Related
I'm having an audio problem in the version of my Android HU, I need to change to a current one or downgrade (to 8.1).
I didn't find any firmware in version 2 gb, I tried to install the versions of 1 gb and it causes error
See below for details of my HU. Thank you very much for helping me (sorry for my english)
ANDROID: YT9216B_00002_v004_20190830
VERSION 9.1
XYAUTO: 3.1 (8227L)
CAM BUS 3.1
DDR 2GB
FLASH 16 GB
MCU1: 3.1
I am having the same stereo.
The model details are almost the same as you mentioned for my android stereo.
The issue with my stereo is when I do a factory reset, the system gets hung after showing the "Erasing" android icon and a dead android icon with a Blue exclamation is displayed,
Any fix for this ?
Smarty_009 said:
Hi friends, after lot of search somehow i I have landed here.
Yesterday i have purchased a new Android head unit. I want to take a full Backup of it's unrooted stock ROM with stock recovery. So that in case i ever brick it i will be able to flash it to factory state easily. Can someone please direct me to the link or procedure of how to make a full system Backup.
Details are as below:
Android YT9216B_00002_V004_20200319
but CPUZ says build ID: YT9218_0002_V004
OS: 8.1go XY AUTO:3.2 (8227L)
CAN Pro: 3.0 ( 8227L)
DDR: 2G. FLASH:32G
CPU: A7 1.3GHz x4
Amplifier AC7315MOS bile duct 50Wx4
Display: 1024x600
MCU: 3.1 ( 8227L)
MODEL Name: 8227L_demo
Security patch Nov 5, 2017
Kernel 3.18.22 [email protected]_poweredge_r730#6
Thursday March 19 20:51:37 CST 2020
Build No. Android-trunk-m0.AC8227L-V1.0
Custom build Android-trunk-m0.AC8227L-V1.0
Let me know if anything else is required.
I want the procedure to Backup the factory state.
Suggestions to try root and new ROM will be welcome.
Click to expand...
Click to collapse
please, help me.
i use this link to instal my 2 GB android car stereo: https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
roly_HR said:
i use this link to instal my 2 GB android car stereo: https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
Click to expand...
Click to collapse
How do I install?
Thanks
there is Instructions below the post
Did this work for u I have the same device.
Hi friends, after lot of search somehow i I have landed here.
Yesterday i have purchased a new Android head unit. I want to take a full Backup of it's unrooted stock ROM with stock recovery. So that in case i ever brick it i will be able to flash it to factory state easily. Can someone please direct me to the link or procedure of how to make a full system Backup.
Details are as below:
Android YT9216B_00002_V004_20200319
but CPUZ says build ID: YT9218_0002_V004
OS: 8.1go XY AUTO:3.2 (8227L)
CAN Pro: 3.0 ( 8227L)
DDR: 2G. FLASH:32G
CPU: A7 1.3GHz x4
Amplifier AC7315MOS bile duct 50Wx4
Display: 1024x600
MCU: 3.1 ( 8227L)
MODEL Name: 8227L_demo
Security patch Nov 5, 2017
Kernel 3.18.22 [email protected]_poweredge_r730#6
Thursday March 19 20:51:37 CST 2020
Build No. Android-trunk-m0.AC8227L-V1.0
Custom build Android-trunk-m0.AC8227L-V1.0
Let me know if anything else is required.
I want the procedure to Backup the factory state.
Suggestions to try root and new ROM will be welcome.
Hi guys am on this stock ROM.
Smarty_009 said:
Hi friends, after lot of search somehow i I have landed here.
Yesterday i have purchased a new Android head unit. I want to take a full Backup of it's unrooted stock ROM with stock recovery. So that in case i ever brick it i will be able to flash it to factory state easily. Can someone please direct me to the link or procedure of how to make a full system Backup.
