected
Code:
adb devices
transfer the fix
Code:
adb push samsung_unlock_n4-fix /data/local/tmp/ && a
open the shell on your phone
Code:
adb shell
gain super user rights
Code:
su
unlock the boot loader
same command series
Code:
cd /data/local/tmp/ && chmod 777 samsung_unlock_n4-fix && chown root.root samsung_unlock_n4-fix && ./samsung_unlock_n4-fix
You will see your phone do a series of outputs then reboot. when it reboots, disconnect the cable.
If this step is sucessful your phone will keep rebooting. This is NORMAL . after the first or second reboot, pull the battery and pull the sd card, and set the sdcard aside. It will need to be thrown out or repartititioned to be usable. or you can keep it as a memento on your charm bracelet.
Your bootloader is NOW UNLOCKED . keep phone off until you read the next section
Section 5a: install TWRP custom recovery
Currently right now you have 5.1.1 installed with some Chinese malware on your phone and PC,
A custom developer edition and an unlocked boot loader. Lets fix them all.
Turn on phone download mode . <down volume><home><power> then volume up to enter download mode
Open Odin again ( see above )
Connect phone ( look for com and blue bar )
Select AP button, and browse to TWRP file
Press start. when finished phone will restart.
Don't let it boot all the way back up! , pull battery, and install good SD card, and if you read this section you downloaded what you needed for a new ROM onto your sdcard
Turn off the automatic rebooting in the custom tab, DO NOT select the PIT tab
Press start
Once it finishes it will say Success or FAILED
IF it says FAILED start the whole process over! you didn't unlock the bootloader !
If success, Power off the phone with the pull battery method and disconnect your cable
Press and hold these buttons immediately to enter TWRP ,
<volume up> <home> <power>.
Swipe to allow changes in TWRP.
Select backup , change to SD card, You can also plug in a memory device into the USB port. If it sees it you will be able to use that for backup space
BACKUP everything . You now have a custom recovery installed, a unlocked bootloader, and a rootable ROM Backed UP !
If you feel you want to do this all over again if you flash the OEM Samsung ROM via Odin by accident like I did, ha ha skip the next steps
Select the backup button, select all the partitions, select the source, where you want to store it.
Name the backup rooted-backup-everything-5.1.1
Select start and go make some coffee or a sandwich. its about 4 gigabytes compression, so it may take about 5 to 10 minutes
Clean up -
uninstall windows kingoroot PC and do a virus check
check for hidden folders and registry entries
Section 5b. Install your first ROM
Cleanup : After your backup WIPE your phone twice
THIS IS TO guarantee, no Kingoroot or kingroot stuff is in the phone !!!
WIPE IT TWICE !!!
Some guides (listed below ) say to adb sideload over a root file , then install an older rom. I haven tried this. Let me know if you did and are successful.
Whatever ROM you use, please post a success story in the reply's. I am interested in how you all do.
I have tried every note 4 ROM and this is the most succesful for me and most stable
I have been using this ROM for a while, and the lineageos 14 version too
Code:
[URL]https://forum.xda-developers.com/note-4/snapdragon-dev/oreo-8-1-0-unofficial-lineage-15-1-rom-t3760969[/URL]
In most all ROMS, you can update the bootloader (TWRP) by TWRP app if rooted
you can update the modem ( a partition that contains original Samsung code to run the cell and wireless ) via ODIN
Roms and patches and other goodies can be installed via TWRP by downloading to your device or transfering them to your sd card
Oem ROMS must be installed via ODIN, and will WIPE all you just accomplished. so unless your selling your device, or giving it to grandma DONT.
If you copied the rom ( usually a zip file ) and the necessary files, and have upgraded your bootloader and modem to the newest,
Now install your ROM, and after your initial setup, come back to TWRP and do a full backup !
every time you try a new rom, and get it set up, do a backup. that way you can switch and test to your hearts desire till you run out of SD memory.
The cool thing is you can backup to an external memory device ! more room !
Follow the directions in the OP of your ROM to install. Enjoy
All the above info was gleaned from the following pages
Thanks to @beaups for discovering exploit !!!
Thanks to @hsbadr [HOWTO] Bootloader Unlock and Upgrade to Marshmallow [N910VVRU2CQL1]
Code:
[URL]https://forum.xda-developers.com/note-4-verizon/development/howto-bootloader-unlock-upgrade-to-t3398144[/URL]
and his files
Code:
[URL]https://forum.xda-developers.com/devdb/project/?id=15720#downloads[/URL]
Thanks to @ryanbg [Official] Note 4 Verizon Bootloader Unlock
Code:
[URL]https://forum.xda-developers.com/note-4-verizon/general/note-4-verizon-bootloader-unlock-t3358913[/URL]
and @urgodfather
Code:
[URL]https://forum.xda-developers.com/showpost.php?p=66381707&postcount=342[/URL]
Thanks to @chriskader [HOWTO] Converting your Retail Note 4 to a Developer Edition Note 4
and @Mickey387 for discovering how to compile the note 4 32bit hardware drivers into Oreo !!
and @_mone @ripee
for maintaining and working hard on
[ROM][UNOFFICIAL][8.1.0] LineageOS 15.1 [trlte][trlteduos]
Code:
[URL]https://forum.xda-developers.com/note-4/snapdragon-dev/oreo-8-1-0-unofficial-lineage-15-1-rom-t3760969[/URL]
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
some of this was also posted on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked

Update:
Looking for a motherboard for a 910 that's not a v?
Thanks to user @maralexbar I need to update some info
Method 1 use eBay. Find your correct motherboard easily.
Method 2. Save some money use Ali Express ( China )
If you use Ali, and don't find your motherboard on a direct search, keep digging.
I forgot to mention this.
Looking for my Verizon motherboard, I found lots of parts like the USB internal connector etc. But no mobo. I had to go thru the store listing of the seller of the USB connector to find a vendor that had a mobo. Then I tried comparing different vendors. So do some digging. There is a billion people on Ali express selling stuff. Don't give up.
Plus Ali wants happy international buyers. So if you get a bogus item, you get your money back.

reserved #2
reserved #2

reserved #3
Reserved #3

reserved #4
Reserved #4

Thank you very much for this!!! The phone is running beautifully, smooth and fast. I ended up installing this ROM:
https://forum.xda-developers.com/note-4/snapdragon-dev/rom-resurrection-remix-6-0-0-t3768963
BJ

b1ggjoe said:
Thank you very much for this!!! The phone is running beautifully, smooth and fast. I ended up installing this ROM:
https://forum.xda-developers.com/note-4/snapdragon-dev/rom-resurrection-remix-6-0-0-t3768963
BJ
Click to expand...
Click to collapse
Your more than welcome

Announcement:
Thanks to @ripee
The lineage-17.1 thread is up!
[ROM][UNOFFICIAL][10] LineageOS 17.1 [tblte][trlte][trlteduos]
If you don't mind not having a working fingerprint sensor, or audio through the headphone jack, then Q is stable enough for daily use. As always when coming from an older rom version, it is highly recommended not to waste your time dirty flashing and just clean flash.
Q is still a work in progress, so I will still be releasing Pie builds, though maybe not as often. As in years past, once the Q bugs have been fixed up to the current Pie level, I will post about when my last Pie build will be. I will upload it to the Downloads tab located at the top of each page of this thread, and link it in the OP.