Details are as below:
Android YT9216B_00002_V004_20200319
but CPUZ says build ID: YT9218_0002_V004
OS: 8.1go XY AUTO:3.2 (8227L)
CAN Pro: 3.0 ( 8227L)
DDR: 2G. FLASH:32G
CPU: A7 1.3GHz x4
Amplifier AC7315MOS bile duct 50Wx4
Display: 1024x600
MCU: 3.1 ( 8227L)
MODEL Name: 8227L_demo
Security patch Nov 5, 2017
Kernel 3.18.22 [email protected]_poweredge_r730#6
Thursday March 19 20:51:37 CST 2020
Build No. Android-trunk-m0.AC8227L-V1.0
Custom build Android-trunk-m0.AC8227L-V1.0
Let me know if anything else is required.
I want the procedure to Backup the factory state.
Suggestions to try root and new ROM will be welcome.
Click to expand...
Click to collapse
I have these problems.
1. Am not able to update Agama launcher. I already have licensed copy but it's not shown in Play Store.
2. Radio app only has FM option. I can't find AM in radio.
3. Whenever radio app and navigation app run together. The volume of radio is higher and navigation instructions play in background at lower volume. I can't understand the voice guidance. Navigation app couldn't silence radio app.
4. Split screen option is not working. To play two apps side by side.
5. When I try to install Google assistant from play store I get a message saying my device is not supported. I couldn't install and use Google assistant and Android AUTO.
Any help will be welcome. My ROM is stock ROM.
hello can you help me send me new firmware update thank you
Xy auto 3.0 8227l in this system Google is not signing in and because of this my YouTube not working
Hi friend, I just installed the below head unit, but I wanted to upgrade my device, How can I download and install which version is most stable.
Details are as below:
Android YT9216B_00002_V004_20190801
OS: 8.1
XY AUTO:3.0 (8227L)
CAN Bus: 3.0 ( 8227L)
DDR: 1G
FLASH:16G
CPU: A7 1.3GHz x4
Display: 1024x600
MCU: 3.1 ( 8227L)
Kernel 3.18.22 [email protected] #29
Thu Aug 1 13:01:56 CST 2019
Build No. Android-trunk-m0.AC8227L-V1.0
Custom build Android-trunk-m0.AC8227L-V1.0
Thanks
Wayne
Can you help me with usb 4g dongle issue?
Hi I have made a video tutorial on how to make stock ROM backup
Hi friends,
Have you are observed overheating of touch panel of your car stereo or hangs in your Android car stereo or system not responding or application keep crashing etc.
Then this video is for you. I have done this small modification in my car.
I made a small hole on sides of AC vents such that cool air blows over the heat sink of Android car stereo and two cpu fans of 12V take power supply from same connector.
Whenever the car stereo is turned ON the fans also turn ON and blow cool air over the heat sink to keep it cool.
Hi everyone,
this is my first post here .actually i am stucked because of my android headunit.once i performed reseting using touch button but now while turning on system is asking for password just like we use security code at our android mobile to protect it from using by strangers.i dont know about exact model and version of HU and i have tried multiple combinations of code like ,
0000
8888
1234
127
12345
1122
112233
000000
to unlock device but all in vein.So would you please suggest me some valuable solution to resolve this problem.some pictures from screen and its panel are also attached here.
Mr. Bajwa said:
Hi everyone,
this is my first post here .actually i am stucked because of my android headunit.once i performed reseting using touch button but now while turning on system is asking for password just like we use security code at our android mobile to protect it from using by strangers.i dont know about exact model and version of HU and i have tried multiple combinations of code like ,
0000
8888
1234
127
12345
1122
112233
000000
to unlock device but all in vein.So would you please suggest me some valuable solution to resolve this problem.some pictures from screen and its panel are also attached here.View attachment 5291807View attachment 5291807View attachment 5291809View attachment 5291811View attachment 5291813View attachment 5291815
Click to expand...
Click to collapse
Bajwa ji it appears the password is Google password not unit lockscreen password.
Please try your Google account password that you may have set to protect that unit.
It is ac8227l yt9216b unit 16gb ROM version.
If that fits not work then apko factory reset karna padega. But all data will be lost forever.
Smarty_009 said:
Bajwa ji it appears the password is Google password not unit lockscreen password.
Please try your Google account password that you may have set to protect that unit.
It is ac8227l yt9216b unit 16gb ROM version.
If that fits not work then apko factory reset karna padega. But all data will be lost forever.
Click to expand...
Click to collapse
Sir i could not recall password for that account. Further how to perform factory reset? bcoz screen is locked. So should i go for installation of new software. if so then plz guide how to install it...
Try to connect the unit to your computer or laptop. If somehow you can connect the unit to adb mode then factory reset can be done from recovery mode.
Hi I have made a updated video tutorial with added info on how to make stock ROM backup.
[UPDATE][ROM Dump] Stock ROM backup of Android Car Stereo | Memory Dump Procedure via flashtool
Hi guys
I have android head unit from a german / swiss manufacturer (radical r-d211 2-din). Which is running Andorid 9. I can't post links here so its a bit hard to post the details. => www{dot}my-radical{dot}com
Apparently the model is a 8227l
Kernel: 3.18.79 / [email protected] #58
Build number: full_8227l_demo-userdebug 9 O11019 1571038753 userdebug
Custom build version: alps-mp-o1.mp5
HMI: LOMU08.D.P.F.3.08.2020.04.02.09.12
MCU: LMQ07.191025(H)
MEDIA: HC_v2.0.0_191113_1430(v1.71)
BTV: BT.19.11.12.1200
I'd like to install GAPPS because these are missing. It is also not possible to register my google account.
I can install APK's, but installing the g play store or the g play services doesn't work. => Apps are crashing.
I don't have root permissions, but from what I see is that I can enable usb debugging tools.
I would like to preserve the current rom because it is working so far. (Front / Rear camera, Bluetooth)
The device is a touch only model, a reset button is available. The official rom can be downloaded from the site.
So my questions are basically:
- Do I need to root my device if I want to install the gapps?
- If so what tool would be advised to try to root my device? (I have access to Windows and Linux)
- Is it possible to root a device and preserve my stock rom without access to the source? => Only the published update / image
- How do I get access to the recovery functions without physical buttons? (I rooted once an android phone years ago...)
Thanks
Same Radio, same Problem
Hi,
i have exactly the same Problem. I am frustrated because when i got the radio google apps like google maps worked just fine. But after an update from the radical website it doesn't work anymore and crashes when i install google play services ( google account manager, google services framework, google play services and google play store). So there should be a way do make it work. Did you find any solution in the meantime?
Thanx Tobias
Hi Tobias
I havn't found anything yet. But I would be interested in a solution. Please let me know if you find something.
Thanks
Does anyone have a solution for this problem? Same problem here....
Thanks
Hi there XDA member.
Anyone looking for the latest firmware for the Quad-Core T3 P1 - Board exdroid - Sun8iw11p1 - 4x ARM Cortex-A7 @ 1.60Ghz T3L 8035 2+32G IPS
V8.1.1_20210825.102119_THEME1.rar
drive.google.com
Extract Zip file to clean Fat32 formatted USB drive, make sure all 5 files are on the USB not in a folder.
open settings - Car settings and click the System Update - wait for Reboot and will flash.
YouTube instructions
Thank you
Extra settings password: 123456
Developer and Factory reset password: 7890
Warch1ld77 said:
Hi there XDA member.
Anyone looking for the latest firmware for the Quad-Core T3 P1 - Board exdroid - Sun8iw11p1 - 4x ARM Cortex-A7 @ 1.60Ghz T3L 8035 2+32G IPS
Click to expand...