[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 Stock to Android 13

[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 Stock to Android 13
[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 LTE/deb or Wi-Fi-only/flo to Android 13 / LineageOS 20 with Netflix/Disney+ working
This detailed step-by-step guide helps you transform your Google Nexus 7 (4G or wifi) with Android 6 to a fresher one with Android 13.
### I'll make a few notes using this style: PLEASE READ THEM.
Before going further, make sure you have the correct model.
Go to Settings > About tablet > Model number: Nexus 7
And on tablet's back cover: Nexus is written vertically (horizontally on 2012 model)
### See here if not clear: https://android.stackexchange.com/questions/58273/how-to-distinguish-nexus-7-2012-and-nexus-7-2013
If you have a SIM card slot on the side, it is a LTE model (codename deb), if not, Wi-Fi only alias flo.
Make sure you have latest official updates.
Connect tab to Wi-Fi network.
Go to Settings > About tablet > System updates. Download if update is available.
### WARNING. I'm not sure banking apps will work. Office Lens and Adobe Scan don't work.
### See all my tutorials at https://github.com/djibe/Android-tutorials
### Buy me a coffee: https://ko-fi.com/djibe
CHANGELOG
v10. BitGApps v2, Lanchon repit cited
v9. Android 13, TWRP 3.7 (both by @followmsi)
v8. Back to BitGApps
v7. Hack GApps for Android 12.1/12L (thx to @JamesTanner)
v6. Android 12.1/LOS 19.1
v5. Stick to 12/19 (not 12L/19.1) to wait for compatible BitGApps
v4. Move to Android 12, improve fastboot errors, update Magisk to 24.3 + Netflix access
v3. Move to BitGApps, TWRP 3.6 by @followmsi, repartition script 1380/20 by @k23m
v2. Netflix and Disney+ with Magisk 23 + updated pack, improve readability
v1. Initial release
1) DOWNLOAD
- djibe Nexus 7 2013 pack: https://drive.google.com/file/d/1gPo8YGO-5b6mqugCDyi7T3k94uecwbfZ/view?usp=sharing
(contains USB drivers r13 + fastboot & adb + TWRP recovery 3.7.0_9-0 flo & deb by followmsi + Magisk root + repartition zip sysrepart_1380_20 by @k23m).
### Use Incognito web browser mode if needed to download pack.
Unzip pack on Windows desktop.
For both LTE model/deb & Wi-Fi model re-partitionned/flox
- ROM LineageOS 20 Unofficial by @followmsi (Android 13): https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-20-0.3569067/
Download latest build: See top link in thread above
### You may also want LineageOS 18.1 Official (Android 11): https://download.lineageos.org/flox (download according BitGApps version)
+ BitGApps ARM 13 v2+ CORE: https://github.com/BiTGApps/BiTGApps-Release/releases/
+ Tablet must be fully charged.
2) INSTALL WINDOWS DRIVERS AND BACKUP
Go to the folder you unzipped earlier.
navigate to usb_driver_r13-windows > usb_driver.
Right click on android_winusb.inf and select Install. Confirm with OK.
Restart Windows.
Make sure Google/provider account is synchronized.
Backup photos, documents, contacts before going any further (ex: use the backupyourmobile app).
Connect tab to PC and retrieve data.
3) UNLOCK BOOTLOADER OF GOOGLE NEXUS 7 2013
In Android, go to Settings > About tablet.
Tap 7 times on "Build number", a notification confirms Developer menu is unlocked.
Go to Settings > Developer options and switch USB debugging ON.
Go to my /djibe folder you unziped earlier. In Windows address bar (ie E:\root\Google Nexus 7 2013\djibe\flash), type cmd and hit Enter
to open a Windows Command.
Connect tablet to PC.
Enter command
Code:
adb devices
Command starts adb and returns
Code:
077955f1 unauthorized
ADB (Android Debug Bridge) has started but tab is waiting for authorization.
On tablet, authorize adb commands from Allow USB debugging dialog: tap on OK.
Then enter command
Code:
adb reboot bootloader
Tab restarts and displays a droid, lowest message is: LOCK STATE - locked
Enter command
Code:
fastboot oem unlock
Using Volume+, select Yes - Unlock bootloader, confirm by pressing Power.
Lowest message is now: LOCK STATE - unlocked
### Unable to run fastboot commands: < waiting for device > ? Go to Windows Device Manager
### While in ADB, driver for Android Device should be named Android Composite ADB Interface. In Fastboot: Android Bootloader Interface
### Click on View > Display hidden devices, right click on Nexus 7 > Uninstall. Reinstall drivers. No success ? Try from another computer
Use Volume keys to select Start and Power to confirm.
Tablet is unlocked.
Configure Android quickly, reactivate Developer options and USB debugging.
Then restart tablet to bootloader using once again
Code:
adb reboot bootloader
4) FLASH TWRP 3.7 RECOVERY
Tablet displays the droid logo.
From Windows command, enter:
Code:
fastboot flash recovery twrp-3.7.0_9-0-flo_followmsi.img
### Or for LTE model:
Code:
fastboot flash recovery twrp-3.7.0_9-0-deb_followmsi.img
Command returns Finished. Total time: 0.995s
Back to tablet, use Volume keys to select Recovery mode, confirm with Power.
### You may experience lagginess within the Recovery.
Welcome to TWRP recovery.
Check Never show this screen during boot again and Swip to Allow Modifications.
Go straight to Backup > select Boot, System, Data partitions.
Swipe to Backup and wait during backup.
Back to home screen > Mount (tablet still connected to PC).
You can access tablet's storage folders from Windows Explorer if Data partition is checked and bottom right button show Disable MTP (within TWRP Mount menu).
From Windows Explorer, navigate to Nexus 7 > Internal Storage.
Copy TWRP folder and paste it somewhere safe on PC.
This is a perfect backup in case of crash.
5) FORMAT PARTITIONS
On tablet, now go to Wipe > Format data.
Type yes and confirm with bottom right check icon.
Now go to Wipe > Advanced Wipe. Select Dalvik / ART Cache, System, Data, Internal Storage, Cache and Swipe to Wipe.
We cannot flash on wiped partitions. Go to Reboot > Recovery and Swipe to Reboot.
Back to Mount menu.
From Windows Explorer, now copy sysrepart_1380_20.zip on Internal Storage.
Disconnect tab.
Back to tablet, go to Install > tap on sysrepart_1380_20.zip and Swipe to flash.
Go to Reboot > Recovery and Swipe to Reboot.
### Repartitioned Wi-Fi model is called flox (instead of flo)
### If you lack space, you should go there: https://forum.xda-developers.com/t/tool-unofficial-port-repit-for-nexus-7-2013-deb-flo.4237183/
6) FLASH ANDROID + GAPPS (+ MAGISK)
On restart, check Never show this screen during boot again and Swipe to Allow Modifications.
Connect tab to PC.
Back to Mount menu.
Copy ROM + GAPPS (+ Magisk) to Internal storage with Windows Explorer.
Go to TWRP Home > Install.
Select lineage-*.zip,
then Add more zips: bitgapps*.zip and Swipe to Install
(for root, needed for Netflix : and Add More Zips, then Magisk.zip)
### If you get Error 70, don't be scared. Tablet doesn't know the System partition was increased.
### Go to Wipe > Advanced Wipe > Resize File System > Swipe to Resize and flash GApps.
(Repeat Reboot to Recovery with Magisk v25.2 if you need root).
Android 13 is installed !
When done message prompts, tap on Wipe Cache/Dalvik and Swipe to Wipe.
Disconnect tab from PC.
Then Reboot System.
Let the tab start (a few minutes).
7) ROOT WITH MAGISK (OPTIONAL)
### Only if you flashed Magisk via TWRP recovery
Do not connect to Android account.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
Open Files app > Install Magisk.apk.
Then in Magisk goto Settings > Hide magisk app and give it a name, switch Zygisk option ON.
Go to Modules Tab > Install from Storage: MagiskHidePropsConfig and safetynet.
Go to Developer options to disable Android debugging (ADB).
Reboot phone.
You can use yasnac app to check Safetynet passes.
Then with Files App: install netflix and disney+ if needed.
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Developer options
Settings > About tablet.
Tap 7 times on build number.
Back to Settings > Developer options
Select USB Configuration > set MTP
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x (or disabled)
Tablet not seen by Windows or Can't access tablet from Windows Explorer ?
Activate Developer options.
Go to Settings > System > Developer options > Default USB configuration > File transfer
11) NETFLIX AND DISNEY+
You may try both apps without more manipulations.
If they don't work, go back to recovery and flash Magisk.
That's it.
Enjoy ;-)
Thanks: @followmsi, @k23m, @nbehary, @DevSwift1, @flex1911, @yattodettaman, @emmett.tsai, TopJohnWu, TWRP team, LineageOS team, BitGApps team
------------------------------------------------------------------------------------------
BOOT TO RECOVERY
Hold Power + Volume- until Droid logo appears and release buttons, this is Bootloader.
Press Volume- twice to show Recovery mode and confirm with Power

Amazing guide. Start to finish in just under an hour. Zero issues.

DefconZero said:
Amazing guide. Start to finish in just under an hour. Zero issues.
Click to expand...
Click to collapse
Hi, glad you like it !
This tab is awesome.

djibe89 said:
Hi, glad you like it !
This tab is awesome.
Click to expand...
Click to collapse
Indeed!
Forgot to add - THANKS to you and all the contributors you mentioned for all the support in keeping this device and the android community alive!

Easy guide, everything seems working just fine except gps not working how do I fix that?
Thanks to you and all the contributors you mentioned for all the support in keeping this device alive

After many unsuccessful attempts (Win64, Linux) I followed these instructions to the letter and it was successful. Thanks!

amem said:
Easy guide, everything seems working just fine except gps not working how do I fix that?
Thanks to you and all the contributors you mentioned for all the support in keeping this device alive
Click to expand...
Click to collapse
Hi,
I don't remember to have GPS failing.
I'm sorry I can't help on this.
I'll try to buy a new tab one day to test it again.

djibe89 said:
Hi,
I don't remember to have GPS failing.
I'm sorry I can't help on this.
I'll try to buy a new tab one day to test it again.
Click to expand...
Click to collapse
Hi
Thanks for taking the time to read my post after reboot It is working fine thanks again

Finally there is a guide which I can refer to as a newbie. Thank you so much!
Not sure why can't boot to recovery mode though...but resolved by manual long hold vol up + power button

andycyc said:
Finally there is a guide which I can refer to as a newbie. Thank you so much!
Not sure why can't boot to recovery mode though...but resolved by manual long hold vol up + power button
Click to expand...
Click to collapse
Hi,
thx for your post.
I'm glad it's useful.

Hi, been running my Nexus 7 rooted and on custom Android 6 based ROM and kernal for probably the last 6 years. Admittedly used very little, but still runs like a champ, if not a little sluggish. So I just decided to check back in to XDA and so happy to find this and try it out. However, GApps link not working for me. "File requested does not exist" Any possibility to fix link?
Thanks very much to OP!!
Edit: wow, pardon the banner, haven't been on XDA like I said for maybe six years, or more!
Edit 2: I believe I found the same GApps from another link djibe89 posted in LG G3 tutorial for the same process. Here:
[GUIDE/TUTORIAL/HOWTO] LG G3 D855 Stock to Android 11
[GUIDE/TUTORIAL/HOWTO] LG G3 D855 Stock to Android 11 [GUIDE/TUTORIAL/HOWTO] LG G3 LG-D855 (Unlocked/Europe) Stock to Android 11 R/LineageOS 18.1 with all files included, Netflix and Disney+ working This detailed step-by-step guide helps you...
forum.xda-developers.com

mookdawg7 said:
Hi, been running my Nexus 7 rooted and on custom Android 6 based ROM and kernal for probably the last 6 years. Admittedly used very little, but still runs like a champ, if not a little sluggish. So I just decided to check back in to XDA and so happy to find this and try it out. However, GApps link not working for me. "File requested does not exist" Any possibility to fix link?
Thanks very much to OP!!
Edit: wow, pardon the banner, haven't been on XDA like I said for maybe six years, or more!
Edit 2: I believe I found the same GApps from another link djibe89 posted in LG G3 tutorial for the same process. Here:
[GUIDE/TUTORIAL/HOWTO] LG G3 D855 Stock to Android 11
[GUIDE/TUTORIAL/HOWTO] LG G3 D855 Stock to Android 11 [GUIDE/TUTORIAL/HOWTO] LG G3 LG-D855 (Unlocked/Europe) Stock to Android 11 R/LineageOS 18.1 with all files included, Netflix and Disney+ working This detailed step-by-step guide helps you...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi, you can use Bitgapps:
BiTGApps Package ARM 11: https://github.com/BiTGApps/BiTGApps-Release/releases
Clean Flash ROM > restart recovery > flash Gapps > reboot
I'm updating tutorial

djibe89 said:
Hi, you can use Bitgapps:
BiTGApps Package ARM 11: https://github.com/BiTGApps/BiTGApps-Release/releases
Clean Flash ROM > restart recovery > flash Gapps > reboot
I'm updating tutorial
Click to expand...
Click to collapse
Fantastic! Everything was going smoothly. But the GApps kept failing on install (Unsupported SDK version, and Install config not found). Thought it might be the version I downloaded, but I came back here and found your reply, so rebooted recovery after Lineage 19 install, installed GApps package, wiped Dalvik/Cache, installed Magisk, wiped dalvik/cache, and rebooted system. Joy! Now appears to be up and running. Seems as though reboot>recovery after ROM flash made the difference. Haven't rooted yet, but I am having a lot of fun. Huge gratitude to you for this tutorial and development work, as well as quick reply. Thank you!
Edit: Ahh, I'm pretty rusty. Realized now Lineage 19 is based off of Android 12, instead of 11. So I installed GApps for 11, not 12. Maybe something to do with it...?

mookdawg7 said:
Fantastic! Everything was going smoothly. But the GApps kept failing on install (Unsupported SDK version, and Install config not found). Thought it might be the version I downloaded, but I came back here and found your reply, so rebooted recovery after Lineage 19 install, installed GApps package, wiped Dalvik/Cache, installed Magisk, wiped dalvik/cache, and rebooted system. Joy! Now appears to be up and running. Seems as though reboot>recovery after ROM flash made the difference. Haven't rooted yet, but I am having a lot of fun. Huge gratitude to you for this tutorial and development work, as well as quick reply. Thank you!
Edit: Ahh, I'm pretty rusty. Realized now Lineage 19 is based off of Android 12, instead of 11. So I installed GApps for 11, not 12. Maybe something to do with it...?
Click to expand...
Click to collapse
Well, I updated tuto for 12.
Choose GApps package accordingly
I'm looking to buy a new one to try 12
And test flashing errors after repartition

djibe89 said:
Well, I updated tuto for 12.
Choose GApps package accordingly
I'm looking to buy a new one to try 12
And test flashing errors after repartition
Click to expand...
Click to collapse
Thanks, worked great for me running unofficial Lineage 19/Android 12! I wasn't able to install official Lineage 18.1. TWRP rejected install because it did not recognize my device as flox. I thought that the repartition package renamed it to this, but anyway that is what I ran into.