Click to collapse
Hello, thank you very much for putting the firmware, but, I do the whole procedure the 5 files in the root in a Fat32 USB memory, I mark the box to format the internal flash, the stereo takes a long time and indicates that it does not turn off, then It restarts, everything gives the impression that it is going to carry out the procedure but the only thing that happens is that the vehicle logo and the android letters are reset, when it starts after a long time in the Android letters it turns out that it has performed a configuration reset factory, nothing more .... !! it never reaches the screen where you see how the installation and update bar progresses as in the video, and the information continues to show the same number and date of compilation, mcu, system and the same failures of course .. I'm doing wrong .? I have manually reset to factory, I have changed memory, I have tried 2 different compilations: (20210803 and 20210825) with the name THEME1, I have downloaded from different places ..! Nothing, always the same behavior and result.
Supposedly this is the correct firmware for my Stereo.
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 10 (Fake) - 8.1 API Level 29
VW:
(T3L.3.19, PT2313, QN8035, MM030,296)
CPU-Z:
AllWinner A23 1.60 GHZ
Model: QUAD-CORE T3 p1 (t3_p1)
Board: exdroid
Hardware: sun8iw11p1
Build ID: t3_p1-eng 8.1.0 OPM1.171019.026.20210430 test-keys
Resolution: 1027x600 Pixels
Screen Size: 7.42 inches (but I bought it as a 9-inch)
Thank you in advance for the light and help ...
Greetings from the Middle of the World
Hey there that's very strange. mine is a T3L-P1 2gbx32Gb. i am currently awaiting supplier to send latest fixed firmware the minute i receive ill upload
Warch1ld77 said:
Merhaba XDA üyesi.
Dört Çekirdekli T3 P1 - Board exdroid - Sun8iw11p1 - 4x ARM Cortex-A7 @ 1.60Ghz T3L 8035 2+32G IPS için en son aygıt yazılımını arayan herkes
V8.1.1_20210825.102119_THEME1.rar
drive.google.com
Fat32 formatlı USB sürücüsünü temizlemek için Zip dosyasını ayıklayın, 5 dosyanın hepsinin bir klasörde değil USB'de olduğundan emin olun.
ayarları açın - Araba ayarları ve Sistem Güncellemesini tıklayın - Yeniden Başlatmayı bekleyin ve yanıp sönecektir.
YouTube talimatları
Teşekkürler
Ekstra ayarlar şifresi: 123456
Geliştirici ve Fabrika sıfırlama şifresi: 7890
Click to expand...
Click to collapse
Can I upload the hardware and software information to the device in the picture and use it without any problems? Thank you.
Добрый день! Такой вопрос, приложение ТЕМЫ, просит на некоторые виды лаунчеров код активации. Может быть есть у кого взломанная версия, или коды активации??? Версия прошивки V8.1.1_20210825.102119_THEME1
Daywalker78 said:
Can I upload the hardware and software information to the device in the picture and use it without any problems? Thank you.
Click to expand...
Click to collapse
have you tried this image
scalamusical said:
Hello, thank you very much for putting the firmware, but, I do the whole procedure the 5 files in the root in a Fat32 USB memory, I mark the box to format the internal flash, the stereo takes a long time and indicates that it does not turn off, then It restarts, everything gives the impression that it is going to carry out the procedure but the only thing that happens is that the vehicle logo and the android letters are reset, when it starts after a long time in the Android letters it turns out that it has performed a configuration reset factory, nothing more .... !! it never reaches the screen where you see how the installation and update bar progresses as in the video, and the information continues to show the same number and date of compilation, mcu, system and the same failures of course .. I'm doing wrong .? I have manually reset to factory, I have changed memory, I have tried 2 different compilations: (20210803 and 20210825) with the name THEME1, I have downloaded from different places ..! Nothing, always the same behavior and result.
Supposedly this is the correct firmware for my Stereo.
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 10 (Fake) - 8.1 API Level 29
VW:
(T3L.3.19, PT2313, QN8035, MM030,296)
CPU-Z:
AllWinner A23 1.60 GHZ
Model: QUAD-CORE T3 p1 (t3_p1)
Board: exdroid
Hardware: sun8iw11p1
Build ID: t3_p1-eng 8.1.0 OPM1.171019.026.20210430 test-keys
Resolution: 1027x600 Pixels
Screen Size: 7.42 inches (but I bought it as a 9-inch)
Thank you in advance for the light and help ...