mookdawg7 said:
Thanks, worked great for me running unofficial Lineage 19/Android 12! I wasn't able to install official Lineage 18.1. TWRP rejected install because it did not recognize my device as flox. I thought that the repartition package renamed it to this, but anyway that is what I ran into.
Click to expand...
Click to collapse
If you need to force flash one day, you can edit updater-script in ROM archive

djibe89 said:
[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 stock to Android 11 or 12
[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 LTE/deb or Wi-Fi-only/flo to Android 11 or 12 / LineageOS 18.1 or 19 with Netflix/Disney+ working
This detailed step-by-step guide helps you transform your Google Nexus 7 (4G or wifi) with Android 6 to a powerful one with Android 11 R.
### I'll make a few notes using this style: PLEASE READ THEM.
Before going further, make sure you have the correct model.
Go to Settings > About tablet > Model number: Nexus 7
And on tablet's back cover: Nexus is written vertically (horizontally on 2012 model)
### See here if not clear: https://android.stackexchange.com/questions/58273/how-to-distinguish-nexus-7-2012-and-nexus-7-2013
If you have a SIM card slot on the side, it is a LTE model (codename deb), if not, Wi-Fi only alias flo.
Make sure you have latest official updates.
Connect tab to Wi-Fi network.
Go to Settings > About tablet > System updates. Download if update is available.
### WARNING. I'm not sure banking apps will work.
CHANGELOG
v3. Move to BitGApps, TWRP 3.6 by @followmsi, repartition script 1380/20 by @k23m
v2. Netflix and Disney+ with Magisk 23 + updated pack, improve readability
v1. Initial release
1) DOWNLOAD
- djibe Nexus 7 2013 pack: https://drive.google.com/file/d/1gPo8YGO-5b6mqugCDyi7T3k94uecwbfZ/view?usp=sharing
(contains USB drivers r13 + fastboot & adb + TWRP recovery 3.6.0_9-1 flo & deb by followmsi + Magisk root + repartition zip sysrepart_1380_20 by @k23m).
### Use Incognito web browser mode if needed to download pack.
Unzip pack on Windows desktop.
For both LTE model/deb & Wi-Fi model re-partitionned/flox
- ROM LineageOS 18.1 Unofficial: https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-18-1-2021-05-06.3569067/
Download latest build: See top link in thread above
### You may also use LineageOS 18.1 Official: https://download.lineageos.org/flox
### Want Android 12 (maybe not yet fully stable) ? Enjoy https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-19-0-2022-01-07.3569067/
+ BiTGApps Package ARM 11: https://github.com/BiTGApps/BiTGApps-Release/releases
+ Tablet must be fully charged to 100%.
2) INSTALL WINDOWS DRIVERS AND BACKUP
Go to the folder you unzipped earlier.
navigate to usb_driver_r13-windows > usb_driver.
Right click on android_winusb.inf and select Install. Confirm with OK.
Restart Windows.
Make sure Google/provider account is synchronized.
Backup photos, documents, contacts before going any further (ex: use the backupyourmobile app).
Connect tab to PC and retrieve data.
3) UNLOCK BOOTLOADER OF GOOGLE NEXUS 7 2013
In Android, go to Settings > About tablet.
Tap 7 times on "Build number", a notification confirms Developer menu is unlocked.
Go to Settings > Developer options and switch USB debugging ON.
Open a Windows command prompt on the /djibe pack folder you unziped earlier:
select folder with left click, right click while holding SHIFT on keyboard > Open command windows here
Connect tablet to PC.
Enter command
Code:
adb devices
Command starts adb and returns
Code:
077955f1 unauthorized
ADB (Android Debug Bridge) has started but tab is waiting for authorization.
On tablet, authorize adb commands from Allow USB debugging dialog: tap on OK.
Then enter command
Code:
adb reboot bootloader
Tab restarts and displays a droid, lowest message is: LOCK STATE - locked
Enter command
Code:
fastboot oem unlock
Using Volume+, select Yes - Unlock bootloader, confirm by pressing Power.
Lowest message is now: LOCK STATE - unlocked
Use Volume keys to select Start and Power to confirm.
Tablet is unlocked.
Configure Android fast, reactivate Developer options and USB debugging.
Then restart tablet to bootloader using once again
Code:
adb reboot bootloader
4) FLASH TWRP 3.5/3.6 RECOVERY
Tablet displays the droid logo.
Enter this command
Code:
fastboot flash recovery twrp-3.6.0_9-1-flo_followmsi.img
### Or for LTE model:
Code:
fastboot flash recovery twrp-3.6.0_9-1-deb_followmsi.img
Command returns Finished. Total time: 0.995s
Use Volume keys to select Recovery mode, confirm with Power.
### You may experience lagginess within the Recovery.
Welcome to TWRP recovery.
Check Never show this screen during boot again and Swip to Allow Modifications.
Go straight to Backup > select Boot, System, Data partitions.
Swipe to Backup and wait during backup.
Back to home screen > Mount.
You can access folders from PC if Data partition is checked and bottom right button show Disable MTP.
From Windows Explorer, navigate to Nexus 7 > Internal Storage.
Copy TWRP folder and paste it somewhere safe on PC.
This is a perfect backup in case of crash.
5) FORMAT PARTITIONS
Now go to Wipe > Format data.
Type yes and confirm with bottom right check icon.
Now go to Wipe > Advanced Wipe, select Dalvik / ART Cache, System, Data, Internal Storage, Cache and Swipe to Wipe.
We cannot flash on wiped partitions. Go to Reboot > Recovery and Swipe to Reboot.
Back to Mount.
Copy sysrepart_1280_120.zip on Internal Storage.
Disconnect tab.
Go to Install > tap on sysrepart_1380_20.zip and Swipe to flash.
Go to Reboot > Recovery and Swipe to Reboot.
### Repartitioned Wi-Fi model is called flox (instead of flo)
6) FLASH ANDROID + BITGAPPS (+ MAGISK)
On restart, check Never show this screen during boot again and Swipe to Allow Modifications.
Connect tab to PC.
Back to Mount menu.
Copy ROM + GAPPS (+ Magisk) to Internal storage with Windows Explorer.
Go to TWRP Home > then Install.
Select lineage-*.zip,
(for root: and Add More Zips, then Magisk.zip)
and Swipe to force install.
After flash, go to Reboot > Recovery
After TWRP reboot, go to Install > BiTGApps*.zip and Swipe to Install.
### If you get Error 70, don't be scared. Tablet doesn't know the System partition was increased.
### Go to Wipe > Advanced Wipe > Resize File System > Swipe to Resize and flash BitGApps.
Android 11 (or 12) is installed !
When done message prompts, tap on Wipe Cache/Dalvik and Swipe to Wipe.
Disconnect tab from PC.
Then Reboot System.
Let the tab start (a few minutes).
7) ROOT WITH MAGISK (OPTIONAL)
### Only if you flashed Magish via TWRP recovery.
Configure Android as you like.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
If Magisk Manager doesn't download apk. Download official apk here: https://github.com/topjohnwu/Magisk/releases
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Developer options
Settings > About tablet.
Tap 7 times on build number.
Back to Settings > Developer options
Select USB Configuration > set MTP
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x
11) NETFLIX AND DISNEY+
You may try both apps without more manipulations.
If they don't work, go back to recovery anf flash Magisk.
Open Magisk app (v23+).
Go to Settings > go to App Rename app to Godmode to hide hide.
Below, switch MagiskHide ON.
Now go to Magisk Modules tab > install liboemcrypto disabler and MagiskHide Props Config.
Connect to your Google account, download from Play Store Netflix and Disney+.
### If you are already connected to Google account.
Clear cache (Settings > Apps > All apps > Google Play Store > Storage > Clear storage) and restart tab.
Relaunch Play Store, Netflix and Disney+ will be available in SD.
That's it.
Enjoy ;-)
Thanks: @followmsi, @k23m, @nbehary, @DevSwift1, @flex1911, @yattodettaman, @emmett.tsai, TopJohnWu, TWRP team, LineageOS team, BitGApps team
Click to expand...
Click to collapse
I followed the instructions and successfully installed the OS. It was working fine, but after some time touchscreen became unresponsive and now I can't do anything. I tried restarting using the power button and got into recovery, even in recovery, the touch screen is not responding. Someone, Please help.

moneyrockers said:
I followed the instructions and successfully installed the OS. It was working fine, but after some time touchscreen became unresponsive and now I can't do anything. I tried restarting using the power button and got into recovery, even in recovery, the touch screen is not responding. Someone, Please help.
Click to expand...
Click to collapse
Hi, is ADB active ?

djibe89 said:
[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 stock to Android 11 or 12
[GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 LTE/deb or Wi-Fi-only/flo to Android 11 or 12 / LineageOS 18.1 or 19 with Netflix/Disney+ working
This detailed step-by-step guide helps you transform your Google Nexus 7 (4G or wifi) with Android 6 to a powerful one with Android 11 R.
### I'll make a few notes using this style: PLEASE READ THEM.
Before going further, make sure you have the correct model.
Go to Settings > About tablet > Model number: Nexus 7
And on tablet's back cover: Nexus is written vertically (horizontally on 2012 model)
### See here if not clear: https://android.stackexchange.com/questions/58273/how-to-distinguish-nexus-7-2012-and-nexus-7-2013
If you have a SIM card slot on the side, it is a LTE model (codename deb), if not, Wi-Fi only alias flo.
Make sure you have latest official updates.
Connect tab to Wi-Fi network.
Go to Settings > About tablet > System updates. Download if update is available.
### WARNING. I'm not sure banking apps will work.
CHANGELOG
v3. Move to BitGApps, TWRP 3.6 by @followmsi, repartition script 1380/20 by @k23m
v2. Netflix and Disney+ with Magisk 23 + updated pack, improve readability
v1. Initial release
1) DOWNLOAD
- djibe Nexus 7 2013 pack: https://drive.google.com/file/d/1gPo8YGO-5b6mqugCDyi7T3k94uecwbfZ/view?usp=sharing
(contains USB drivers r13 + fastboot & adb + TWRP recovery 3.6.0_9-1 flo & deb by followmsi + Magisk root + repartition zip sysrepart_1380_20 by @k23m).
### Use Incognito web browser mode if needed to download pack.
Unzip pack on Windows desktop.
For both LTE model/deb & Wi-Fi model re-partitionned/flox
- ROM LineageOS 18.1 Unofficial: https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-18-1-2021-05-06.3569067/
Download latest build: See top link in thread above
### You may also use LineageOS 18.1 Official: https://download.lineageos.org/flox
### Want Android 12 (maybe not yet fully stable) ? Enjoy https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-19-0-2022-01-07.3569067/
+ BiTGApps Package ARM 11: https://github.com/BiTGApps/BiTGApps-Release/releases
+ Tablet must be fully charged to 100%.
2) INSTALL WINDOWS DRIVERS AND BACKUP
Go to the folder you unzipped earlier.
navigate to usb_driver_r13-windows > usb_driver.
Right click on android_winusb.inf and select Install. Confirm with OK.
Restart Windows.
Make sure Google/provider account is synchronized.
Backup photos, documents, contacts before going any further (ex: use the backupyourmobile app).
Connect tab to PC and retrieve data.
3) UNLOCK BOOTLOADER OF GOOGLE NEXUS 7 2013
In Android, go to Settings > About tablet.
Tap 7 times on "Build number", a notification confirms Developer menu is unlocked.
Go to Settings > Developer options and switch USB debugging ON.
Open a Windows command prompt on the /djibe pack folder you unziped earlier:
select folder with left click, right click while holding SHIFT on keyboard > Open command windows here
Connect tablet to PC.
Enter command
Code:
adb devices
Command starts adb and returns
Code:
077955f1 unauthorized
ADB (Android Debug Bridge) has started but tab is waiting for authorization.
On tablet, authorize adb commands from Allow USB debugging dialog: tap on OK.
Then enter command
Code:
adb reboot bootloader
Tab restarts and displays a droid, lowest message is: LOCK STATE - locked
Enter command
Code:
fastboot oem unlock
Using Volume+, select Yes - Unlock bootloader, confirm by pressing Power.
Lowest message is now: LOCK STATE - unlocked
Use Volume keys to select Start and Power to confirm.
Tablet is unlocked.
Configure Android fast, reactivate Developer options and USB debugging.
Then restart tablet to bootloader using once again
Code:
adb reboot bootloader
4) FLASH TWRP 3.5/3.6 RECOVERY
Tablet displays the droid logo.
Enter this command
Code:
fastboot flash recovery twrp-3.6.0_9-1-flo_followmsi.img
### Or for LTE model:
Code:
fastboot flash recovery twrp-3.6.0_9-1-deb_followmsi.img
Command returns Finished. Total time: 0.995s
Use Volume keys to select Recovery mode, confirm with Power.
### You may experience lagginess within the Recovery.
Welcome to TWRP recovery.
Check Never show this screen during boot again and Swip to Allow Modifications.
Go straight to Backup > select Boot, System, Data partitions.
Swipe to Backup and wait during backup.
Back to home screen > Mount.
You can access folders from PC if Data partition is checked and bottom right button show Disable MTP.
From Windows Explorer, navigate to Nexus 7 > Internal Storage.
Copy TWRP folder and paste it somewhere safe on PC.
This is a perfect backup in case of crash.
5) FORMAT PARTITIONS
Now go to Wipe > Format data.
Type yes and confirm with bottom right check icon.
Now go to Wipe > Advanced Wipe, select Dalvik / ART Cache, System, Data, Internal Storage, Cache and Swipe to Wipe.
We cannot flash on wiped partitions. Go to Reboot > Recovery and Swipe to Reboot.
Back to Mount.
Copy sysrepart_1280_120.zip on Internal Storage.
Disconnect tab.
Go to Install > tap on sysrepart_1380_20.zip and Swipe to flash.
Go to Reboot > Recovery and Swipe to Reboot.
### Repartitioned Wi-Fi model is called flox (instead of flo)
6) FLASH ANDROID + BITGAPPS (+ MAGISK)
On restart, check Never show this screen during boot again and Swipe to Allow Modifications.
Connect tab to PC.
Back to Mount menu.
Copy ROM + GAPPS (+ Magisk) to Internal storage with Windows Explorer.
Go to TWRP Home > then Install.
Select lineage-*.zip,
(for root: and Add More Zips, then Magisk.zip)
and Swipe to force install.
After flash, go to Reboot > Recovery
After TWRP reboot, go to Install > BiTGApps*.zip and Swipe to Install.
### If you get Error 70, don't be scared. Tablet doesn't know the System partition was increased.
### Go to Wipe > Advanced Wipe > Resize File System > Swipe to Resize and flash BitGApps.
Android 11 (or 12) is installed !
When done message prompts, tap on Wipe Cache/Dalvik and Swipe to Wipe.
Disconnect tab from PC.
Then Reboot System.
Let the tab start (a few minutes).
7) ROOT WITH MAGISK (OPTIONAL)
### Only if you flashed Magish via TWRP recovery.
Configure Android as you like.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
If Magisk Manager doesn't download apk. Download official apk here: https://github.com/topjohnwu/Magisk/releases
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Developer options
Settings > About tablet.
Tap 7 times on build number.
Back to Settings > Developer options
Select USB Configuration > set MTP
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x
11) NETFLIX AND DISNEY+
You may try both apps without more manipulations.
If they don't work, go back to recovery anf flash Magisk.
Open Magisk app (v23+).
Go to Settings > go to App Rename app to Godmode to hide hide.
Below, switch MagiskHide ON.
Now go to Magisk Modules tab > install liboemcrypto disabler and MagiskHide Props Config.
Connect to your Google account, download from Play Store Netflix and Disney+.
### If you are already connected to Google account.
Clear cache (Settings > Apps > All apps > Google Play Store > Storage > Clear storage) and restart tab.
Relaunch Play Store, Netflix and Disney+ will be available in SD.
That's it.
Enjoy ;-)
Thanks: @followmsi, @k23m, @nbehary, @DevSwift1, @flex1911, @yattodettaman, @emmett.tsai, TopJohnWu, TWRP team, LineageOS team, BitGApps team
Click to expand...
Click to collapse
hi i followed the tutorial but when i flash twrp recovery then the touch is not working inside the recovery.its really annoying, can you please help me with this im using nexus 7 2013 LTE version