Greetings from the Middle of the World
Click to expand...
Click to collapse
Please im use this version it’s very good but I lose screen size and arabic language not having a best
Warch1ld77 said:
Hi there XDA member.
Anyone looking for the latest firmware for the Quad-Core T3 P1 - Board exdroid - Sun8iw11p1 - 4x ARM Cortex-A7 @ 1.60Ghz T3L 8035 2+32G IPS
V8.1.1_20210825.102119_THEME1.rar
drive.google.com
Extract Zip file to clean Fat32 formatted USB drive, make sure all 5 files are on the USB not in a folder.
open settings - Car settings and click the System Update - wait for Reboot and will flash.
YouTube instructions
Thank you
Extra settings password: 123456
Developer and Factory reset password: 7890
Click to expand...
Click to collapse
Thanks for your answer
I’m using it but don’t work with me please if you have others thinks
Today my ALLWINNER T3L car stereo
notified me of a new firmware update V8.1.1_20220104.150944_THEME1,has anyone tried this firmware?
command0 said:
Today my ALLWINNER T3L car stereo
notified me of a new firmware update V8.1.1_20220104.150944_THEME1,has anyone tried this firmware? View attachment 5527975
Click to expand...
Click to collapse
Yes i have installed it OTA. Seems bit more stable.
Currently i'm using 1G-16G model. For navigation i use waze.
For music player i installed PowerAmp. However PowerAmp or other music players will not detect incoming BT calls and mute+pause music. When using built in music app music gets paused when in BT call. But the built in player has no album art capabilities so this is why i use poweramp.
Hi Guys,
Anyone tried installing some CFW to this head unit? Like LineageOS or similar? System is mostly ok but me too stuck with stock themes app and stock music player.
Themes app is no big deal i'm mostly in the music player all the time. The bult-in music app is good and it works correctly when there is incoming calls from BT.
However the built-in music player is very plain and does not have ability to display album art. So i installed PowerAmp. But when using poweramp or any other music app these will not detect incoming BT call properly.
I feel it is the OS not properly sending the notification/API issue. Only the built-in player can detect this and pause.
Any ideas?
BR
Dilshad.
dilshadtheman said:
Yes i have installed it OTA. Seems bit more stable.
Currently i'm using 1G-16G model. For navigation i use waze.
For music player i installed PowerAmp. However PowerAmp or other music players will not detect incoming BT calls and mute+pause music. When using built in music app music gets paused when in BT call. But the built in player has no album art capabilities so this is why i use poweramp.
Click to expand...
Click to collapse
so you confirm me that the bluetooth has no problems with the new update? I read on XDA that a user after this update no longer works the Bluetooth, as regards the themes I use the webguro launcher and I even managed to activate ANDROID AUTO with a simple app
Hi, I'm here to share the latest T3L firmware:
Google drive: V8.1.1_20220104.150944_THEME1
Test on my current headunit T3L(hawkeye t3l)
Original OEM: TOPWAY (TOPWAY T3-A109D8-V5)
models: THEME1_0000
platform: T3L
MCU: STM32 (T3L.3.19-296-10-A49305-200715)
VARIANT: 1G+16GB
I obtain this firmware from this URL: http://iotdown.mayitek.com/1576561832/177245/fu-d6976-18e2-4a13-a2a5-838e33e39d88.zip
I fetch This URL inside the built-in FOTA update Log file at android/data/com.abupdate.fota_demo_iot/cache/iport_log.txt
hi,
when im pressing system update in car settings nothing is happening.
I copied only these 5 unpacked files on my 16gb usb stick formated to fat32
command0 said:
so you confirm me that the bluetooth has no problems with the new update? I read on XDA that a user after this update no longer works the Bluetooth, as regards the themes I use the webguro launcher and I even managed to activate ANDROID AUTO with a simple app
Click to expand...