ShivaRK666 said:
hi i followed the tutorial but when i flash twrp recovery then the touch is not working inside the recovery.its really annoying, can you please help me with this im using nexus 7 2013 LTE version
Click to expand...
Click to collapse
Hi, can you try with suitable 3.5 TWRP ?
[ROM][flo|deb][UNOFFICIAL][LineageOS 20.0]
LineageOS 20.0 lineage-20.0-20230507-UNOFFICIAL-flo.zip lineage-20.0-20230507-UNOFFICIAL-deb.zip Known issues: - We are still Permissive (SELinux) - Encryption is not working .. Pls do NOT encrypt your /data partition! - Camera is not fully...
forum.xda-developers.com

[GUIDE/TUTORIAL/HOWTO] HTC One M9 any model from Stock to Android 12

[GUIDE/TUTORIAL/HOWTO] HTC One M9 from Stock to Android 12
[GUIDE/TUTORIAL/HOWTO] HTC One M9 any model from Stock to Android 12
This detailed step-by-step guide helps you transform your HTC One M9 (any model) to a powerful one with Android 12.
Make sure you have the HTC One M9 model, in Android, go to Settings > About > Phone identity and check Model number.
### FM Radio doesn't work with Android 11.
Models supported:
- Himauhl (Europe WWE | GSM | MID 0PJA10000)
- Himaul or Himaulatt (AT&T, Developer Edition, Unlocked | GSM | MID OPJA11000)
- Himaultmus (T-Mobile | GSM | MID OPJA12000), not sure you can get Android 7
- Himauhl (Chunghwa Telecom | GSM | MID 0PJA13000)
- Himawhl (Sprint | CDMA | MID OPJA20000)
Himawl (Verizon | CDMA | MID OPJA30000) is not guaranteed, see: https://forum.xda-developers.com/f/verizon-htc-one-m9.4125/
* MID = Model ID
CHANGELOG
v1. Initial release
1) DOWNLOAD
- djibe HTC One M9 pack : https://bit.ly/djibe-onem9-pack
(includes HTC USB Drivers, recovery TWRP 3.6.2_9-0 for all M9, Magisk Root, adb, fastboot.exe and htc_fastboot.exe).
Unzip the djibe folder from the zip on root folder of C:\ drive.
- ROM for Himaul or Himawl: Unofficial LineageOS 18.1: https://forum.xda-developers.com/t/rom-11-0-0-himaul-himawl-lineageos-18-1-unofficial.4199175/unread
Download latest build here: https://mirror.codebucket.de/claymore1297/LineageOS/18.1/hima
Android 12.1 / LOS 19.1 is WIP (no telephony yet): https://forum.xda-developers.com/t/rom-12-1-0-himaul-himawl-lineageos-19-1-unofficial.4378803/unread
Or you can use AICP 17.1 right below
- ROM Android 12 for other Hima models: Android Ice Cold Project Official 17.1: https://forum.xda-developers.com/t/rom-12-1-0-hima-android-ice-cold-project-17-1-unofficial.4399865/
Download latest build here: https://dwnld.aicp-rom.com/
### Localisation (GPS) must stay turned ON to get Telephony
Or try crDroid 7.12
- NikGapps-SL ARM64 Core or Basic: https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-SL/
- Charge phone to 100%
- 8+ GB MicroSD card formatted in FAT32
- Copy ROM + Google Apps +/- Magisk root zipfiles without unzipping content. Insert microSD in phone.
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe > click on Run as administrator and continue the setup.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
### Phone is still not visible in Windows Explorer ? See fix at end of tutorial.
Collect all personal photos, videos, etc ... and backup these on PC.
Use an app like Backupyourmobile/SMS Backup & Resotre to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is inaccessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock, see dedicated section at the end of tutorial.
2) KNOW YOUR MODEL
Shutdown phone.
Start in fastboot mode: hold Power + Volume- until it vibrates and release both buttons.
Wait until hTC download mode shows up.
On mine I see:
SECURITY: *** UNLOCKED ***
model: htc_himawhl
CID-11111111
SECURITY UNLOCKED means S-OFF for SECURITY-OFF, otherwise S-ON. With S-ON you can upgrade firmwares but cannot use previous versions.
3) UPGRADE TO LATEST OFFICIAL ROM
In Android, go to Settings > About > Software information.
Android version is 7 and HTC Sense version is 8.0.
If Android is already 7, go to next chapter.
But before, search for IMEI and note this number somewhere safe (we never know).
Otherwise, we need to flash suitable stock Android 7 Nougat firmware, depending on your model.
In Settings > About > Software information, note down Software version (in case of future error).
For me it is 3.41.651.4 (651 is the SKU part, meaning Sprint US ROM).
See Sneakyghost's and Behold_this' SKU-, CID- and MID-List: https://docs.google.com/spreadsheets/d/10H7RftecZZKb5tT2zpShfYNFAfSe-imhhqtVfeMPVDA/edit?pli=1#gid=0
Now tap on More > tap 7 times on Build number. It unlocks Developer options.
Go back to Settings menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Switch ON USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
But before upgrading to Android 7 Nougat, you need the latest Android 6 official ROM available for your model.
- Himaul or Himaulatt: RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.16.exe
- Himaultmus, not sure you can get Android 7: http://downloadmirror.co/android/29Ri/RUU_HIMA_UL_M60_SENSE70_TMUS_MR_TMOUS_3.39.531.7.exe
- Himawhl: https://www.androidfilehost.com/?w=files&flid=334967 or https://downloadmirror.co/1KrL/RUU_HIMA_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_3.41.651.21.exe
- Himawl: http://downloadmirror.co/android/29...0105_CNV_1.26_002_release_469809_signed_1.zip
RUU*.exe: launch installer, connect phone (from within Android started or in Download mode) and follow executable steps.
Wait during flash.
After reboot, you have access to HTC software updates.
Go to Settings > System updates > HTC software update > CHECK NOW
Install available updates.
Repeat after each update until update 4.x is fetched.
Here you go with Android 7.
### I succeeded with Sprint model, tell us here if you experience problems with other models.
### Flash a RUU in *.zip format
### Copy RUU zipfile to microSD card and insert in phone. Shutdown phone.
### Start in fastboot mode: hold Power + Volume- until it vibrates and release both buttons.
### Use Volume- to Reboot to Bootloader. Confirm with Power.
### Use Volume- to BOOT TO RECOVERY MODE. Confirm with Power.
### Once in recovery, use Volume- to: Apply update from SD card
### Use Volume to select RUU zipfile
### Wait during flash
4) UNLOCK BOOTLOADER
Save IMEI, go to Settings > About > Phone identity > IMEI (15 digits).
In Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to Settings menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Check ON OEM unlocking and USB debugging options.
Go to Settings > Security > Screen lock > None
Go to Settings > Storage > Phone storage, scroll down and make sure Phone storage encryption is unchecked.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
Or type cmd in Windows address bar and hit enter to launch a Command prompt in actual folder.
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT53****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off. Or see fix at the end of this tuto.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Use volume keys to switch to Download mode !!!
### With HTC One M9, fastboot commands have to be sent from Download mode (took me hours to figure it out, thanks @DigiGoon).
Type :
Code:
fastboot devices
Command returns :
Code:
HT53**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Type :
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website: https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, choose HTC One M9, click Begin Unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you: Token Submitted Successfully!
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type:
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return:
Code:
Device is unlocked
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter:
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.2_9-0-hima.img
Command returns :
Code:
finished. total time: x.xxxs
Now enter:
Code:
fastboot reboot-bootloader
Press Volume- to navigate to BOOT TO RECOVERY MODE, and confirm with Power button.
Phone reboots to TWRP recovery (with red message alert).
5) BACKUP STOCK SYSTEM
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Always make a backup of your stock system. We never know when a weird bug will decapitate the system.
Go to Backup menu, select all partitions and Backup to microSD card (Select Storage button).
Backup the generated TWRP folder content from your microSD card to PC.
6) WIPE PARTITIONS
Back to Home menu, go to Wipe > Format data, type yes and confirm with bottom righ icon.
Go to Wipe > Advanced wipe.
Select Dalvik / ART Cache, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
### Don't wipe SDcard
Got ot Reboot > Recovery
7) FLASH ROM AND GAPPS +/- ROOT/MAGISK
Back to Home screen, tap on Install > choose aicp*.zip
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> open_gapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
### To flash Magisk, go to Reboot > Recovery and flash Magisk after reboot.
We need to format Data once more to remove an encryption that took me time to figure out.
Go back to Wipe one more > Format Data > yes
When format complete, tap on Reboot system
Wait during long first boot.
Setup Android.
8) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS to TWRP team, AICP team, All M9 contributors.
You can find all my tutorials at: https://github.com/djibe/Android-tutorials
##################################################
## Unlock bootloader without Unlock key from HTCDev
See: https://forum.xda-developers.com/t/...loader-without-htcdev-s-off-required.3092036/
## Seek help for your model:
- Sprint: https://forum.xda-developers.com/t/...tc-one-m9-4-27-651-4-updated-4-13-17.3073355/
## Change 4G/LTE region
Edit build.prop
Reboot to recovery > Mount > select System
adb devices
adb root
adb remount
adb pull /system/build.prop
Edit with Notepad++
add ro.telephony.default_network=20
save file
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop

djibe89 said:
Himaultmus (T-Mobile | GSM | MID OPJA12000), not sure you can get Android 7
Click to expand...
Click to collapse
What is the "not sure" based on?

mmortal03 said:
What is the "not sure" based on?
Click to expand...
Click to collapse
Hi,
I didn't find a RUU for this model during a quick search.
Do you know more about an official firmware ?

djibe89 said:
Hi,
I didn't find a RUU for this model during a quick search.
Do you know more about an official firmware ?
Click to expand...
Click to collapse
I don't own this model, but I believe the T-Mobile Nougat firmware is: 0PJAIMG_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6_Radio_01.01_U114401021_126.03.70206G_2_F_release_497408_signed_2_4.zip

mmortal03 said:
I don't own this model, but I believe the T-Mobile Nougat firmware is: 0PJAIMG_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6_Radio_01.01_U114401021_126.03.70206G_2_F_release_497408_signed_2_4.zip
Click to expand...
Click to collapse
Himaul is the International model isn't it ?
I'll dig deeper.
Thx for asking.
Struggling with Verizon model exhausted me

djibe89 said:
Himaul is the International model isn't it ?
Click to expand...
Click to collapse
I believe himaul can refer to a couple of U.S. variants, the AT&T and the T-Mobile. The AT&T variant appends 'att' to the end, and the T-Mobile may append 'tmus' (but I don't have a T-Mobile variant in front of me to verify this).

Hello, I just bought a One M9 model htc_himawhl, and I would like to install android 12 on it.
The device is S-OFF and the bootloader indicate "Software status: Official" and "LOCKED".
I have a few questions about your tutorial.
What advantages we get when we unlock the bootloader ? I installed TWRP 3.7 yesterday, I suppose I can install any custom rom no ?
You didn't gives htc_himawhl compatible Android 12 rom, which one can work with in the list you given ?
I had an HTC U Ultra before this phone (which is now dead...), the process was much more easier because it was an international model. :/
Thanks in advance for your answer !

SofianeLasri said:
Hello, I just bought a One M9 model htc_himawhl, and I would like to install android 12 on it.
The device is S-OFF and the bootloader indicate "Software status: Official" and "LOCKED".
I have a few questions about your tutorial.
What advantages we get when we unlock the bootloader ? I installed TWRP 3.7 yesterday, I suppose I can install any custom rom no ?
You didn't gives htc_himawhl compatible Android 12 rom, which one can work with in the list you given ?
I had an HTC U Ultra before this phone (which is now dead...), the process was much more easier because it was an international model. :/
Thanks in advance for your answer !
Click to expand...
Click to collapse
Hi, normaly you need to unlock bootloader to boot a custom ROM.
To find a suitable ROM you should read the Sprint model section of XDA

@SofianeLasri , if you need VoLTE in your country/with your carrier, unfortunately, none of the recent custom ROMs for this phone have VoLTE/IMS registration working. It is being worked on, but there are no guarantees. You should read and follow the following thread for details/updates on this: https://forum.xda-developers.com/t/...ce-cold-project-17-1-official.4399865/page-12

What a shame, I buy a phone that I think is known on the custom rom scene, and I come across an abandoned operator model...