Click to collapse
Yes there was a issue with bluetooth immediately after the update. The device name and BT password was blank and i could not update. I thought the update bricked bluetooth.
The solution was to play some music from the built-in music player. After using the built-in player once the bluetooth was back. I think the BT function is tightly integrated with the built-in music player somehow.
Can you share how you managed to get Android Auto installed? I could not find how to get this done.
For launcher i used CarWebGuru and it works ok.
dilshadtheman said:
Yes there was a issue with bluetooth immediately after the update. The device name and BT password was blank and i could not update. I thought the update bricked bluetooth.
The solution was to play some music from the built-in music player. After using the built-in player once the bluetooth was back. I think the BT function is tightly integrated with the built-in music player somehow.
Can you share how you managed to get Android Auto installed? I could not find how to get this done.
For launcher i used CarWebGuru and it works ok.
Click to expand...
Click to collapse
do you advise me not to update?
here is Android Auto
U can on bluetooth by going to car settings by password 123456 And then config sys unclick all then click on bs6 only then restart the system. All done
jitenderbhama said:
U can on bluetooth by going to car settings by password 123456 And then config sys unclick all then click on bs6 only then restart the system. All done
Click to expand...
Click to collapse
Thanks I solved, as for activating Android Auto just download the app on your carLink HeadunitReloaded I recommend the free version first, if your carstereo is supported then buy the Pro version
Hello!
I have an Allwinner navigation with 2G Ram and 32 Gb internal memory T3L p1.
Due to the fact that my Bluetooh couldn't work anymore, I did a factory reset but with a Google account - like a lost device!
Navigation starts and stays locked to the Android logo on the screen. I downloaded the firmware here from the forum and after many attempts like
on off, reset button etc the 5 files are installed. But it doesn't go beyond the Android logo. What else can I do?
fiq29_! said:
Hi, I'm here to share the latest T3L firmware:
Google drive: V8.1.1_20220104.150944_THEME1
Test on my current headunit T3L(hawkeye t3l)
Original OEM: TOPWAY (TOPWAY T3-A109D8-V5)
models: THEME1_0000
platform: T3L
MCU: STM32 (T3L.3.19-296-10-A49305-200715)
VARIANT: 1G+16GB
I obtain this firmware from this URL: http://iotdown.mayitek.com/1576561832/177245/fu-d6976-18e2-4a13-a2a5-838e33e39d88.zip
I fetch This URL inside the built-in FOTA update Log file at android/data/com.abupdate.fota_demo_iot/cache/iport_log.txt
Click to expand...
Click to collapse
hi
I downloaded the files, but after extracting what is the next step due to a lot of files.
can you please share a video for that?
I have this head Unit: https://www.aliexpress.com/item/1005002392442166.html?spm=a2g0o.productlist.0.0.6d3d1643cJfGHy&algo_pvid=2574a8fe-da57-4c5b-b90b-1896e65b5a39&algo_exp_id=2574a8fe-da57-4c5b-b90b-1896e65b5a39-0&pdp_ext_f={"sku_id":"12000022390036689"}&pdp_pi=-1;765.01;-1;[email protected];DKK;search-mainSearch
128gb / 8gb version.
HMI: TSKJ.G6.D.Q.F.V.2021.10.22.16.30
MCU: VHD-XHS-N10
Custom build version: alps-mp-q0.mp5-V2.122.1_pvetec.q0mp5.spm8666p1.64_P2
Build number: sys_mssi_spm_64_cn-userdebug 10 QP1A.190711.020 p5spm8666p164P2 test-keys
Junsun firmware (Tested): https://drive.google.com/file/d/1g1...w?spm=a2g0s.imconversation.0.0.761e3e5fKk3Vqp
Latest stock firmware: https://drive.google.com/file/d/1MyYOQRZbEZFFeJi9zSxfd7K9HiYohsJB/view?usp=sharing
jakemog said:
Mam tę jednostkę główną: https://www.aliexpress.com/item/1005002392442166.html?spm=a2g0o.productlist.0.0.6d3d1643cJfGHy&algo_pvid=2574a8fe-da57-4c5b-b90b-1896e65b5a39&algo_exp_id-da9074a8cfe 1896e65b5a39-0&pdp_ext_f={"sku_id":"12000022390036689"}&pdp_pi=-1;765.01;-1;[email protected];DKK;search-mainSearch
Wersja 128 GB / 8 GB.