SofianeLasri said:
What a shame, I buy a phone that I think is known on the custom rom scene, and I come across an abandoned operator model...
Click to expand...
Click to collapse
Custom models are pain for obsolescence

[GUIDE/TUTORIAL/HOWTO] Motorola Moto G3 from Stock to Android 12

[GUIDE/TUTORIAL/HOWTO] Motorola Moto G3 from Stock to Android 12
[GUIDE/TUTORIAL/HOWTO] Motorola Moto G3 (2015 osprey or merlin) from Stock Android 12.1/LineageOS 19.1
Complete guide to install Android 12.1 on your Motorola Moto G3.
This tutorial only applies to this model, to check the correct version:
in Android, go to Settings > System > About phone, make sure it is one of these models:
Osprey variants (1.4 GHz quad core Snapdragon 410):
- XT1540
- XT1541
- XT1542
- XT1543
- XT1544
- XT1548
- XT1550
Details: https://wiki.lineageos.org/devices/osprey/
Merlin variants (Moto G3 Turbo 1.5 GHz octo core Snapdragon 615):
- XT1556
- XT1557
Remove back cover to see the model reference.
Netflix and Disney+ are working.
See all my tutorials at https://github.com/djibe/Android-tutorials
CHANGELOG
v1. Initial release
1) WHAT YOU NEED
- djibe Moto G3 pack: https://bit.ly/motoG3djibepack
(Contains link to Motorola Bootloader unlock + TWRP Recovery 3.7.0_9-0 + Magisk root + Motorola USB drivers x32/64 + fastboot + all cited files)
+ ROM Android 12 LineageOS Unofficial 19.1 for osprey: https://forum.xda-developers.com/t/rom-12l-wip-lineageos-19-1-unofficial-osprey-merlin.4358885/
Download latest build here for osprey: https://sourceforge.net/projects/althafvly/files/los19/osprey/
Download latest build here for merlin: https://sourceforge.net/projects/althafvly/files/los19/merlin/
Or LineageOS Official 17.1 (Android 10): https://sourceforge.net/projects/althafvly/files/los17/nightly/
Or CrDroid Official 6 (Android 10): https://crdroid.net/osprey/6
Or CrDroid Unofficial 7.12 for merlin (Android 11): https://forum.xda-developers.com/t/rom-11-0-unofficial-crdroid-v7-12-merlin.4326065/
+ BitGApps ARM 12.1: https://github.com/BiTGApps/BiTGApps-Release/releases
+ a microSD card formatted in FAT32: copy ROM, GApps (+/- Magisk). Insert it in phone
+ Charge phone to 100%
2) INSTALL DRIVERS
Install Motorola 64 bits drivers (32 or 64 bits depending on your Windows version).
Then plug Moto G5 to PC and let the install go on.
3) BACKUP YOUR DATA
When your phone is connected to Windows, search for all .jpg, .mp3, .mp4 files on your phone and make copies on your PC.
Sync your Google Account, WhatsApp and co.
Then, with an app like Backupyourmobile, backup all your SMS, MMS, contacts.
Make sure the backup is located on microSD card.
4) UNLOCK BOOTLOADER
Update your Moto G3 to the latest official Android 6 (aka Marshmallow).
In Android, go to Settings > About phone > System updates. Make sure you have latest version.
Back to Settings > System > About phone.
Android version must be 6.0.1.
Tap 7 times on Build number to unlock Developer options.
Go to Settings > Developer options.
Switch ON "OEM unlocking" and USB debugging.
### OEM unlocking is disabled ? Reset phone to factory settings and start all over.
Then, go to Motorola website (shortcut in my archive or right below):
Sign in to Motorola - Motorola Mobility LLC
Sign in to Motorola
accounts.motorola.com
Subscribe using your Google Account or email.
Shut down phone.
Power it on in fastboot mode: Hold Power et Volume- during 3-4 secondes and release.
Screen is black with lines of text, starting with AP Fastboot Flash Mode (Secure).
Connect phone to USB, wait for fastboot drivers to install.
In Windows, select the /flash subfolder you unzipped from my archive.
On keyboard, make a combo Shift + right click > Open command windows here.
(or type cmd in Address bar and then hit Enter)
Write this command in Windows terminal :
Code:
fastboot oem get_unlock_data
confirm using Enter.
Command sends back a message like this :
Code:
$ fastboot oem get_unlock_data
(bootloader) 3A55840996502715#5A593232333551
(bootloader) 4C3458004D6F746F4733000000#A30D
(bootloader) 7A8CCA2F5A312B797DF96C730F10CA5
(bootloader) 2440E#E94B1C1700000000000000000
(bootloader) 0000000
OKAY [ 0.235s]
Finished. Total time: 0.235s
Select all text > right click > select all.
Open a notepad editor, and paste text.
Rework the text to get it on 1 line, and remove all spaces and "(bootloader)" messages.
It should look like this: 3A55840996502715#5A5932323335514C3458004D6F746F4733000000#A30D7A8CCA2F5A312B797DF96C730F10CA52440E#E94B1C17000000000000000000000000
Now, copy this line and paste it in Motorola website: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
Below, click on "Can my device be unlocked?" button.
Wait and then go to bottom of page.
I agree to be bound by the terms of the legal agreement: select Yes and click on "Request Unlock Key"
You get the unlock key by email, looking like: XVF3XJW4CY5VFHYEHM4K
Use this unlock key in the following Windows command:
Code:
fastboot oem unlock YOUR_UNLOCK_CODE
Confirm with enter and wait a moment until success is confirmed: (bootloader) Phone is unlocked successfully!
Keep Windows command opened.
4) FLASH RECOVERY
Now enter this command:
Code:
fastboot flash recovery twrp-3.7.0_9-0-osprey.img
### Or merlin according to your model
Confirm with Enter.
Terminal confirms : "Finished. Total time: 0.670s".
### For future TWRP updates, TWRP.img can be flashed from TWRP recovery itself (Install > Install Image).
Back to the phone (still in fastboot/bootloader mode).
Press Volume- to select "RECOVERY MODE". Confirm by pressing Power.
Welcome to TWRP 3.7 recovery.
TWRP asks for Keep System Read Only ? Swipe to Allow Modifications.
### You don't see this warning screen? Then you'll get "TWRP unable to mount storage" while trying to wipe partitions.
### > in TWRP, go to Reboot > Recovery so Recovery will refresh and popup the partition writing privilege.
Go to Wipe > Format data
Type yes and confirm with bottom right check icon.
Then go to Reboot > Recovery.
Go straight to Backup menu.
Select System, System Image and Boot partitions.
Tap on Select Storage and set Micro SD card.
Swipe to Backup and wait during backup.
### If MicroSD card is too small. Backup on data partition and after backup has ended, go to Mount and connect phone to PC to retrieve TWRP backup folder.
### Store this backup (aka nandroid backup) somewhere safe before going further.
5) WIPE PARTITIONS
Go to Wipe menu > Advanced wipe.
Select cache, data and system and swipe to wipe.
6) FLASH ROM, GAPPS +/- MAGISK
Back to TWRP Home menu. Then tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active).
then Add more Zips > GApps*.zip,
(optional: add Magisk*.zip)
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Android 12 is installed !
Wait for the phone to boot during 5 minutes.
7) ROOT WITH MAGISK (OPTIONAL)
### Only if you flashed Magisk via TWRP recovery
Do not connect to Android account.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
Open Files app > Install Magisk.apk.
Then in Magisk goto Settings > Hide magisk app and give it a name, switch Zygisk option ON.
Go to Modules Tab > Install from Storage: MagiskHidePropsConfig and safetynet.
Reboot phone.
You can use yasnac app to check Safetynet passes.
Then with Files App: install netflix and disney+ if needed.
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Disable USB debugging to connect phone as storage to PC
- Developer options
Settings > About phone.
Tap 7 times on build number.
Back to Settings > System > Advanced > Developer options
Select USB Configuration > set MTP
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x
That's it.
Enjoy ;-)
djibe
Thanks: @althafvly, LineageOS team, TWRP team, NikGapps team, TopJohnWu (Magisk)
--------------------------------------------------------------------------------------
BOOT INTO RECOVERY
- Shutdown phone
- Hold Power + Volume- until open droid logo shows up and release buttons
- Press Volume- twice to set RECOVERY MODE and press Power to confirm

Thank you! Considering that these instructions are very fresh and I was looking for exactly this is quite crazy! Everything worked like a charm and I was able to install Lineage on the moto g (3rd gen)