Interfejs HMI: TSKJ.G6.DQFV2021.10.22.16.30
MCU: VHD-XHS-N10
Wersja kompilacji niestandardowej: alps-mp-q0.mp5-V2.122.1_pvetec.q0mp5.spm8666p1.64_P2
Numer kompilacji: sys_mssi_spm_64_cn-userdebug 10 QP1A.190711.020 p5spm8666p164P2 klucze testowe
Click to expand...
Click to collapse
mam podobne
apikanto said:
I have similar
Click to expand...
Click to collapse
Can you show a picture of your home screen? + are animation on?
Flashed successfully this firmware, the only thing I noticed is that the phone app crash at start, everything else works as expected
wszystko działa poprawnie
leskal said:
Flashed successfully this firmware, the only thing I noticed is that the phone app crash at start, everything else works as expected
Click to expand...
Click to collapse
Should only crash at 1st boot, working on getting the latest 8667Q Junsun firmware.
jakemog said:
Should only crash at 1st boot, working on getting the latest 8667Q Junsun firmware.
Click to expand...
Click to collapse
Unfortunately the crash remains after 2 reboots
leskal said:
Unfortunately the crash remains after 2 reboots
Click to expand...
Click to collapse
No crashes here, only when i open up the app
leskal said:
Unfortunately the crash remains after 2 reboots
Click to expand...
Click to collapse
You can change the default phone app with one from the play store, that could help.
Also I noticed that the igo nav app and the topaz app are missing, both are meaningless but worth mentioning it
leskal said:
Also I noticed that the igo nav app and the topaz app are missing, both are meaningless but worth mentioning it
Click to expand...
Click to collapse
If anyone is interested, I found a way to restore igo navigation with maps and everything
leskal said:
If anyone is interested, I found a way to restore igo navigation with maps and everything
Click to expand...
Click to collapse
Is google play store installed?
zakiid said:
Is google play store installed?
Click to expand...
Click to collapse
Of course but the igo unfortunately isn't restore via play store
I just recently bought https://www.amazon.com/dp/B09LV2DSY3?ref=ppx_yo2ov_dt_b_product_details&th=1 and I have similar firmware installed:
HMI:JYKJ.G6.D.Q.F.I.2021.11.04.09.00
MCU: G6-TS.210818(VHD-YT-9)
MEDIA: HC_v2.0.0_210825_1000(v1.84)
CAN: V3.28.017BYPS
BTV: BT.21,11.03.1140(04:7F:0E:91:17:09)
Baseband version
MOLY.LR12A.R3.MP.V159,MOLY.LR12A.R3.MP.V159
Kernel version
4.14.141 # 30 Thu Oct 21 08:46:33 CST 2021
Build number
sys_mssi_spm_64_cn-userdebug 10 QP1A.190711.020 p5spm8666p164P2 test-keys
Model FF_866X
Custom build version
alps-mp-q0.mp5-V2.122.1_pvetec.q0mp5.spm8666p1.64_P2
I have an issue with my bluetooth stopping every couple seconds when I'm trying to play it through the unit's apps, but Auto Link works fine. Also noticed the apps I'm moving from the app drawer to the launcher screens aren't saving after a reboot - same with the radio station presets that I'm saving.
Hello
I installed the first fireware and every time it turns off it changes the configuration, autolink asks me for an activation code and it came from series activated for the rest.
jakemog said:
I have this head Unit: https://www.aliexpress.com/item/1005002392442166.html?spm=a2g0o.productlist.0.0.6d3d1643cJfGHy&algo_pvid=2574a8fe-da57-4c5b-b90b-1896e65b5a39&algo_exp_id=2574a8fe-da57-4c5b-b90b-1896e65b5a39-0&pdp_ext_f={"sku_id":"12000022390036689"}&pdp_pi=-1;765.01;-1;[email protected];DKK;search-mainSearch
128gb / 8gb version.
HMI: TSKJ.G6.D.Q.F.V.2021.10.22.16.30
MCU: VHD-XHS-N10
Custom build version: alps-mp-q0.mp5-V2.122.1_pvetec.q0mp5.spm8666p1.64_P2
Build number: sys_mssi_spm_64_cn-userdebug 10 QP1A.190711.020 p5spm8666p164P2 test-keys
Junsun firmware (Tested): https://drive.google.com/file/d/1g1...w?spm=a2g0s.imconversation.0.0.761e3e5fKk3Vqp
Latest stock firmware: https://drive.google.com/file/d/1MyYOQRZbEZFFeJi9zSxfd7K9HiYohsJB/view?usp=sharing
Click to expand...
Click to collapse
with the first one you need an activation code for autolink and the configuration of both the home volume is changed ..... and if you put applications on the main screen when you turn off and turn on they disappear as they were at the beginning of the factory
Does anyone have AUTOLINK activation code or new firmware for MS98
THANK YOU
ollie6286 said:
I just recently bought https://www.amazon.com/dp/B09LV2DSY3?ref=ppx_yo2ov_dt_b_product_details&th=1 and I have similar firmware installed:
HMI:JYKJ.G6.D.Q.F.I.2021.11.04.09.00
MCU: G6-TS.210818(VHD-YT-9)
MEDIA: HC_v2.0.0_210825_1000(v1.84)
CAN: V3.28.017BYPS
BTV: BT.21,11.03.1140(04:7F:0E:91:17:09)
Baseband version
MOLY.LR12A.R3.MP.V159,MOLY.LR12A.R3.MP.V159
Kernel version
4.14.141 # 30 Thu Oct 21 08:46:33 CST 2021
Build number
sys_mssi_spm_64_cn-userdebug 10 QP1A.190711.020 p5spm8666p164P2 test-keys
Model FF_866X
Custom build version
alps-mp-q0.mp5-V2.122.1_pvetec.q0mp5.spm8666p1.64_P2
I have an issue with my bluetooth stopping every couple seconds when I'm trying to play it through the unit's apps, but Auto Link works fine. Also noticed the apps I'm moving from the app drawer to the launcher screens aren't saving after a reboot - same with the radio station presets that I'm saving.
Click to expand...
Click to collapse
I had similar issues, end up using a new launcher and it fixed the issues. Car launcher pro. I still have issues with call quality and reverse cam speed.
I have a simular unit from ossuret, the pin to change the car logo is 5678 and the pin to enter the factory menu is 8878
i hope that helps some people
I'm having the device bellow and got stuck with the bluetooth problem that no device can be paired.
I have ecu Bluetooth control where I can log wideband/tps/boost levels and so on but I can't connect(not obd)
It looks like that my bt stack is modified (like every other)
Is this going to fix it?
Can I upload this FW on the device?
Can.i.use external Bluetooth device to connect to my ecu (it is not obd connection)?
Has anyone used this link for the latest up date for Zlink?
ZLINK APK (Android App) - Free Download
Download: ZLINK for Android Auto / CarPlay APK (App) - ZLINK5 APK - ✔ Latest Version: 5.2.72 - Updated: 2023 - com.zjinnova.zlink - Zhijian Technology - Free - Mobile App for Android
apkcombo.com
Thanks
Hello,
I recently bought a TS18 unit and it came with Zlink 5 pre-installed. I performed a factory reset and the app disappeared, can anyone please provide a guide on how to restore the application?
Thank you so much!